Commit Graph

41 Commits

Author SHA1 Message Date
Doug Rabson
6874d62958 Remove the vga-pci driver. It serves no purpose and it hides the hardware
from useful drivers such as the 3D DRI drivers I will be porting for
hardware accelerated OpenGL. The hardware will still be reported during
boot using the nomatch system.

Approved by: jkh
2000-02-19 09:44:06 +00:00
Peter Wemm
4a1e4cb727 Clean up the cfgmech/pci_mechanism debris. The reason for the existance
of this is no longer an issue as we have a replacement driver for the
one that needed it.

Reviewed by:	dfr
2000-01-08 08:31:24 +00:00
Peter Wemm
bcae942098 Zap pci_map_dense() and pci_map_bwx() - they were for compatability but
are not used.  All the drivers that use memory mapped IO on the Alpha have
been ported already.
2000-01-05 16:40:10 +00:00
Peter Wemm
dfea8af9f4 Make the usb and ide/ata device identification a little saner. Rather than
attaching to the device via chip*, use the newbus nomatch method to report
the device.  This leaves them unattached so that a driver can be easily
loaded to grab them later.
1999-12-10 17:44:22 +00:00
Kenneth D. Merry
64ae346b52 [ repository copy of sys/pci/pci_ioctl.h to sys/sys/pciio.h happened in the
background ]

Rename sys/pci/pci_ioctl.h to sys/sys/pciio.h to make it easier for
userland programs to use this interface.  Reformat the file, and add a
BSD-style copyright to it.

Add a new man page for pci(4).  The PCIOCGETCONF, PCIOCREAD, and PCIOCWRITE
ioctls are documented, but the PCIOCATTACHED ioctl is not documented
because it is not implemented.

Change includes of <pci/pci_ioctl.h> to <sys/pciio.h> or remove them
altogether.  In many cases, pci_ioctl.h was unused.

Reviewed by:	steve
1999-12-08 17:44:04 +00:00
Doug Rabson
45f0aa1f0e * Implement bus_set/get/delete_resource for pci.
* Change the hack used on the alpha for mapping devices into DENSE or
  BWX memory spaces to a simpler one. Its still a hack and should be
  a seperate api to explicitly map the resource.
* Add $FreeBSD$ as necessary.
1999-10-14 21:38:33 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Roger Hardiman
153eb46fb6 On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus
via an IBM PCI-PCI bridge (82351 or 82352 or 82353)

The driver must identify if it is on a secondary PCI bus, which is
created via the IBM PCI-PCI bridge. If it is, then it must initialise
the IBM PCI-PCI bridge correctly.

To do this, the following new functions are added.
Because they use the pcici_t tag, they are considered 2.2 compatibility APIs
  pcici_t * pci_get_parent_from_tag(pcici_t tag);
  int       pci_get_bus_from_tag(pcici_t tag);

(The _from_tag suffix is used to prevent clashes with similarly named
 newbus PCI API functions)

Submitted by: Anton Berezin <tobez@plab.ku.dk>
Reviewed by:  Doug Rabson <dfr@nlsystems.com>
Reworked by:  Me (roger)
1999-05-31 22:13:37 +00:00
Andrew Gallatin
aa6de8e012 Add support for multiple PCI "hoses" used on various alpha platforms.
The specific intent of this commit is to pave the way for importing
Compaq XP1000 support.  These changes should not affect the i386 port.

Reviewed by: Doug Rabson <dfr@nlsystems.com>
(actually, he walked me through most of it & deserves more than reviewd-by
credit )
1999-05-20 15:33:33 +00:00
Peter Wemm
8dc26439da Move pcibus (host -> pci bus) probe/attach routines from nexus
to pcibus.c.  pci_cfgopen() becomes static and there are no more
bus #ifdef's in nexus.c.
1999-05-18 20:48:43 +00:00
Peter Wemm
49e5f1b929 Use the probe priority mechanism to make sure the chip* probes do not
displace a real driver.
Revert rev 1.109.
Pick up a few things from elsewhere (a couple of SiS id's).

As an *experiment*, have the chip* driver claim (for reporting purposes)
IDE controllers if there isn't another PCI-aware ide or ata driver to
grab them.  I've exported the match function since it could be used from
the ata-all.c code replacing ata_pcimatch() - but I have not touched the
ata code.  I'd like to catch a few more devices this way, including USB
and other bridges etc.
1999-05-11 07:55:32 +00:00
Peter Wemm
c09634ba71 GC unused variable in struct. 1999-05-09 20:25:01 +00:00
Peter Wemm
2850fee53f Fix a goof on my part; s/struct moduledata */struct module */ 1999-05-06 22:05:39 +00:00
Peter Wemm
46f40af052 Replace the pcidevice_set linker set based configuration mechanism for old
style pci drivers with a simple one-line change to use a module that
registers itself under new-bus and should in theory enable just about all
of the pci drivers to be loadable (kldload and loader(8)) but without
having the impact of converting the APIs yet.

This also fixes the problem of having undefined variables when only
new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
Peter Wemm
e91896117b Well folks, this is it - The second stage of the removal for build support
for LKM's..
1999-04-17 08:36:07 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Stefan Eßer
441e39d74a Fix problem with zero valued map registers followed by valid map entries.
The previous code just ignored the invalid map register, but this gave
surprising results because of the way pci_map_port() associated the map
register offset supplied with a map entry in the map array.
1999-01-19 23:29:20 +00:00
Bruce Evans
92e81ca475 Let drivers specify interrupt flags (INTR_EXCL and/or INTR_FAST)
using the new pci_map_int_right() variant of pci_map_int().  Fast
interrupts work for PCI devices if and only if they are exclusive.
(The PCI interrupt mux doesn't support fast interrupts and can't
support a mixture of fast and slow interrupts even in principle.)

Don't assume that intrmask_t == unsigned in pci_map_int().
1999-01-13 04:59:19 +00:00
Matthew Dillon
35f069d08b pci_device pd_probe function changed from returning char * to returning
const char *.  Originally I was going to add casts from const char * to
    char * in some of the pci device drivers, but the reality is that the
    pci device probes return constant quoted strings.
1998-12-14 05:47:29 +00:00
Doug Rabson
a0ab71761c Add functions for accessing dense and bwx memory for pci devices. These
routines are necessary to allow the use of certain types of hardware on
the alpha, particularly a Myrinet card.

Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-10-06 14:18:40 +00:00
Justin T. Gibbs
06915ea69a Revive PCIConf.
Submitted by:	"Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Justin T. Gibbs
188fafbc3f Use "baseclass" instead of "class" for storing the contents of PCI register
0xB so that C++ programs can use the PCI conf interface.
1998-08-13 19:12:20 +00:00
Doug Rabson
df9efa9a8b On the alpha, ports may be allocated above 64k.
Change the port address argument to pci_map_port to pci_port_t* which is
defined as u_int on the alpha, u_short on i386.  This is a stopgap with a
hopefully limited lifetime.

Discussed with: Stefan Esser <se@freebsd.org>
1998-07-22 08:39:08 +00:00
Steve Passe
d6f41fc926 Reorder function decls alphabetically. 1997-08-21 08:31:41 +00:00
Steve Passe
1fa27e1c81 A few more casts and a function declaration for warning free kernel builds. 1997-08-21 07:05:54 +00:00
Stefan Eßer
5bec615793 Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .

The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...

This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.

A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:

1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
   and are probed like any "standard" PCI device.

The following features are currently missing, but will be added back,
soon:

1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets

This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bruce Evans
b568ea4e01 Removed more devconf leftovers. 1996-09-10 23:31:13 +00:00
Poul-Henning Kamp
40f3771f7f Various cleanups for remanents of devconf. 1996-09-08 10:44:18 +00:00
Poul-Henning Kamp
bfbb029d87 Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
Bruce Evans
ede8dc43a2 Fixed unsigned longs that should have been vm_offset_t.
vm_offset_t is currently unsigned long but should probably be plain
unsigned for i386's to match the choice of minimal types to represent
for fixed-width types in Lite2.  Anyway, it shouldn't be assumed
to be unsigned long.

I only fixed the type mismatches that were detected when I changed
vm_offset_t to unsigned.  Only pointer type mismatches were detected.
1996-03-19 15:03:00 +00:00
Stefan Eßer
e653d76e96 Add support for multi-function devices. 1996-01-25 18:32:00 +00:00
Stefan Eßer
dd7610fca4 Make PCI interrupt handlers return void like everybody else does.
Reviewed by:	davidg
1996-01-23 21:48:28 +00:00
Bruce Evans
512fef80a9 Completed function declarations and/or added prototypes. 1995-11-21 12:55:26 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Bruce Evans
f0d47944e2 Forward-declare kern_devconf for use in a prototype. Some drivers
include <pci/pcivar.h> without including <sys/devconf.h> and other
drivers include <pci/pcivar.h> before including <sys/devconf.h> if
certain identifiers are defined.

The devconf headers have convoluted interdependencies.  <sys/devconf.h>
includes <machine/devconf.h> which includes <pci/pcivar.h>.  Most
drivers include <sys/devconf.h> so even isa drivers depend on
<pci/pcivar.h>.  For similar reasons, most drivers depend on another
pci header, on an isa header and on two scsi headers.
1995-03-25 21:10:38 +00:00
Stefan Eßer
8673e05a9a Completely new PCI code:
1) Supports PCI to PCI bridge devices (and tries to initialise them,
   even if the BIOS is brain dead).
2) Supports shared PCI interrupts. Interrupt handlers now MUST return
   '0' if they found nothing to do, '1' otherwise.

New features tested with i486 systems based on the Intel Saturn and
a DEC 4channel Ethernet card only, but expected to work on most systems.

The option PCI_REMAP has been removed !

Submitted by:	Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
David Greenman
cb09d35cb0 Added a new field to the pci_device struct called pd_shutdown to specify
a device specific shutdown routine for devconf. Assign the value of this
to the kern_devconf struct. Implement a device shutdown routine for if_de
that disables the device. This will stop the device from corrupting memory
after a reboot.
1995-03-17 04:27:21 +00:00
Stefan Eßer
04dbb40865 First try to add support for PCI-PCI bridge chips (written for the
DEC 21050 chip in particular, don't have specs of other such chips).

This should add support for Multiple-Ethernet PCI cards (e.g. Znyx 314).

Reviewed by:	se
Submitted by:	<wolf@kintaro.cologne.de> Wolfgang Stanglmeier
1995-02-27 17:17:14 +00:00
Stefan Eßer
5e70573817 Reviewed by: se
Submitted by:	wolf (Wolfgang Stanglmeier)
Files moved here from sys/i386/pci, since they are meant to be
architecture independent.
1995-02-01 22:56:55 +00:00