Commit Graph

245 Commits

Author SHA1 Message Date
Bruce Evans
e4b732cff1 The powerpc and sparc64 MD `reboot' commands should never have existed
since they just duplicated the MI `reset' command.  Instead of removing
them, make `reboot' an MI alias for `reboot' since this gives a better
way of killing the `r' alias for `reset'.  Remove the `registers' command
that was used to kill the alias.

Turn the powerpc and sparc64 MD `halt' command into an MI command.

A copy of sparc64/db_interface.c grew in sun4v just after I found the
extra reboot commands.  It has not been changed, and is now not
identical.  Duplicated commands come out duplicated in ddb's online
help, but cause large problems when used (e.g., on i386's with 2 halt's
and an hwatch, typing h doesn' give the expected message about an
ambiguous command, but hangs like the halt command or a looping parseri
would).
2006-10-10 07:26:54 +00:00
Bruce Evans
c7eeb59df0 Fixed loss of whitespace suppression at ends of lines. Whitespace
suppression is only needed at ends of lines, but rev.1.32 forced it
off precisely there.

The --More-- prompt is now cleared by explicitly forcing out the
whitespace in "\r        \r".  It might be better to use the line
editor's clearing functions, but these are currently static and not
much different.
2006-10-10 06:36:01 +00:00
Bruce Evans
75149ab872 Added some aliases:
- `b' is now an official alias for `break'.  It used to be an unofficial
  alias, but this was broken by adding the `bt' alias for `trace'.
- `t' is now an official alias for `trace'.  It used to be an unofficial
  alias, but this was broken by adding the `thread' command.
- `registers' is now an alias for `show registers'.  This is a hack to
  break the unofficial `r' alias for `reset'.  `r' really means
  `registers' in some debuggers, so I sometimes type it accidentally and
  am annoyed when it resets the system.  A short command shouldn't have
  such a large effect.  Now at least `res' must be typed to disambiguate
  `reset'.
2006-10-08 18:37:00 +00:00
Bruce Evans
2481da7487 Fixed formatting of printing of command tables. WIth the default max
output width of 79, only 6 columns of width 12 each fit, but 7 columns
were printed.

The fix is to pass the width of the next output to db_end_line() and
not assume there that this width is always 1.

Related unfixed bugs:
- 1 character is wasted for a space after the last column
- suppression of trailing spaces used to limit the misformatting, but
  seems to have been lost
- in db_examine(), the width of the next output is not know and is
  still assumed to be 1.
2006-10-08 18:15:08 +00:00
John Baldwin
d25168e14e Fix two nits in the ps header that offset each other making them largely
unnoticable.
2006-08-01 22:30:55 +00:00
John Baldwin
8b6d68671b Some cosmetic tweaks:
- Right justify 'pid' label.
- Move the uid column to the right 2 columns so that the 3 process id
  columns (pid, ppid, pgrp) are grouped together.
- Expand the uid column to 5 chars.
- Don't indent the tid for multithreaded processes.

Requested by:	bde (1, 2, 4)
2006-08-01 15:29:46 +00:00
John Baldwin
15cc91d345 Disable the pager for 'panic' and 'call' to be paranoid. 2006-07-19 18:26:53 +00:00
John Baldwin
19e9205a23 Simplify the pager support in DDB. Allowing different db commands to
install custom pager functions didn't actually happen in practice (they
all just used the simple pager and passed in a local quit pointer).  So,
just hardcode the simple pager as the only pager and make it set a global
db_pager_quit flag that db commands can check when the user hits 'q' (or a
suitable variant) at the pager prompt.  Also, now that it's easy to do so,
enable paging by default for all ddb commands.  Any command that wishes to
honor the quit flag can do so by checking db_pager_quit.  Note that the
pager can also be effectively disabled by setting $lines to 0.

Other fixes:
- 'show idt' on i386 and pc98 now actually checks the quit flag and
  terminates early.
- 'show intr' now actually checks the quit flag and terminates early.
2006-07-12 21:22:44 +00:00
Konstantin Belousov
d48b6d9ad6 Never zero-out db_last_symtab. Whan backtraces are done
in parallel in several threads, one symbol lookup could
clear db_last_symtab when another one going to use it as
starting point for traversal.

Approved by:	pjd (mentor)
MFC after:	1 month
2006-06-16 16:17:52 +00:00
John Baldwin
10fd453475 Use __LP64__ rather than the PTR64 hack.
Suggested by:	ru
2006-05-11 21:59:55 +00:00
John Baldwin
a421d57149 Sort includes. 2006-04-27 22:09:18 +00:00
John Baldwin
eefcd2a1e6 A whitespace fix.
Submitted by:	bde
2006-04-27 22:02:27 +00:00
John Baldwin
60b0d00999 Drop locking comments. ddb functions should never use locking anyway and
no other ddb functions try to annotate what locking would otherwise be
appropriate in comments.

Prodded by:	bde
2006-04-27 21:59:43 +00:00
John Baldwin
c9a08d1cad - Overhaul the 'ps' command in ddb to be mostly readable again. :) It is
now back to using fixed-size columns for output and each line of output
  should fit in 80 columns on both 32-bit and 64-bit architectures.  In
  general the output is close to that of the userland ps(1) with the
  exception that the 'wmesg' field is mostly similar to the "state" field
  in top(1) in that it will show either a wmesg, a lock name (prefixed with
  an *), "CPU xx" (for a running thread), or nothing if none of those three
  conditions are true.  It also respects td_name when listing threads in
  a multithreaded process.  There is a somewhat evilly-defined PTR64 macro
  I use to make account for the change in the size of the 'wchan' column
  in the formatted output (wchan is now the only pointer in the ps output
  and is available so it can be passed to 'show sleepq', 'show turnstile',
  or 'show lock').
- Add two new commands "show proc [process]" and "show thread [thread]"
  that show details about the specified process or thread (specified
  either by pid/tid or pointer), respectively.  If an address it not
  specified, it uses the current kdb thread.
2006-04-25 20:34:04 +00:00
John Baldwin
d605beaaa8 Add two helper functions: db_lookup_thread() and db_lookup_proc(). They
take the addr value passed to a ddb command and attempt to use it to
lookup a struct thread * or struct proc *, respectively.  Each function
first reparses the passed in value as if it was an ID entered in base 10.
For threads the ID is treated as a thread ID, for proceses the ID is
treated as a PID.  If a thread or proc matching the ID is found, it is
returned.  For db_lookup_thread(), if the check_pid argument is true and
it didn't find a thread with a matching thread ID, it will treat the ID as
a PID and look for a matching process.  If it finds one it returns the
first thread in the process.  If none of the ID lookups succeeded, then
the functions assume that the passed in address is a thread or proc
pointer, respectively.  This allows one to use tids, pids, or structure
pointers interchangeably in ddb functions that want to lookup threads or
processes if desired.
2006-04-25 20:22:48 +00:00
John Baldwin
cf93bc6617 Use LIST_FOREACH(). 2006-04-21 20:39:51 +00:00
John Baldwin
e1e31c0e43 Clean up the way we handle auxiliary commands for a given ddb command
table.  Previously, the ddb code knew of each linker set of auxiliary
commands and which explicit command list they were tied to.  These changes
add a simple command_table struct that contains both the static list of
commands and the pointers for any auxiliary linker set of additional
commands.  This also makes it possible for other arbitrary command tables
to be defined in other parts of the kernel w/o having to edit ddb itself.

The DB_SET macro has also been trimmed down to just creating an entry in
a linker set.  A new DB_FUNC macro does what the old DB_SET did which is
to not only add an entry to the linker set but also to include a function
prototype for the function being added.  With these changes, it's now also
possible to create aliases for ddb functions using DB_SET() directly if
desired.
2006-03-07 22:17:06 +00:00
Ruslan Ermilov
f4e9888107 Fix -Wundef. 2005-12-04 02:12:43 +00:00
John Baldwin
3924da21a3 - Rename 'traceall' to 'alltrace' so that the 'tr' shortcut for 'trace'
still works.  Also, this is consistent with 'show pcpu' vs
  'show allpcpu'.  (And 'show allstacks' on OS X for that matter.)
- Add 'bt' as an alias for 'trace'.  We already have a 'where' alias as
  well, so this makes it easier for gdb-wired hands to work in ddb.

Ok'd by:	rwatson (1)
Requested by:	scottl (2)
MFC after:	1 day
2005-10-24 15:21:36 +00:00
Olivier Houchard
da927f93bd - Call db_setup_paging() for traceall.
- Make it so one can't call db_setup_paging() if it has already been called
before. traceall needs this, or else the db_setup_paging() call from
db_trace_thread() will reset the printed line number, and override its
argument.
This is not perfect for traceall, because even if one presses 'q' while in
the middle of printing a backtrace it will finish printing the backtrace
before exiting, as db_trace_thread() won't be notified it should stop, but
it is hard to do better without reworking the pager interface a lot more.
2005-10-02 22:57:31 +00:00
Robert Watson
a7ad956bdf Add a DDB "traceall" function, which stack traces all known process
threads.  This is quite useful if generating a debug log for post-mortem
by another developer, in which case the person at the console may not
know which threads are of interest.  The output of this can be quite
long.

Discussed with:	kris
MFC after:	3 days
2005-10-02 11:41:12 +00:00
Marcel Moolenaar
216e80c2ba Move the prototypes of db_md_set_watchpoint(), db_md_clr_watchpoint()
and db_md_list_watchpoints() to ddb/ddb.h.
2005-09-10 03:01:25 +00:00
David E. O'Brien
cec9a4bf57 Remove the need to forward declare statics by moving them around. 2005-08-10 07:08:14 +00:00
Marcel Moolenaar
a2aeb24eff Implement functions calls from within DDB on ia64. On ia64 a function
pointer doesn't point to the first instruction of that function, but
rather to a descriptor. The descriptor has the address of the first
instruction, as well as the value of the global pointer. The symbol
table doesn't know anything about descriptors, so if you lookup the
name of a function you get the address of the first instruction. The
cast from the address, which is the result of the symbol lookup, to a
function pointer as is done in db_fncall is therefore invalid.
Abstract this detail behind the DB_CALL macro. By default DB_CALL is
defined as db_fncall_generic, which yields the old behaviour. On ia64
the macro is defined as db_fncall_ia64, in which a descriptor is
constructed to yield a valid function pointer.

While here, introduce DB_MAXARGS. DB_MAXARGS replaces the existing
(local) MAXARGS. The DB_MAXARGS macro can be defined by platforms to
create a convenient maximum. By default this will be the legacy 10.
On ia64 we define this macro to be 8, for 8 is the maximum number of
arguments that can be passed in registers. This avoids having to
implement spilling of arguments on the memory stack.

Approved by: re (dwhite)
2005-07-02 23:52:37 +00:00
Paul Saab
8cb038b4b2 Don't enter the debugger if KDB_UNATTENDED is set or if
debug.debugger_on_panic=0.

MFC after:	2 weeks
2005-04-20 20:52:46 +00:00
Peter Wemm
20984f2f04 rev 1.54 of i386/include/pcb.h depended on sys/proc.h. The prerequisite
was satisified for the rest of the kernel on the i386 build except for
these two files.  Rather than adding a submarine include to pcb.h, I've
added proc.h here.

I forgot to include these with the original commit. Sorry folks.
2005-04-14 05:25:40 +00:00
Warner Losh
dd3cb56845 Start each of the license/copyright comments with /*- 2005-01-06 01:34:41 +00:00
Robert Watson
a13aca1a8e When printing a stack trace for a thread, also print the pid and tid.
When a series of traces is included in a bug report, this will make it
easier to tie the trace information back to ps or threads output,
each of which will show the pid or the tid, but usually not both.
2004-11-23 23:11:47 +00:00
Robert Watson
2afce774e7 When printing information on the current thread, such as when entering
DDB, also print the pid of the process if present.  Since much
debugging still centers around processes, having the pid is quite
helpful.
2004-11-23 23:07:12 +00:00
Olivier Houchard
75f88c7ca4 Do not attempt to skip a breakpoint that is a result of a software single step,
or bad things happen.
2004-11-21 18:11:02 +00:00
David Schultz
626ff2081f Remove the uarea column from the DDB 'ps' display, and from grog's gdb
scripts.

Reviewed by:	arch@
2004-11-20 02:32:42 +00:00
John Baldwin
d39d4a6e64 - Change the ddb paging "support" to use a variable (db_lines_per_page) to
control the number of lines per page rather than a constant.  The variable
  can be examined and changed in ddb as '$lines'.  Setting the variable to
  0 will effectively turn off paging.
- Change db_putchar() to force out pending whitespace before outputting
  newlines and carriage returns so that one can rub out content on the
  current line via '\r     \r' type strings.
- Change the simple pager to rub out the --More-- prompt explicitly when
  the routine exits.
- Add some aliases to the simple pager to make it more compatible with
  more(1): 'e' and 'j' do a single line.  'd' does half a page, and
  'f' does a full page.

MFC after:	1 month
Inspired by:	kris
2004-11-01 22:15:15 +00:00
Julian Elischer
ed062c8d66 Refactor a bunch of scheduler code to give basically the same behaviour
but with slightly cleaned up interfaces.

The KSE structure has become the same as the "per thread scheduler
private data" structure. In order to not make the diffs too great
one is #defined as the other at this time.

The KSE (or td_sched) structure is  now allocated per thread and has no
allocation code of its own.

Concurrency for a KSEGRP is now kept track of via a simple pair of counters
rather than using KSE structures as tokens.

Since the KSE structure is different in each scheduler, kern_switch.c
is now included at the end of each scheduler. Nothing outside the
scheduler knows the contents of the KSE (aka td_sched) structure.

The fields in the ksegrp structure that are to do with the scheduler's
queueing mechanisms are now moved to the kg_sched structure.
(per ksegrp scheduler private data structure). In other words how the
scheduler queues and keeps track of threads is no-one's business except
the scheduler's. This should allow people to write experimental
schedulers with completely different internal structuring.

A scheduler call sched_set_concurrency(kg, N) has been added that
notifies teh scheduler that no more than N threads from that ksegrp
should be allowed to be on concurrently scheduled. This is also
used to enforce 'fainess' at this time so that a ksegrp with
10000 threads can not swamp a the run queue and force out a process
with 1 thread, since the current code will not set the concurrency above
NCPU, and both schedulers will not allow more than that many
onto the system run queue at a time. Each scheduler should eventualy develop
their own methods to do this now that they are effectively separated.

Rejig libthr's kernel interface to follow the same code paths as
linkse for scope system threads. This has slightly hurt libthr's performance
but I will work to recover as much of it as I can.

Thread exit code has been cleaned up greatly.
exit and exec code now transitions a process back to
'standard non-threaded mode' before taking the next step.
Reviewed by:	scottl, peter
MFC after:	1 week
2004-09-05 02:09:54 +00:00
Alexander Kabaev
0171fe42f2 Damage control. Correcly advance symtab and strtab pointers, not
table length values.

Spotted by:	iedowse
2004-07-28 08:59:08 +00:00
Alexander Kabaev
eec256de79 Avoid casts as lvalues. 2004-07-28 06:21:53 +00:00
Marcel Moolenaar
026c3aaa60 Oops... Add the CS_OWN flag to the trace and where commands so that
db_stack_trace() actually has a chance to parse its own arguments.
2004-07-21 05:55:51 +00:00
Marcel Moolenaar
fd32d93b97 Unify db_stack_trace_cmd(). All it did was look up the thread given
the thread ID and call db_trace_thread().
Since arm has all the logic in db_stack_trace_cmd(), rename the
new DB_COMMAND function to db_stack_trace to avoid conflicts on
arm.
While here, have db_stack_trace parse its own arguments so that
we can use a more natural radix for IDs. If the ID is not a thread
ID, or more precisely when no thread exists with the ID, try if
there's a process with that ID and return the first thread in it.
This makes it easier to print stack traces from the ps output.

requested by: rwatson@
tested on: amd64, i386, ia64
2004-07-21 05:07:09 +00:00
Marcel Moolenaar
f3be7cb3e9 Re-add the gdb command. It was removed to be replaced by something
more generic, but that didn't actually happen. Since the feature to
switch backends (and historically this means from DDB to GDB) is
important, make sure people can do just that until such the generic
mechanism actually sees the light of day.

Suggested by: rwatson@
2004-07-12 01:38:07 +00:00
Marcel Moolenaar
412e1faf02 Remove now unused files:
db_elf.c, db_kld.c: The new KDB backend supports both at the same time.
db_sysctl.c: The functionality has been moved to sys/kern/subr_kdb.c.
db_trap.c: The DDB entry point has been moved to sys/ddb/db_main.c.
2004-07-11 01:50:09 +00:00
Marcel Moolenaar
37224cd3fc Mega update for the KDB framework: turn DDB into a KDB backend.
Most of the changes are a direct result of adding thread awareness.
Typically, DDB_REGS is gone. All registers are taken from the
trapframe and backtraces use the PCB based contexts. DDB_REGS was
defined to be a trapframe on all platforms anyway.
Thread awareness introduces the following new commands:
	thread X	switch to thread X (where X is the TID),
	show threads	list all threads.

The backtrace code has been made more flexible so that one can
create backtraces for any thread by giving the thread ID as an
argument to trace.

With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
Bruce Evans
130ff9c31a Fixed DDB_NOKLDSYM on amd64's:
machdep.c:
Initialize the symbol table pointers, not quite like for other arches.

db_elf.c:
Don't claim to be an i486 in the fake ELF header.
2004-05-18 05:30:06 +00:00
Warner Losh
f36cfd49ad Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
Poul-Henning Kamp
74cc032b41 Give DDB a "watchdog" command which disables all watchdogs. 2004-02-29 09:55:32 +00:00
John Baldwin
44f3b09204 Switch the sleep/wakeup and condition variable implementations to use the
sleep queue interface:
- Sleep queues attempt to merge some of the benefits of both sleep queues
  and condition variables.  Having sleep qeueus in a hash table avoids
  having to allocate a queue head for each wait channel.  Thus, struct cv
  has shrunk down to just a single char * pointer now.  However, the
  hash table does not hold threads directly, but queue heads.  This means
  that once you have located a queue in the hash bucket, you no longer have
  to walk the rest of the hash chain looking for threads.  Instead, you have
  a list of all the threads sleeping on that wait channel.
- Outside of the sleepq code and the sleep/cv code the kernel no longer
  differentiates between cv's and sleep/wakeup.  For example, calls to
  abortsleep() and cv_abort() are replaced with a call to sleepq_abort().
  Thus, the TDF_CVWAITQ flag is removed.  Also, calls to unsleep() and
  cv_waitq_remove() have been replaced with calls to sleepq_remove().
- The sched_sleep() function no longer accepts a priority argument as
  sleep's no longer inherently bump the priority.  Instead, this is soley
  a propery of msleep() which explicitly calls sched_prio() before
  blocking.
- The TDF_ONSLEEPQ flag has been dropped as it was never used.  The
  associated TDF_SET_ONSLEEPQ and TDF_CLR_ON_SLEEPQ macros have also been
  dropped and replaced with a single explicit clearing of td_wchan.
  TD_SET_ONSLEEPQ() would really have only made sense if it had taken
  the wait channel and message as arguments anyway.  Now that that only
  happens in one place, a macro would be overkill.
2004-02-27 18:52:44 +00:00
Poul-Henning Kamp
9aece96fc0 Add DDB_NUMSYM option which in addition to the symbolic representation
also prints the actual numerical value of the symbol in question.

Users of addr2line(1) will be less proficient in hex arithmetic as a
consequence.

This amongst other things means that traceback lines change from:
   siointr1(c4016800,c073bda0,0,c06b699c,69f) at siointr1+0xc5
to
   siointr1(c4016800,c073bda0,0,c06b699c,69f) at 0xc062b0bd = siointr1+0xc5

I made this an option to avoid bikesheds.
~
~
~
2004-02-24 22:51:42 +00:00
Nate Lawson
5de6c5b5a5 If not in the debugger or if the user requests it with the
debug.ddb_use_printf sysctl, output kernel debugger data to both the
console and kernel message buffer via printf.  This fixes the case where
backtrace() went directly to the console and should help debugging greatly.
Thanks to Ian Dowse for the work, minor edits or any bugs are by myself.

Submitted by:	iedowse
2004-01-28 06:51:18 +00:00
Bruce Evans
f8191f94aa Reworked rev.1.14. Use the ELF symbol type again to summarily reject
some symbols in X_db_search_symbol().  Reject the same symbols that
rev.1.13 did (all except STT_OBJECT and STT_FUNC), except don't reject
typeless symbols.  This keeps the typeless symbols in non-verbosely
written assembler code visible, but makes file symbols invisible.  ELF
file symbols have type STT_FILE and value 0, so this stops small values
and offsets sometimes being displayed in terms of the first file symbol
in the kernel (usually device_if.c).  I think it rejects some other
unwanted symbols (small absolute symbols for things like struct offsets).
It may reject some wanted symbols (large absolute symbols for addresses
like PTmap).
2003-09-28 06:02:33 +00:00
Poul-Henning Kamp
71b797c176 Label the uarea address as such in DDB's ps output 2003-08-30 19:06:57 +00:00
Marcel Moolenaar
26502503e5 Further cleanup <machine/cpu.h> and <machine/md_var.h>: move the MI
prototypes of cpu_halt(), cpu_reset() and swi_vm() from md_var.h to
cpu.h. This affects db_command.c and kern_shutdown.c.

ia64: move all MD prototypes from cpu.h to md_var.h. This affects
madt.c, interrupt.c and mp_machdep.c. Remove is_physical_memory().
It's not used (vm_machdep.c).

alpha: the MD prototypes have been left in cpu.h with a comment
that they should be there. Moving them is left for later. It was
expected that the impact would be significant enough to be done in
a seperate commit.

powerpc: MD prototypes left in cpu.h. Comment added.

Suggested by: bde
Tested with: make universe (pc98 incomplete)
2003-08-16 16:57:57 +00:00
Hartmut Brandt
0ddc915c01 db_get_value uses a local buffer to first fetch all the bytes of a
integer value and then to construct the integer from it. This buffer
was sizeof(int) bytes long, which was fine until the (undocumented) 'g'
modifier for 8-byte integers was introduced. Change this to sizeof(uint64_t).
2003-08-12 13:24:21 +00:00