Commit Graph

10 Commits

Author SHA1 Message Date
Konstantin Belousov
a2a0f90654 Centralize __pcpu definitions.
Many extern struct pcpu <something>__pcpu declarations were
copied/pasted in sources.  The issue is that the definition is MD, but
it cannot be provided by machine/pcpu.h due to actual struct pcpu
defined in sys/pcpu.h later than the inclusion of machine/pcpu.h.
This forced the copying when other code needed direct access to
__pcpu.  There is no way around it, due to machine/pcpu.h supplying
part of struct pcpu fields.

To work around the problem, add a new machine/pcpu_aux.h header, which
should fill any needed MD definitions after struct pcpu definition is
completed. This allows to remove copies of __pcpu spread around the
source.  Also on x86 it makes it possible to remove work arounds like
OFFSETOF_CURTHREAD or clang specific warnings supressions.

Reported and tested by:	lwhsu, bcran
Reviewed by:	imp, markj (previous version)
Discussed with:	jhb
Sponsored by:	The FreeBSD Foundation
Differential revision:	https://reviews.freebsd.org/D21418
2019-08-29 07:25:27 +00:00
Konstantin Belousov
cbb65b7ec5 i386: Do not ever store to other-CPU counter64 slot.
On CPUs supporting cmpxchg8b, fetch is performed by cmpxchg8b on
corresponding CPU slot, which unconditionally write to the slot.  If
for that slot, the owner CPU increments it, then both CPUs might run
the cmpxchg8b instruction concurrently and this might race and
override the incremental write.  So the counter update would be lost.

Fix it by implementing fetch as IPI and accumulation of result.  It is
acceptable for rare counter64 fetch operation to be more expensive.

Diagnosed and tested by:	Andreas Longwitz <longwitz@incore.de>
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2019-02-03 21:28:58 +00:00
Matt Macy
ab3059a8e7 Back pcpu zone with domain correct pages
- Change pcpu zone consumers to use a stride size of PAGE_SIZE.
  (defined as UMA_PCPU_ALLOC_SIZE to make future identification easier)

- Allocate page from the correct domain for a given cpu.

- Don't initialize pc_domain to non-zero value if NUMA is not defined
  There are some misconceptions surrounding this field. It is the
  _VM_ NUMA domain and should only ever correspond to valid domain
  values as understood by the VM.

The former slab size of sizeof(struct pcpu) was somewhat arbitrary.
The new value is PAGE_SIZE because that's the smallest granularity
which the VM can allocate a slab for a given domain. If you have
fewer than PAGE_SIZE/8 counters on your system there will be some
memory wasted, but this is obviously something where you want the
cache line to be coming from the correct domain.

Reviewed by: jeff
Sponsored by: Limelight Networks
Differential Revision:  https://reviews.freebsd.org/D15933
2018-07-06 02:06:03 +00:00
Pedro F. Giffuni
83ef78be95 sys/i386: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:08:52 +00:00
Gleb Smirnoff
83c9dea1ba - Remove 'struct vmmeter' from 'struct pcpu', leaving only global vmmeter
in place.  To do per-cpu stats, convert all fields that previously were
  maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
  before we have set up UMA and we can do counter_u64_alloc(), provide an
  early counter mechanism:
  o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
  o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
    so that at early stages of boot, before counters are allocated we already
    point to a counter that can be safely written to.
  o For sparc64 that required a whole dummy pcpu[MAXCPU] array.

Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
  to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.

This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html

Reviewed by:	kib, gallatin, marius, lidl
Differential Revision:	https://reviews.freebsd.org/D10156
2017-04-17 17:34:47 +00:00
Patrick Kelsey
67d955aab4 Corrected misspelled versions of rendezvous.
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().

Reviewed by:	gnn, kib
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D10313
2017-04-09 02:00:03 +00:00
Nathan Whitehorn
96c85efb4b Replace a number of conflations of mp_ncpus and mp_maxid with either
mp_maxid or CPU_FOREACH() as appropriate. This fixes a number of places in
the kernel that assumed CPU IDs are dense in [0, mp_ncpus) and would try,
for example, to run tasks on CPUs that did not exist or to allocate too
few buffers on systems with sparse CPU IDs in which there are holes in the
range and mp_maxid > mp_ncpus. Such circumstances generally occur on
systems with SMT, but on which SMT is disabled. This patch restores system
operation at least on POWER8 systems configured in this way.

There are a number of other places in the kernel with potential problems
in these situations, but where sparse CPU IDs are not currently known
to occur, mostly in the ARM machine-dependent code. These will be fixed
in a follow-up commit after the stable/11 branch.

PR:		kern/210106
Reviewed by:	jhb
Approved by:	re (glebius)
2016-07-06 14:09:49 +00:00
Konstantin Belousov
70a7dd5d5b Fix issues with zeroing and fetching the counters, on x86 and ppc64.
Issues were noted by Bruce Evans and are present on all architectures.

On i386, a counter fetch should use atomic read of 64bit value,
otherwise carry from the increment on other CPU could be lost for the
given fetch, making error of 2^32.  If 64bit read (cmpxchg8b) is not
available on the machine, it cannot be SMP and it is enough to disable
preemption around read to avoid the split read.

On x86 the counter increment is not atomic on purpose, which makes it
possible for the store of the incremented result to override just
zeroed per-cpu slot.  The effect would be a counter going off by
arbitrary value after zeroing.  Perform the counter zeroing on the
same processor which does the increments, making the operations
mutually exclusive.  On i386, same as for the fetching, if the
cmpxchg8b is not available, machine is not SMP and we disable
preemption for zeroing.

PowerPC64 is treated the same as amd64.

For other architectures, the changes made to allow the compilation to
succeed, without fixing the issues with zeroing or fetching.  It
should be possible to handle them by using the 64bit loads and stores
atomic WRT preemption (assuming the architectures also converted from
using critical sections to proper asm).  If architecture does not
provide the facility, using global (spin) mutex would be non-optimal
but working solution.

Noted by:  bde
Sponsored by:	The FreeBSD Foundation
2013-07-01 02:48:27 +00:00
Konstantin Belousov
706c56e4a9 Pass the segmented address of the counter, based on %fs, i.e. offset
from the pcpu[0] to the counter base, instead of the linear address.
2013-04-09 17:55:39 +00:00
Gleb Smirnoff
4e76af6a41 Merge from projects/counters: counter(9).
Introduce counter(9) API, that implements fast and raceless counters,
provided (but not limited to) for gathering of statistical data.

See http://lists.freebsd.org/pipermail/freebsd-arch/2013-April/014204.html
for more details.

In collaboration with:	kib
Reviewed by:		luigi
Tested by:		ae, ray
Sponsored by:		Nginx, Inc.
2013-04-08 19:40:53 +00:00