actually used it since the only device that specified it (vga0) was marked
as "FLG_INVISIBLE" in userconfig and therefore never shown.
Suggested by: bde
the user's config file. Based on an idea/suggestion from Cameron (cg).
Change LINT to build newpcm instead of the old Voxware derived stuff.
That's much more useful in the longer term.
support code). It hasn't worked since at least October 1995, and probably
has never worked in the FreeBSD 2.0+ tree. Obviously it's not a priority
to many folks.
Reviewed by: phk, sos
tested with LINT. I've put back netatm/kern_include.h and maked it
with a fixme!, otherwise NETISR_ATM isn't defined as ATM_KERNEL isn't
defined. Defining that exposes a whole bunch of other dependencies.. :-(
are using an old unconverted driver. Most (if not all) of the drivers
for common hardware are newbus these days. However, we don't want
to encourage people to take the easy way out and write new drivers
using the shims. This is just passive "encouragement".
Reviewed by: phk
overflows the default buffer making it too hard to get a dmesg from
a verbose boot. It's still changeable via an option, so if picobsd
needs to set it to something else they still can.
Reviewed by: phk, alfred
the codepath is followed.
From the PR:
vclean calls vrele leading to deadlock (if usecount > 0)
vclean() calls vrele() if v_usecount of the node was higher than one.
But before calling it, it sets the VXLOCK flag, which will make
vn_lock called from vrele dead-lock.
PR: kern/15117
Submitted by: Assar Westerlund <assar@stacken.kth.se>
Reviewed by: rwatson
Obtained from: NetBSD
conditions are met rather than having to resort to #if's in the code.
> dev/syscons/scvgarndr.c optional sc vga
> dev/syscons/scvesactl.c optional sc vga vesa
> i386/isa/vesa.c optional vga vesa
Some controllers submit bogus pointers to the Done queue.
ohci_hash_find_td fails to find these in its hash and panics. Instead of
panicing we now assume the whole done queue is lost and let the timeout
code to clean up the mess after us.
Yes it is almost code freeze, but as the result of many thought, now I
think this should be added before 4.0...
make world check, kernel build check is done.
Reviewed by: green
Obtained from: KAME project
This is fix to usr.sbin/trpt and tcp_debug.[ch]
I think of putting this after 4.0 but,,,
-There was bug that when INET6 is defined,
IPv4 socket is not traced by trpt.
-I received request from a person who distribute a program
which use tcp_debug interface and print performance statistics,
that
-leave comptibility with old program as much as possible
-use same interface with other OSes
So, I talked with itojun, and synced API with netbsd IPv6 extension.
makeworld check, kernel build check(includes GENERIC) is done.
But if there happen to any problem, please let me know and
I soon backout this change.
and Pentium III Xeon CPUs. If a CPU is one of Pentium II, Pentium II
Xeon and Celeron, the message is always "Pentium II/Pentium II
Xeon/Celeron". If a CPU is one of Pentium III and Pentium III Xeon,
the message is always "Pentium III/Pentium III Xeon".
- only allocate rusage struct when caller wants rusage info
- fix a stupid paren mismatch bug that was causing EPERM to get returned
to callers rather then ECHILD
system is slowed down and in the right spot (a race condition in fork()).
The "previous time" fields have moved from pstat to proc. Anything which
uses KVM needs to be recompiled with a new libkvm/headers.
A couple wacky u_quad_t's in struct proc are now u_int64_t (the same, but
according to lack of 'quad's in proc.h and usage in kern_resource.c).
This will have no effect on code.
This has been make-world-and-installed-new-kernel-which-works-fine-tested.
Reviewed by: bde (previous version)
condition.
- 1 line change that allows to balance chips between ncr
and sym using pci compat option (not compiled by default
in 4.0 but maintains the driver source 3.4 compatible).
Fix a few more namespace messes and whitespace curiosities in acl.h
Fix comments in acl.h
Clean up some function prototypes from acl.h that won't be committed
before the code freeze.
Some of this kindly pointed out by: the ever patient bde
#Please forget the strange log message of the previous commit .
IPv6 multicast routing.
kernel IPv6 multicast routing support.
pim6 dense mode daemon
pim6 sparse mode daemon
netstat support of IPv6 multicast routing statistics
Merging to the current and testing with other existing multicast routers
is done by Tatsuya Jinmei <jinmei@kame.net>, who writes and maintainances
the base code in KAME distribution.
Make world check and kernel build check was also successful.
Obtained from: KAME project
subr_diskmbr.c:
Don't "helpfully" enlarge our idea of the disk size to cover all the
primary slices. Instead, truncate or discard slices that don't seem
to be on the disk. The enlargement was a hack for disks that don't
report their size (e.g., MFM disks). It is just wrong in general.
wd.c:
In CHS mode, limit the disk size so that cylinder numbers >= 65536
cannot occur. This normally only affects disks larger than 33.8GB.
CHS mode accesses to addresses above the limit are now properly broken
(an error is returned instead of garbage for reads and disk corruption
for writes).
PR: 15611
Reviewed by: readers of freebsd-bugs did not respond to a request
for review
o Drop all broadcast and multicast source addresses in tcp_input.
o Enable ICMP_BANDLIM in GENERIC.
o Change default to 200/s from 100/s. This will still stop the attack, but
is conservative enough to do this close to code freeze.
This is not the optimal patch for the problem, but is likely the least
intrusive patch that can be made for this.
Obtained from: Don Lewis and Matt Dillon.
Reviewed by: freebsd-security
kernel IPv6 multicast routing support.
pim6 dense mode daemon
pim6 sparse mode daemon
netstat support of IPv6 multicast routing statistics
Merging to the current and testing with other existing multicast routers
is done by Tatsuya Jinmei <jinmei@kame.net>, who writes and maintainances
the base code in KAME distribution.
Make world check and kernel build check was also successful.
malloc region (kmem_map) to be wrong and semi-random on systems with more
than 1GB of RAM. This is not a complete fix, but is sufficient for
machines with 4GB or less of memory. A complete fix will require some
changes to the getenv stuff so that 64bit values can be passed around.
NOT FIXED: machines with more than 4GB of RAM (e.g. some large Alphas)
since we're still using ints to hold some of the values.
Reviewed by: bde
uhci_check_intr() routine needs to be more careful about deciding when
the end of a transfer has been detected.
This allows me to remove the nasty workaround code from if_aue and if_cue.
Receive performance is now much better for these adapters (500KB/sec
vs. 350KB/sec).
Also removed unused KUE_CUTOFF define from if_kuereg.h.
Submitted by: Lennart Augustsson
Reviewed by: n_hibma
with 'options DDB'). Setting this to `ddb' or `gdb' breaks into the
kernel debugger in the corresponding mode. This mechanism has proven
very useful at Whistle for setting breakpoints, etc., while doing
remote serial line kernel debugging.
Obtained from: Whistle source tree
- Fix btxldr to preserve a NULL bootinfo pointer when it copies the kernel
arguments.
- Add the cdldr bootstrap program. This program is tacked onto the
beginning of the standard 3rd stage boot loader (/boot/loader) to form
the CD boot loader (/boot/cdboot). When a CD is booted, the cdboot file
is copied into memory instead and executed. The cdldr stub emulates the
environment normally provided by boot2 and then starts the loader. This
booting method does not emulate a floppy drive, but boots directly off of
the CD. This should fix the problems some BIOS's have with emulating a
2.88 MB floppy image.
- Add support to the loader to recognize that it has been booted by cdldr
instead of boot2 and use a simpler method of extracting the BIOS boot
device.
of %cr0 wasn't reloaded into %eax before being modified to turn protected
mode off if PAGING was not defined. The result was that the processor did
not exit protected mode, so when it tried to jump to segment 0x0 in the
next instruction to clear the prefetch cache like one should when leaving
protected mode, it actually tried to jump to a null selector, causing a
GPF.
(prefix related ioctl should only be called on router,
because host use dynamic address and prefix configuration mechanism,
and those prefix are managed separately with ones whih are assined
manually.)
Using recursion to traverse the recursive data structure for extended
partitions was never good, but when slice support was implemented in
1995, the recursion worked for the default maximum number of slices
(32), and standard fdisk utilities didn't support creating more than
the default number. Even then, corrupt extended partitions could
cause endless recursion, because we attempt to check all slices, even
ones which we don't turn into devices.
The recursion has succumbed to creeping features. The stack requirements
for each level had grown to 204 bytes on i386's. Most of the growth was
caused by adding a 64-byte copy of the DOSpartition table to each frame.
The kernel stack size has shrunk to about 5K on i386's. Most of the
shrinkage was caused by the growth of `struct sigacts' by 2388 bytes
to support 128 signals.
Linux fdisk (a 1997 version at least) can now create 60 slices (4 standard
ones, 56 for logical drives within extended partitions, and it seems to
be leaving room to map the 4 BSD partitions on my test drive), and Linux
(2.2.29 and 2.3.35 at least) now reports all these slices at boot time.
The fix limits the recursion to 16 levels (4 + 16 slices) and recovers
32 bytes per level caused by gcc pessimizing for space. Switching to
a static buffer doesn't cause any problems due to recursion, since the
buffer is not passed down. Using a static buffer is wrong in general
because it requires the giant lock to protect it. However, this problem
is small compared with using a static buffer for dsname(). We sometimes
neglect to copy the result of dsname() before sleeping.
Also fixed slice names when we find more than MAX_SLICES (32) slices.
The number of the last slice found was not passed passed recursively.
The limit on the recursion now prevents finding more than 32 slices
with a standard extended partition data structure anyway.
struct contains a major union for which lph_slp was being initialized
only for TCP connections, but accessed for all types of connections
leading to a crash. Also, a conditional controlling an nfs_slplock()
call contained an improper paren grouping, causing a second crash in
the UDP case.
The nqhost structure has been reorganized and lph_slp has been made a
normal structural field rather then a union field, and properly
initialized for all connection types.
Approved by: jkh
- clean up unneeded AFS ID type
- Add Coda, NTFS, NWFS ACL types
- Add acl_dup() prototype
- Remove acl_calc_mask, which belongs in the editing library
- Introduce posix1e.3, a man page introducing POSIX.1e library calls
(more man pages to follow)
vintage system, well before the ppbus changes. When I called it an
"example" module, I meant as an example for the rest of the ppbus client
drivers, not that it was worthless. I'll mail my 5.8MB world.log to
anybody who doesn't believe me.
Wrongly accused by: obrien
adds _np to a couple of function prototypes that provided more broad/useful
interfaces than POSIX.1e interfaces included.
Also, move from using a heuristic to identify POSIX.1e-semantic ACLs to
using different ACL types for non-POSIX.1e ACLs. This should clean up the
existing fuzzy logic that determined when acl_sort() should be applied
before kernel submission.
IRQ 2 was being unilaterally disallowed, which is only appropriate if
the interrupt hardware is the traditional chained PIC arrangement.
Reviewed by: tegge (in principle)
Try to support older systems reporting irq0 for the first channels.
Support sharing of the std interrupts (says peter :) )
Dont use READ_CD on normal data reads (2048 bytes), too many old drives
doesn't support this command even if the std says "shall" :(, but still
use READ_CD on all other blocksizes.
Add the geometry to the ad probe, its still usefull.
also broke diskless swapping. Moving the swapdev_vp initialization
to more commonly run code solves the problem.
PR: kern/16165
Additional testing by: David Gilbert <dgilbert@velocet.ca>
that there's sense to send with status (if the SIM does it), and
then clear any pending contingent allegiance state for this initiator
if the SIM actually did send the sense data.
Widen MAX_INITITATORS to 256- that's still not quite right, but will
accomodate the widest Fibre Channel support in FreeBSD now.
Obtained from:(partially) gibbs@freebsd.org
does ignore DCD. Even TIOCMGET cannot read DCD as the firmware doesn't
report it. This has pretty interesting effects for ppp(8) which runs
in clocal mode and polls carrier (!). (Specialix's linux driver does
this too)
Also update the firmware to 3.0.6 for the SX cards, as apparently there
was a problem with floating (disconnected) DCD pins causing stray carrier
transitions, especially at port open time.
It seems to work here, and carrier loss is detected nearly immediately
rather than having to wait for a LQR timeout (a few minutes) before ppp(8)
gives up.
DCD problem noted by: nsayer
despite having a non-null cn_tab entry. This case now works the same
as if there is no physical console, except i/o at the kernel printf
level may still work. This frees drivers of physical console drivers
from the responsibility of attaching the device no matter what.
for IPv4 communication.(IPv4 mapped IPv6 addr.)
Also removed IPv6 hoplimit initialization because it is alway done at
tcp_output.
Confirmed by: Bernd Walter <ticso@cicely5.cicely.de>
Dont be so verbose in the probe, only ONE line printed now, to get more
info boot verbose. Centralise most printf's in ata-all & ata-dma to use
the ata_printf function, it saves alot of codelines.
Repeat the identify command if drive fails the first.
Protect the timeout functions with splbio.
Dont update the transfer details before we are sure the transfer
succeded, this way they are proberly retried on errors.
Move the handling of next_writeable to userland.
Use the READ_CD command to read CD's. That enables us to read _anything_
via the normal read/write interface. This kindof obsoletes the READAUDIO
ioctl, but we keep that for now.
include this in all kernels. Declare some const *intrq_present
variables that can be checked by a module prior to using *intrq
to queue data.
Make the if_tun module capable of processing atm, ip, ip6, ipx,
natm and netatalk packets when TUNSIFHEAD is ioctl()d on.
Review not required by: freebsd-hackers
same object file (atapi-cd.o) as the ata drivers. I'd have called it
wcd.[ch], but there's already one of those in the Attic that we can't
clobber - the good names are taken.
Fix building so that it can be compiled into LINT alongside ata.
Requested by: bde
Update i2c code to build on FreeBSD 3.x and 4.x machines.
Added GPIO audio values for the Askey/Dynalink TV card talken from postings on the V4L mailing list.
Update Australian Channel Set. Submitted by John Birrell <jb@cimlogic.com.au>
Add new Channel Set for France. Submitted by Daniel Dagneaux <dagneaux@lure.u-psud.fr>
doesn't conflict with the parallel port on my miata (0x3bc..0x3bf).
The right solution will be to reserve two port ranges in vga, 0x3b0..0x3ba
and 0x3c0..0x3ca.
Reviewed by: yokota
o Cut out the probed stuff. We no longer need it since newbus implicitly
checks for this (likely bt can be changed as well in this way).
o Add preliminary support for unload. Untested because aha doesn't yet
support identify and there are some interactions with PnP that I've
not yet worked out.
With this I can boot the AHA-1542CP FW F.0. All the aha resources
appear to be picked up via pnp now.
The files were repo copied from their original location and are part
way towards being portable.
This should unbreak the EISA support in the driver.
I have not updated files* yet as I'm not quite finished.
