Commit Graph

1638 Commits

Author SHA1 Message Date
Brooks Davis
5c88c82cf3 Update tx(4) to always enable vlan(4) support.
Approved by:		semenu
2001-09-05 23:04:53 +00:00
Brooks Davis
9d4fe4b2b0 Make vlan(4) loadable, unloadable, and clonable. As a side effect,
interfaces must now always enable VLAN support.

Reviewed by:	jlemon
MFC after:	3 weeks
2001-09-05 21:10:28 +00:00
Bill Paul
1af8bec768 Add support for Conexant LANfinity miniPCI controllers. People who have
laptops with this chip should test this and report back as I don't have
access to this hardware myself. People with -stable systems should try
the patch at:

	http://www.freebsd.org/~wpaul/conexant.patch.gz

Submitted by:	Phil Kernick <Phil@Kernick.org>
2001-09-04 17:10:11 +00:00
Søren Schmidt
38090f05c2 Remove long overdue obsolete file ide_pcireg.h 2001-09-04 15:52:00 +00:00
Jonathan Lemon
cf9d4cbfc6 The fxp driver has lived in dev/fxp for some time, remove old files. 2001-08-31 02:21:03 +00:00
Doug Rabson
7e59bf6765 Recognise VIA Apollo KT133A bridge.
PR:	30061
Submitted by:	John Merryweather Cooper <jmcoopr@webmail.bmi.net>
MFC after:	1 week
2001-08-30 14:17:48 +00:00
Bill Paul
d93d282620 Add support for the 3c656B cardbus adapter. This is one half of a
dual function card. It needs pretty much the same flags as the 656C,
except that it seems to need both the INVERT_MII_PWR and INVERT_LED_PWR
flags set. Tested with cardbus in -current as of today.

Also added support for the 3c656, which looks to be the same as
the 656B, except it doesn't need the EEPROM_8BIT flag. I think. This
one is untested, but the added support should not break any of the
other cards.
2001-08-28 00:40:18 +00:00
Matt Jacob
38db9454de John Polstra
bogus additional write to WXREG_IMASK that enabled *all* interrupt causes
while I was trying to disable the chip. Oops.
2001-08-24 23:08:13 +00:00
Bill Paul
645ed1a78b Fix a bug in the ste_setmulti() routine. The NIC has 4 16-bit multicast
hash registers, not 2 32-bit ones. This would prevent the multicasr filter
from being programmed correctly in some cases.
2001-08-23 18:22:55 +00:00
Bill Paul
d3ab0d02cf After one more day of testing, make what I hope are the final tweaks to
prevent/workaround TX lockups in this driver. The secret seems to be to
not let the TX DMA queue become too full. If we have too many packets
in the queue, we should wait for them to drain a bit before trying to
queue more. This should prevent the lockup from occurring, and if it
does occur, there is special code in sf_start() to kick the NIC in the
head and get it going again.

Special thanks to Glen Neff for helping me test this fix.
2001-08-16 20:15:16 +00:00
Bill Paul
fa97ab323c Still more changes to try to prevent TX lockups. Will wait for one more
night of testing before merging to -stable.

Also added to code to detect TX underruns and automatically increase the
TX threshold to avoid them. Carefully placed diagnostig printf() about
this under #ifdef DIAGNOSTIC to avoid getting any panicky e-mails from
confused users, like I always do with the xl and dc drivers.
2001-08-16 00:32:20 +00:00
Bill Paul
0a4b345e9f Tweak the interrupt handler so that we call the txeof handler more often,
to hopefully prevent the TX DMA queue from filling up and never getting
flushed.
2001-08-15 17:46:57 +00:00
Bill Paul
0219a42155 Convert the if_sis and if_rl drivers to use the bus_dma API instead of
calling vtophys() and contigmalloc()/contigfree() directly. Hopefully,
I have shaken out all of the problems with busdma on the alpha now.
(Everything seems to work as expected.)

Also, change the max RX DMA limit to 1024 bytes instead of "unlimited,"
as the latter seems not to work correctly on the alpha that I tested.
(At 100Mbps, all attempts to receive frames yield RX errors.)
2001-08-15 17:38:43 +00:00
Semen Ustimenko
395a636fb2 Fix an bug in FreeBSD attach routine - attaching MII interfaces before doing
common_attach is wrong as common attach initialize some fileds used by
mediainit routine. This was hard to notify because loading driver as kld
lead to mediainit routine being called after common_attach, though probe_phy
is called before.

MFC after:	1 week
2001-08-13 18:37:31 +00:00
Semen Ustimenko
2c9067b16f Add support for 802.1Q VLAN and oversized ethernet frames.
PR:		kern/29235
Submitted by:	Peter Jeremy <peter.jeremy@alcatel.com.au>
Reviewed by:	Yar Tikhiy <yar@FreeBSD.org>
MFC after:	1 week
2001-08-13 18:32:39 +00:00
Bill Paul
0a75b55602 Pacify users who get all bent out of shape when they see the "xl%d: command
never completed" message. The RX reset takes longer complete than it
used to, a lot longer in fact than xl_wait() is prepared to wait.
When we do the RX reset in xl_reset(), this cases xl_wait() to time out
and whine. We wait a little extra time now after the RX reset, which
should silence the warning.

Thanks to obrien for finally getting me a box with a NIC that
causes this problem for me to tinker with.
2001-07-27 20:55:45 +00:00
Brooks Davis
bbce7eba7f IFT_8021_VLAN -> IFT_L2VLAN per if_vlan_var.h rev 1.9. With this change
LINT compiles, but doesn't link.
2001-07-25 00:19:59 +00:00
Kris Kennaway
56bded8a29 s/adress/address/
Inspired by:    OpenBSD
MFC After:      1 week
2001-07-23 12:05:27 +00:00
Bill Paul
e7be9f9a1a Deal with the condition where we lose link in the middle of transmitting
a bunch of frames. In this case, the dc_link flag is cleared, and dc_start()
stops draining the if_snd send queue, which results in lots of 'no buffers
available' errors being reported to applications. The whole idea behind
not draining the send queue until the link comes up was to avoid having
the gratuitous ARP being lost while we're waiting for autoneg to complete
after the interface is first brought up. As an optimization, change the
test in dc_start() so that we only bail if dc_link is not set _and_ there
are less than 10 packets in the send queue. If the queue has many frames
in it, we need to drain them. If the queue has a small number of frames
in it, we can hold off on sending them until the link comes up.

MFC after: 1 week
2001-07-12 22:51:59 +00:00
Bill Paul
75ff968cd5 Apply patch supplied by Jonathan Chen: use the correct arguments to
pci_enable_io(). We need to use SYS_RES_IOPORT/SYS_RES_MEMORY instead
of PCIM_CMD_PORTEN/PCIM_CMD_MEMEN.
2001-07-09 17:58:42 +00:00
John Baldwin
52b3919d31 Make these compile again by adding proc.h include for GIANT_REQUIRED
that is in included vm headers.
2001-07-05 21:28:47 +00:00
Benno Rice
beefc79739 Set vendor string correctly for the Apple KeyLargo.
Forgotten by:	benno
Spotted by:	n_hibma
2001-07-05 12:04:19 +00:00
Benno Rice
e5a44502dd Add device ID for the OHCI controller in the Apple KeyLargo chip. 2001-07-02 14:03:25 +00:00
Semen Ustimenko
1d57ebcdbf Add initializetion of NVCTL register with EEPROM stored value.
This fix hazardous very slow work for one of my cards.

MFC after:	1 week
2001-06-23 19:30:26 +00:00
Bosko Milekic
f5eece3fb9 Change m_devget()'s outdated and unused `offset' argument to actually mean
something: offset into the first mbuf of the target chain before copying
the source data over.

Make drivers using m_devget() with a first argument "data - ETHER_ALIGN"
to use the offset argument to pass ETHER_ALIGN in. The way it was previously
done is potentially dangerous if the source data was at the top of a page
and the offset caused the previous page to be copied (if the
previous page has not yet been appropriately mapped).

The old `offset' argument in m_devget() is not used anywhere (it's always
0) and dates back to ~1995 (and earlier?) when support for ethernet trailers
existed. With that support gone, it was merely collecting dust.

Tested on alpha by: jlemon
Partially submitted by: jlemon
Reviewed by: jlemon
MFC after: 3 weeks
2001-06-20 19:48:35 +00:00
Peter Wemm
d43c883ddc Fix warning:
298: warning: assignment makes pointer from integer without a cast
2001-06-15 07:42:58 +00:00
Peter Wemm
a074038186 Fix warnings:
412: warning: long unsigned int format, unsigned int arg (arg 3)
418: warning: long unsigned int format, unsigned int arg (arg 3)
424: warning: long unsigned int format, unsigned int arg (arg 3)
2001-06-15 07:39:12 +00:00
Bill Paul
357dfe502a Fix mindo:
PCN_BCR_CLRBIT(sc, PCN_BCR_MIICTL, PCN_MIICTL_DANAS);

should be:

	PCN_BCR_SETBIT(sc, PCN_BCR_MIICTL, PCN_MIICTL_DANAS);

Turning this bit on is what disables MII autoneg, not turning it off.
Without this, manually setting the media doesn't work.

Noticed by: Jim Browne <jbrowne@jbrowne.com>
2001-06-05 20:51:17 +00:00
Bill Paul
80157f80cd Grrr. Fix PR 27742 correctly this time. (At least I got -stable right.) 2001-06-01 00:34:50 +00:00
Bill Paul
7d1b125b93 Close PR #27742: allow the xl driver to receive VLAN tagged frames by
setting the 'max packet size' register in window 3. This only
works for cards based on the cyclone or newer chipsets (i.e. it
won't work with the original 3c905/boomerang cards).

There is a trick which will work with the boomerang, which is to turn
on the 'large packets ok' bit in the MAC control register, however this
lets the chip accept any frame up to 4K in length, which is larger than
the mbuf cluster buffers we use to receive frames. If somebody sends us
such a frame and the chip DMAs it to us, it could write past the end
of the cluster buffer and clobber something.

PR: kern/27742
2001-05-31 22:08:45 +00:00
Poul-Henning Kamp
f73cf22ade Vlan tags are 12 bits, mask off anything above since the chip doesn't
seem to do so for us.

PR:		27567
Submitted by:	Koji HINO hino@ccm.cl.nec.co.jp
MFC after:	1 week
2001-05-23 19:25:14 +00:00
Jun Kuriyama
da76f18bc6 Add description for 82801BA controller.
MFC after:	1 week
2001-05-21 01:24:14 +00:00
Alfred Perlstein
2395531439 Introduce a global lock for the vm subsystem (vm_mtx).
vm_mtx does not recurse and is required for most low level
vm operations.

faults can not be taken without holding Giant.

Memory subsystems can now call the base page allocators safely.

Almost all atomic ops were removed as they are covered under the
vm mutex.

Alpha and ia64 now need to catch up to i386's trap handlers.

FFS and NFS have been tested, other filesystems will need minor
changes (grabbing the vm lock when twiddling page properties).

Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
Bill Paul
11c2ec4153 Close PR 22208: bring chip out of suspend mode, because Windows might
have put the chip to sleep at shutdown. This is really only for the
VT6102, but it doesn't hurt the older chips.
2001-05-14 19:13:02 +00:00
Warner Losh
e7c00509d5 I'll be making some rather substantial changes to the pci attachment
of the pcic class of devices.  Go ahead and move it to the "usual"
place.  I say "usual" in quotes since it isn't exactly right (not in
dev/blah), but it is closer than before.
2001-05-13 01:52:55 +00:00
Bill Paul
84b86890ae Disable the 'stats counter overflow' interrupts since they can happen
much more often that expected and negatively impact performance when
running at 100mbps. I need to figure out if there's a better way to
handle this, but for now this shouldn't hurt anything.
2001-05-11 20:15:41 +00:00
Bill Paul
68e691b2ab The sk driver developed a bug when the multicast code was changed to
use TAILQ macros. The sk_attach_xmac() routine calls sk_init_xmac()
before doing the transceiver probe, but *before* ether_ifattach()
is called. This causes sk_init_xmac() to call sk_setmulti(), which
tries to do a TAILQ_FOREACH(), which it can't do because ether_ifattach()
hasn't done a TAILQ_INIT() yet. This causes a NULL pointer dereference
and panic in sk_setmulti() at driver load/initialization time.

Fixed by calling ether_ifattach() before the MII probe.

The code in RELENG_4 still uses the old way of enumerating the
multicast list and doesn't have this problem. Yet.
2001-05-09 18:22:42 +00:00
Warner Losh
84b00588d8 Ricoh RL5C46x cardbus bridges have the bits for 3E0 and 3E2. The
RL5C47x cards do not.  Only set them for that set of bridges.

Submitted by: shiba (Takeshi Shibagaki-san)
2001-05-08 02:28:41 +00:00
Warner Losh
bccfae2270 Add some additional register definitions for some work I have in progress. 2001-05-08 02:06:03 +00:00
Yoshihiro Takahashi
684ac05ae8 Move unused functions into #if 0 ... #endif. 2001-05-06 08:07:10 +00:00
Bill Paul
6263665f87 Fix the definitions for memory bank sizes, which I somehow got wrong.
The constant I was using was correct, but I mislabeled it as 256K when
it should have been 512K. This doesn't actually change the code, but
it clarifies things somewhat.

Submitted by:	Chuck Cranor <chuck@research.att.com>
2001-04-26 16:40:45 +00:00
Warner Losh
c18e19a64d Move setting of TI113X_PCI_CARD_CONTROL register sooner 2001-04-17 23:56:12 +00:00
Warner Losh
1f3da134c7 Minor comment that missed the last change 2001-04-17 23:50:24 +00:00
Warner Losh
82d3fe450d When booting, turn on the 3E0 compatibility address for ricoh cardbus
parts.  This is based on the newcard code that turns it off :-).  We
can now reboot after NEWCARD or Windows and have OLDCARD work.  Add
support for the RL5C466 while I'm at it.

Treat TI1031 the same as the CLPD6832.  It doesn't work yet, but sucks
less than it did before.

Also add a few #defines for other changes in the pipe.
2001-04-17 23:15:00 +00:00
Warner Losh
a9304a4eb5 Fix minor typo in comment. 112x -> 12xx 2001-04-11 22:49:00 +00:00
Matt Jacob
bab64fffde Several things:
1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from
Parag Patel. It was a fairly complete but not quite platform independent
job.

2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers
have (so the !)$*!)$*!$ fiber LIVENGOOD now works too).

3. Ansify the source.

So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
Matt Jacob
40be668926 Add in MII support for LICENGOOD copper part (10/100/1000). Add in some
more flags for verbose as well as debug printing.
2001-04-09 21:48:50 +00:00
Matt Jacob
91e6ce1b32 Pick up changes from Parag Patel and Kachun Lee, and self:
1. The offsets for some registers change in LIVENGOOD. Gratuitously.

2. Define LIVENGOOD and LIVENGOOD_CU part numbers. Add some more
specific LIVENGOOD defaults.

3. Add definitions for PHY support for the copper LIVENGOOD part
(10/100/1000).
2001-04-09 21:47:11 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Peter Wemm
b7a441ca87 Remove some unused stuff 2001-03-25 07:21:04 +00:00