packages intended to be included on the DVD, and
remove any nonexistent ports from the final list.
Print the list of missing paths, and ensure that
DVD_PACKAGES is non-zero length (which should never
happen).
MFC after: 3 days
X-MFC-With: r276820, r276822
Sponsored by: The FreeBSD Foundation
In 1.3.x and earlier, ABI format is, for example,
freebsd:11:x86:64.
In 1.4.x, ABI format is FreeBSD:11:amd64, and a new
configuration entry, ALTABI, is: freebsd:11:x86:64.
Export PKG_ABI and PKG_ALTABI accordingly, and if
PKG_ALTABI is set, create a symlink within the dvd
PKG_CACHEDIR so both new and old ABI directories
exist.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The ARM image builds build the in-tree gcc in order to build u-boot
and gperf is needed to build gcc, but is no longer installed on archs
that use clang.
Invoking the make targets as separate steps is done to work around
a build failure which is not yet fully understood.
Reviewed by: gjb, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1317
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
installation ISOs:
- TYPE, BRANCH, and REVISION are only defined if
OSRELEASE is not defined, so in situations where
one might set OSRELEASE for an in-house ISO build,
VOLUME_LABEL would be empty.
- makefs(8) limits the volume label to 32 characters,
which for the powerpc64 case, OSRELEASE expands to
FreeBSD-11.0-CURRENT-powerpc-powerpc64. Even with
removing the prefixing 'FreeBSD-', the string is 30
characters long, leaving zero room for suffixing the
type of ISO media (BO for bootonly, CD for cdrom, and
DVD for dvdrom).
Resolve these by defining VOLUME_LABEL when defining
OSRELEASE if unset. If OSRELEASE is defined by the
builder, use the OSRELEASE from that definition as the
VOLUME_LABEL.
In addition, for cases where both TARGET and TARGET_ARCH
are used for the VOLUME_LABEL, use TARGET_ARCH if it
differs from TARGET.
There are probably a few sharp edges here yet, but these
problems are going to affect the powerpc/powerpc64 builds
for 10.1-RELEASE, so the immediate concern is fixing the
underlying problem at hand quickly, and less so about the
elegance of the fix.
MFC after: 3 days
X-MFC-10.1: yes, asap
Sponsored by: The FreeBSD Foundation
r273076, r273077, r273079, r273095:
r273076:
Add a separate make(1) target to release/Makefile to
build FreeBSD virtual machine disk images for use on
the Microsoft Azure service.
For now, this target is not directly connected to the
build, however can be manually invoked.
The 'vm-azure' target invokes {amd64,i386}/mk-azure.sh,
which does the heavy lifting to produce proper VHDs.
mk-azure.sh uses a configuration file, defaulting to
tools/azure.conf if otherwise unset.
r273077:
Clear VM_RC_LIST.
r273079:
Fix signal list to trigger umount(8).
r273095:
Output an informational message when mkimg(1) runs, so it
does not appear that the process has stopped while waiting
for a 'y/n' response when waagent is deprovisioned.
Tested on: releng/10.1@r272876
MFC after: 3 days
X-MFC-10.1: yes
Sponsored by: The FreeBSD Foundation
r272436, r272437, r272792:
r272436:
Remove the first argument to panic(), which was initially
intended to be the exit code, however when a non-zero exit
code was returned to release/Makefile, this would prevent
any remaining (and possibly successful) stages from being
attempted.
r272437:
If the vm-base target fails, prevent the vm-image target
from being run since it cannot possibly succeed.
r272792:
Add /usr/local/bin and /usr/local/sbin to PATH, needed
if third-party software needs to use utilities outside
of the base system during post-install stages (indexinfo
is one culprit).
MFC after: 3 days
X-MFC-10.1: yes
Sponsored by: The FreeBSD Foundation
build FreeBSD virtual machine disk images for use on
the Microsoft Azure service.
For now, this target is not directly connected to the
build, however can be manually invoked.
The 'vm-azure' target invokes {amd64,i386}/mk-azure.sh,
which does the heavy lifting to produce proper VHDs.
mk-azure.sh uses a configuration file, defaulting to
tools/azure.conf if otherwise unset.
Sponsored by: The FreeBSD Foundation
Remove implementation of vm_prebuild_setup(),
vm_setup(), and vm_postbuild_setup().
It does not scale well, and I am not happy with
their implementation.
Sponsored by: The FreeBSD Foundation
- vm_prebuild_setup():
Steps to run prior to creating the file-backed
disk image.
- vm_setup():
Steps to run while the file-backed disk image
is mounted.
- vm_postbuild_setup():
Steps to run after the file-backed disk image
is dismounted.
The intention is to override as necessary via build
configuration files, as needed.
Sponsored by: The FreeBSD Foundation
if third-party software needs to use utilities outside
of the base system during post-install stages (indexinfo
is one culprit).
Sponsored by: The FreeBSD Foundation
intended to be the exit code, however when a non-zero exit
code was returned to release/Makefile, this would prevent
any remaining (and possibly successful) stages from being
attempted.
Sponsored by: The FreeBSD Foundation
r272234, r272236, r272262, r272264, r272269, r272271, r272272,
r272277, r272279, r272376, r272380, r272381, r272392, r272234,
r272412:
r272234:
Initial commit to include virtual machine images as part
of the FreeBSD release builds.
This adds a make(1) environment variable requirement,
WITH_VMIMAGES, which triggers the virtual machine image
targets when not defined to an empty value.
Relevant user-driven variables include:
o VMFORMATS: The virtual machine image formats to create.
Valid formats are provided by running 'mkimg --formats'
o VMSIZE: The size of the resulting virtual machine
image. Typical compression is roughly 140Mb, regardless
of the target size (10GB, 15GB, 20GB, 40GB sizes have been
tested with the same result).
o VMBASE: The prefix of the virtual machine disk images.
The VMBASE make(1) environment variable is suffixed with
each format in VMFORMATS for each individual disk image, as
well as '.img' for the source UFS filesystem passed to
mkimg(1).
This also includes a new script, mk-vmimage.sh, based on how
the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
were created (mk-vmimage.sh in ^/user/gjb/thermite/).
With the order in which the stages need to occur, as well as
sanity-checking error cases, it makes much more sense to
execute a shell script called from make(1), using env(1) to
set specific parameters for the target image than it does to
do this in make(1) directly.
r272236:
Use VMBASE in place of a hard-coded filename in the CLEANFILES
list.
r272262:
Remove a 'set -x' that snuck in during testing.
r272264:
release/Makefile:
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
r272269:
release/Makefile:
Include .OBJDIR in DESTDIR in the vm-base target.
release/release.sh:
Provide the full path to mddev.
r272271:
Fix UFS label for the root filesystem.
r272272:
Remove comments left in accidentally while testing, so the
VM /etc/fstab is actually created.
r272277:
Remove the UFS label from the root filesystem since it is added
by mkimg(1) as a gpt label, consistent with the fstab(5) entry.
r272279:
Comment cleanup in panic() message when mkimg(1) does not support
the requested disk image format.
r272376:
Separate release/scripts/mk-vmimage.sh to machine-specific
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
r272380:
Avoid using env(1) to set values passed to mk-vmimage.sh,
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
r272381:
After evaluating WITH_VMIMAGES is non-empty, ensure
the mk-vmimage.sh script exists before running it.
r272392:
Add WITH_COMPRESSED_VMIMAGES variable, which when set enables
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
r272412:
Document the new 'vm-image' target, and associated release.conf
variables.
r272413:
Remove two stray comments added during the initial iterations
of testing, no longer needed.
MFC after: 5 days
X-MFC-10.1: yes
Tested on: r272269, r272272, r272279, r272380, r272392
Sponsored by: The FreeBSD Foundation
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
Sponsored by: The FreeBSD Foundation
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
Sponsored by: The FreeBSD Foundation
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
Sponsored by: The FreeBSD Foundation
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
Sponsored by: The FreeBSD Foundation
of the FreeBSD release builds.
This adds a make(1) environment variable requirement,
WITH_VMIMAGES, which triggers the virtual machine image
targets when not defined to an empty value.
Relevant user-driven variables include:
o VMFORMATS: The virtual machine image formats to create.
Valid formats are provided by running 'mkimg --formats'
o VMSIZE: The size of the resulting virtual machine
image. Typical compression is roughly 140Mb, regardless
of the target size (10GB, 15GB, 20GB, 40GB sizes have been
tested with the same result).
o VMBASE: The prefix of the virtual machine disk images.
The VMBASE make(1) environment variable is suffixed with
each format in VMFORMATS for each individual disk image, as
well as '.img' for the source UFS filesystem passed to
mkimg(1).
This also includes a new script, mk-vmimage.sh, based on how
the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
were created (mk-vmimage.sh in ^/user/gjb/thermite/).
With the order in which the stages need to occur, as well as
sanity-checking error cases, it makes much more sense to
execute a shell script called from make(1), using env(1) to
set specific parameters for the target image than it does to
do this in make(1) directly.
Sponsored by: The FreeBSD Foundation
a symlink to All/pkg-*.txz in the Latest/ directory.
This allows 'pkg bootstrap' to work out-of-box if
the REPOS_DIR environment is properly set.
Tested on: stable/10@r271848
MFC after: 3 days
X-MFC-10.1: yes
Sponsored by: The FreeBSD Foundation
added to the footer of the release/doc/ pages by
moving a hard-coded value (that is subject to human
error to change) to release.ent where other values
are regularly changed, and adding parsing logic to
release.xsl.
Approved by: re (implicit)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
ports to prevent ports build failures from killing the
release build.
MFC after: 3 days
X-MFC-with: r270417, r270418
Sponsored by: The FreeBSD Foundation
where the target is not valid (stable/10), instead of doing
per-branch evaluation on if xdev-links needs to be invoked.
Sponsored by: The FreeBSD Foundation
r269549, r269551, r269552, r269553, r269554, r269555, r269558, r269559,
r269560, r269561, r269628, r269629, r269630, r269635, r269637:
r269549:
Create a new project branch, release-noxdev, for
a sandbox workspace outside of head/ to update the
release bits for arm builds since the deprecation of
the XDEV and XDEV_ARCH make(1) variables.
r269551:
Define load_chroot_env() and load_target_env()
prototypes.
r269552:
Call load_chroot_env() and load_target_env() where
they can be mutually conflicting with regard to
TARGET, TARGET_ARCH, XDEV, and XDEV_ARCH.
r269553:
Add shebang line to arm/*.conf files since these
should be considered to be executable (albeit not
on their own) shell scripts.
r269554:
Redefine load_chroot_env() and load_target_env() in
the arm/*.conf files, and reindent.
r269555:
Simplify where load_chroot_env() and load_target_env() are
called.
r269558:
Provide example in release.conf.sample for overriding the
load_chroot_env() and load_target_env() prototypes.
r269559:
Remove a gratuitous newline.
r269560:
Unset potentially conflicting variables in load_chroot_env()
and load_target_env().
r269561:
Make global variables global, and accessible outside of
the functions within which they were once defined.
r269628:
Remove XDEV/XDEV_ARCH evaluation if EMBEDDEDBUILD is set.
r269629:
In arm/release.sh, switch TARGET/TARGET_ARCH back to the
original XDEV/XDEV_ARCH make(1) variables.
In theory, this should have been a no-op, but the TARGET and
TARGET_ARCH are now unset in load_target_env() to avoid
collision with the chroot userland.
r269630:
Export variables in the arm/*.conf files because they
need to be passed through release.sh to arm/release.sh.
Set MK_TESTS=no for the xdev target.
r269635:
As part of the XDEV/XDEV_ARCH deprecation, the
'xdev-links' target was intentionally no longer
invoked automatically.
Invoke the xdev-links target after xdev, which
creates, for example, /usr/bin/armv6-freebsd-cc
symlink to /usr/armv6-freebsd/usr/bin/cc.
r269637:
Set TARGET and TARGET_ARCH to the XDEV and XDEV_ARCH
counterparts for the xdev and xdev-links make(1)
targets.
Sponsored by: The FreeBSD Foundation
continuing to use the variables in the configuration
file, but switch XDEV= and XDEV_ARCH= to TARGET= and
TARGET_ARCH= appropriately.
Sponsored by: The FreeBSD Foundation
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
example, explicitly hard-code gcc(1) as the compiler.
Partially revert r264703, which did a post-chroot install
of gcc(1). This was initially removed because gcc(1) fails
to build usr.bin/dtc/ causing the xdev target to fail. So
this time, move the gcc(1) installation after xdev is built.
This change is likely applicable to stable/10 arm build
failures, as well.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
r262491, r262493, r262516, r267345, r267397:
r262491:
Add DEBUG_DISTRIBUTIONS, and set it to include base and
EXTRA_DISTRIBUTIONS, excluding 'doc', since the documentation
distribution does not have corresponding debug information.
Use DEBUG_DISTRIBUTIONS in the 'distributeworld installworld'
and 'packageworld' targets, to reduce the number of occurances
of excluding distributions that do not have .debug files.
r262493:
In release/Makefile, explicitly set WITHOUT_DEBUG_FILES=1
for dvdrom and cdrom targets. (Later reverted.)
Exclude the *.debug.txz distributions from dvdrom and
cdrom images, but include them for ftp distribution.
r262516:
Rename ${dist}.debug.txz to ${dist}-dbg.txz to prevent the
following output:
eval: ${base....}: Bad substitution
eval: ${doc....}: Bad substitution
eval: ${games....}: Bad substitution
eval: ${lib32....}: Bad substitution
This also follows other naming conventions seen in the
wild.
r267345:
Explicitly set MK_DEBUG_FILES=no, which overrides the
WITH_DEBUG_FILES=1 and WITHOUT_DEBUG_FILES=1 collisions
previously experienced.
This change allows us to create the {base,kernel}_debug.txz
distributions without accidentally installing the *.debug
files on the medium itself.
r267397:
Remove evaluations of MK_DEBUG_FILES where not needed.
If DEBUG_DISTRIBUTIONS is empty, which is true if
MK_DEBUG_FILES evaluates to 'no' above, the loop does
nothing.
MFC after: 1 month
Tested on: head@r267801
Reviewed by: brooks [1], emaste, imp [1]
[1] earlier version
Sponsored by: The FreeBSD Foundation
This allows greater granular control over the release
build, and avoids WITH_FOO=1 and WITHOUT_FOO=1 collision.
This change was verified to produce correct results
compared to an earlier build by diffing find(1) output
of the resulting bootonly/, dvd/, and release/ directories.
Tested on: head@r267449
MFC after: 1 month
X-MFC-Note: Requires commits not yet MFC'd, so likely
longer than 1 month.
Sponsored by: The FreeBSD Foundation
remove the now-redundant checks for RELEASE_CRUNCH. This originally
was defined for building smaller sysinstall images, but was later also
used by picobsd builds for a similar purpose. Now that we've moved
away from sysinstall, picobsd is the only remaining consumer of this
interface. Adding these two options reduces the RELEASE_CRUNCH
special cases in the tree by half.
