after the LLADDR is reclaimed which causes a null pointer deref with
inherit_mac enabled. Record the ifnet pointer of the interface and then compare
that to find when to re-assign the bridge address.
Submitted by: sam
prison_check_ip4 and prison_check_ip6. As prison_if includes a jailed()
check, remove that check before calling rtm_get_jailed.
Approved by: bz (mentor)
return zero on success and an error code otherwise. The possible errors
are EADDRNOTAVAIL if an address being checked for doesn't match the
prison, and EAFNOSUPPORT if the prison doesn't have any addresses in
that address family. For most callers of these functions, use the
returned error code instead of e.g. a hard-coded EADDRNOTAVAIL or
EINVAL.
Always include a jailed() check in these functions, where a non-jailed
cred always returns success (and makes no changes). Remove the explicit
jailed() checks that preceded many of the function calls.
Approved by: bz (mentor)
we, like TCP and UDP, move the checksum calculation
into the IP routines when there is no hardware support
we call into the normal SCTP checksum routine.
The next round of SCTP updates will use
this functionality. Of course the IGB driver needs
a few updates to support the new intel controller set
that actually does SCTP csum offload too.
Reviewed by: gnn, rwatson, kmacy
a locked route. Thus we have to use RTFREE_LOCKED(9) to get it unlocked
and rtfree(9)d rather than just rtfree(9)d.
Since the PR was filed, new places with the same problem were added
with new code. Also check that the rt is valid before freeing it
either way there.
PR: kern/129793
Submitted by: Dheeraj Reddy <dheeraj@ece.gatech.edu>
MFC after: 2 weeks
Committed from: Bugathon #6
check on the sysctl argument value being RTF_LLINFO is conditioned on
the COMPAT_ROUTE_FLAGS kernel option. This mismatch caused the L2
table retrieval failure, and the arp/ndp -an command displays empty L2
tables.
Reviewed by: pjd
by the new kernel option COMPAT_ROUTE_FLAGS for binary backward
compatibility. The RTF_LLDATA flag maps to the same value as RTF_LLINFO.
RTF_LLDATA is used by the arp and ndp utilities. The RTF_LLDATA flag is
always returned to the userland regardless whether the COMPAT_ROUTE_FLAGS
is defined.
in the loopback and synthetic loopback code so that packets are
access control checked and relabeled. Previously, the MAC
Framework enforced that packets sent over the loopback weren't
relabeled, but this will allow policies to make explicit choices
about how and whether to relabel packets on the loopback. Also,
for SIMPLEX devices, this produces more consistent behavior for
looped back packets to the local MAC address by labeling those
packets as coming from the interface.
Discussed with: csjp
Obtained from: TrustedBSD Project
read with libkvm) to the addresses of a prison, when inside a
jail. [1]
As the patch from the PR was pre-'new-arp', add checks to the
llt_dump handlers as well.
While touching RTM_GET in route_output(), consistently use
curthread credentials rather than the creds from the socket
there. [2]
PR: kern/68189
Submitted by: Mark Delany <sxcg2-fuwxj@qmda.emu.st> [1]
Discussed with: rwatson [2]
Reviewed by: rwatson
MFC after: 4 weeks
1. The "route" command allows route insertion through the interface-direct
option "-iface". During if_attach(), an sockaddr_dl{} entry is created
for the interface and is part of the interface address list. This
sockaddr_dl{} entry describes the interface in detail. The "route"
command selects this entry as the "gateway" object when the "-iface"
option is present. The "arp" and "ndp" commands also interact with the
kernel through the routing socket when adding and removing static L2
entries. The static L2 information is also provided through the
"gateway" object with an AF_LINK family type, similar to what is
provided by the "route" command. In order to differentiate between
these two types of operations, a RTF_LLDATA flag is introduced. This
flag is set by the "arp" and "ndp" commands when issuing the add and
delete commands. This flag is also set in each L2 entry returned by the
kernel. The "arp" and "ndp" command follows a convention where a RTM_GET
is issued first followed by a RTM_ADD/DELETE. This RTM_GET request fills
in the fields for a "rtm" object, which is reinjected into the kernel by
a subsequent RTM_ADD/DELETE command. The entry returend from RTM_GET
is a prefix route, so the RTF_LLDATA flag must be specified when issuing
the RTM_ADD/DELETE messages.
2. Enforce the convention that NET_RT_FLAGS with a 0 w_arg is the
specification for retrieving L2 information. Also optimized the
code logic.
Reviewed by: julian
the following operations, e.g.:
1) ifconfig tun0 create
2) ifconfig tun0 10.1.1.1 10.1.1.2
3) route add -net 192.103.54.0/24 -iface tun0
4) ifconfig tun0 destroy
If cv wait on the TUN_CLOSED flag, then the last operation (4) will
block forever.
Revert the previous changes and fix the mtx_unlock() leak.
by adding a separate TUN_CLOSED flag that is set after tunclose is done referencing it.
- drop the tun_mtx after the flag check to avoid holding it across if_detach which can recurse in to
if_tun.c
destroy operation until the referenced clone device has
been closed by the process properly. The behavior is now
consistently with the previous release.
Reviewed by: Kip Macy
Add code to the Chelsio driver so that it can recognize different
module types which may be plugged into it, including SR, LR lasers
and TWINAX copper cables.
Obtained from: Chelsio Inc.
MFC after: 1 week
unregistration, and execution:
- Add some brackets for clarity and trim a bit of vertical whitespace.
- Remove comments that may not contribute to clarity, such as "Lock"
before acquiring a lock and "Get memory" before allocating memory.
- During hook registration, don't drop pfil_list_lock between checking
for a duplicate and registering the hook, as this leaves a race
condition by failing to enforce the "no duplicate hooks" invariant.
- Don't lock the hook during registration, since it's not yet in use.
- Document assumption that hooks will be quiesced before being
unregistered.
- Don't write-lock hooks during removal because they are assumed
quiesced.
- Rename "done" label to "locked_error" to be clear that it's an error
path on the way out of hook execution.
MFC after: pretty soon
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
but formerly missed under VIMAGE_GLOBAL.
Put the extern declarations of the virtualized globals
under VIMAGE_GLOBAL as the globals themsevles are already.
This will help by the time when we are going to remove the globals
entirely.
Sponsored by: The FreeBSD Foundation
state changes. This change modifies tunopen and tunclose to call the
if_link_state_change() function. Among other things, this will result in
devd(8) receiving events from devctl(4) for linkup/link down. This allows
us to do several useful things, including initializing tunnel parameters
and adding routes.
Discussed on: freebsd-net@
MFC after: 2 weeks
missed under VIMAGE_GLOBAL.
Start putting the extern declarations of the virtualized globals
under VIMAGE_GLOBAL as the globals themsevles are already.
This will help by the time when we are going to remove the globals
entirely.
While there garbage collect a few dead externs from ip6_var.h.
Sponsored by: The FreeBSD Foundation
container structures, depending on VIMAGE_GLOBALS compile time option.
Make VIMAGE_GLOBALS a new compile-time option, which by default will not
be defined, resulting in instatiations of global variables selected for
V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be
effectively compiled out. Instantiate new global container structures
to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0,
vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0.
Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_
macros resolve either to the original globals, or to fields inside
container structures, i.e. effectively
#ifdef VIMAGE_GLOBALS
#define V_rt_tables rt_tables
#else
#define V_rt_tables vnet_net_0._rt_tables
#endif
Update SYSCTL_V_*() macros to operate either on globals or on fields
inside container structs.
Extend the internal kldsym() lookups with the ability to resolve
selected fields inside the virtualization container structs. This
applies only to the fields which are explicitly registered for kldsym()
visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently
this is done only in sys/net/if.c.
Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code,
and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in
turn result in proper code being generated depending on VIMAGE_GLOBALS.
De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c
which were prematurely V_irtualized by automated V_ prepending scripts
during earlier merging steps. PF virtualization will be done
separately, most probably after next PF import.
Convert a few variable initializations at instantiation to
initialization in init functions, most notably in ipfw. Also convert
TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in
initializer functions.
Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
