Commit Graph

39 Commits

Author SHA1 Message Date
Joel Dahl
da52b4caaf Remove the advertising clause from UCB copyrighted files in usr.bin. This
is in accordance with the information provided at
ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change

Also add $FreeBSD$ to a few files to keep svn happy.

Discussed with:	imp, rwatson
2010-12-11 08:32:16 +00:00
Xin LI
821df508e8 Revert most part of 200420 as requested, as more review and polish is
needed.
2009-12-13 03:14:06 +00:00
Xin LI
6f2d322192 Remove unneeded header includes from usr.bin/ except contributed code.
Tested with:	make universe
2009-12-11 23:35:38 +00:00
Xin LI
93b9f50404 ANSIfy and remove register.
Resulting binary verified with strip(1)+md5(1).
2008-01-16 19:27:43 +00:00
Yaroslav Tykhiy
499a1062fa Add missing things: a prototype and a const qualifier.
Found by:	WARNS=4
2006-12-23 22:39:38 +00:00
Yaroslav Tykhiy
c19a20a7d1 Dynamically resize the Disk column. It was too narrow for modern
disk device names such as da0s1b.  So we also get rid of the nasty
constant 5 scattered over the code.

Implementing this change is a good chance to improve other bits
around it: init saved lengths early, always check return value from
kvm_getswapinfo().
2006-12-23 18:54:49 +00:00
Yaroslav Tykhiy
d668a4922f Clear to EOL after the end of meter so that its reading can decrease. 2006-12-23 18:03:10 +00:00
Yaroslav Tykhiy
b20870dbb5 Make it possible for meter to reach 100% mark when swap is totally full. 2006-12-23 17:46:32 +00:00
Yaroslav Tykhiy
c1b118da86 Improve style:
- Don't define vars inside loops.
- Avoid useless casts.
- Use C idioms.
- Do alike things in a consistent way.
2006-12-23 17:02:09 +00:00
Yaroslav Tykhiy
aee701a96e Reposition the "(swap not configured)" sign WRT the new layout. 2006-12-23 16:48:29 +00:00
Yaroslav Tykhiy
a3600374b4 Eliminate a couple of screen coordinate variables
that were useless and just obfuscated the code.
2006-12-23 16:39:09 +00:00
Yaroslav Tykhiy
12912b5a4a Add some vertical whitespace for easier reading. 2006-12-23 16:31:06 +00:00
Yaroslav Tykhiy
cb059cfe92 Fix the swap display further:
1) Resize the Used column to avoid screen overflow if BLOCKSIZE is long.
2) Track the current swap configuration so that its changes don't break
   the display.

Suggested by:	bde (1)
2006-12-23 15:40:41 +00:00
Yaroslav Tykhiy
7fb2f46a48 Fix the Total line shown if there are >1 swap devices. 2006-12-23 14:30:50 +00:00
Yaroslav Tykhiy
1f4d2a1d84 Start fixing the "swap" display by saving one horizontal position.
Now the display won't overflow the 80-char row if BLOCKSIZE=1024.
The new spacing is also consistent with the "pigs" display.
2006-12-23 14:25:17 +00:00
Yaroslav Tykhiy
65b02a0f4b Consistently mark percentage scales as such.
PR:		bin/101975
MFC after:	3 days
2006-11-27 20:19:05 +00:00
Bruce Evans
a9a3dcd64f Remove trailing whitespace.
Submitted by:	Se=E1n Farley <sean-freebsd at farley dot org>
PR:		bin/81874
2006-04-30 04:47:23 +00:00
Bruce Evans
8aa22952a9 Show the load average in the tcp display (it was already shown, perhaps
not very usefully, in all other displays).  This was the original point
of the PR.

Move the load average up by 2 so that it starts in row 0 for all windows
(2 lines above it were wasted for all other windows except vmstat).
Move everything below it up by 2 or 3 (3 for icmp and icmp6 which had
an extra blank line due from not compensating for the foot-shooting in
note (3); only ip and ip6 compensated).  Reduce the magic numbers related
to this.

Notes by the submitter:
%%%
1. All the subwin() calls are identical using #define MAINWIN_ROW 3
    (systat.h).
2. The load average is at the top of the window.
3. Each display starts on the fourth line.  I made changes to those
    displays that shifted the start line (i.e., icmp).  This entailed a
    lot of changes within the comments at the top of those displays.
4. For ip6, I shifted the "Input next-header histogram" column down one
    row to separate it from "IPv6 Output".  I raised "bad scope packets"
    and "address selection failed" up one row to stay with "IPv6 Input"
    (valid?).  They were down one row to probably line up at the bottom,
    but I think they should stick with their fellow items in a column.
5. I condensed ifstat a bit.  It had a lot of empty rows.
%%%

Submitted by:	Se=E1n Farley <sean-freebsd at farley dot org>
PR:		bin/81874
2006-04-30 04:26:46 +00:00
Mike Barcroft
3c392172d7 Back out rev 1.20; getbsize(3)'s original interface has been restored.
Approved by:	markm
2002-12-30 18:14:43 +00:00
Mark Murray
a09114536e Adjust for getbsize argument type change. 2002-10-23 19:02:17 +00:00
Mark Murray
4b51efd2b3 Remove unneeded function prototypes. 2002-10-23 16:20:12 +00:00
Warner Losh
3f330d7d1a remove __P 2002-03-22 01:42:45 +00:00
Mark Murray
9ff712b0f5 WARNS=2 fixes with NO_WERROR set, as there are some header issues
with namelists. use __FBSDID().
2001-12-12 00:13:37 +00:00
Kris Kennaway
096c40e3f3 Mark error() as __printflike() and fix a non-exploitable format string
error.

MFC after:	1 week
2001-05-25 23:15:05 +00:00
Thomas Moestl
342e2faa09 Get rid of setgid kmem for systat, and while being there, fix some bugs
and compiler warnings.
The data for network statistics are still obtained via the kvm interface
if systat was started with the needed privileges, otherwise sysctls are
used. The reason for this is that with really many open sockets, the
sysctl method is probably slower, but it systat -netstat is probably not
really usable in either mode under these conditions.

Approved by:	rwatson
2001-03-23 03:58:25 +00:00
Peter Wemm
540bc8d6e1 Quick Fix: swap.c doesn't appear to actually need <sys/conf.h>, so remove
it to try and get world building again.  (sys/conf.h now depends on
sys/types.h)
2000-08-24 20:22:44 +00:00
Poul-Henning Kamp
9df46d4a2a Don't include <sys/buf.h> 2000-05-05 15:41:22 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Peter Wemm
bf0e1ee370 Tidy up references to <sys/rlist.h> and support for the old swap management
that went away in January.
1999-05-11 14:32:18 +00:00
Matthew Dillon
300c6da23d Be nice when no swap is configured in system 1999-02-06 06:43:56 +00:00
Matthew Dillon
4aa513f41d Fix labeling bug 1999-01-22 10:57:50 +00:00
Matthew Dillon
e53c5e2053 Make systat -swap use new kvm_swapinfo() function 1999-01-22 10:53:13 +00:00
David E. O'Brien
d22889b821 Quiet many compiler warnings. 1998-10-08 09:56:10 +00:00
Warner Losh
448b84a0e4 o Use snprintf rather than sprintf
o Add more checks for buffer overflows
o Use snprintf rather than strcat/cpy and have better checks for max
  length exceeded.

Most of these changes are not exploitable buffer overruns, but it never
hurts to be safe.

Inspired by and obtained from: OpenBSD
1998-06-09 04:17:29 +00:00
Bruce Evans
a15f578988 Merge from Lite2 (print "??" instead NULL if devname() fails). More
faithful stealing from pstat would have given this already.
1997-07-06 04:37:22 +00:00
Joerg Wunsch
6b5d41d069 Fix the following old problem:
date: 1994/10/09 07:37:18;  author: davidg;  state: Exp;  lines: +7 -1
  #if 0'd out the meat of the swap code until I get a chance to rewrite it.

...mainly by stealing the code from pstat(8).
1997-01-12 19:38:32 +00:00
Rodney W. Grimes
7799f52a32 Remove trailing whitespace. 1995-05-30 06:41:30 +00:00
David Greenman
82c4eab0a7 #if 0'd out the meat of the swap code until I get a chance to rewrite it. 1994-10-09 07:37:18 +00:00
Rodney W. Grimes
9b50d90275 BSD 4.4 Lite Usr.bin Sources 1994-05-27 12:33:43 +00:00