the serial console speed (i386 and amd64 only). If the previous
stage boot loader requested a serial console (RB_SERIAL or RB_MULTIPLE)
then the default speed is determined from the current serial port
speed. Otherwise it is set to 9600 or the value of BOOT_COMCONSOLE_SPEED
at compile time.
This makes it possible to set the serial port speed once in
/boot.config and the setting will propagate to boot2, loader and
the kernel serial console.
user to interrupt autoboot process at all. Currently, even when
`autoboot_delay' is set to 0, loader(8) still allows autoboot process to be
interrupted by pressing any key on the console when the loader reads kernel
and modules from the disk. In some cases (i.e. untrusted environment) such
behaviour is highly indesirable and user should not be allowed to interfere
with the autoboot process at all.
Sponsored by: PBXpress Inc.
MFC after: 3 days
they would leave enough elements on the stack that if you escaped to the
loader prompt and then typed 'setenv', it would pull in all of the leaked
junk and cause an exception in the environment. There still seems to be
3 leaked elements, but they don't appear to be coming from this file.
keyboards to work if no PS/2 keyboard is attached. The position in the
menu was chosen to avoid moving option 6 (loader prompt). This should
be a no-op on non-i386/amd64 machines.
after loading such a kernel, "module_path" will be set to
an insane value. Fixed example by providing an equivalent
setting. For the record, when automatically loading a
kernel (commands "boot" and "boot-conf"), the following is
tried, in this order:
path=/boot/${kernel} file=${bootfile}
path=/boot/${kernel} file=${kernel}
path=${kernel} file=${bootfile}
path=${kernel} file=${kernel}
path=${module_path} file=${kernel}
will prepend the current kernel booting... This prevents a problem of
loading /boot/kernel's modules when a different kernel has no modules,
but you left your module_load="YES" in loader.conf...
Reviewed by: dcs (minus the help part)
bootp -> BOOTP
bootp.nfsroot -> BOOTP_NFSROOT
bootp.nfsv3 -> BOOTP_NFSV3
bootp.compat -> BOOTP_COMPAT
bootp.wired_to -> BOOTP_WIRED_TO
- i.e. back out the previous commit. It's already possible to
pxeboot(8) with a GENERIC kernel.
Pointed out by: dwmalone
BOOTP -> bootp
BOOTP_NFSROOT -> bootp.nfsroot
BOOTP_NFSV3 -> bootp.nfsv3
BOOTP_COMPAT -> bootp.compat
BOOTP_WIRED_TO -> bootp.wired_to
This lets you PXE boot with a GENERIC kernel by putting this sort of thing
in loader.conf:
bootp="YES"
bootp.nfsroot="YES"
bootp.nfsv3="YES"
bootp.wired_to="bge1"
or even setting the variables manually from the OK prompt.
pf/pflog/pfsync as modules. Do not list them in NOTES or modules/Makefile
(i.e. do not connect it to any (automatic) builds - yet).
Approved by: bms(mentor)
