extension.
Add ability to create a preload disk giving an address and a length
(suggested by imp)
Fix bug relating to very small md(4) devices.
Update md.c copyright to reflect the status of code copied from vn.c.
(noticed by dillon)
I decided to work on the md(4) driver and integrate the vn(4)
functionality into it mainly based on the name being more suitable.
Ideally 'vd' as in "virtual disk" would probably be the most logical
but our sound-master pointed out that this would cause uncontrollable
fits of giggles in the brits. Another complication would the needed
changes to the ramdisk boot/root functionality.
The vn driver will stay around for some time after I complete this
merge for transition reasons, and I'll make it whine to people that
they should migrate to the md(4) driver for some time before it
dies.
The kernel part of the new md(4) driver will be committed after more
testing.
parallel fsck's one per drive, use the shortest prefix ending in
a digit rather than the longest prefix ending in a digit.
This makes "/dev/ad0s1a" and "/dev/ad0s2a" appear to both reside
on the disk "/dev/ad0" and consequently they will be fsck'ed
sequentially rather than in parallel as now.
In general this heuristic is rather soft and errorprone. For
instance ccd may often reside on two or more physical disks. A
good solution would be to look for passes larger than 1 until no
disks are found in a particular pass, that way people could put
ccd stripes in pass 3... and have them fsck'ed sequentially.
Reviewed by: mjacob
directories in addition to world-writable directories. As before,
this check can be disabled with the "-i" option, which in turn can
be made the default for boot-up by setting "ldconfig_insecure=YES"
in "/etc/rc.conf".
Also fix an mdoc nit in the manual page.
Submitted by: Maxime Henrion <mux@qualys.com>
a SIGINFO (normally via Ctrl-T), a line will be output indicating
the current phase number and progress information relevant to the
current phase.
Approved by: mckusick
corrects cases where restore would spew an infinite stream of
"Changing volumes on pipe input?" messages, or would loop waiting
for a response to the "set owner/mode for '.'" question.
PR: bin/14250
Reviewed by: dwmalone
We need to parse the arguments first, then open the device (if
specified) and then apply the changes. This change will disallow the
(undocumented) use of multiple instances of the same argument on the
same command line for the sack of a better error message.
Other changes are:
1) the softupdates (-n) now issue a warning about remaining unchanged
2) the usage and man page is changed to specify "space | time" instead of
"optimization preference".
PR: bin/23335
Submitted by:Mark Peek <mark@whistle.com>
Remove some PNP-related dead code that is unlikely to survive the
changes in -current PNP anyway.
Submitted by: fixes from Chris Faulhaber <jedgar@freebsd.org>
files. Mostly -I${.CURDIR} was needed -- especially for YACC generated
files as the new cpp does not look in the ultimate source file
(ie, the .y file)'s directory as told by the "#line" directive. Some were
misspellings of "-I${.CURDIR}" as "-I.".
touch ups. The cache needs to be flushed against block
reads, and a final flush at process termination to force the
backup superblocks to disk.
I believe this will allow 'make release' to complete.
Submitted by: Tor.Egge@fast.no
returns doesn't exist, or doesn't match the desired device, fall back to
scanning /dev for a matching node, and as a last resort, if that fails,
try to create the node ourselves as /dev/dump.
Add comments to several variables and functions.
Clean up syslog(3) usage; use %m instead of strerror(3).
Other minor cleanup.
for large scsi disks with WCE = 0. This yields around a 7 times speedup
on elapsed newfs time on test disks here. 64k clusters seems to be the
sweet spot for scsi disks using our present drivers.
mount_ifs: repocopy of sbin/mount, with most of the intelligence ripped out
and "ufs" replaced with "ifs" in the right places. It will only
mount a single filesystem, rather than the -t <type> magic that
our real mount does.
fsck_ifs: repocopy of sbin/fsck_ffs, but the directory structure stuff
(pass2 and some refcount checks) has been #ifdef'ed out.
src/sbin/Makefile: Build these two utilities
There is probably cruft code left in both which can be removed at a later
date, especially in mount_ifs, but I trust that people will not try
mount_ifs -a ..
Note: there are no man pages installed for these two commands as I haven't
actually written them yet.
Approved by: rwatson
Obtained from: NetBSD source tree
Second part of the fsck wrappers commit. This commit enables the new fsck
code (removing the fsck/* code and replacing it with the netbsd fsck
wrapper code), and enabling some FFS-based utilities to compile.
Details:
* quotacheck, fsdb required modification to use the fsck_ffs/ code rather
than fsck/ . This might change later since quotacheck requires preen.c
which should exist in fsck/ rather than fsck_ffs/
* src/Makefile has fsck_ffs added to it so it it built as part of the tree
now
* share/doc/smm/03.fsck/ uses the SMM.doc/ stuff from fsck_ffs, not fsck.
I've tested this, and it shouldn't require any changes on your machine.
The fsck wrapper reads /etc/fsck and is command-line-compatible enough
to not require rc changes (well, most changes unless you want to do
anything nifty by specifying the fs types explicityly, read the man page
if you want further details on what it can do.)
This now allows us to support multiple filesystem types during bootup.
Approved by: rwatson
Obtained from: NetbSD source tree
Second part of the fsck wrappers commit. This commit enables the new fsck
code (removing the fsck/* code and replacing it with the netbsd fsck
wrapper code), and enabling some FFS-based utilities to compile.
Details:
* quotacheck, fsdb required modification to use the fsck_ffs/ code rather
than fsck/ . This might change later since quotacheck requires preen.c
which should exist in fsck/ rather than fsck_ffs/
* src/Makefile has fsck_ffs added to it so it it built as part of the tree
now
* share/doc/smm/03.fsck/ uses the SMM.doc/ stuff from fsck_ffs, not fsck.
I've tested this, and it shouldn't require any changes on your machine.
The fsck wrapper reads /etc/fsck and is command-line-compatible enough
to not require rc changes (well, most changes unless you want to do
anything nifty by specifying the fs types explicityly, read the man page
if you want further details on what it can do.)
This now allows us to support multiple filesystem types during bootup.
utilities which use bits of fsck_ffs - namely quotacheck and fsdb.
In depth, utilities.c contains blockcheck() which is needed by both,
but also a slew of routines which require bits of the FFS code to be
compiled in. This breaks the fs-specific and non-fs-specific code
up into two files (well, blockcheck() is the only routine in utilities.c,
that'll change later) which makes building fsck_ffs, quotacheck and
fsdb work yet again.
(You won't find commits to fsdb and quotacheck here before I haven't
committed the post-fsck-wrappers version of them yet.)
Approved by: rwatson
Obtained from: NetBSD-current source tree
The beginnings of the fsck wrappers stuff from NetBSD. This particular commit
brings a newly repo-copied sbin/fsck_ffs/ (from sbin/fsck/) into fsck wrappers
mode.
A quick overview (the code reflects this):
* Documentation changed to reflect fsck_ffs instead of fsck
* Simply acts on a single filesystem, doesn't try to do any multiple filesystem
magic - this is done by the fsck wrappers now
And then specific to fsck_ffs:
* link to /sbin/fsck_4.2bsd and /sbin/fsck_ufs. This is because right now
the filesystem is of type ufs not ffs, and that during autodetection the
labeltype rather than the VFS type is used - this is because when doing
an autodetection of filesystem type in the fsck wrapper program, it does
not have any link between label type (4.2bsd, vinum, etc) and VFS string.
Note that this shouldn't break a build since the required buildworld Makefile
magic and import of the fsck wrapper code into src/sbin/fsck/ will happen
in a seperate commit.
argument only. Before that, the `route add default gateway' first tried
the `gateway' as network address and passed its name to getnetbyname(3),
which in the BIND resolution case does the T_PTR lookup on that name.
1) use devname() instead of searching /dev for the dump device
2) use fopen() instead of open() so we don't need to differentiate
between compressing and not compressing when writing the core
file or the kernel (zopen() returns a FILE *, so we just use
fwrite() in both cases)
There should be no functional changes.
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback
functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch:
. getgrent, getgrnam, getgrgid
. getpwent, getpwnam, getpwuid
. getusershell
. getaddrinfo
. gethostbyname, gethostbyname2, gethostbyaddr
. getnetbyname, getnetbyaddr
. getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified
to warn that host.conf is no longer used at boot time. In addition, if
there is a host.conf but no nsswitch.conf, the latter is created at boot
time from the former.
Obtained from: NetBSD
adjust the size, but the actual end.
- Break out some of the sanity checks on partitions into a sanitize_partition
function.
- When adjusting partitions, always adjust the start "up", and the end "down"
so that we stay within the boundaries of the original request.
- Various small nits found by bde.
Reported by: bde, imp, rgrimes
verbose mode) is specified. This should really have been the case
when this extra cruft was first introduced in rev 1.23.
PR: 20710
Reported by: Mike Meyer <mwm@mired.org>
related patches. These include:
* Mode page editting can be scripted. This involves two
things: first, if stdin is not a tty, changes are read from
stdin rather than invoking $EDITOR. Second, and more
importantly, not all modepage entries must be included in the
change set. This means that camcontrol can now gracefully handle
more intrusive editting from the $EDITOR, including removal or
rearrangement of lines. It also means that you can do stuff
like:
# echo "WCE: 1" | camcontrol modepage da3 -m 8 -e
# newfs /dev/da3
# echo "WCE: 0" | camcontrol modepage da3 -m 8 -e
* Range-checking on user-supplied input values. modeedit.c now
uses the field width specifiers to determine the maximum
allowable value for a field. If the user enters a value larger
than the maximum, it clips the value to the max and warns the
user. This also involved patching cam_cmdparse.c to be more
consistent with regards to the "count" parameter to arg_put
(previously is was the length of strings and 1 for all integral
types). The cam_cdbparse(3) man page was also updated to reflect
the revised semantics.
* In the process, I removed the 64 entry limit on mode pages (not
that we were even close to hitting that limit). This was a nice
side-effect of the other changes.
* Technically, the new mode editting functionality allows editting
of character array entries in mode pages (type 'c' or 'z'),
however since buff_encode doesn't grok them it is currently
useless.
* Camcontrol gained two new options related to mode pages: -l and
-b. The former lists all available mode pages for a given
device. The latter forces mode page display in binary format
(the default when no mode page definition was found in
scsi_modes).
* Added support for mode page names to scsi_modes. Allows names to
be displayed alongside mode numbers in the mode page
listing. Updated scsi_modes to use the new functionality. This
also adds the semicolon into the scsi_modes syntax as an
optional mode page definition terminator. This is needed to name
pages without providing a page format definition.
* Updated scsi_all.h to include a structure describing mode page
headers.
* Added $FreeBSD$ line to scsi_modes.
Inspired by: dwhite
Reviewed by: ken
