- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.
Submitted by: JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from: KAME
date: 2004/09/26 02:01:27; author: sam; state: Exp; lines: +0 -5
Correct handling of SADB_UPDATE and SADB_ADD requests. key_align may
split the mbuf due to use of m_pulldown. Discarding the result because
of this does not make sense as no subsequent code depends on the entire
msg being linearized (only the individual pieces). It's likely
something else is wrong here but for now this appears to get things back
to a working state.
Submitted by: Roselyn Lee
This change was also made in the KAME CVS repository as key.c:1.337 by
itojun.
number generator, which was re-seeded via a timeout. Now centralized
randomness/entropy is used, we can garbage collect the timeout and
re-seeding code (which was largely a no-op).
Discussed with: itojun, suz, JINMEI Tatuya < jinmei at isl dot rdc dot toshiba dot co dot jp >
diffs against #ifdef'd version of IPSEC, use "struct thread *p"
rather than "struct proc *p", fix some white space, and make some
already inconsistent white space inconsiste differently.
- sowakeup() now asserts the socket buffer lock on entry. Move
the call to KNOTE higher in sowakeup() so that it is made with
the socket buffer lock held for consistency with other calls.
Release the socket buffer lock prior to calling into pgsigio(),
so_upcall(), or aio_swake(). Locking for this event management
will need revisiting in the future, but this model avoids lock
order reversals when upcalls into other subsystems result in
socket/socket buffer operations. Assert that the socket buffer
lock is not held at the end of the function.
- Wrapper macros for sowakeup(), sorwakeup() and sowwakeup(), now
have _locked versions which assert the socket buffer lock on
entry. If a wakeup is required by sb_notify(), invoke
sowakeup(); otherwise, unconditionally release the socket buffer
lock. This results in the socket buffer lock being released
whether a wakeup is required or not.
- Break out socantsendmore() into socantsendmore_locked() that
asserts the socket buffer lock. socantsendmore()
unconditionally locks the socket buffer before calling
socantsendmore_locked(). Note that both functions return with
the socket buffer unlocked as socantsendmore_locked() calls
sowwakeup_locked() which has the same properties. Assert that
the socket buffer is unlocked on return.
- Break out socantrcvmore() into socantrcvmore_locked() that
asserts the socket buffer lock. socantrcvmore() unconditionally
locks the socket buffer before calling socantrcvmore_locked().
Note that both functions return with the socket buffer unlocked
as socantrcvmore_locked() calls sorwakeup_locked() which has
similar properties. Assert that the socket buffer is unlocked
on return.
- Break out sbrelease() into a sbrelease_locked() that asserts the
socket buffer lock. sbrelease() unconditionally locks the
socket buffer before calling sbrelease_locked().
sbrelease_locked() now invokes sbflush_locked() instead of
sbflush().
- Assert the socket buffer lock in socket buffer sanity check
functions sblastrecordchk(), sblastmbufchk().
- Assert the socket buffer lock in SBLINKRECORD().
- Break out various sbappend() functions into sbappend_locked()
(and variations on that name) that assert the socket buffer
lock. The !_locked() variations unconditionally lock the socket
buffer before calling their _locked counterparts. Internally,
make sure to call _locked() support routines, etc, if already
holding the socket buffer lock.
- Break out sbinsertoob() into sbinsertoob_locked() that asserts
the socket buffer lock. sbinsertoob() unconditionally locks the
socket buffer before calling sbinsertoob_locked().
- Break out sbflush() into sbflush_locked() that asserts the
socket buffer lock. sbflush() unconditionally locks the socket
buffer before calling sbflush_locked(). Update panic strings
for new function names.
- Break out sbdrop() into sbdrop_locked() that asserts the socket
buffer lock. sbdrop() unconditionally locks the socket buffer
before calling sbdrop_locked().
- Break out sbdroprecord() into sbdroprecord_locked() that asserts
the socket buffer lock. sbdroprecord() unconditionally locks
the socket buffer before calling sbdroprecord_locked().
- sofree() now calls socantsendmore_locked() and re-acquires the
socket buffer lock on return. It also now calls
sbrelease_locked().
- sorflush() now calls socantrcvmore_locked() and re-acquires the
socket buffer lock on return. Clean up/mess up other behavior
in sorflush() relating to the temporary stack copy of the socket
buffer used with dom_dispose by more properly initializing the
temporary copy, and selectively bzeroing/copying more carefully
to prevent WITNESS from getting confused by improperly
initialized mutexes. Annotate why that's necessary, or at
least, needed.
- soisconnected() now calls sbdrop_locked() before unlocking the
socket buffer to avoid locking overhead.
Some parts of this change were:
Submitted by: sam
Sponsored by: FreeBSD Foundation
Obtained from: BSD/OS
the MAC label referenced from 'struct socket' in the IPv4 and
IPv6-based protocols. This permits MAC labels to be checked during
network delivery operations without dereferencing inp->inp_socket
to get to so->so_label, which will eventually avoid our having to
grab the socket lock during delivery at the network layer.
This change introduces 'struct inpcb' as a labeled object to the
MAC Framework, along with the normal circus of entry points:
initialization, creation from socket, destruction, as well as a
delivery access control check.
For most policies, the inpcb label will simply be a cache of the
socket label, so a new protocol switch method is introduced,
pr_sosetlabel() to notify protocols that the socket layer label
has been updated so that the cache can be updated while holding
appropriate locks. Most protocols implement this using
pru_sosetlabel_null(), but IPv4/IPv6 protocols using inpcbs use
the the worker function in_pcbsosetlabel(), which calls into the
MAC Framework to perform a cache update.
Biba, LOMAC, and MLS implement these entry points, as do the stub
policy, and test policy.
Reviewed by: sam, bms
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.
Tested by: nork
Obtained from: KAME
of asserting that an mbuf has a packet header. Use it instead of hand-
rolled versions wherever applicable.
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
the mbuf allocator flags {M_TRYWAIT, M_DONTWAIT}.
o Fix a bpf_compat issue where malloc() was defined to just call
bpf_alloc() and pass the 'canwait' flag(s) along. It's been changed
to call bpf_alloc() but pass the corresponding M_TRYWAIT or M_DONTWAIT
flag (and only one of those two).
Submitted by: Hiten Pandya <hiten@unixdaemons.com> (hiten->commit_count++)
