This is required in order for us to support deterministic mode by
default. If multiple -D or -U options are specified on the command
line, the final one takes precedence. GNU ar also uses -U for this.
An equivalent change will be applied to ELF Tool Chain's version of ar.
PR: 196929
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3175
uart_bus_attach() during its test that 20 iterations weren't sufficient
for clearing all pending interrupts, assuming this means that hardware
is broken and doesn't deassert interrupts. However, under pressure, 20
iterations also can be insufficient for clearing all pending interrupts,
leading to a panic as intr_event_handle() tries to schedule an interrupt
handler not registered. Solve this by introducing a flag that is set in
test mode and otherwise restores pre-r253161 behavior of uart_intr(). The
approach of additionally registering uart_intr() as handler as suggested
in PR 194979 is not taken as that in turn would abuse special pccard and
pccbb handling code of intr_event_handle(). [1]
- Const'ify uart_driver_name.
- Fix some minor style bugs.
PR: 194979 [1]
Reviewed by: marcel (earlier version)
MFC after: 3 days
raw data to the doorbell offset in order to clarify the intent and for
avoiding unnecessarily converting the endianess back and forth.
Unfortunately, the same can't be done in mpt_recv_handshake_reply() as
16-bit data needs to be read using 32-bit bus accessors.
- In mpt_recv_handshake_reply(), get rid of a redundant variable.
MFC after: 1 fortnight
from x86 to use smp_ipi_mtx spin lock not only for smp_rendezvous_cpus()
but also for the MD cache invalidation, TLB demapping and remote register
reading IPIs due to the following reasons:
- The cross-IPI SMP deadlock x86 otherwise is subject to can't happen on
sparc64. That's because on sparc64, spin locks don't disable interrupts
completely but only raise the processor interrupt level to PIL_TICK. This
means that IPIs still get delivered and direct dispatch IPIs such as the
cache invalidation etc. IPIs in question are still executed.
- In smp_rendezvous_cpus(), smp_ipi_mtx is held not only while sending an
IPI_RENDEZVOUS, but until all CPUs have processed smp_rendezvous_action().
Consequently, smp_ipi_mtx may be locked for an extended amount of time as
queued IPIs (as opposed to the direct ones) such as IPI_RENDEZVOUS are
scheduled via a soft interrupt. Moreover, given that this soft interrupt
is only delivered at PIL_RENDEZVOUS, processing of smp_rendezvous_action()
on a target may be interrupted by f. e. a tick interrupt at PIL_TICK, in
turn leading to the target in question trying to send an IPI by itself
while IPI_RENDEZVOUS isn't fully handled, yet, and, thus, resulting in a
deadlock.
o As mentioned in the commit message of r245850, on least some sun4u platforms
concurrent sending of IPIs by different CPUs is fatal. Therefore, hold the
reintroduced MD ipi_mtx also while delivering cross-traps via MI helpers,
i. e. ipi_{all_but_self,cpu,selected}().
o Akin to x86, let the last CPU to process cpu_mp_bootstrap() set smp_started
instead of the BSP in cpu_mp_unleash(). This ensures that all APs actually
are started, when smp_started is no longer 0.
o In all MD and MI IPI helpers, check for smp_started == 1 rather than for
smp_cpus > 1 or nothing at all. This avoids races during boot causing IPIs
trying to be delivered to APs that in fact aren't up and running, yet.
While at it, move setting of the cpu_ipi_{selected,single}() pointers to
the appropriate delivery functions from mp_init() to cpu_mp_start() where
it's better suited and allows to get rid of the global isjbus variable.
o Given that now concurrent IPI delivery no longer is possible, also nuke
the delays before completely disabling interrupts again in the CPU-specific
cross-trap delivery functions, previously giving other CPUs a window for
sending IPIs on their part. Actually, we now should be able to entirely get
rid of completely disabling interrupts in these functions. Such a change
needs more testing, though.
o In {s,}tick_get_timecount_mp(), make the {s,}tick variable static. While not
necessary for correctness, this avoids page faults when accessing the stack
of a foreign CPU as {s,}tick now is locked into the TLBs as part of static
kernel data. Hence, {s,}tick_get_timecount_mp() always execute as fast as
possible, avoiding jitter.
PR: 201245
MFC after: 3 days
If apropos(1) and whatis(1) are not hardlinks to man(1) that means the system is
using mandocdb, then man -k should spawn apropos(1) and/or whatis(1) directly
Reported by: kevlo
Tested by: kevlo
Sponsored by: gandi.net
Summary:
Unlike FreeBSD, CloudABI does not use null terminated strings for its
pathnames. Introduce a function called copyin_path() that can be used by
all of the filesystem system calls that use pathnames. This change
already implements the system calls that don't depend on any additional
functionality (e.g., conversion of struct stat).
Also implement the socket system calls that operate on pathnames, namely
the ones used by the C library functions bindat() and connectat(). These
don't receive a 'struct sockaddr_un', but just the pathname, meaning
they could be implemented in such a way that they don't depend on the
size of sun_path. For now, just use the existing interfaces.
Add a missing #include to cloudabi_syscalldefs.h to get this code to
build, as one of its macros depends on UINT64_C().
Test Plan:
These implementations have already been tested in the CloudABI branch on
GitHub. They pass all of the tests.
Reviewers: kib, pjd
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D3097
- Use pointer assignment rather than a combination of pointers and
flags to switch buffers between unmapped and mapped. This eliminates
multiple flags and generally simplifies the logic.
- Eliminate b_saveaddr since it is only used with pager bufs which have
their b_data re-initialized on each allocation.
- Gather up some convenience routines in the buffer cache for
manipulating buf space and buf malloc space.
- Add an inline, buf_mapped(), to standardize checks around unmapped
buffers.
In collaboration with: mlaier
Reviewed by: kib
Tested by: pho (many small revisions ago)
Sponsored by: EMC / Isilon Storage Division
In the CloudABI code I sometimes call into cap_rights_* without
providing any arguments. Though one could argue that this doesn't make
sense, in this specific case it's hard to avoid, as the rights that
should be tested against are forwarded by a couple of wrapper macros.
most recently used buffer when we are under paging pressure. This is
a perversion of the buffer and page replacement algorithms and recent
improvements to the page daemon have rendered it unnecessary. In the
event that low-memory deadlocks become an issue it would be possible
to make a daemon or event handler that performs a similar action on
the oldest buffers rather than the newest. Since the buf cache
is analogous to the page cache and some minimum working set is desired
another possibility is to simply shrink the minimum working set which
has less downside now that file pages are not directly mapped.
Sponsored by: EMC / Isilon
Reviewed by: alc, kib (with some minor objection)
Tested by: pho
Apologies, this was how it was supposed to land. Mea culpa.
Differential Revision: https://reviews.freebsd.org/D3157
Reviewed by: gnn, hiren
Approved by: markj (mentor)
MFC after: 1 week
Driver must be able to start against older firmware that is missing
recently added MCDI calls, otherwise firmware upgrade will not be
possible.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D3145
1) We were not handling (or sending) the IN_PROGRESS case if
the other side (or our side) was not able to reset (awaiting more data).
2) We would improperly send a stream-reset when we should not. Not
waiting until the TSN had been assigned when data was inqueue.
Reviewed by: tuexen
- Allocate resources for MSI-X table and PBA if necessary
- Add function ahci_free_mem() to free all resources
Reviewed by: jhb, mav
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3009
Place all of the machine/pointer size independent code in a kernel
module called 'cloudabi'. All of the 64-bit specific code goes in a
separate module called 'cloudabi64'. The latter is only enabled on
amd64, as it is the only architecture supported.
Windows Server 2012 and earlier hosts.
Submitted by: whu
Reviewed by: royger
Approved by: royger
MFC after: 3 days
Relnotes: No
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D3086
- Fix segment registers to only display the low 16 bits.
- Remove unused handlers and entries for the debug registers.
- Display xcr0 (if valid) in 'show sysregs'.
- Add '0x' prefix to MSR values to match other values in 'show sysregs'.
- MFamd64: Display various MSRs in 'show sysregs'.
- Add a 'show dbregs' to display the value of debug registers.
- Dynamically size the column width for register values to properly
align columns on 64-bit platforms.
- Display %gs for i386 in 'show registers'.
Differential Revision: https://reviews.freebsd.org/D2784
Reviewed by: kib, markj
MFC after: 2 weeks
In the kernel, structs such as tcpstat are manipulated as an array of
counter_u64_t (uint64_t *), but made visible to userland as an array of
uint64_t. kread_counters() was previously copying the counter array into
user space and sequentially overwriting each counter with its value. This
mostly affects IPsec counters, as other counters are exported via sysctl.
PR: 201700
Tested by: Jason Unovitch
MFC after: 1 week
The i386 and amd64 DDB stack unwinders contain code to detect and handle
the case where the first frame is not completely set up or torn down. This
code was accidentally unused however, since db_backtrace() was never called
with a non-NULL trap frame. This change fixes that.
Also remove get_rsp() from the amd64 code. It appears to have come from
i386, which needs to take into account whether the exception triggered a
CPL switch, since SS:ESP is only pushed onto the stack if so. On amd64,
SS:RSP is pushed regardless, so get_rsp() was doing the wrong thing for
kernel-mode exceptions. As a result, we can also remove custom print
functions for these registers.
Reviewed by: jhb
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D2881
If we can't find a symbol corresponding to the faulting instruction, assume
that the previously-executed function is a call and attempt to find the
calling function using the return address on the stack. Otherwise we end
up associating the last stack frame with the current call, which is
incorrect and causes the unwinder to skip printing of the calling function,
resulting in a confusing backtrace.
Reviewed by: jhb
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D2859
Undefined symbols have a value of zero, so it makes no sense to return
such a symbol when performing a lookup by value. This occurs for example
when unwinding the stack after calling a NULL function pointer, and we
confusingly report the faulting function as uart_sab82532_class() on
amd64.
Convert db_print_loc_and_inst() to only attempt disassembly if we managed
to find a symbol corresponding to the IP. Otherwise we may fault and
re-enter the debugger.
Reviewed by: jhb
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D2858
