Commit Graph

31 Commits

Author SHA1 Message Date
Justin T. Gibbs
41c47eee15 Simplify my copyright license terms.
aic7xxx.c:
	Add a function for sucking firmware out of the controller
	prior to reset.

	Remove some inline bloat from functions that should not have
	been inlined.

	During initialization, wait 1ms after the chip reset before
	touching any registers.  You can get machine checks on certain
	architectures (Atari I think?) without the delay.

	Return CAM_REQ_CMP for external BDR requests instead
	of CAM_BDR_SENT.

	Bump some messages to bootverbose levels above 1.

	Don't clear any negotiated sync rate if the target rejects
	a WDTR message.  The sync rate is only cleared if the target
	accepts a WDTR message.

	Fix a small bug in the mesgin handling code that could cause
	us to believe that we had recieved a message that was actually
	received by another target.  This could only confuse us in
	some very rare transmission negotiation scenarios.

	Remove some unecessary cleanup of residual information after
	a residual is reported.  The sequencer does this when the
	command is queued now.
1999-12-06 18:23:31 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Justin T. Gibbs
95a5efc2c3 Fix a few compiler nits.
Submitted by:	Bill Fumerola <billf@jade.chc-chimes.com>
1999-08-16 22:42:33 +00:00
Justin T. Gibbs
00fa2b1fa7 Complete conversion to bus dma. This driver now works on the alpha.
aicasm_symbol.c:
	Correct an unaligned access problem.  You can't rely on DB to
	store your data in an aligned fashion.
1999-04-23 23:27:31 +00:00
Justin T. Gibbs
e287abc83c Use TCL_CHANNEL/SCSI_ID/etc. macros in more locations.
Don't mess with the IRQMS bit in the host control register unless
we are an aic7770 chip.

Use calling context to determine if the card is already paused when
we update the target message request bit field in controller scratch
ram.  Looking at the paused bit in the HCNTRL register opened up a
race condition.

Insert delays in the target message request update routine as a temporary
work around for what looks like a chip bug.  I'm still investigating this
one.

Fix the Abort/Abort Tag/BDR handler to pull its message from the message
buffer in our softc instead of attempting to get it from a register on
the controller.  The message is never recorded by the controller in the
new message scheme.

Don't rely on having an SCB when a BDR occurs.  We can issue these during
invalid reconnects to.

Fix a few cases where we were restarting the sequencer but then still
falling out of a switch statement to unpause the sequencer again.
This could cause us to mess up sequencer state if it generated another
pausing interrupt between the time of the restart and unpause.

Kill the 'transceiver settle' loop during card initialization.  I
failed to realize that a controller that is not connected to any
cables will never settle or enable the SCSI transceivers at all.
The correct solution is to monitor the IOERR interrupt which indicates
that the transceiver state has changed (UW<->LVD).

Modify the aic7xxx assembler to properly echo input when stdin is not
a tty.
1999-03-23 07:24:29 +00:00
Peter Wemm
6b3daecd80 "fix" long standing aicasm build glitch. The problem was the
reorganization in rev 1.16 of i386/include/types.h which changed
stdlib.h's use of <machine/types.h>.  The problem was the -I. was causing
machine/types.h to come from the current kernel source, while stdlib.h was
coming from /usr/include.  /usr/include/stdlib.h is as old as the last
'make world', the machine/types.h was as new as the current source.
1999-01-17 19:56:02 +00:00
Justin T. Gibbs
4dd5dcaecd Revamp the way that exceptional message handling is performed so that it
is more robust and common code can be used for both the target and iniator
roles.  The mechanism for tracking negotiation state has also been simplified.

Add support for sync/wide negotiation in target mode and fix many of
the target mode bugs running at higher speeds uncovered.  Make a first
stab at getting all of the bus skew delays correct.  Sync+Wide dataout
transfers still cause problems, but this may be an initiator problem.

Ensure that we exit BITBUCKET mode if the controller is restarted.

Add support for target mode only firmware downloads.  This has been
tested on the aic7880, but should mean that we can perform target mode
on any aic7xxx controller.  Mixed mode (initiator and target roles in
the same firmware load) is currently only supported on the aic7890, but
with optimization, may fit on chips with less instruction space.
1998-12-10 04:14:50 +00:00
Justin T. Gibbs
3bafc9d432 Massive overhaul of the aic7xxx driver:
- Convert to CAM
 - Use a new DMA based queuing and paging scheme
 - Add preliminary target mode support
 - Add support for the aic789X chips
 - Take advantage of external SRAM on more controllers.
 - Numerous bug fixes and performance improvements.
1998-09-15 07:24:17 +00:00
Justin T. Gibbs
37507c1bd2 Add support to aicasm for "downloaded constants". These are immediate
operands that are set during seqeuncer program download instead of at
assembly time.

Convert the sequencer code to use" downloaded constants" for four run time
constants that vary depending on the board type.  This frees up 4 bytes
of sequencer scratch ram space where these constants used to be stored and
also removes the additional instructions required to load their values
into the accumulator prior to using them.

Remove the REJBYTE sram variable.  The host driver can just as easly
read the accumulator to get this value.

The scratch ram savings is important as the old code used to clober the
SCSICONF register on 274X cards which sits near the top of scratch ram
space.  The SCSICONF register controls bus termination, and clobbering
it is not a good thing.  Now we have 4 bytes to spare.

This should fix the reported problems with cards that don't have devices
attached to them failing with a stream of "Somone reset bus X" messages.

Doug Ledford determined the cause of the problem, fixes by me.
1997-09-27 19:37:31 +00:00
Justin T. Gibbs
c66dbc92d4 Make the aic7xxx sequencer assembler compile in the kernel's object
directory.  Rename (via repository copy) some files so that the potential
for future conflicts is minimized.

PR: conf/4363
1997-09-03 03:44:58 +00:00
Justin T. Gibbs
f68f348b20 Modify my copyright notice to allow the sequencer to be used with GPLed
software (aka Linux).

Fix a few bugs in the sequencer assembler.

Make it easy to compiler the assembler with debugging turned on.
1997-06-27 19:38:56 +00:00
Justin T. Gibbs
9ff0e63881 aic7xxx.seq:
Be consistant about testing for parity errors after waiting for a
	REQ on the bus.

	Don't ack the last byte in a transaction until after we've cleared
	all target state.

aic7xxx_asm.c:
	Test the return value of getopt against -1 not EOF. (Yet another
	shameless victum of the style guide being wrong).
1997-04-10 19:13:07 +00:00
Justin T. Gibbs
cbc7db3bf7 CFLAGS += -I. so that building in an obj directory works. 1997-04-03 05:56:00 +00:00
Justin T. Gibbs
1c147cc352 aic7xxx.seq:
Stick 4 more, twin channel only, instructions behind
	.if ( TWIN_CHANNEL)

aic7xxx_asm.c:
	Add the -O options which allows the specification of which options
	to include in a program listing.  This makes it possible to easily
	determine the address of any instruction in the program across
	different hardware/option configurations.  Updated usage() as well.
1997-03-18 19:18:39 +00:00
Bruce Evans
60b161a92a Don't depend on <sys/types.h> being (bogusly) included by <stdio.h>. 1997-03-16 17:31:59 +00:00
Justin T. Gibbs
65c303b1b1 Missed one. 1997-03-16 07:28:30 +00:00
Justin T. Gibbs
c5cb388883 Makefile gram.y scan.l sequencer.h symbol.c symbol.h aic7xxx_asm.c:
New sequencer assembler for the aic7xxx adapters.  This assembler
	performs some amount of register type checking, allows bit
	manipulation of symbolic constants, and generates "patch tables"
	for conditionalized downloading of portions of the program.
	This makes it easier to take full advantage of the different
	features of the aic7xxx cards without imposing run time penalies
	or being bound to the small memory footprints of the low end
	cards for features like target mode.

aic7xxx.reg:
	New, assembler parsed, register definitions fo the aic7xxx cards.
	This was done primarily in anticipation of 7810 support which
	will have a different register layout, but should be able to use
	the same assembler.  The kernel aic7xxx driver consumes a generated
	file in the compile directory to get the definitions of the register
	locations.

aic7xxx.seq:
	Convert to the slighly different syntax of the new assembler.

	Conditionalize SCB_PAGING, ultra, and twin features which shaves
	quite a bit of space once the program is downloaded.

	Add code to leave the selection hardware enabled during reconnects
	that win bus arbitration.  This ensures that we will rearbitrate
	as soon as the bus goes free instead of delaying for a bit.

	When we expect the bus to go free, perform all of the cleanup
	associated with that event "up front" and enter a loop awaiting
	bus free.  If we see a REQ first, complain, but attempt to
	continue.  This will hopefully address, or at least help diagnose,
	the "target didn't send identify" messages that have been reported.

Spelling corrections obtained from NetBSD.
1997-03-16 07:08:19 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Justin T. Gibbs
c2c5fd345d aic7xxx.seq:
Fix support for the aic7850 by looking only at the relavent bits of the
    QINCNT.  The 7850 puts random garbage in the high bits and all my attempts
    to determine the cause of this failed.  This approach does seem to work
    around the problem.

    Don't trust SCSIPERR to tell us when there is a parity error.  On
    some revs of the 7870 and the 7880, this bit follows the parity of
    the current byte.  Instead of using a SEQINT to tell the kernel,
    re-enable the standard parity error interrupt since it seems to pause
    the sequencer right at the time of the error which is the effect we were
    looking for anyway.

aic7xxx_reg.h:
    Remove PARITY_ERROR seqeuncer interrupt type, its no longer used.

    Define QCOUNTMASK as the SRAM location for the mask to use on the
    QINCNT register.  QCOUNTMASK is determined by the number of SCBs
    supported by the device we're working on.

aic7xxx_asm.c
    Properly check the return value of fopen, and define the arg list
    in getopt correctly.
    Submitted by: Pete Bentley <pete@demon.net>
1996-03-31 03:02:37 +00:00
Justin T. Gibbs
67e73a53fc Null terminate execl's argument list.
Submitted by: Ron Lenk <rlenk@widget.xmission.com>
1996-01-05 01:48:07 +00:00
Justin T. Gibbs
adf516474d The long awaited stability patch set for the aic7xxx driver:
1) Use cpp to preprocess the sequencer code.

2) Convert all "magic numbers" to #defines shared by the sequencer and
   kernel driver via the aic7xxx_reg.h file.  (The assembler still needs
   to be re-written in lex/yacc to allow ~|& type constructions).

3) Raise ATN on parity errors for "in" phases and send an initiator detected
   error or message-in parity error message as appropriate.

4) Turn off the reselection hardware from the time or a (re)connection to
   busfree.  It seems that some fast targets were able to reconnect before
   the sequencer was able to see busfree.

5) The message buffer is considered "in-use" when there is a positive length
   count.  The ACTIVE_MSG flag was unnecesary.

6) Properly set SCB_NEXT_WAITING to SCB_LIST_HEAD in scbs being added to
   the waiting scb list.  This is a change in how the list code works to
   facilitate some planned work in the reset code.

7) The fields in the SCB have be re-arranged to be quad-word aligned.

8) The inb code has been rewritten to catch phasemisses and be more efficient.

9) Go back to "snooping the bus" to determine if the incomming identify
   message will be followed by a simple queue message.  Its much faster than
   doing a search through the SCBs.

10) Implement better tag range checking for incomming tags.

11) Make sdtr_to_rate more accurate (use 25 instead of 24 in calculations -
    must have been asleep that night).

12) Rearrange some routines to reduce code complexity and size.

13) Update comments and formatting.

14) Fixed bugs I've forgotten about??

Reviewed by: David Greenman <davidg@FreeBSD.org>
1996-01-03 06:25:32 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Justin T. Gibbs
3cddb2a3e2 John Aycock's BSD copyrighted sequencer assembler and sequencer code. This
is identical to the older version, just the copyright has changed.  Many
thanks go to Dean Gehnert of the Linux camp who went the extra mile to make
this happen.

Other changes:

Update assembler man page to include the -v and -D options

Merge in Dean's latest changes to the assembler

Have the sequencer do a MSG_REJECT when the negotiated syncronous rate
is lower than the adapter supports.  This forces asyncronous mode which
is faster at these rates anyway.

This code will be moved shortly to the non-gpld portion of the tree.
1995-04-15 21:45:56 +00:00
Justin T. Gibbs
5743c01c3f Major overhaul of the aic7xxx driver:
- Report valid residual byte counts.  We actually pause the sequencer
	  when the residual is non-zero.  I thought about using DMA to do this,
	  bus sequencer program space is tight.

	- Fix embarassing off by one error in the computation of a 2's
	  compliment variable.  This was most likely the cause of the
	  many problems reported with the tagged queuing code.

	- Handle "MAX_SYNC" as a special case (ie we are the ones starting
	  the sync negotiation sequence).  This was done so that the target
	  scratch area can be initialed to 0 offset (asyncronous transfers)
	  safely.  The initialization to 0 (was 15) is necessary since in
	  some cases a Wide negotiation could run into problems if SCSIRATE
	  was set wrong and we went into data(in/out).

	- Trim the DMA routines a little by using some procedures.  Net
	  effect is more functionality with 3 less instructions after this
	  update.

	- Toggle the WIDEODD bit of the DFCNTRL whenever this is not the
	  last SG block.  It has no effect in the 8bit bus configuration,
	  but in the Wide configuration ensures that the overlap byte is
	  held in the SCSI block if the transfer is odd so it will end
	  up in the next SG (the correct behavior).
1995-03-31 14:06:02 +00:00
Justin T. Gibbs
b8d72a5ae8 Make the aic7xxx assembler take quoted strings as a single token.
Make $Id the version variable which required the quoted string "feature".
1995-03-17 23:54:17 +00:00
Justin T. Gibbs
c135d93bbf aic7xxx.c:
Print out the length of the compiled sequencer program.

aic7xxx.seq:
	More optimizations.  Replace generic bcopy routine with bcopy_3
and bcopy_4 (ie unroll the loops) since these are the only two cases used.
Initialize SIMODE1 and SXFRCTL1 from the kernel in ahc_init instead of
at each selection/reselection since this is expensive and only needs to
be done once.  Condense function returns into previous instruction if possible.
Reorder some sections to kill superflous jumps.  These optimizations kill
the ~150k/s penalty adding support for Twin/Wide cards was costing since
the last place in the commaon path of execution where we had to do ugly,
convoluted testing for the type of card in the sequencer has gone away.
Next stop tagged queuing and target mode.
1995-01-22 00:46:53 +00:00
Justin T. Gibbs
0d56403998 At $Ids to all files. Have the sequencer use DMA to tranfer its SCB
(SCSI control block) instead of having the host PIO it down.  Also
reimplement WDTR and SDTR optimization to remove code in the sequencer
and place the responsibility of knowing when to initiate SDTR or WDTR
on the kernel driver.  This vastly shortens the sequencer program yet
yeilds the same performance.
1995-01-16 16:31:21 +00:00
Justin T. Gibbs
8d244f9e3b Previous changes to the sequencer compiler backed out. We go back to
generating the .h file, and a pregenerated file is included.
1994-11-18 09:11:35 +00:00
Jordan K. Hubbard
9cc6cb724f Make the compiler spit out a .c file instead of a .h file. 1994-11-18 08:17:20 +00:00
Justin T. Gibbs
0ef8c3017a John Aycock's aic7770 sequencer code and assembler. There is currently
a discussion going on about removing this code from the burden of the
GPL, but it won't happen before Beta, and this code should be tested
before release.

Supports 27/2842 class adaptec cards and is almost capable of supporting
aic7870 based adapters (294X series cards).  It does not support Wide
controllers or the second channel on Twin boards although I have work in
progress on getting both channels and running.

I have also added a few performance improvements to this version that give
us approximately a 25% boost over the original driver.  These patches have
been submitted to the author.

Obtained from: Linux aic7770 driver (John Aycock - aycock@cpsc.ucalgary.ca)
1994-11-17 20:19:10 +00:00