Commit Graph

30 Commits

Author SHA1 Message Date
Ian Dowse
558791fdb5 Move the remaining entries from usbd.conf to devd.conf. This now
makes usbd redundant.

PR:		conf/73799
Submitted by:	Anish Mistry
2005-12-11 00:18:28 +00:00
Maksim Yevmenkin
e4638e53d8 Add section to start/stop Bluetooth USB devices (via ng_ubt(4))
Submitted by:	Panagiotis Astithas ( past at ebs dot gr )
Reviewed by:	brooks, imp
MFC after:	1 week
2005-11-12 03:42:56 +00:00
Sam Leffler
491e9810c0 eliminate the regex used to match ethernet and 802.11 devices;
instead use the interface's media-type

Reviewed by:	imp
MFC after:	1 week
2005-08-02 18:28:31 +00:00
Warner Losh
73ca9658a6 Add a couple of missing nic interfaces that have been added: iwi, ipw,
ral and ural.  Add a comment about this regexp being lame, which
should shock no-one.  Add a comment about why rescans are disabled on scsi
cards.
2005-07-28 03:51:54 +00:00
Brooks Davis
8e9e71f817 Support code for the OpenBSD dhclient. This significantly changes the
way interfaces are configured.  Some key points:

  - At startup, all interfaces are configured through /etc/rc.d/netif.
  - ifconfig_<if> variables my now mix real ifconfig commands the with
    DHCP and WPA directives.  For example, this allows media
    configuration prior to running dhclient.
  - /etc/rc.d/dhclient is not run at startup except by netif to start
    dhclient on specific interfaces.
  - /etc/pccard_ether calls "/etc/rc.d/netif start <if>" to do most of
    it's work.
  - /etc/pccard_ether no longer takes additional arguments to pass to
    ifconfig.  Instead, ifconfig_<if> variables are now honored in favor
    of pccard_ifconfig when available.
  - /etc/pccard_ether will only run on interfaces specified in
    removable_interfaces, even if pccard_ifconfig is set.
2005-06-07 04:49:12 +00:00
Marius Strobl
91ee05e122 Add esp(4) to scsi-controller-regex.
MFC after:	1 month
2005-06-04 21:05:37 +00:00
Maxim Sobolev
61a20ce696 Add cdce(4) into the list of ethernet interfaces. 2005-05-23 16:23:28 +00:00
Brian Somers
709acd0300 Run /etc/rc.d/syscons restart when a usb keyboard is attached so that the
keymap and other settings are correct.
2005-05-11 10:24:20 +00:00
Brooks Davis
e6da72a102 When ukbd0 arrives, attach to /dev/ukbd0 rather then /dev/kbd1 since
kbd1 might be something else.
2005-01-08 06:00:24 +00:00
Christian Brueffer
2b79cbbbd2 Changes in comments:
- correct a sentence so it actually has some meaning [1]
- sprinkle some full stops

Spotted by:	markus [1]
MFC after:	3 days
2004-12-25 00:12:27 +00:00
Christian Brueffer
18c7cda54a In the ethernet-nic-regex:
- add udav(4)

In the scsi-controller-regex:

- correct an entry
- move another one to the right place
- add a bunch of missing drivers

Glanced at by:	trhodes (scsi-controller-regex part)
MFC after:	3 days
2004-12-19 00:50:07 +00:00
Ian Dowse
6d2e81866e Move the purely device-name based entries for mice and ethernet
adapters from usbd.conf to devd.conf. USB ethernet devices were
already handled in devd.conf so this just removes their usbd.conf
entry.

PR:	conf/73799
2004-11-28 23:16:00 +00:00
Ruslan Ermilov
9528cdfa6e Removed the remnants of gx(4). 2004-11-08 20:24:52 +00:00
Bill Paul
a07bd003bf Add device driver support for the VIA Networking Technologies
VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY.
The vge driver has been added to GENERIC for i386, pc98 and amd64,
but not to sparc or ia64 since I don't have the ability to test
it there. The vge(4) driver supports VLANs, checksum offload and
jumbo frames.

Also added the lge(4) and nge(4) drivers to GENERIC for i386 and
pc98 since I was in the neighborhood. There's no reason to leave them
out anymore.
2004-09-10 20:57:46 +00:00
Gleb Smirnoff
b52b98d627 Add axe(4) to ethernet-nic-regex.
PR:		conf/71410
Submitted by:	Andrew Thompson <thompsa AT thingy.tbd.co.nz>
Approved by:	julian (mentor)
MFC after:	3 days
2004-09-06 20:09:00 +00:00
Brooks Davis
e3a9804180 When an USB keyboard is plugged in to a machine with a builtin keyboard,
cause the USB keyboard to take over from the builtin one.  This means my
laptop just works when I'm using it as a desktop.

Reviewed by:	imp
2004-09-01 00:08:15 +00:00
Warner Losh
bbcf4bf60d Disable rescanning of the scsi bus for the scsi controllers. There
are some that really hate this, so now that devd is default, be more
conservative about what we do.

Noticed by: marcel
2004-07-05 20:16:30 +00:00
Jens Schweikhardt
d8beb0fd3b Removed whitespace at BOF, EOL & EOF. 2004-06-06 11:46:29 +00:00
Colin Percival
0d9f6ca061 Fix odd grammar in comment.
PR:		docs/64190
Submitted by:	Dan Langille
2004-03-13 05:16:42 +00:00
Nate Lawson
526785c638 Notify the user (at kern.emerg) that the system will be shutting down if
it is still above the critical temperature on the next poll cycle.  This
is a 10 second advance notice by default.  Document the private
(non-standard) notify we will be using with devd(8).
2004-02-03 04:18:56 +00:00
Nate Lawson
3662033599 Add power_profile, a script that changes the ACPI CPU Cx idle state and/or
the throttling state in response to line transitions.  Future plans
include adding support for CPU frequency changes.

Add a devd.conf entry for calling this script.

The default values for this are:
performance_cx_lowest="HIGH"       # Use HLT (C0) online
performance_throttle_state="HIGH"  # 100% (no throttling)
economy_cx_lowest="LOW"            # Use the lowest Cx state possible
economy_throttle_state="HIGH"      # 100% (no throttling)
2003-12-18 04:39:57 +00:00
Nate Lawson
9b937d4836 Add devctl(4) notify support to ACPI. Various subsystems now notify
userland whenever events occur.  See the example in devd.conf below
to see how to use it.
2003-10-25 05:03:25 +00:00
Bill Paul
b9f78d2b4a Add a device driver for the Broadcom BCM4401 ethernet controller,
written by Stuart Walsh and Duncan Barclay (with some kibbitzing by
me). I'm checking it in on Stuart's behalf.

The BCM4401 is built into several x86 laptop and desktop systems. For the
moment, I have only enabled it in the x86 kernel config because although
it's a PCI device, I haven't heard of any standalone NICs that use it. If
somebody knows of one, we can easily add it to the other arches.

This driver uses register/structure data gleaned from the Linux
driver released by Broadcom, but does not contain any of the code
from the Linux driver itself. It uses busdma.
2003-09-09 18:17:23 +00:00
Bill Paul
3ad525ef3c Fix PATH: directive in sys/modules/re/Makefile, and add the re(4) driver to
devd.conf.

Pointed out by: Larry Rosenman
2003-09-08 03:24:29 +00:00
Warner Losh
4ccbfbeb64 Remove workaround that I had in place. devd didn't use to be able to
handle the empty section, but it has been able to do so for some time
now.
2003-08-22 02:18:01 +00:00
Warner Losh
e1519c7c55 Comment out the entire nomatch entry. The partially commented out
entry causes problems :-(

This effectively backs out the commit the re@ allowed me to commit.
2003-05-09 05:58:22 +00:00
Warner Losh
690f3e8486 Don't use logger by default just yet for unmatched devices. It is a
little too chatty on boot and doesn't give enough information.

Approved by: re@ (bmah)
2003-05-07 15:48:20 +00:00
Shunsuke Akiyama
11e04b0528 Add RealTek RTL8150 USB to fast Ethernet controller driver.
This driver now supports the Melco LUA-KTX and the GREEN HOUSE
GH-USB100B.

Reviewed by:	imp
MFC after:	2 weeks
2003-05-03 10:16:56 +00:00
Sam Leffler
58251a8dc0 add ath to the list of Ethernet devices 2003-03-07 23:43:09 +00:00
Warner Losh
99127de584 Move devd.conf here and install it by default (didn't do a repo copy
because there's so little history to save).

MFC After: 10 millifortnights
2003-01-09 04:05:06 +00:00