Commit Graph

231 Commits

Author SHA1 Message Date
Ed Maste
e279f478f2 Clean up license text
- Renumber Regents clauses
- Remove clause 3 and 4 from TNF license, following upstream change
2013-12-29 18:44:12 +00:00
Aleksandr Rybalko
7a1a32c4ef o Add virtual terminal mmap request handler.
o Forward termianl framebuffer ioctl to fbd.
o Forward terminal mmap request to fbd.
o Move inclusion of sys/conf.h to vt.h.

Sponsored by:	The FreeBSD Foundation
2013-12-23 18:09:10 +00:00
Aleksandr Rybalko
27cf7d04ef Merge VT(9) project (a.k.a. newcons).
Reviewed by:	nwhitehorn
MFC_to_10_after:	re approval

Sponsored by:	The FreeBSD Foundation
2013-12-05 22:38:53 +00:00
Jung-uk Kim
10f1472e41 Reduce diff against stable/9 slightly. 2013-08-28 20:10:56 +00:00
Jung-uk Kim
663593f19f Do not save/restore video memory if we are not using linear frame buffer.
Note this partially revert r233896.
2013-08-28 19:06:22 +00:00
Jung-uk Kim
b1bba126f0 Make sure to free stale buffer before allocating new one for safety. 2013-08-28 18:13:37 +00:00
Jung-uk Kim
7afb475f63 Avoid unnecessary signedness conversion. 2013-08-28 17:58:30 +00:00
Jung-uk Kim
ba9855e380 Limit the amount of video memory we map for the driver to the maximum value.
This basically restores the spirit of r203535, which was partially reverted
in r205557, while we still map fixed amount to work around transient issues
we experienced with r203535.

Prodded by:	avg
Tested by:	avg
MFC after:	1 week
2013-03-27 18:06:28 +00:00
Oleksandr Tymoshenko
e1f04cd024 Piggyback MIPS changes and add ARM syscons support for devices with
framebuffer

While here - sort #if defined() order alphabetically
2012-08-25 23:59:31 +00:00
Robert Watson
8122a592ee Provide basic glue to allow syscons to be used on MIPS, modelled
on PowerPC support.  This was clearly not something syscons was
designed to do (very specific assumptions about the nature of VGA
consoles on PCs), but fortunately others have long since blazed
the way on making it work regardless of that.

Sponsored by:	DARPA, AFRL
2012-08-25 08:09:37 +00:00
Poul-Henning Kamp
00c5291f29 Fix the previous commit to only copy the data we were asked to and not
twice as much.

Spotted by:	Taku YAMAMOTO
2012-06-18 07:54:10 +00:00
Poul-Henning Kamp
fc9174db51 On certain newer Intel Atom based motherboards, for instance the
D2500CC which I have, syscons in text-mode fails to show the expected
contents due to write errors into video-memory.

At least one of the causes is that we copy from syscons internal buffer
to the video memory with optimized bcopy(9) which uses >16bit operations.

Until now, 32bit and wider operations have always worked on the video
memory, but since I cannot find a single source which says that this
SHALL work, and since these chipsets/bugs are now out there, this
commit changes syscons to always use 16bit copies on i386 & amd64.

This may be relevevant for PR's:
	166262
	166639
and various other bug reports floating elsewhere on the net, but
I lack hardware to test those.
2012-06-17 21:02:48 +00:00
Jung-uk Kim
5cf2cbca3f Fix a Clang warning.
Submitted by:	arundel
2012-04-16 23:29:12 +00:00
Jung-uk Kim
4db9b6c3c6 Save and restore VGA display memory between suspend and resume. 2012-04-04 22:02:54 +00:00
Jung-uk Kim
4c7a7f266f Do not copy VESA state buffer if the VBE call has failed for any reason.
Do not unnecessarily clear the state buffer before calling the function.
2012-04-04 21:38:26 +00:00
Jung-uk Kim
a3ad2822c4 Remove a useless warning. The mode information is unused for very long time
and this function may be used with VESA mode since r232069.
2012-04-04 21:19:55 +00:00
Jung-uk Kim
cd283487cc Do not reuse the previous address when restoring linear frame buffer. 2012-03-19 17:14:12 +00:00
Jung-uk Kim
9f5242849d Save and restore linear frame buffer between suspend and resume.
MFC after:	1 week
2012-03-17 00:00:33 +00:00
Jung-uk Kim
0b01dbd70b Remove unnecessary static variable initializations and duplicate codes.
Consistently use bcopy(9) over memcpy(9).
2012-03-16 23:54:23 +00:00
Jung-uk Kim
b1a499f3d8 Do not unnecessarily clear display memory when switching modes.
MFC after:	3 days
2012-03-16 19:22:29 +00:00
Jung-uk Kim
7e330e8220 If the VBE implementation does not support save/restore function, defer to
VGA methods.  Unconditionally reset the VESA adapter before restoring state.
2012-02-23 20:54:22 +00:00
Jung-uk Kim
e7d5cd47c5 Update my copyright date. 2012-02-23 19:16:05 +00:00
Jung-uk Kim
257e5645da Probe supported states for save/restore function. Some VBE implementation
refuses to save/restore states if an unsupported bit is set.
2012-02-23 19:05:57 +00:00
Jung-uk Kim
3dd6e888c0 Fix a typo introduced in r231843. 2012-02-23 18:59:32 +00:00
Jung-uk Kim
1556e63481 Set the initial mode for the adapter after executing VESA BIOS POST.
There is no need to set initial mode for BIOS.
2012-02-16 22:51:44 +00:00
Jung-uk Kim
2f18ee9d47 Make sure the VESA mode number is between 256 and 511 inclusive. 2012-02-16 22:46:00 +00:00
Jung-uk Kim
60474b7b97 Properly check VESA video mode number. 2012-02-16 22:33:53 +00:00
Ulrich Spörlein
62355ca27f Convert files to UTF-8 2012-01-15 13:23:43 +00:00
Ulrich Spörlein
9a14aa017b Convert files to UTF-8 2012-01-15 13:23:18 +00:00
Eitan Adler
dca400f352 - Add support for ASCII art splash screens in TheDraw format
PR:		kern/143370
Submitted by:	Antony Mawer <antony@mawer.org>
Reviewed by:	gjb (doc)
Reviewed by:	des (style)
Approved by:	ed
MFC after:	1 month
2011-12-12 21:12:07 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Marius Strobl
bda8e754a1 Make sparc64 compatible with NEW_PCIB and enable it:
- Implement bus_adjust_resource() methods as far as necessary and in non-PCI
  bridge drivers as far as feasible without rototilling them.
- As NEW_PCIB does a layering violation by activating resources at layers
  above pci(4) without previously bubbling up their allocation there, move
  the assignment of bus tags and handles from the bus_alloc_resource() to
  the bus_activate_resource() methods like at least the other NEW_PCIB
  enabled architectures do. This is somewhat unfortunate as previously
  sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY
  resources should be mapped into KVA, which is only necessary if their
  going to be accessed via the pointer returned from rman_get_virtual() but
  not for bus_space(9) as the later always uses physical access on sparc64.
  Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver
  also may deliberately not map them in if the firmware already has done so,
  possibly in a special way. So in order to still allow a driver to decide
  whether a SYS_RES_MEMORY resource should be mapped into KVA we let it
  indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as
  actually documented in the bus_space(9) page. This is implemented by
  allocating a separate bus tag per SYS_RES_MEMORY resource and passing the
  resource via the previously unused bus tag cookie so we later on can call
  rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now
  also allows to actually indicate that a SYS_RES_MEMORY resource should be
  mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and
  BUS_SPACE_MAP_READONLY respectively.
- Do some minor cleanup like taking advantage of rman_init_from_resource(),
  factor out the common part of bus tag allocation into a newly added
  sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace
  some homegrown versions with the generic counterparts etc.
- While at it, let apb_attach() (which can't use the generic NEW_PCIB code
  as APB bridges just don't have the base and limit registers implemented)
  regarding the config space registers cached in pcib_softc and the SYSCTL
  reporting nodes set up.
2011-10-02 23:22:38 +00:00
Marcel Moolenaar
01f7b6dad3 Use the preload_fetch_addr() and preload_fetch_size() convenience
functions to obtain the address and size of the bitmap splash image.

Sponsored by: Juniper Networks.
2011-02-13 19:25:48 +00:00
Jung-uk Kim
f6ff063a6e Fix segment:offset calculation of interrupt vector for relocated video BIOS
when the original offset is bigger than size of one page.  X86BIOS macros
cannot be used here because it is assumed address is only linear in a page.

Tested by:	netchild
2010-09-13 19:58:46 +00:00
Jung-uk Kim
90017de999 Disable video ROM shadowing by default as I originally intended. I found
a case where video ROM for an IGP is too tightly coupled with system BIOS
to get relocated.
2010-09-02 17:22:12 +00:00
Jung-uk Kim
c74dea9cc1 Make sure the interrupt entry point is within the video ROM range. We must
not change interrupt vector if it is not pointing the ROM itself.  Actually,
we just fail shadowing altogether if that is the case because the shadowed
copy will be useless for sure and POST may not be relocatable or useful.
While I'm here, fix a debugging message under bootverbose, really.  r211829
fixed one case but broke another.  Mea Culpa.
2010-08-31 20:21:52 +00:00
Jung-uk Kim
2b13785931 Fix a debugging message under bootverbose. This address is not linear. 2010-08-25 22:48:18 +00:00
Jung-uk Kim
a73f383ee9 Add an experimental feature to shadow video BIOS. Long ago, this trick was
supported by many BIOSes to improve performance of VESA BIOS calls for real
mode OSes but it is not our intention here.  However, this may help some
platforms where the video ROMs are inaccessible after suspend, for example.
Note it may consume up to 64K bytes of contiguous memory depending on video
controller model when it is enabled.  This feature can be disabled by
setting zero to 'debug.vesa.shadow_rom' loader tunable via loader(8) or
loader.conf(5).  The default is 1 (enabled), for now.
2010-08-25 22:09:02 +00:00
Jung-uk Kim
90f06c5eae Protect shared palette and state buffer with a mutex. Remove defunct
spltty() calls while I am here.
2010-08-07 05:46:04 +00:00
Jung-uk Kim
708358cdb6 Initialize a variable before its use. 2010-07-13 19:58:06 +00:00
Jung-uk Kim
917b850dce Preallocate buffers for palette and state. Do not save DAC registers as
we reset DAC mode and restore palette data while we are resuming always.
2010-07-13 19:48:20 +00:00
Jung-uk Kim
061b7e5463 Plug a possible memory leak.
Submitted by:	Yamagi Burmeister (lists at yamagi dot org)
2010-07-06 18:08:55 +00:00
Jung-uk Kim
c3cbd4125e Fix a possible null pointer dereference. A patch for -STABLE was
Submitted by:	Yamagi Burmeister (lists at yamagi dot org)
2010-07-06 18:05:05 +00:00
Jung-uk Kim
28ef508f86 Use M_WAITOK for VESA BIOS initialization consistently. 2010-06-23 23:34:56 +00:00
Jung-uk Kim
362487c0ba Let x86bios_alloc() pass contigmalloc(9) flags. Use it to set M_WAITOK
from VESA BIOS initialization.  All other malloc(9) uses in the function is
blocking any way.
2010-06-23 17:20:51 +00:00
Konstantin Belousov
95882b9865 Remove unused i586 optimized bcopy/bzero/etc implementations that utilize
FPU registers for copying. Remove the switch table and jumps from
bcopy/bzero/... to the actual implementation.
As a side-effect, i486-optimized bzero is removed.

Reviewed by:	bde
Tested by:	pho (previous version)
2010-06-23 10:40:28 +00:00
Jung-uk Kim
a46dd0b9e2 Restore the previous VESA mode after BIOS POST, just in case. 2010-05-18 22:30:55 +00:00
Jung-uk Kim
842795abcc Remove unnecessary pointer increment. A wrong pointer may be passed to
free(9) and it can cause kernel panic when there are multiple graphics
controllers in the system.

Tested by:	Brandon Gooch (jamesbrandongooch at gmail dot com)
MFC after:	3 days
2010-05-18 18:28:17 +00:00
Jung-uk Kim
004e8bae43 Allocate memory for VBE info block with malloc(9), not as static local. 2010-04-07 21:38:42 +00:00