We want to keep our root file system open to preserve bcache segment
between file accesses, thus reducing physical disk IO.
Reviewed by: imp, allanjude, kevans (previous version)
Differential Revision: https://reviews.freebsd.org/D30848
MFC after: 1 month
Summary:
Open file list is currently created as statically allocated array (64 items).
Once this array is filled up, loader will not be able to operate with files.
In most cases, this mechanism is good enough, but the problem appears, when
we have many disks with zfs pool(s). In current loader implementation, all
discovered zfs pool configurations are kept in memory and disk devices open -
consuming the open file array. Rewrite the open file mechanism to use
dynamically allocated list.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31364
servip is set from bootp bp_siaddr (if present) and rootip is
set immediately from servip in tha sane bootp code.
However, the common/dev_net.c does only set rootip (based on
url processing etc). Therefore, we should also use rootip in tftp
reader.
Fixes hung tftp based boot when bp_siaddr is not provided.
MFC after: 1 week
In my initial testing, these are the functions which showed up as
being worth instrumenting. More may be added later.
common/console.c: cons_probe
common/gfx_fb.c: read_list, insert_font, autoload_font
common/interp.c: interact
common/interp_lua.c: interp_init, interp_run
efi/libefi/efipart.c: efipart_readwrite
i386/libi386/biosdisk.c: bd_init, bd_open, bd_edd_io, bd_chs_io, bd_io
libsa/open.c: open
libsa/read.c: read
libsa/twiddle.c: twiddle
Note that profiling interp_run may be of questionable utility as it
may depend on user behaviour (e.g. pressing keys).
Reviewed by: kevans (earlier version)
At present this only supports x86, due to the use of the rdtsc
instruction; and is inert unless a buffer is allocated and passed to
the tslog code (which will be done by a future commit).
Reviewed by: kevans
A bug in the loader's bzipfs & gzipfs filesystems caused compressed
kernel and modules not to work on EFI systems with a veriexec-enabled
loader. Since the size of files in these filesystems are not known
_a priori_ `stat` would initialize the size to -1 and the loader would
then hang in an infinite loop while trying to seek (read) to the end
of file since the loop termination condition compares the current
offset to that negative target position.
Reviewers: vangyzen, imp, Bret Ketchum (Bret.Ketchum@dell.com)
Differential Revision: https://reviews.freebsd.org/D30414
Sponsored by: Dell EMC Isilon
MFC to: stable/12, stable/13
MFC after: 1 week
LLVM12 complains if you change the symbol binding:
`error: _longjmp changed binding to STB_GLOBAL`
In this case LLVM actually ignored the weak directive and used the
later .global, but GNU as would mark the symbol as weak.
None of the other architectures mark the libsa _setjmp as weak so
just drop this directive.
Parentheses added to HASZERO macro to avoid a GCC warning, and formatted
with clang-format as we have adopted these and don't consider them
'contrib' code.
Obtained from: musl (snapshot at commit 4d0a82170a25)
Reviewed by: kib (libc integration), mjg (both earlier)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17630
Notable upstream changes:
778869fa1 Fix reporting of mount progress
e7adccf7f Disable use of hardware crypto offload drivers on FreeBSD
03e02e5b5 Fix checksum errors not being counted on repeated repair
64e0fe14f Restore FreeBSD resource usage accounting
11f2e9a49 Fix panic if scrubbing after removing a slog device
MFC after: 2 weeks
Caller is not interested in symlinks follow them.
Throw an error if too many links encountered.
Reviewed by: stevek
Sponsored by: Juniper Networks
--This line, and those below, will be ignored--
> Description of fields to fill in above: 76 columns --|
> PR: If a GNATS PR is affected by the change.
> Differential Revision: https://reviews.freebsd.org/D### (*full* phabric URL needed).
> Submitted by: If someone else sent in the change.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after: N [day[s]|week[s]|month[s]]. Request a reminder email.
> MFH: Ports tree branch name. Request approval for merge.
> Relnotes: Set to 'yes' for mention in release notes.
> Security: Vulnerability reference (one per line) or description.
> Sponsored by: If the change was sponsored by an organization.
> Empty fields above will be automatically removed.
Change-Id: I4ef92ff256f503c620dc5bba79ed93b32cb2330d
The integer arrays are encoded in nvlist as counted array <count, i0, i1...>,
loader xdr_array() is missing the count. This will affect the pool import when
there are hole devices in pool.
Also fix the new data add and print functions.
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
We don't have NEON available in the boot loader, so we have to disable
it. OpenZFS included ZSTD which used the wrong symbol to bring in neon
support. Change to use the code that's been submitted upstream as a
pull request to both.
__ARM_NEON is the proper symbol, defined in ARM C Language Extensions
Release 2.1 (https://developer.arm.com/documentation/ihi0053/d/). Some
sources suggest __ARM_NEON__, but that's the obsolete spelling from
prior versions of the standard.
OpenZFS Pull Request: https://github.com/openzfs/zfs/pull/11055
ZSTD Pull Request: https://github.com/facebook/zstd/pull/2356
We are using asize property from pool label and we do not depend
on partition data to find last two pool labels and to validate LBA for disk IO.
This does allow us to re-enable support for partitionless disk setups.
The OpenZFS code that uses the BMI instructions is broken. Forcibly
disable them to prevent their use. When enabled, the build breaks.
This fixes the build when compiled for a core with BMI instructions.
This is the same fix committed in r364777, for the same issue.
Submitted by: Jung-uk Kim
Add support to the _STANDALONE environment enough bits of the kernel
that we can compile it. We still have a small zstd_shim.c since there
were 3 items that were a bit hard to nail down and may be cleaned up
in the future. These go hand in hand with a number of commits to
sys/sys in the past weeks, should this need be MFCd.
Discussed with: mmacy (in review and on IRC/Slack)
Reviewed by: freqlabs (on openzfs repo)
Differential Revision: https://reviews.freebsd.org/D26218
OpenZFS will start using some of the kernel timekeeping bits
shortly. This implements the bare minimum of that which currently
is just the time_seconds variable.
During devswitch probe, we pick boot pool based on boot disk, if the boot
disk happens to have multiple pools in freebsd-zfs partitions, the current
code does pick last pool from boot disk as boot pool. While there is no
way at that stage to test, the more logical approach would be to pick
first matching pool.
This patch is assuming we do pass pool guid pointer with guid value 0,
this will help us to determine, if the guid value is already set or not.
The general suggestion would be not to share disk between different pools.
Reported by: Alexander Leidinger
There was a small window cp was broken. Work around this by using :>
instead of cp /dev/null. Ideally, we'd keep the cp /dev/null in the
build as a regression test, but doing so breaks people that upgraded
during the cp breakage and this is simpler than bootstrapping a
working cp since there's no good __FreeBSD_version sign posts for
that.
Suggested by: lots of people
Too stubborn for his own good: imp
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
Move hexdump from stand/common/misc.c to stand/libsa/hexdump.c
(svn cp)
Disable use of pager - causes linking issue for boot1
can be re-enabled by defining HEXDUMP_PAGER.
Reviewed by: stevek, imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D26235
Please note that neither zstd nor encryption is
supported by the loader at this instant. This
change makes it safe to use those features in
one's root pool, but not in one's root dataset.
It can be useful to know what type of machine we are running on for desktop
related thing.
It also allow us to support all the DMI variable that linux driver can fetch.
MFC after: 1 week
Sponsored by: Sponsored-by: The FreeBSD Foundation
The checkpoints are another way of keeping the state of ZFS.
During the rewind, the pool has to be exported.
This makes checkpoints unusable when using ZFS as root.
Add the option to rewind the ZFS checkpoint at the boot time.
If checkpoint exists, a new option for rewinding a checkpoint will appear in
the bootloader menu.
We fully support boot environments.
If the rewind option is selected, the boot loader will show a list of
boot environments that existed before the checkpoint.
Reviewed by: tsoome, allanjude, kevans (ok with high-level overview)
Differential Revision: https://reviews.freebsd.org/D24920
Because we need to read asize from vdev_tree. We also need to consider
different vdev type difference.
Reviewed by: allanjude
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25586
The DIOCGMEDIASIZE is calculated md->md_sectorsize * md->md_provsize, and
for boot disk, the md_sectorsize is 4k. However, the md_provsize is already
in units of bytes.
Sponsored by: Netflix, Klara Inc.
The vdev_init() does check for "known" vdev types, the [log] device removal will create "hole"
device, but vdev_init() does not allow it.
Obtained from: illumos
MFC after: 1 week
We should have nextboot feature implemented in libsa zfs code.
To get there, I have created zfs_nextboot() implementation based on
two sources, our current simple textual string based approach with added
structured boot label PAD structure from OpenZFS.
Secondly, all nvlist details are moved to separate source file and
restructured a bit. This is done to provide base support to add nvlist
add/update feature in followup updates.
And finally, the zfsboot/gptzfsboot disk access functions are swapped to use
libi386 and libsa.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25324
fs_summary_info structure. This change was originally done
by the CheriBSD project as they need larger pointers that
do not fit in the existing superblock.
This cleanup of the superblock eases the task of the commit
that immediately follows this one.
Suggested by: brooks
Reviewed by: kib
PR: 246983
Sponsored by: Netflix