__isnan() and __isnanf() must remain in libc for hysterical raisins.
On the other hand, __isnanl() must live in libm because libm uses it
internally and can't depend on older versions of libc to provide it.
Fortunately, we don't need __isnanl() in both libraries.
Prodded by: ale
PR: 71698
MT5 candidate
specified mutex is invalid. In spec parlance 'MAY FAIL' means it's
up to the implementor. So, remove the check for NULL pointers for two
reasons:
1. A mutex may be invalid without necessarily being NULL.
2. If the pointer to the mutex is NULL core-dumping in the
vicinity of the problem is much much much better than failing
in some other part of the code (especially when the application
doesn't check the return value of the function that you oh so
helpfully set to EINVAL).
full KSE support still have -lpthread as an alias for -lc_r. The only
thing that's different is the name of the knob that turns it off.
Pointed out by: ru@
POSIX threads libraries are not available. Add crypto support if
the crypto libraries are available. Build dnssec-{keygen,signzone}
if crypto is available.
Submitted by: (in part) dougb@
1. The correct cutoff for large uid/gid handling is 1<<18, not 1<<20.
2. Limit the uid/gid in the 'x' extension header (where numeric extensions
are not permitted) to 1<<18, but use the correct value in the regular
header (where numeric extensions are permitted).
Thanks to: Dan Nelson
MFC after: 3 days
caused by refering broken (uninitialized?) pointer which is retrieved
from __bt_new() (and from mpool_new()).
I don't know why this linp[0] is read before stored because this
should be controlled by .lower and .upper member of PAGE structure
which are correctly initialized.
But this workaround fixes the problem on my environment and this
module has #ifdef PURIFY option which initializes new and reused
memory from mpool by memset(p, 0xff, size) like as I did.
Please feel free to fix the real bug instead of my workaround.
transaction id from the request, this is useful for debugging.
Fix the autoh_freeall(3) function to properly free the array of
auto handles. Before it was freeing individual members of the list
OK, however it was then advancing the pointer and freeing the wrong
data for the whole list.
multibyte character support:
- In CHadd(), avoid writing past the end of the character set bitmap when
the opposite-case counterpart of wide characters with values less than
NC have values greater than or equal to NC.
- In CHaddtype(), fix a braino that caused alphabetic characters to be
added to all character classes! (but only with REG_ICASE)
PR: 71367
but with slightly cleaned up interfaces.
The KSE structure has become the same as the "per thread scheduler
private data" structure. In order to not make the diffs too great
one is #defined as the other at this time.
The KSE (or td_sched) structure is now allocated per thread and has no
allocation code of its own.
Concurrency for a KSEGRP is now kept track of via a simple pair of counters
rather than using KSE structures as tokens.
Since the KSE structure is different in each scheduler, kern_switch.c
is now included at the end of each scheduler. Nothing outside the
scheduler knows the contents of the KSE (aka td_sched) structure.
The fields in the ksegrp structure that are to do with the scheduler's
queueing mechanisms are now moved to the kg_sched structure.
(per ksegrp scheduler private data structure). In other words how the
scheduler queues and keeps track of threads is no-one's business except
the scheduler's. This should allow people to write experimental
schedulers with completely different internal structuring.
A scheduler call sched_set_concurrency(kg, N) has been added that
notifies teh scheduler that no more than N threads from that ksegrp
should be allowed to be on concurrently scheduled. This is also
used to enforce 'fainess' at this time so that a ksegrp with
10000 threads can not swamp a the run queue and force out a process
with 1 thread, since the current code will not set the concurrency above
NCPU, and both schedulers will not allow more than that many
onto the system run queue at a time. Each scheduler should eventualy develop
their own methods to do this now that they are effectively separated.
Rejig libthr's kernel interface to follow the same code paths as
linkse for scope system threads. This has slightly hurt libthr's performance
but I will work to recover as much of it as I can.
Thread exit code has been cleaned up greatly.
exit and exec code now transitions a process back to
'standard non-threaded mode' before taking the next step.
Reviewed by: scottl, peter
MFC after: 1 week
denote a directory. Unfortunately, in the presence of GNU or POSIX
extensions, this code was checking the truncated filename stored in the
regular header rather than the full filename stored in the extended
attribute. As a result, long filenames with '/' in just the right
position would trigger this check and be erroneously marked as
directories. Move the check so it only considers the full filename.
Note: the check can't simply be disabled for archives that contain
these extensions because there are some very broken archivers out
there.
Thanks to: Will Froning
MFC after: 3 days
since otherwise the initial seek offset will contain the directory
offset of the filesystem block that contained its directory entry.
This bug was mostly harmless because typically the directory is
less than one filesystem block in size so the offset would be zero.
It did however generally break loading a kernel from the (large)
kernel compile directory.
Also reset the seek pointer when a new inode is opened in read_inode(),
though this is not actually necessary now because all callers set
it afterwards.
By using r8 instead of r14 to do the swap, we put the dst argument
in the return register. Since bcopy() doesn't clobber r8, we don't
have to do anything else. This fixes ports/textproc/aspell.
documenting the obsoleteness of the msync(2) syscall and its single
remaining purpose.
PR: 70916
Submitted by: Radim Kolar <hsn@netmag.cz>
MFC after: 3 days
.h files. This simplifies the Makefile here a bit and makes it behave
better in a couple of situations. While I'm here, clean up some comments
and try to improve the organization a bit.
Thanks to: Ruslan Ermilov (The Marvelous Makefile Guru)
mpool_open(3) - it is *not* really used for synchronization; in fact,
it is not used at all.
PR: 70929
Submitted by: Martin Kammerhofer <dada@sbox.tugraz.at>
MFC after: 3 days
This should provide a big performance boost for folks using NIS or LDAP.
MFC after: 3 days
Thanks to: Jun Kuriyama (for reminding me that this was still on my TODO list)
This closes a security hole. Otherwise, libarchive will happily
extract into directories to which it lacks write permissions by
resetting the permissions during the extract.
Thanks to: Kris Kennaway
_mcount() stub when profiling is enabled. Emit this code sequence
for assembly routines as welli (MCOUNT definition in <machine/asm.h>.
We do not pass the GOT entry however as the 4th argument, because it's
not used. The _mcount() stub calls __mcount(), which does the actual
work. Define _MCOUNT_DECL to define __mcount. We do not have an
implementation of mcount(), so we define MCOUNT as empty, but have a
weak alias to _mcount() in _mcount.S.
Note that the _mcount() stub in the kernel is slightly different from
the stub in userland. This is because we do not have to worry about
nested routines in the kernel.
64 bit systems, years roughly -2^31 through 2^31 can be represented in
time_t without any trouble. 32 bit time_t systems only range from
roughly 1902 through 2038. As a consequence, none of the date munging
code for all the various calendar tweaks before then is present. There
are other problems including the fact that there was no 'year zero' and
so on. So rather than get excited about trying to figure out when the
calendar jumped by two weeks etc, simply disallow negative (ie: prior to
1900) years.
This happens to have an important side effect. If you bzero a 'struct
tm', it corresponds to 'Jan 0, 1900, 00:00 GMT'. This happens to be
representable (after canonification) in 64 bit time_t space. Zero tm
structs are generally an error and mktime normally returns -1 for them.
Interestingly, it tries to canonify the 'jan 0' to 'dec 31, 1899', ie:
year -1. This conveniently trips the negative year test above, which
means we can trivially detect the null 'tm' struct.
This actually tripped up code at work. :-/ (Don't ask)
GP register, because it's clobbered for calls across load modules. The
previous commit inserted the call to _init_tls() between the call to
atexit() and the restoration of the GP register clobbered by it. Fix:
restore GP before we call _init_tls().
Pointy hat: dfr@
19 column positions wide in the first line and 20 in the rest of the lines.
This fixes the example to provide the correct output.
PR: 53454
Noticed by: Kuang-che Wu <kcwu@kcwu.homeip.net>
Submitted by: Marc Silver <marcs@draenor.org>
Approved by: re (scottl)
simple errx() function.
Improve behavior when bzlib/zlib are missing by detecting and
issuing an error message on attempts to read gzip/bzip2 compressed
archives.
a knob to force process scope threads. If the environment variable
LIBPTHREAD_PROCESS_SCOPE is set, force all threads to be process
scope threads regardless of how the application creates them. If
LIBPTHREAD_SYSTEM_SCOPE is set (forcing system scope threads), it
overrides LIBPTHREAD_PROCESS_SCOPE.
$ # To force system scope threads
$ LIBPTHREAD_SYSTEM_SCOPE=anything threaded_app
$ # To force process scope threads
$ LIBPTHREAD_PROCESS_SCOPE=anything threaded_app
if it is true.
2.Add thread_db api td_thr_tls_get_addr to get tls address, the real code
is commented out util tls patch is committed.
Reviewed by: deischen
and close it) and "finish" (destroy the object) functions. For backwards
compat and simplicity, have "finish" invoke "close" transparently if needed.
This allows clients to close the archive and check end-of-operation
statistics before destroying the object.
LIBPTHREAD_SYSTEM_SCOPE in the environment.
You can still force libpthread to be built in strictly 1:1 by
adding -DSYSTEM_SCOPE_ONLY to CFLAGS. This is kept for archs
that don't yet support M:N mode.
Requested by: rwatson
Reviewed by: davidxu
is present for FreeBSD. If you "make distfile" on FreeBSD, you will
soon have a tar.gz file suitable for deploying to other systems
(complete with the expected "configure" script, etc). This latter
relies (at least for now) on the GNU auto??? tools. (I like autoconf
okay, but someday I hope to write a custom Makefile.in and dispense
with automake, which is somewhat odious.)
As part of this, I've cleaned up some of the conditional
compilation options, added make-foo to construct archive.h dynamically
(it now contains some version constants), and added some useful
informational files.
mode bits when setting permissions from ACL data.
Thanks to: David Gilbert for first reporting this and
Jimmy Olgeni for noticing that it only occurred on
ACL-enabled filesystems.
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
the chunk will never be added to the list in that case. Use type mbr
for GPT nested MBRs and use type part for any partition we don't know
or care about. Since the subtype is 0, this should not cause confusion.
libc. The externally-visible effect of this is to add __isnanl() to
libm, which means that libm.so.2 can once again link against libc.so.4
when LD_BIND_NOW is set. This was broken by the addition of fdiml(),
which calls __isnanl().
functions. Basically, the ip_next() function was used to get the PPTP and
Skinny headers when tcp_next() should have been used instead. Symptoms of
this included a segfault in natd when trying to process a PPTP or Skinny
packet.
Approved by: des
