Commit Graph

65 Commits

Author SHA1 Message Date
Bjoern A. Zeeb
89856f7e2d Get closer to a VIMAGE network stack teardown from top to bottom rather
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.

Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.

Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.

For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.

Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.

For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).

Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.

Approved by:		re (hrs)
Obtained from:		projects/vnet
Reviewed by:		gnn, jhb
Sponsored by:		The FreeBSD Foundation
MFC after:		2 weeks
Differential Revision:	https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
Pedro F. Giffuni
155d72c498 sys/net* : for pointers replace 0 with NULL.
Mostly cosmetical, no functional change.

Found with devel/coccinelle.
2016-04-15 17:30:33 +00:00
Alexander V. Chernikov
1a75e3b20f Make checks for rt_mtu generic:
Some virtual if drivers has (ab)used ifa ifa_rtrequest hook to enforce
route MTU to be not bigger that interface MTU. While ifa_rtrequest hooking
might be an option in some situation, it is not feasible to do MTU checks
there: generic (or per-domain) routing code is perfectly capable of doing
this.

We currrently have 3 places where MTU is altered:

1) route addition.
 In this case domain overrides radix _addroute callback (in[6]_addroute)
 and all necessary checks/fixes are/can be done there.

2) route change (especially, GW change).
 In this case, there are no explicit per-domain calls, but one can
 override rte by setting ifa_rtrequest hook to domain handler
 (inet6 does this).

3) ifconfig ifaceX mtu YYYY
 In this case, we have no callbacks, but ip[6]_output performes runtime
 checks and decreases rt_mtu if necessary.

Generally, the goals are to be able to handle all MTU changes in
 control plane, not in runtime part, and properly deal with increased
 interface MTU.

This commit changes the following:
* removes hooks setting MTU from drivers side
* adds proper per-doman MTU checks for case 1)
* adds generic MTU check for case 2)

* The latter is done by using new dom_ifmtu callback since
 if_mtu denotes L3 interface MTU, e.g. maximum trasmitted _packet_ size.
 However, IPv6 mtu might be different from if_mtu one (e.g. default 1280)
 for some cases, so we need an abstract way to know maximum MTU size
 for given interface and domain.
* moves rt_setmetrics() before MTU/ifa_rtrequest hooks since it copies
  user-supplied data which must be checked.
* removes RT_LOCK_ASSERT() from other ifa_rtrequest hooks to be able to
  use this functions on new non-inserted rte.

More changes will follow soon.

MFC after:	1 month
Sponsored by:	Yandex LLC
2014-11-06 13:13:09 +00:00
Hiroki Sato
d6f59204ef Virtualize if_disc(4) cloner. 2014-10-05 19:46:52 +00:00
Gleb Smirnoff
3751dddb3e Mechanically convert to if_inc_counter(). 2014-09-19 10:39:58 +00:00
Gleb Smirnoff
e3a7aa6f56 - Remove rt_metrics_lite and simply put its members into rtentry.
- Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This
  removes another cache trashing ++ from packet forwarding path.
- Create zini/fini methods for the rtentry UMA zone. Via initialize
  mutex and counter in them.
- Fix reporting of rmx_pksent to routing socket.
- Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode.

The change is mostly targeted for stable/10 merge. For head,
rt_pksent is expected to just disappear.

Discussed with:		melifaro
Sponsored by:		Netflix
Sponsored by:		Nginx, Inc.
2014-03-05 01:17:47 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Gleb Smirnoff
47e8d432d5 Add const qualifier to the dst parameter of the ifnet if_output method. 2013-04-26 12:50:32 +00:00
Gleb Smirnoff
42a58907c3 Make the "struct if_clone" opaque to users of the cloning API. Users
now use function calls:

  if_clone_simple()
  if_clone_advanced()

to initialize a cloner, instead of macros that initialize if_clone
structure.

Discussed with:		brooks, bz, 1 year ago
2012-10-16 13:37:54 +00:00
Kip Macy
279aa3d419 Change if_output to take a struct route as its fourth argument in order
to allow passing a cached struct llentry * down to L2

Reviewed by:	rwatson
2009-04-16 20:30:28 +00:00
Yaroslav Tykhiy
68b11e74f4 Add a comment explaining why disc(4) bears the IFF_LOOPBACK flag.
It should be the final follow-up to an old yet unfinished discussion
on whether IFF_LOOPBACK is necessary for disc(4) and why.
2007-10-27 19:57:41 +00:00
Yaroslav Tykhiy
70e04181c2 Fix some statements in disc(4) and about it:
- ifnet is no more embedded in softc;
- the interface name is `disc', not `ds'.
2007-03-26 09:10:28 +00:00
Sam Leffler
6b7330e2d4 Revise network interface cloning to take an optional opaque
parameter that can specify configuration parameters:
o rev cloner api's to add optional parameter block
o add SIOCCREATE2 that accepts parameter data
o rev vlan support to use new api (maintain old code)

Reviewed by:	arch@
2006-07-09 06:04:01 +00:00
Christian S.J. Peron
16d878cc99 Fix the following bpf(4) race condition which can result in a panic:
(1) bpf peer attaches to interface netif0
	(2) Packet is received by netif0
	(3) ifp->if_bpf pointer is checked and handed off to bpf
	(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
	    initialized to NULL.
	(5) ifp->if_bpf is dereferenced by bpf machinery
	(6) Kaboom

This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.

Summary of changes:

- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
  bpf interface structure. Once this is done, ifp->if_bpf should never be
  NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
  a lockless read bpf peer list associated with the interface. It should
  be noted that the bpf code will pickup the bpf_interface lock before adding
  or removing bpf peers. This should serialize the access to the bpf descriptor
  list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
  can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present

Now what happens is:

	(1) Packet is received by netif0
	(2) Check to see if bpf descriptor list is empty
	(3) Pickup the bpf interface lock
	(4) Hand packet off to process

From the attach/detach side:

	(1) Pickup the bpf interface lock
	(2) Add/remove from bpf descriptor list

Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).

[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
    not we have any bpf peers that might be interested in receiving packets.

In collaboration with:	sam@
MFC after:	1 month
2006-06-02 19:59:33 +00:00
Gleb Smirnoff
d314617e8a Force this interface to be RUNNING. 2005-11-11 11:17:57 +00:00
Andrew Thompson
4e7e0183e1 Move the cloned interface list management in to if_clone. For some drivers the
softc lists and associated mutex are now unused so these have been removed.

Calling if_clone_detach() will now destroy all the cloned interfaces for the
driver and in most cases is all thats needed to unload.

Idea by:	brooks
Reviewed by:	brooks
2005-11-08 20:08:34 +00:00
Andrew Thompson
febd0759f3 Change the reference counting to count the number of cloned interfaces for each
cloner. This ensures that ifc->ifc_units is not prematurely freed in
if_clone_detach() before the clones are destroyed, resulting in memory modified
after free. This could be triggered with if_vlan.

Assert that all cloners have been destroyed when freeing the memory.

Change all simple cloners to destroy their clones with ifc_simple_destroy() on
module unload so the reference count is properly updated. This also cleans up
the interface destroy routines and allows future optimisation.

Discussed with:	brooks, pjd, -current
Reviewed by:	brooks
2005-10-12 19:52:16 +00:00
David Malone
01399f34a5 Fix some long standing bugs in writing to the BPF device attached to
a DLT_NULL interface. In particular:

        1) Consistently use type u_int32_t for the header of a
           DLT_NULL device - it continues to represent the address
           family as always.
        2) In the DLT_NULL case get bpf_movein to store the u_int32_t
           in a sockaddr rather than in the mbuf, to be consistent
           with all the DLT types.
        3) Consequently fix a bug in bpf_movein/bpfwrite which
           only permitted packets up to 4 bytes less than the MTU
           to be written.
        4) Fix all DLT_NULL devices to have the code required to
           allow writing to their bpf devices.
        5) Move the code to allow writing to if_lo from if_simloop
           to looutput, because it only applies to DLT_NULL devices
           but was being applied to other devices that use if_simloop
           possibly incorrectly.

PR:		82157
Submitted by:	Matthew Luckie <mjl@luckie.org.nz>
Approved by:	re (scottl)
2005-06-26 18:11:11 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Sam Leffler
89bc9a3171 the rt parameter to ifa_rtrequest callbacks should always be non-null;
eliminate grauitous ptr checks that follow ptr deref's

Noticed by:	Coverity Prevent analysis tool
2005-02-24 01:34:01 +00:00
Warner Losh
c398230b64 /* -> /*- for license, minor formatting changes 2005-01-07 01:45:51 +00:00
Poul-Henning Kamp
3e019deaed Do a pass over all modules in the kernel and make them return EOPNOTSUPP
for unknown events.

A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
2004-07-15 08:26:07 +00:00
Bruce M Simpson
60323f48bd Replace a bzero() after malloc() with M_ZERO. 2004-07-06 03:16:55 +00:00
Bruce M Simpson
832cb4aef7 Style. 2004-07-06 03:07:50 +00:00
Brooks Davis
f889d2ef8d Major overhaul of pseudo-interface cloning. Highlights include:
- Split the code out into if_clone.[ch].
 - Locked struct if_clone. [1]
 - Add a per-cloner match function rather then simply matching names of
   the form <name><unit> and <name>.
 - Use the match function to allow creation of <interface>.<tag>
   vlan interfaces.  The old way is preserved unchanged!
 - Also the match function to allow creation of stf(4) interfaces named
   stf0, stf, or 6to4.  This is the only major user visible change in
   that "ifconfig stf" creates the interface stf rather then stf0 and
   does not print "stf0" to stdout.
 - Allow destroy functions to fail so they can refuse to delete
   interfaces.  Currently, we forbid the deletion of interfaces which
   were created in the init function, particularly lo0, pflog0, and
   pfsync0.  In the case of lo0 this was a panic implementation so it
   does not count as a user visiable change. :-)
 - Since most interfaces do not need the new functionality, an family of
   wrapper functions, ifc_simple_*(), were created to wrap old style
   cloner functions.
 - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible
   IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE
   instead.

Submitted by:   Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1]
Reviewed by:    andre, mlaier
Discussed on:	net
2004-06-22 20:13:25 +00:00
Warner Losh
f36cfd49ad Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
Robert Watson
d6e2616ac3 Introduce disc_mtx to protect the global softc list in if_disc.
Since there are two destroy paths for if_disc interfaces --
module unload and cloan interface destroy, create a new utility
function disc_destroy(), which is callded on a softc after it
has been removed from the global softc list; the cloaner and
module unload entry paths will both remove it before calling
disc_destroy().

Reviewed by:	pjd
2004-03-09 16:31:19 +00:00
Sam Leffler
437ffe1823 o eliminate widespread on-stack mbuf use for bpf by introducing
a new bpf_mtap2 routine that does the right thing for an mbuf
  and a variable-length chunk of data that should be prepended.
o while we're sweeping the drivers, use u_int32_t uniformly when
  when prepending the address family (several places were assuming
  sizeof(int) was 4)
o return M_ASSERTVALID to BPF_MTAP* now that all stack-allocated
  mbufs have been eliminated; this may better be moved to the bpf
  routines

Reviewed by:	arch@ and several others
2003-12-28 03:56:00 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Sam Leffler
d1dd20be6e Locking for updates to routing table entries. Each rtentry gets a mutex
that covers updates to the contents.  Note this is separate from holding
a reference and/or locking the routing table itself.

Other/related changes:

o rtredirect loses the final parameter by which an rtentry reference
  may be returned; this was never used and added unwarranted complexity
  for locking.
o minor style cleanups to routing code (e.g. ansi-fy function decls)
o remove the logic to bump the refcnt on the parent of cloned routes,
  we assume the parent will remain as long as the clone; doing this avoids
  a circularity in locking during delete
o convert some timeouts to MPSAFE callouts

Notes:

1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level
   applications cannot/do-no know about mutex's.  Doing this requires
   that the mutex be the last element in the structure.  A better solution
   is to introduce an externalized version of struct rtentry but this is
   a major task because of the intertwining of rtentry and other data
   structures that are visible to user applications.
2. There are known LOR's that are expected to go away with forthcoming
   work to eliminate many held references.  If not these will be resolved
   prior to release.
3. ATM changes are untested.

Sponsored by:	FreeBSD Foundation
Obtained from:	BSD/OS (partly)
2003-10-04 03:44:50 +00:00
Dag-Erling Smørgrav
fe58453891 Introduce an M_ASSERTPKTHDR() macro which performs the very common task
of asserting that an mbuf has a packet header.  Use it instead of hand-
rolled versions wherever applicable.

Submitted by:	Hiten Pandya <hiten@unixdaemons.com>
2003-04-08 14:25:47 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
6fc32a2495 network interface and link layer changes:
o on input don't strip the Ethernet header from packets
o input packet handling is now done with if_input
o track changes to ether_ifattach/ether_ifdetach API
o track changes to bpf tapping
o call ether_ioctl for default handling of ioctl's
o use constants from net/ethernet.h where possible

Reviewed by:	many
Approved by:	re
2002-11-15 00:00:15 +00:00
Brooks Davis
c69b7ffe7d Make discard devices clonable and unloadable. Also, change the
interface name from ds# to disc#.
2002-05-25 20:20:35 +00:00
Jonathan Lemon
64b15424e4 minor style fix. 2001-12-14 19:28:06 +00:00
Ruslan Ermilov
8071913df2 Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2.
Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *''
as the argument.  Pass rt_addrinfo all the way down to rtrequest1
and ifa->ifa_rtrequest.  3rd argument of ifa->ifa_rtrequest is now
``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is
using it anyways).

Benefit: the following command now works.  Previously we needed
two route(8) invocations, "add" then "change".
# route add -inet6 default ::1 -ifp gif0

Remove unsafe typecast in rtrequest(), from ``rtentry *'' to
``sockaddr *''.  It was introduced by 4.3BSD-Reno and never
corrected.

Obtained from:	BSD/OS, NetBSD
MFC after:	1 month
PR:		kern/28360
2001-10-17 18:07:05 +00:00
Mark Murray
eb6bd5940f This file was a horrible mixture of styles old and new.
Apply style(9).
2001-06-16 10:47:34 +00:00
Peter Wemm
2b12097485 Exterminate the use of PSEUDO_SET() with extreme prejudice. 2001-01-31 07:58:58 +00:00
Yoshinobu Inoue
cfa1ca9dfa udp IPv6 support, IPv6/IPv4 tunneling support in kernel,
packet divert at kernel for IPv6/IPv4 translater daemon

This includes queue related patch submitted by jburkhol@home.com.

Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-07 17:39:16 +00:00
Poul-Henning Kamp
422fd76f84 Set the queue length. 1999-11-12 19:30:08 +00:00
Poul-Henning Kamp
46783fb897 Remove NBPF conditionality of bpf calls in most of our network drivers.
This means that we will not have to have a bpf and a non-bpf version
of our driver modules.

This does not open any security hole, because the bpf core isn't loadable

The drivers left unchanged are the "cross platform" drivers where the respective
maintainers are urged to DTRT, whatever that may be.

Add a couple of missing FreeBSD tags.
1999-09-25 12:06:01 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Dag-Erling Smørgrav
6b5ca0d83e Rename bpfilter to bpf. 1999-07-06 19:23:32 +00:00
Eivind Eklund
537ad9741c Make the use of 'disc' vs 'ds' as prefix consistent by making all 'disc'.
This fix the conflict of having two functions called 'dsioctl()'.
1998-12-14 01:59:16 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Eivind Eklund
1d5e9e2255 Make INET a proper option.
This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway.  Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug.  The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.
1998-01-08 23:42:31 +00:00
Bruce Evans
1fd0b0588f Removed unused #includes. 1997-08-02 14:33:27 +00:00
Bruce Evans
51a534883a Don't include <sys/ioctl.h> in the kernel. Stage 2: include
<sys/sockio.h> instead of <sys/ioctl.h> in network files.
1997-03-24 11:33:46 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00