Unlike the existing GLA2GPA ioctl, GLA2GPA_NOFAULT does not modify
the guest. In particular, it does not inject any faults or modify
PTEs in the guest when performing an address space translation.
This is used by bhyve's debug server to read and write memory for
the remote debugger.
Reviewed by: grehan
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D14075
The conditional compilation support is now centralized in
tcp_fastopen.h and tcp_var.h. This doesn't provide the minimum
theoretical code/data footprint when TCP_RFC7413 is disabled, but
nearly all the TFO code should wind up being removed by the optimizer,
the additional footprint in the syncache entries is a single pointer,
and the additional overhead in the tcpcb is at the end of the
structure.
This enables the TCP_RFC7413 kernel option by default in amd64 and
arm64 GENERIC.
Reviewed by: hiren
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14048
When I wrote the patch, I wanted to remove SYSINIT() usage from amd64 code.
There is no reason to keep the divergence any more because iwasaki merged
most amd64 suspend/resume code to i386 with r235622. Note this also fixed
an enge case reported by royger. [1]
Suggested by: jhb
Reviewed by: royger
Tested by: royger [1]
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14400 [1]
No implementation of fpu_kern_enter() can fail, and it was causing needless
error checking boilerplate and confusion. Change the return code to void to
match reality.
(This trivial change took nine days to land because of the commit hook on
sys/dev/random. Please consider removing the hook or otherwise lowering the
bar -- secteam never seems to have free time to review patches.)
Reported by: Lachlan McIlroy <Lachlan.McIlroy AT isilon.com>
Reviewed by: delphij
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14380
These are a convenience for bhyve's debug server to use a single
ioctl for 'g' and 'G' rather than a loop of individual get/set
ioctl requests.
Reviewed by: grehan
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D14074
Make vm_wait() take the vm_object argument which specifies the domain
set to wait for the min condition pass. If there is no object
associated with the wait, use curthread' policy domainset. The
mechanics of the wait in vm_wait() and vm_wait_domain() is supplied by
the new helper vm_wait_doms(), which directly takes the bitmask of the
domains to wait for passing min condition.
Eliminate pagedaemon_wait(). vm_domain_clear() handles the same
operations.
Eliminate VM_WAIT and VM_WAITPFAULT macros, the direct functions calls
are enough.
Eliminate several control state variables from vm_domain, unneeded
after the vm_wait() conversion.
Scetched and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D14384
Many licenses on Linuxolator files contained small variations from the
standard FreeBSD license text. To avoid license proliferation switch to
the standard 2-clause FreeBSD license for those files where I have
permission from each of the listed copyright holders. Additional files
waiting on permission from others are listed in review D14210.
Approved by: kan, marcel, sos, rdivacky
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Small global symbols confuse ddb which matches them against small
unrelated displacements and makes the disassembly ugly.
Reported by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
IVRS can have entry of type legacy and non-legacy present at same time for same AMD-Vi device. ivhd driver will ignore legacy if new IVHD type is present as specified in AMD-Vi specification. Earlier both of IVHD entries used and two ivhd devices were created.
Add support for new IVHD type 0x11 and 0x40 in ACPI. Create new struct of type acpi_ivrs_hardware_new for these new type of IVHDs. Legacy type 0x10 will continue to use acpi_ivrs_hardware.
Reviewed by: avg
Approved by: grehan
Differential Revision:https://reviews.freebsd.org/D13160
The idea is, the pmap_qenter() API is now defined to not produce executable
mappings. If you need executable mappings, use another API.
Add pg_nx flag in pmap_qenter on x86 to make kernel pages non-executable.
Other architectures that support execute-specific permissons on page table
entries should subsequently be updated to match.
Submitted by: Darrick Lew <darrick.freebsd AT gmail.com>
Reviewed by: markj
Discussed with: alc, jhb, kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14062
compilation under FreeBSD. The mthca driver was temporarily removed as
part of the Linux 4.9 RoCE/infinband upgrade.
Top commit in Linux source tree:
69973b830859bc6529a7a0468ba0d80ee5117826
Sponsored by: Mellanox Technologies
significant source of cache line contention from vm_page_alloc(). Use
accessors and vm_page_unwire_noq() so that the mechanism can be easily
changed in the future.
Reviewed by: markj
Discussed with: kib, glebius
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14273
makes them consistent with the way other page-table pages are allocated.
It also provides the rest of the VM system a good clue that these pages
are used.
Reviewed by: alc, kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14269
mappings for the pages used for the kernel and some initial allocations
used for the page table. It maps the kernel and the blocks used for
these initial allocations using 2MB pages.
However, if the kernel does not end on a 2MB boundary, it still maps the
last portion using a 2MB page, but reports that the unused 4K blocks
within this 2MB allocation are free physical blocks. This means that
these same physical blocks could also be mapped elsewhere - for example,
into a user process. Given the proximity to the kernel text and data
area, it seems wise to avoid allowing someone to write data to physical
blocks also mapped into these virtual addresses.
(Note that this isn't a security vulnerability: the direct map makes
most/all memory on the system mapped into kernel space. And, nothing
in the kernel should be trying to access these pages, as the virtual
addresses are unused. It simply seems wise to avoid reusing these
physical blocks while they are mapped to virtual addresses so close
to the kernel text and data area.)
Consequently, let's reserve the physical blocks covered by the
page-table mappings for these initial allocations.
Reviewed by: kib, markj
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14268
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
A version of each of the MD files by necessity exists for each CPU
architecture supported by the Linuxolator. Clean these up so that new
architectures do not inherit whitespace issues.
Clean up shared Linuxolator files while here.
Sponsored by: Turing Robotic Industries Inc.
Branch Predictors) mitigation.
DOcument 336996-001 promises that CPUs which implement IBRS but not
STIBP silently ignore setting of the bit instead of trapping.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It is coded according to the Intel document 336996-001, reading of the
patches posted on lkml, and some additional consultations with Intel.
For existing processors, you need a microcode update which adds IBRS
CPU features, and to manually enable it by setting the tunable/sysctl
hw.ibrs_disable to 0. Current status can be checked in sysctl
hw.ibrs_active. The mitigation might be inactive if the CPU feature
is not patched in, or if CPU reports that IBRS use is not required, by
IA32_ARCH_CAP_IBRS_ALL bit.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14029
The virtual interrupt method uses V_IRQ, V_INTR_PRIO, and V_INTR_VECTOR
fields of VMCB to inject a virtual interrupt into a guest VM. This
method has many advantages over the direct event injection as it
offloads all decisions of whether and when the interrupt can be
delivered to the guest. But with a purely software emulated vAPIC the
advantage is also a problem. The problem is that the hypervisor does
not have any precise control over when the interrupt is actually
delivered to the guest (or a notification about that). Because of that
the hypervisor cannot update the interrupt vector in IRR and ISR in the
same way as real hardware would. The hypervisor becomes aware that the
interrupt is being serviced only upon the first VMEXIT after the
interrupt is delivered. This creates a window between the actual
interrupt delivery and the update of IRR and ISR. That means that IRR
and ISR might not be correctly set up to the point of the
end-of-interrupt signal.
The described deviation has been observed to cause an interrupt loss in
the following scenario. vCPU0 posts an inter-processor interrupt to
vCPU1. The interrupt is injected as a virtual interrupt by the
hypervisor. The interrupt is delivered to a guest and an interrupt
handler is invoked. The handler performs a requested action and
acknowledges the request by modifying a global variable. So far, there
is no VMEXIT and the hypervisor is unaware of the events. Then, vCPU0
notices the acknowledgment and sends another IPI with the same vector.
The IPI gets collapsed into the previous IPI in the IRR of vCPU1. Only
after that a VMEXIT of vCPU1 occurs. At that time the vector is cleared
in the IRR and is set in the ISR. vCPU1 has vAPIC state as if the
second IPI has never been sent.
The scenario is impossible on the real hardware because IRR and ISR are
updated just before the interrupt handler gets started.
I saw several possibilities of fixing the problem. One is to intercept
the virtual interrupt delivery to update IRR and ISR at the right
moment. The other is to deliver the LAPIC interrupts using the event
injection, same as legacy interrupts. I opted to use the latter
approach for several reasons. It's equivalent to what VMM/Intel does
(in !VMX case). It appears to be what VirtualBox and KVM do. The code
is already there (to support legacy interrupts).
Another possibility was to use a special intermediate state for a vector
after it is injected using a virtual interrupt and before it is known
whether it was accepted or is still pending.
That approach was implemented in https://reviews.freebsd.org/D13828
That method is more complex and does not have any clear advantage.
Please see sections 15.20 and 15.21.4 of "AMD64 Architecture
Programmer's Manual Volume 2: System Programming" (publication 24593,
revision 3.29) for comparison between event injection and virtual
interrupt injection.
PR: 215972
Reported by: ajschot@hotmail.com, grehan
Tested by: anish, grehan, Nils Beyer <nbe@renzel.net>
Reviewed by: anish, grehan
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13780
This avoids a nested page fault when obtaining a stack trace in DDB if
the address from the first frame does not resolve to a known symbol.
MFC after: 1 week
Sponsored by: Chelsio Communications
Use PCID to avoid complete TLB shootdown when switching between user
and kernel mode with PTI enabled.
I use the model close to what I read about KAISER, user-mode PCID has
1:1 correspondence to the kernel-mode PCID, by setting bit 11 in PCID.
Full kernel-mode TLB shootdown is performed on context switches, since
KVA TLB invalidation only works in the current pmap. User-mode part of
TLB is flushed on the pmap activations as well.
Similarly, IPI TLB shootdowns must handle both kernel and user address
spaces for each address. Note that machines which implement PCID but
do not have INVPCID instructions, cause the usual complications in the
IPI handlers, due to the need to switch to the target PCID temporary.
This is racy, but because for PCID/no-INVPCID we disable the
interrupts in pmap_activate_sw(), IPI handler cannot see inconsistent
state of CPU PCID vs PCPU pmap/kcr3/ucr3 pointers.
On the other hand, on kernel/user switches, CR3_PCID_SAVE bit is set
and we do not clear TLB.
I can imagine alternative use of PCID, where there is only one PCID
allocated for the kernel pmap. Then, there is no need to shootdown
kernel TLB entries on context switch. But copyout(3) would need to
either use method similar to proc_rwmem() to access the userspace
data, or (in reverse) provide a temporal mapping for the kernel buffer
into user mode PCID and use trampoline for copy.
Reviewed by: markj (previous version)
Tested by: pho
Discussed with: alc (some aspects)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D13985
These files previously had a 3-clause license and 'THE REGENTS' text.
Switch to standard 2-clause text with kib's approval, and add the SPDX
tag.
Approved by: kib
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
still active.
Map userspace portion of VA in the PTI kernel-mode page table as
non-executable. This way, if we ever miss reloading ucr3 into %cr3 on
the return to usermode, the process traps instead of executing in
potentially vulnerable setup. Catch the condition of such trap and
verify user-mode %cr3, which is saved by page fault handler.
I peek this trick in some article about Linux implementation.
Reviewed by: alc, markj (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
DIfferential revision: https://reviews.freebsd.org/D13956
kernel by PHYS_TO_DMAP() as previously present on amd64, arm64, riscv, and
powerpc64. This introduces a new MI macro (PMAP_HAS_DMAP) that can be
evaluated at runtime to determine if the architecture has a direct map;
if it does not (or does) unconditionally and PMAP_HAS_DMAP is either 0 or
1, the compiler can remove the conditional logic.
As part of this, implement PHYS_TO_DMAP() on sparc64 and mips64, which had
similar things but spelled differently. 32-bit MIPS has a partial direct-map
that maps poorly to this concept and is unchanged.
Reviewed by: kib
Suggestions from: marius, alc, kib
Runtime tested on: amd64, powerpc64, powerpc, mips64
Kernel Page Table Isolation (KPTI) was introduced in r328083 as a
mitigation for the 'Meltdown' vulnerability. AMD CPUs are not affected,
per https://www.amd.com/en/corporate/speculative-execution:
We believe AMD processors are not susceptible due to our use of
privilege level protections within paging architecture and no
mitigation is required.
Thus default KPTI to off for AMD CPUs, and to on for others. This may
be refined later as we obtain more specific information on the sets of
CPUs that are and are not affected.
Submitted by: Mitchell Horne
Reviewed by: cem
Relnotes: Yes
Security: CVE-2017-5754
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13971
Similar to NMIs, machine check exceptions can fire at any time and are
not masked by IF. This means that machine checks can fire when the
kstack is too deep to hold a trap frame, or at critical sections in
trap handlers when a user %gs is used with a kernel %cs. Use the same
strategy used for NMIs of using a dedicated per-CPU stack configured
in IST 3. Store the CPU's pcpu pointer at the stop of the stack so
that the machine check handler can reliably find the proper value for
%gs (also borrowed from NMIs).
This should also fix a similar issue with PTI with a MC# occurring
while the CPU is executing on the trampoline stack.
While here, bypass trap() entirely and just call mca_intr(). This
avoids a bogus call to kdb_reenter() (there's no reason to try to
reenter kdb if a MC# is raised).
Reviewed by: kib
Tested by: avg (on AMD without PTI)
Differential Revision: https://reviews.freebsd.org/D13962
In the !PTI case the NMI handler jumped past the instructions that set
%rdi to point to the current PCB, but the target instructions assumed %rdi
were set.
Reviewed by: kib
Tested by: pho
Apparently machinde/cpu.h is supposed to contain MD implementations of
MI interfaces. Also, remove kernphys declaration from machdep.c,
since it is already provided by md_var.h.
Requested and reviewed by: bde
MFC after: 13 days
