/h/des/src/sys/coda/coda_venus.c: In function `venus_ioctl':
/h/des/src/sys/coda/coda_venus.c:277: warning: cast from pointer to integer of
different size
/h/des/src/sys/coda/coda_venus.c:292: warning: cast from pointer to integer of
different size
/h/des/src/sys/coda/coda_venus.c: In function `venus_readlink':
/h/des/src/sys/coda/coda_venus.c:380: warning: cast from pointer to integer of
different size
/h/des/src/sys/coda/coda_venus.c: In function `venus_readdir':
/h/des/src/sys/coda/coda_venus.c:637: warning: cast from pointer to integer of
different size
Submitted by: des-alpha-tinderbox
- Make the VI asserts more orthogonal to the rest of the asserts by using a
new, common vfs_badlock() function and adding a 'str' arg.
- Adjust generated ASSERTS to match the new prototype.
- Adjust explicit ASSERTS to match the new prototype.
implement worthful VOP_BMAP() handler, so it expect the blkno not to be
changed by VOP_BMAP(). Otherwise, it'll have to find some tricky way to
determine if bp was VOP_BMAP()ed or not in VOP_STRATEGY().
PR: kern/42139
aac driver dependent on the linux emulation module. This was
especially bad for the release engineers who tried to move the
aac driver from the kernel onto the drivers floppy. The linux
compat bits for this driver are now in their own driver, aac_linux.
It can be loaded as a module or compiled into the kernel. For
the latter case, the AAC_COMPAT_LINUX option is needed, along with
the COMPAT_LINUX option.
I've tested this in every configuration I can think of. This is an
MFC candidate for 4.7.
Idea from: rwatson
MFC after: 3 days
unlocked accesses to v_usecount.
- Lock access to the buf lists in the various sync routines. interlock
locking could be avoided almost entirely in leaf filesystems if the
fsync function had a generic helper.
- Enable vfs_badlock_mutex by default.
- Assert that the vp is locked in VOP_UNLOCK.
- Use standard interlock macros in remaining code.
- Correct a race in getnewvnode().
- Lock access to v_numoutput with interlock.
- Lock access to buf lists and splay tree with interlock.
- Add VOP and VI asserts.
- Lock b_vnbufs with the vnode interlock.
- Add vrefcnt() for callers who want to retreive the vnode ref without
holding a lock. Add a comment that describes when this is safe.
- Add vholdl() and vdropl() so that callers who already own the interlock
can avoid race conditions and unnecessary unlocking.
- Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case.
- Hold the interlock before droping the mntlist_mtx in vflush() to avoid
a race.
- Fix locking in vfs_msync().
Linux driver defines 0x103[B-E] so add those as well.
Obtained from: Intel Linux e100 driver
MFC: Immediately if re@ allows it, otherwise after 4.7-RELEASE
function takes a struct ifnet pointer followed by the usual printf
arguments and prints "<interfacename>: " before the results of printf.
Since this is the primary form of printf calls in network device drivers
and accounts for most uses of the ifnet menber if_unit, this
significantly simplifies many printf()s.
of 1024- Ultra4 256). Rename 'requests' tag to 'request_pool' for clarity.
Make sure we do correct xpt_freeze_simq/CAM_RELEASE_SIMQ if we run out
of chip resources.
MFC after: 6 days
o Include <sys/select.h> from <sys/types.h> in the __BSD_VISIBLE case,
so applications and base software can be slowly updated.
o Prototype select() in <sys/select.h>. It was previously only
prototyped in <unistd.h>.
o Add some XXX's to <sys/types.h>.
Reviewed by: -standards
- nexus no longer has PCI bridges as direct children, so the PCI bus
ivar is no longer used and is removed.
- Don't attach default EISA, ISA, or MCA busses. Instead, if we do not
have an acpi0 device after bus_generic_probe(), add a legacy0 child
device.
- Remove machine/nexusvar.h.
ACPI or for when ACPI support is disabled or not present in the kernel.
Basically, the nexus device is now split into two with some parts
(such as adding default ISA, MCA, and EISA busses if they aren't found
as well as support for PCI bus device ivars) being moved to the legacy
driver.
o Move len initialization closer to place of its first usage.
o Compare len with 0 to improve readability.
o Explicitly zero out phlen in ip_insertoptions() in failure case.
Suggested by: jhb
Reviewed by: jhb
MFC after: 2 weeks
themselves cause a failure if it is told to use a __widget that there is
no implementation for them. missing an implementation for __unused etc is
harmless. But not having a __packed implementation when the kernel code
really needs it is a big deal.
static void const * const __set_##set##_sym_##sym
__attribute__((__section__("set_" #set),__unused__)) = &sym
becomes:
static void const * const __set_##set##_sym_##sym
__section("set_" #set) __unused = &sym
Like the other macros, these #define away for unrecognized compilers or
lint.
Also, fix the argments in the previous commit for the non-gcc case. lint
might be a bit happier about that. Note that the gcc <= 2.6 case
needs some research.
expand to __attribute__((packed)) and __attribute__((aligned(x)))
respectively. Replace the handful of gcc-ism's that use
__attribute__((aligned(16))) etc around the kernel with __aligned(16).
There are over 400 __attribute__((packed)) to deal with, that can come
later. I just want to use __packed in new code rather than add more
gcc-ism's.
In mpttimeout, call mpt_intr just on the offchance that we missed
an interrupt. We can check to see whether or not the command that
is timing out got completed.
When we *do* decide to timeout a command, set the command state to
REQ_TIMEOUT and then invoke another timeout (hz/10)- mpttimeout2.
This allows us to catch a couple cases we've seen where the command
we timed out on in fact is ready to be completed by the firmware.
In any case, it's only after mpttimeout2 is called that we actually
take down the private state and free the request itself. CAM has
been notified in mpttimeout anyway. This whole area should be redone,
but that will take 105% of my available game time for this month.
Fix a couple of missing (and not useful, at presnet) CAMLOCK_2_MPTLOCK
and MPTLOCK_2_CAMLOCK locations.
Split mpt_notify into mpt_ctlop, which handles all reply completions
that have 0x800000000 or'd into the ContextID. This function can, in
fact, call mpt_event_notify_reply, which handles the traditional
async event notifications. While we're at it, put in the extremely
important (but currently untested) code that send back an Ack to
an Event Notification (if the Event Notification is marked with
AckRequired). Note that an Ack also generates another ctlop completion,
tra la.
Fix up mpt_done substantially to try and get how we plug into CAM
correctly done. Remove bogus CAM_RELEASE_SIMQ settings.
Do some cleanups in mpt_action that are related to speed negotiation
for Ultra4 cards. This is an area that is still quite fragile and
worrisome as config data being read back often doesn't make sense or
jibe with the documentation.
At any rate, after these changes were done, I was finally able to
get Lars Eggert's dual 320M disk system to stay up under load all
weekend- hopefully we're in good enough for now shape.
MFC after: 1 week
Define the CFG_DAGA_OFF offset as 128 bytes instead of 40- gives us
a more reasonable headroom.
When reading a config page, zero out the entire request area- not just
the length of the request. This is because we cleverly (cheezily) return
configuration data back into the allocated request area, so it's nice
to make sure we start with a clean area to write on.
MFC after: 1 week
Instead, based upon whether ISP_DAC_SUPPORTED is defined, typedef
isp_dma_addr_t appropriately.
If ISP_DAC_SUPPORTRED is defined, the DMA_WD2/DMA_WD3 macros do something
useful, else they define to '0'.
defined, we set the address space limitation to BUS_SPACE_UNRESTRICTED,
otherwise to BUS_SPACE_MAXADDR_32BIT.
If we have a 1240, ULTRA2 or better, or an FC card, the boundary limit
is BUS_SPACE_UNRESTRICTED and segment limit is BUS_SPACE_MAXADDR_32BIT.
The older 1020/1040 cards have boundary and segment limits of
BUS_SPACE_MAXADDR_24BIT.
disabling memory write invalidate unconditionally. It looks like
they've decided that MWI just doesn't work with these devices.
Also, remove now-irrelevant code that set PCI write boundary values
based on the cache line size.
MFC after: 2 weeks
ALQ (Asynch. Logging Queues). ALQ supports many seperate queues with
different record and buffer sizes. It opens and logs to any vnode so
it can be used with character devices as well as regular files.
Reviewed in part by: phk, jake, markm
According to the MII specification, the delay produced by our
reads alone are sufficient for correct operation.
This reduces the time mii_tick takes from 10ms to ~1ms here. That's
still a lot, but much better than before.
Submitted by: Harti Brandt <brandt@fokus.gmd.de>
MFC after: 3 weeks
so that it is MI. Allow nfs_mountroot to return an error if the nfs_diskless
struct is not valid, rather than panicing later on. Call nfs_setup_diskless()
from nfs_mountroot if NFS_ROOT is defined, like bootpc_init(). Removed legacy
root mount support for sparc64, and enabled NFS_ROOT by default.
constants VM_MIN_ADDRESS, VM_MAXUSER_ADDRESS, USRSTACK and PS_STRINGS.
This is mainly so that they can be variable even for the native abi, based
on different machine types. Get stack protections from the sysentvec too.
This makes it trivial to map the stack non-executable for certain abis, on
machines that support it.
TrustedBSD MAC Perforce tree. Remove unused functions
mac_biba_equal_range and mac_mls_equal_range, which determined if the
ranges in two range-enabled labels were equal.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
use the notion that a subject range of (low-high) connotes Biba
privilege rather than a single of high.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
module and is not linked into the base system, two KASSERT's rotted.
Fix them by fixing variable names. It would be really nice if
opt_global.h was used when building modules as part of a buildkernel.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
target than any pre-C99 POSIX (which we could never have conformed to
under our ia32 ABI).
Document why HOST_NAME_MAX (and hopefully other similar constants in the
future) is not defined.
Define in <sys/unistd.h> all 1003.1-2001 option and option group constants
which did not meet the standard for inclusion in <unistd.h>. Delete from
<sys/unistd.h> all sysconf(3) constants and those option constants which
were moved to <unistd.h>. pathconf(3) keys remain here as pathconf() is
implemented directly as a system call. Add a comment noting brokenness
in some .1e additions here. Fix whitespace in definition of constants for
rfork().
(5 of 5)
and predictable way, and I apologize if I have gotten it wrong anywhere,
getting prior review on a patch like this is not feasible, considering
the number of people involved and hardware availability etc.)
If struct disklabel is the messenger: kill the messenger.
Inside struct disk we had a struct disklabel which disk drivers used to
communicate certain metrics to the disklayer above (GEOM or the disk
mini-layer). This commit changes this communication to use four
explicit fields instead.
Amongst the benefits is that the fields do not get overwritten by
wrong or bogus on-disk disklabels.
Once that is clear, <sys/disk.h> which is included in the drivers
no longer need to pull <sys/disklabel.h> and <sys/diskslice.h> in,
the few places that needs them, have gotten explicit #includes for
them.
The disklabel inside struct disk is now only for internal use in
the disk mini-layer, so instead of embedding it, we malloc it as
we need it.
This concludes (modulus any mistakes) the series of disklabel related
commits.
I belive it all amounts to a NOP for all the rest of you :-)
Sponsored by: DARPA & NAI Labs.
o Unusual order of #ifndef _FOO_H_, followed by license.
o Missing tabs in typedef.
o Missing tabs in struct between types and member names.
o Unaligned, unordered function prototypes.
o Reversed comment for #endif.
function were put in i386/i386/machdep.c from where it has been
cut and pasted to other architectures with only minor corruption.
Disklabel is really a MI format in many ways, at least it certainly
is when you operate on struct disklabel.
Put bounds_check_with_label() back in subr_disklabel.c where it belongs.
Sponsored by: DARPA & NAI Labs.
RXSTATE to STOPPED, but to WAIT. This should fix hangs which
could only be solved by replugging the cable.
Submitted by: jhb
Reviewed by: phk
MFC after: 2 weeks
Rename bioqdisksort() to bioq_disksort().
Keep a #define around to avoid changing all diskdrivers right now.
Move it from subr_disklabel.c to subr_disk.c.
Move prototype from <sys/disklabel.h> to <sys/bio.h>
Sponsored by: DARPA and NAI Labs.
Rename diskerr() to disk_err() for naming consistency.
Drop the by now entirely useless struct disklabel argument.
Add a flag argument for new-line termination.
Fix a couple of printf-format-casts to %j instead of %l.
Correctly print the name of all bio commands.
Move the function from subr_disklabel.c to subr_disk.c,
and from <sys/disklabel.h> to <sys/disk.h>.
Use the new disk_err() throughout, #include <sys/disk.h> as needed.
Bump __FreeBSD_version for the sake of the aac disk drivers #ifdefs.
Remove unused disklabel members of softc for aac, amr and mlx, which seem
to originally have been intended for diskerr() use, but which only rotted
and got Copy&Pasted at least two times to many.
Sponsored by: DARPA & NAI Labs.
- Get test for valid trace request contents right.
- You don't use 'stq' to move a value from one register to another,
use 'mov' to read sp. Also, can't use nice names for registers
in in-line asm in gcc.
- pc is not a publically accessible register, instead, create a label
in the asm code and use 'lda' to load the address of that label into
the pc field of the trace request.
- Use correction function name for db_print_backtrace().
NVIDIA API calls; more specifically, it adds an ioctl() handler for
the range of possible NVIDIA ioctl numbers.
Submitted by: Christian Zander <zander@minion.de>
the kernel. By default this is turned off since otherwise it could scroll
valuable panic messages off of the screen. This option can be turned on
by the DDB_TRACE kernel option as well as the debug.trace_on_panic sysctl.
Also, fix the DDB_UNATTENDED option to use its own header instead of
abusing opt_ddb.h. This way turning that one option on or off doesn't
force you to recompile all of ddb.
Requested by: many (1), bde (2*)
* - I know bde prefers !abusing option headers in general but can't
remember if he as brought up this specific case.
MD function is just a wrapper around db_stack_trace_cmd() that prints out
a backtrace of curthread. Currently, this function is only implemented
on i386 and alpha (and the alpha version isn't quite tested yet, will do
that in a bit). Other changes:
- For i386, fix a bug in the raw frame address case. The eip we extract
from the passed in frame address does not match the frame we received.
Thus, instead of printing a bogus frame with the wrong eip, go ahead
and advance frame down to the same frame as the eip we are using.
- For alpha, attempt to add a way of doing a raw trace for alpha. Instead
of passing a frame address in 'addr', pass in a pointer to a structure
containing PC and KSP and use those to start the backtrace. The alpha
db_print_backtrace() uses asm to read in the current PC and KSP values
into such a request.
Tested on: i386
Requested by: many
This patch addresses a bug that can cause a GPF in the kernel - if a
process makes use of i386_set_ldt to install a LDT entry, then loads
a corresponding segment descriptor into %gs, forks, and if the child
execs.
In this scenario, setregs executes user_ldt_free and then determines
how to reset the %gs register:
/* reset %gs as well */
if (pcb == curpcb)
load_gs(_udatasel);
else
pcb->pcb_gs = _udatasel;
This is insufficient in the fork/exec case, since pcb will be equal
to curpcb when the child execs; load_gs will reset %gs to _udatasel
but it doesn't reset pcb->pcb_gs; upon return from the system call,
cpu_switch_load_gs will thus attempt to restore %gs from pcb->pcb_gs
and trigger a GPF since all LDT entries have already been cleared.
The fix is to always reset pcb->pcb_gs to _udatasel.
Submitted by: Christian Zander <zander@minion.de>
Reviewed by: jake
wasn't doing. Rather than just lock and unlock the vnode around the call
to VOP_FSYNC(), implement rwatson's suggestion to lock the file vnode
in kern_link() before calling VOP_LINK(), since the other filesystems
also locked the file vnode right away in their link methods. Remove the
locking and and unlocking from the leaf filesystem link methods.
Reviewed by: rwatson, bde (except for the unionfs_link() changes)
header and return that length, was misguided.
The check itself didn't take into account the fact that the
mbuf pointer pased in may be null, and the function is
defined specifically for cases where the caller knows what it wants.
Rather than fix the check I'm removing it as phk suggested.
Submitted by: phk@freebsd.org
- remove test in pmap_activate that prevented vmspace sharing (v/rfork)
- always sync icache in pmap_enter until problems are sorted
- fix incorrect use of regions in pmap_kenter
- bring in pmap_release from NetBSD
- fix overwrite of bootstrap flag in pmap_pvo_enter
Approved by: benno
- sysctl for cacheline size, required by libc/rtld
- init'd more exception vectors
- fixed problem with register overwrite in exec_setregs
- removed redundant NetBSD code
Approved by: benno
