missing on the system. Instead of passing it by, mm was prompting...
bad mm, no cookie!
Brought to my attention by the PR, but the fix needed to be tweaked to
handle the auto-install option as well.
PR: misc/25731 Gilbert Gong <ggong@cal.alumni.berkeley.edu>
the -c option [when CONS_CLRHIST isn't defined]. This is okay since
the only time CONS_CLRHIST wouldn't be defined is when kbdcontrol is
being built in bootstrap-tools, and -c isn't needed then.
Submitted by: imp
The patch I used isn't quite the one Lars suggested, but the size
of the largest datagram you can recv isn't #defined anywhere, and
probably isn't even bounded for some protocols.
PR: 25050
Submitted by: Lars Eggert <larse@isi.edu>
forward or backward by a specified number of tracks (defaulting to 1).
Use strvisx() to display the media catalog in case it contains unprintable
characters. Sort includes. Based on two patches submitted by PR, plus
style fixes and other changes of my own.
Submitted by: Seth Kingsley <sethk@osd.bsdi.com>, Maxime Henrion <mux@qualys.com>
PR: bin/22672, bin/26962
MFC After: 1 week
Add a CAPI (hardware independent) driver i4bcapi(4) and hardware driver
iavc (4) to support active CAPI-based BRI and PRI cards (currently AVM
B1 and T1 cards) to isdn4bsd.
systems were repo-copied from sys/miscfs to sys/fs.
- Renamed the following file systems and their modules:
fdesc -> fdescfs, portal -> portalfs, union -> unionfs.
- Renamed corresponding kernel options:
FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS.
- Install header files for the above file systems.
- Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland
Makefiles.
page with *all* the permissible values.
This should really be spelt ipencap (as /etc/protocols does),
but a precedent has already been set by the ipproto array in
setkey.c.
It would be nice if /etc/protocols was parsed for the upperspec
field, but I don't do yacc/lex...
This change allows policies that only encrypt the encapsulated
packets passing between the endpoints of a gif tunnel. Setting
such a policy means that you can still talk directly (and
unencrypted) between the public IP numbers with (say) ssh.
MFC after: 1 week
The new syntax available in the config file is:
apm_battery [0-9]+(%|[Mm) (dis|)charging { ... }
The stuff in the braces is the same as the existing case. nn% checks for
a certain percentage of life remaining and nnM checks for a cerain
number of minutes remaining. Specifying "discharge" means that you're
interested in knowing when the battery reaches a certain level while AC
power is off, "charging" the opposite.
The man page needs to be updated.
The code can be fooled. If you SIGHUP the daemon and the battery level
matches a rule it will be performed once per SIGHUP. If the battery
level matches a rule and you repeatedly apply and take away AC power,
the rule will be run once per occurance. This, however, is a feature.
:-) The code also only runs when select() times out, so getting APM
events more often than the timeout interval will result in the rules not
being run. These are things that remain to be overcome.
Its main purpose is to adapt automatically to the floppy parameters
(in particular the track size for efficient reading), and to allow a
simple error recovery for CRC-errored sectors. Requires the newly
added fdc(4) options.
them.
Sysinstall used to check /var/run/ld.so.hints (aout related) and create
hints with the ldconfig command, but the ldconfig command alone will
generate elf hints only. The correct behavior is:
* If /var/run/ld-elf.so.hints does not exist, generate elf hints
* If /var/run/ld.so.hints does not exist, generate aout hints
(using ldconfig with the -aout option)
This will help ports that check for aout libraries using ldconfig in their
pkg-req scripts.
Approved by: jkh
MFC after: 1 weeks
warnx()+exit() with errx() and replace a big if..then..else construct
to determine the package download directory with a lookup table.
Reviewed by: jkh
MFC after: 2 weeks
/usr/share/syscons/keymaps. This should prevent word breakage when new keymaps
have been added.
Prompted by: Matthew D. Fuller <fullermd@over-yonder.net>
TLU event handler).
This used to be done as a side effect of SIOCAIFADDR'ing the interface,
but now that duplicate SIOCAIFADDRs are optimised out, we can't depend
on that behaviour.
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000
copper PHY. There are a whole bunch of very low cost cards available with
this chipset selling for $150USD or less. This includes the SMC9462TX,
D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards
from Addtron.
This chip supports TCP/IP checksum offload, VLAN tagging/insertion.
2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs.
I have not done serious performance testing with this driver. I know
it works, and I want it under CVS control so I can keep tabs on it.
Note that there's no serious mutex stuff in here yet either: I need
to talk more with jhb to figure out the right way to do this. That
said, I don't think there will be any problems.
This driver should also work on the alpha. It's not turned on in
GENERIC.
- check the msg.tsp_type value prior to using it as an
index into char *tsptype[]
- use strlcpy's instead of strcpy's
- & handle short packets properly.
Submitted by: "Andrew R. Reiter" <arr@watson.org>
Obtained from: OpenBSD
block sizes.
This orginally worked in PAO-3 and worked on their r330 branch but got
broken in PAO-3 around December 1998!
Approved by: imp
Obtained from: PAO-3
creation.
* Tag the internal err() function with __printflike to allow checking
for non-constant format string arguments (none exist)
* Use fmtcheck() to sanitize the tar command obtained via -t to make
sure it doesn't contain extraneous format operators.
Reviewed by: mikeh
MFC after: 1 week
longer includes machine/elf.h.
* consumers of elf.h now use the minimalist elf header possible.
This change is motivated by Binutils 2.11.0 and too much clashing over
our base elf headers and the Binutils elf headers.
of a/x -> b and then negotiate a/x -> c by simply expecting SIOCAIFADDR
to do the change.
This was broken by the last commit that optimised out the deletion and
re-addition of the same a/x -> b combination, and forgot to compare
the old/new destination addresses.
Conveniently enough, this problem didn't effect setups where the
default route goes via the ppp link, and most other setups don't
care what the the destination address is actually set to. It broke
test environments where ppp connects to the local machine rather
badly though....
account at creation, create accounts with a "*" password (so you can
use alternate authentication schemes without fearing a "default" password
biting you later), and blank passwords.
Yes, adduser could create a blank password account, but this makes it
slightly more difficult to shoot yourself in the foot.
The /etc/adduser.conf entries are:
# use password-based authentication for new users
# defaultusepassword = "yes" | "no"
defaultusepassword = "yes"
# enable account password at creation
# (the password will be prepended with a star if the account isn't enabled)
# defaultenableaccount = "yes" | "no"
defaultenableaccount = "yes"
# allow blank passwords
# defaultemptypassword = "yes" | "no"
defaultemptypassword = "no"
Requested by: alfred
Reviewed by: alfred
valid keyword handling and the holiday file processing
- don't issue a warning in case the holiday file is not found
- enable inclusion of ../Makefile.inc to reenable compiling-in monitor
support into isdnd
- update manual page, add a comma and correct authors mail address
This driver supports PCI Xr-based and ISA Xem Digiboard cards.
dgm will go away soon if there are no problems reported. For now,
configuring dgm into your kernel warns that you should be using
digi. This driver is probably close to supporting Xi, Xe and Xeve
cards, but I wouldn't expect them to work properly (hardware
donations welcome).
The digi_* pseudo-drivers are not drivers themselves but contain
the BIOS and FEP/OS binaries for various digiboard cards and are
auto-loaded and auto-unloaded by the digi driver at initialisation
time. They *may* be configured into the kernel, but waste a lot
of space if they are. They're intended to be left as modules.
The digictl program is (mainly) used to re-initialise cards that
have external port modules attached such as the PC/Xem.
after the port build/install. The former cleans up "dirty" port work
directories that happen to be lying around, and the latter cleans up
after we're done so that they won't trip up someone else.
PR: ports/25106
Submitted by: tim@bishnet.net, nik, mwm@mired.org
extensive pass through the rpcbind code soon, but I might as well
bring these in now.
- (NetBSD util.c r1.5) Move the initialisation of `tbuf' to avoid
a case where it could end up containing junk from the stack. This
should address the issue in PR bin/26806.
- (NetBSD util.c r1.6) Don't `merge' AF_LOCAL addresses, fix a few
memory leaks.
PR: bin/26806
Submitted by: Martin Blapp <mb@imp.ch>
Obtained from: NetBSD
/usr/X11R6/bin should be there. This helps all the ports that need to
run `mkfontdir' and error out as many port maintainers do not realize
`mkfontdir' isn't in the path.
Prompted by: pkg_add pcemu
make the code not automatically dead but actually use the debug level
in order to determine if output is needed. Fix non-existant from_addr()
by #define'ing it to inet_ntoa().
Remove hardcoded -g from Makefile.
Reported by: "John W. De Boskey" <jwd@bsdwins.com>
Tested by: "John W. De Boskey" <jwd@bsdwins.com>
We now unwrap IP/IP and apply filter rules to both the outer
layer (with ``set filter blah x.x.x.x y.y.y.y ipip'') and to
the payload (reinterpreted by the filter rules).
``set log tcp/ip'' will now show both the outer wrapper and
the (reinterpreted) payload contents.
always look up -network and -mask addresses numerically before
trying getnetbyname(). Without this, we may end up attempting DNS
queries on silly names such as "127.0.0.0.my-domain.com". See the
commit log from revisions 1.21 and 1.20 for further details.
removes the last path component until the mount() succeeds. However,
the code never checks if it has passed the mountpoint, so in some
cases where the mount() never succeeds, it can end up applying the
flags from a mounted filesystem to the underlying one.
Add a sanity check to the code which removes the last path component:
test that the fsid associated with the new path is the same as that
of the old one.
PR: bin/7872
a number of assumptions related to the parsing of options in
/etc/exports, and missed a few necessary new error checks.
The main problems related to netmasks: an IPv6 network address
missing a netmask would result in the filesystem being exported to
the whole IPv6 world, non-continuous netmasks would be made continuous
without any warnings, and nothing prevented you specifying an IPv4
mask with an IPv6 address.
This change addresses these issues. As a side-effect we now store
netmasks in sockaddr structs (this matches the kernel interface,
and is closer to the way it used to be). Add a flag OP_HAVEMASK to
keep track of whether or not we have successfully got a mask from
any source. Replace some mask-related helper functions with versions
that use the sockaddr-based masks.
Also tidy up get_net() and fix the code that interprets IPv4 partial
networks such as "127.1" as network rather than host addresses.
Properly zero out some structures that were ending up partially
containing junk from the stack, fix a few formatting issues, and
add a comment noting some assumptions about export arguments.
would call malloc, stdio and other library functions from the signal
handler which is not safe due to reentrancy problems.
Instead, add a simple handler that just sets a flag, and call the
more complex function from main() when necessary. Unfortunately to
be able to check this flag, we must expand the svc_run() call, but
the RPC library makes that relatively easy to do.
- Remove some horrible code that faked a "struct addrinfo" to be
later passed to freeaddrinfo(). Instead, add a new group type
"GT_DEFAULT" used to denote that the filesystem is exported to the
world, and treat this case separately.
- Don't clear the AI_CANONNAME flag in a struct addrinfo returned
by getaddrinfo. There's still a bit more struct addrinfo abuse
left in here.
- Simplify do_mount() slightly by using an addrinfo pointer to keep
track of the current address.
- Revert del_mlist() to its pre-tirpc prototype. Unlike NetBSD's version,
ours lets the caller generate any syslog() messages, so that it
can include the service name in the message.
- Initialise a few local variables to clarify the logic and avoid some
compiler warnings.
- Remove a few unused functions and local variables, and fix some
whitespace issues.
- Reinstate the logic for avoiding duplicate host entries that got
removed accidentally in revision 1.41 (added in r1.5). This bit
was submitted in a slightly different form by Thomas Quinot.
Submitted by: Martin Blapp <mb@imp.ch>,
Thomas Quinot <quinot@inf.enst.fr>
PR: bin/26148
group file. Because of the way the group sorting works while printing
out the new file it's not possible at this time to restore comments
in other locations, but at least they won't just disappear altogether.
one user who differs only by case. The other perl tools assume (or enforce)
the all lowercase requirement, therefore making the search through
master.passwd case insensitive seemed a reasonable optimization, IMO.
I understand, although I do not sympathize with, the argument that someone
might want to do this on purpose, and might subsequently want to use the
wrong tool for the job. So, this fix should hopefully satisfy both camps.
the following fixes had been made:
- check the size of the font being loaded and compare it with possible sizes
to minimise possibility of loading something that is not a fontfile at all
and turning console screen into garbage;
- prevent buffer overflow (and coredump as a result ) when loading valid
uuencoded file with size that exceeds allocated buffer;
- correct and improve several error messages.
Approved by: -audit, -hackers (silently)
being present in the environment if the user has CDROM defined, or
has specified a device on the command line.
This avoids users of ports like 'workman' that use these variables
getting gratuitous warnings from cdcontrol.
Suggested by: John Sellens <jsellens@generalconcepts.com>
Paxson et al, Status: Informational, May 1998), we should use "bits per
second" and "k" as 1000 not 1024 for throughput measures.
Submitted by: Eduardo Souza Machado da Silva <esms@acm.org>
that actually conforms to the Porters Handbook.
Add a -t option to pkg_version(1) for doing comparison testing.
Add a script (and make test target) to do some regression tests on
the package number comparison routine, to help debug future revisions.
Submitted by: knu
Procrastination by: bmah
Mschapv2 response generation may produce embedded NULs... causing
us to send a bogus response to the radius server and end up
failing the client's valid response.
Problem pointed out by: Eugene Vigovskiy <vigov@com2com.ru>
The usr.sbin/acpi/ utilities should be compiled non-static.
It just followed the usr.sbin/pccard/Makefile.inc way last time.
Pointed out by: ru and msmith
Committed at: BSD HANAMI in Japan 2001
Make sure we pass $(BUILDOPTS) to the `clean' target
so that `make clean' works on the same set of object
files. Otherwise, we may end up with an incorrectly
built and up-to-date object file.
NO_MAKEDEV_INSTALL and NO_MAKEDEV_RUN. The former implying the latter.
The names imply what they do. The last commit by DES based on a PR defeated
the original idea behind NO_MAKEDEV, which was not to run MAKEDEV, but to do
the installation of MAKEDEV. This should satisfy both parties on the MAKEDEV
challenge.
Reflect this in mergemaster, this might later on be decided to be set to
NO_MAKEDEV_INSTALL, for now I kept to the old behaviour.
NO_MAKEDEV_INSTALL and NO_MAKEDEV_RUN. The former implying the latter.
The names imply what they do. The last commit by DES based on a PR defeated
the original idea behind NO_MAKEDEV, which was not to run MAKEDEV, but to do
the installation of MAKEDEV. This should satisfy both parties on the MAKEDEV
challenge.
Reflect this in the documentation.
method anymore since the code inside the RPC library has changed too much.
Now that the clnt_dg module has the necessary code internally, we can yank
out the local method code and turn on the ASYNC hack with clnt_control().
This will make the -m flag work again.
and do the unregister/reregister work.
Don't call syslog in the unregister/reregister code as we haven't called
openlog() yet.
Be a more conservative about accepting errno values from socket(2),
only EPROTONOSUPPORT means that the kernel isn't supporting it
something like INET6. The other possible errnos would be returned
if there was a mistake in the socket(2) call so remove them from the
list of "acceptable" return values.
then wait for the connection to be closed by the peer.
This means that commands such as ``pppctl ... show links'' will
display the correct output again (rather than truncating it depending
on how much data arrived in the last packet).
aliases with the same netmask and destination, don't remove it and then
re-add exactly the same thing.
This means that static (non-sticky) routes that use the interface address
(or destination address) as a destination will not suddenly evaporate when
IPCP comes up (not unless the negotiated IPs have changed anyway).
/usr/src/usr.sbin/sysinstall/menus.c:1323: initializer element is not computable at load time
/usr/src/usr.sbin/sysinstall/menus.c:1323: (near initialization for `MenuNetworking.items[9].aux')
