- let the loop iterate every page (as intended), and not some multiplies
(which led to a fake exhaustion of the ARM_NOCACHE_KVA_SIZE)
- eliminate using MIN(): it compared number of pages vs. address
(ARM_TP_ADDRESS), which was bogus
Reviewed by: cognet, imp
Obtained from: Piotr Ziecik kosmo ! semihalf dot com
MFC after: 3 days
PZERO + 1. The sleeping process at the priority <= PZERO is counted as
blocked, or, as comment states, 'disk wait'. PZERO + 1 works as well,
and does not cause user confusion.
Reported by: sam <samflanker at gmail com>
MFC after: 1 week
commit, calling i386_parsedev(..., X, ...) where X is "ad", "bge", or
any other disk or network device name without a unit number, would
result in dereferencing whatever happened to be on the stack where the
variable "cp" is stored.
Found by: LLVM/Clang Static Checker
watchdog timeout issues and the root cause seems to stem from
silicon bug of controller. Personally I couldn't reproduce it on
RTL8169 controller but it seems it's dependent on usage pattern.
For newer PCIe based controllers I have no TSO complaints but
turning off TSO would be more safe. Users who are sure that
their controller works with TSO can still reenable the TSO with
ifconfig(8).
Reported by: Oliver Lehmann (lehmann at ans-netz dot de), Eugene Butusov (ebutusov at gmail dot com)
11bits. This limits the maximum interface MTU size in TSO case
as upper stack should not generate TCP segments with MSS greater
than the limit. Armed with this information, disable TSO if
interface MTU is greater than the limit.
lstat(2) is called on symlinks -- this code appears never to have
worked. The PR this addresses suggests that the intended
original behavior is the right one, but as bde points out in the
PR comments, we do actually support storing a mode on symlinks,
so returning it seems reasonable.
This is consistent with Mac OS X, which despite documentation to
the contrary does return the mode set on a symlink, but not some
other platforms. The Single Unix Spec requires only that the
returned bits be "meaningful", which seems at best unhelpful as
advice goes.
PR: 25018
MFC after: 3 days
vnode lock may cause a LOR between kld_sx lock and vnode lock.
linker_load_dependencies() drops kld_sx, and another thread may attempt
to load the same kld.
Reported and tested by: pjd
MFC after: 1 week
As clearly mentioned on the mailing lists, there is a list of drivers
that have not been ported to the MPSAFE TTY layer yet. Remove them from
the kernel configuration files. This means people can now still use
these drivers if they explicitly put them in their kernel configuration
file, which is good.
People should keep in mind that after August 10, these drivers will not
work anymore. Even though owners of the hardware are capable of getting
these drivers working again, I will see if I can at least get them to a
compilable state (if time permits).
code interfered with Performant mode and legacy interrupts. Also
remove a register read operation on the Simplq code that was
effectively a time-wasting no-op.
As of r178766 this driver didn't compile anymore, because it missed a
switch()-statement. I'm getting tired of seeing this driver being broken
for two months already. When I run `make universe', everything passes,
except the BWCT kernel configuration file.
don't support the ioapic either, so remove that option too. These
were commented out, but could never be enabled, unlike the other
options in the file that are commented out.
pmap_change_attr() in order to use the direct map for any cache mode, not
just write-back mode.
It is worth noting that this change also eliminates a situation in which we
have two mappings to the same physical memory with different cache modes.
Submitted by: Magesh Dhasayyan (with some changes by me)
Discussed with: jhb
keyword. But it doesn't work. Two options.. make it no longer accept it,
or actually make it work.. I chose the 2nd..
Allow the tablearg to be used to specify a skipto destination.
This is actually a very powerful construct if used correctly, or a sink
of cpu cycles if used badly.
changes t teh man page will follow.
There is no way for the caller to tell us which direction this packet is
going. With the bpf_mtap{2} routines, we can check the interface pointer.
MFC after: 2 weeks
mode changes, and cache and TLB invalidation when some or all of the
specified range is already mapped with the specified cache mode.
Submitted by: Magesh Dhasayyan
return success if the passed vnode pointer is NULL (rather than
panicking). This can occur if either audit or accounting are
disabled while the policy is running.
Since the swapoff control has no real relevance to this policy,
which is concerned about intent to write rather than water under the
bridge, remove it.
PR: kern/126100
Reported by: Alan Amesbury <amesbury at umn dot edu>
MFC after: 3 days
processes are not producing absolute pathname tokens. It is required
that audited pathnames are generated relative to the global root mount
point. This modification changes our implementation of audit_canon_path(9)
and introduces a new function: vn_fullpath_global(9) which performs a
vnode -> pathname translation relative to the global mount point based
on the contents of the name cache. Much like vn_fullpath,
vn_fullpath_global is a wrapper function which called vn_fullpath1.
Further, the string parsing routines have been converted to use the
sbuf(9) framework. This change also removes the conditional acquisition
of Giant, since the vn_fullpath1 method will not dip into file system
dependent code.
The vnode locking was modified to use vhold()/vdrop() instead the vref()
and vrele(). This will modify the hold count instead of modifying the
user count. This makes more sense since it's the kernel that requires
the reference to the vnode. This also makes sure that the vnode does not
get recycled we hold the reference to it. [1]
Discussed with: rwatson
Reviewed by: kib [1]
MFC after: 2 weeks
proved to be necessary to make the static drivers work
in EITHER/OR or BOTH configurations. Modules will still
build in sys/modules/igb or em as before.
This also updates the igb driver for support for the 82576
adapter, adds shared code fixes, and etc....
MFC after: ASAP
support for bpf(4) due to hacks in the Y! tree for a truss32 binary
(since superseded by native support for 32-bit binaries in truss itself).
MFC after: 1 week
to downgrade the exclusive lock to shared one when exclusive lock owner
requested shared lock. New lockmgr panics instead.
The vnode_pager_lock function requests shared lock on the vnode backing
the OBJT_VNODE, and can be called when the current thread already holds
an exlcusive lock on the vnode. For instance, it happens when handling
page fault from the VOP_WRITE() uiomove that writes to the file, with
the faulted in page fetched from the vm object backed by the same file.
We then get the situation described above.
Verify whether the vnode is already exclusively locked by the curthread
and request recursed exclusive vnode lock instead of shared, if true.
Reported by: gallatin
Discussed with: attilio
well as the 15C since it seems to be required in practice. The Linux
natsemi.c driver mostly does this as well.
PR: kern/112179
Submitted by: Mark Willson mark - hydrus org uk
MFC after: 1 week
It seems we only use `lbolt' inside the VFS syncer and the TTY layer
now. Because I'm planning to replace the TTY layer next month, there's
no reason to keep `lbolt' if it's only used in a single thread inside
the kernel.
Because the syncer code wanted to wake up the syncer thread before the
timeout, it called sleepq_remove(). Because we now just use a condvar(9)
with a timeout value of `hz', we can wake it up using cv_broadcast()
without waking up any unrelated threads.
Reviewed by: phk
After the import of the new TTY layer, the TTY_QUOTE definition will not
be present anymore. To make sure clists will still work as expected,
introduce an internal definition called QUOTEMASK.
Maybe we can decide to remove the quote bits entirely, but we still have
to look into this. There may be drivers that still use the quote bits.
Obtained from: //depot/projects/mpsafetty
the 32bit images on amd64.
Change the semantic of the PCB_32BIT pcb flag to request the context
switch code to operate on the segment registers. Its previous meaning
of saving or restoring the %gs base offset is assigned to the new
PCB_GS32BIT flag.
FreeBSD 32bit image activator sets the PCB_32BIT flag, while Linux 32bit
emulation sets PCB_32BIT | PCB_GS32BIT.
Reviewed by: peter
MFC after: 2 weeks
sockets for IPv6 raw sockets: separately lock the inpcb for determining
the destination address for a connect()'d raw socket at the rip6_send()
layer, and then re-acquire the inpcb lock in the rip6_output() layer to
query other options on the socket. Previously, the global raw IP socket
lock was used, which while correct and marginally more consistent, could
add significantly to global raw IP socket lock contention.
MFC after: 1 week
