requires that each 512 byte IO be in a single contiguous buffer, but if a
buffer crosses a page boundary and the physical pages aren't contiguous
you can get an EFBIG failure (too many segments).
The driver really should handle multiple segment IO, but before adding that
I wanted to make sure that it's handling failure properly while the failure
is easily recreatable.
moving the handling of curcmd->error != 0 to the end of the interrupt
handler. Also make sdhci_finish_data() idempotent by moving the setting
of slot->data_done = 1 down past the point where the busdma buffer is
unmapped. This allows for the possibility that the finish routine can
get called from multiple places when handling errors.
cache for whole page containing modified pte, and more, only last page
in the series of the consequtive pages is flushed (i.e. the affected
mappings should be larger than 2MB).
Avoid excessive flushing and do missed neccessary flushing, by
splitting invalidation and unmapping. For now, flush exactly the
range of the changed pte. This is still somewhat bigger than
neccessary, since pte is 8 bytes, while cache flush line is at least
32 bytes.
The originator of the issue reports that after the change,
'dmar_bus_dmamap_unload went from 13,288 cycles down to
3,257. dmar_bus_dmamap_load_buffer went from 9,686 cycles down to
3,517. and I am now able to get line 1GbE speed with Netperf TCP
(even with 1K message size).'
Diagnosed and tested by: Nadav Amit <nadav.amit@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
New segment at the list head may block all TRIM requests until txg of that
segment can be processed. On my random I/O tests this change reduce peak
TRIM list length from 650 to 450 segments. Hopefully it should reduce TRIM
burstiness when list processing is unblocked.
MFC after: 2 weeks
Poll for link state when the link is down, even for interrupt capable
PHYs.
Allow PHYs to report a dubious "partial" link. If this state is seen 3
consecutive times (each check is ~1s apart) then reset the PHY. This is
a workaround for a situation where repeatedly toggling the link from the
peer gets the AEL2005 PHY into a state where it never establishes a PCS
block lock even when everything is in order.
MFC after: 1 week
On FreeBSD gethrtime() implemented via getnanouptime(), that has 1ms (1/hz)
precision. It makes primary sort key (timestamp) collision very possible.
In such situations sorting by secondary key of LBA is much more reasonable
then by totally meaningless zio pointer value.
With this change on multi-threaded synchronous ZVOL read I've measured 10%
throughput increase and average latency reduction.
MFC after: 2 weeks
fallback targets to build the aic generated files. fmake doesn't like
the current construct, and since it doesn't have .MAKE.LEVEL, just
don't provide the fallback targets for fmake. This gives a little
extra compatibility to old systems trying to build new kernels at
almost no cost to the current code.
In my case on the test machine, I have hierarchy of
pcib2 (PCIe port on host bridge with PCIe capability) -> pci2 ->
pcib3 (ITE PCIe/PCI bridge) -> pci3 -> em1
The device to check PCIe capability is pcib2 and not pcib3, as it is
currently done in the code. Also, in case of the bridge, we shall
step to pcib2 for the loop iteration, since pcib3 does not carry PCIe
capability info and would force wrong recalculation of rid.
Also change the returned requester to the PCIe bus which provides port
for the bridge. This only results in changing
hw.busdma.pciX.X.X.X.bounce tunable to force identity-mapped context
for the device.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
