Add copyiniov() which copies a struct iovec array in from userland into
a malloc'ed struct iovec. Caller frees.
Change uiofromiov() to malloc the uio (caller frees) and name it
copyinuio() which is more appropriate.
Add cloneuio() which returns a malloc'ed copy. Caller frees.
Use them throughout.
assigning a pointer to the list and then dereferencing the pointer as a
second step. When the first spin lock is acquired, curthread is not in
a critical section so it may be preempted and would end up using another
CPUs lock list instead of its own.
When this code was in witness_lock() this sequence was safe as curthread
was in a critical section already since witness_lock() is called after the
lock is acquired.
Tested by: Daniel Lang dl at leo.org
takes an argument to specify if it should preempt or not. Don't preempt
when sched_add_internal() is called from kseq_idled() or kseq_assign()
as in those cases we are about to call mi_switch() anyways. Also, doing
so during the first context switch on an AP leads to a NULL pointer deref
because curthread is NULL.
- Reenable preemption for ULE.
Submitted by: Taku YAMAMOTO taku at tackymt.homeip.net
When avoiding the zeroing of "bogus_page" when it appears in a buf,
be sure to advance the pointers into the data for successive pages.
The bug caused file corruption when read(2)ing from a "hole" in a
file where a previous page of the read block had already been faulted
in: fsx tripped up on this pretty quickly. The particular access
pattern is probably pretty unusual, so other applications probably
wouldn't have had problems, but you'd never know.
Reviewed By: alc@
Rebind the client socket when we experience a timeout. This fixes
the case where our IP changes for some reason.
Signal a VFS event when NFS transitions from up to down and vice
versa.
Add a placeholder vfs_sysctl where we will put status reporting
shortly.
Also:
Make down NFS mounts return EIO instead of EINTR when there is a
soft timeout or force unmount in progress.
hangs due to recent preemption changes. This change appears to remove
the panic that I was running into, but at the cost of increasing
ithread scheduling latency, and as such is a temporary band-aid until
jhb has a chance to resolve the ule<->preemption interaction that is
the source of the problem. If it doesn't fix the problem for others--
sorry!
so that last_work_seen has a reasonable value at the transition
to the SYNCER_SHUTTING_DOWN state, even if net_worklist_len happened
to be zero at the time.
Initialize last_work_seen to zero as a safety measure in case the
syncer never ran in the SYNCER_RUNNING state.
Tested by: phk
Speed up the syncer when shutting down by sleeping for a shorter
period of time instead of cranking up rushjob and using the
normal one second sleep.
Skip empty worklist slots when shutting down to avoid lengthy
intervals of inactivity.
Give I/O more time to complete between steps by not speeding the
syncer quite as much.
Terminate the syncer after one full pass through the worklist
plus one second with the worklist containing nothing but syncer
vnodes.
Print an indication of shutdown progress to the console.
Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist
to be monitored.
around in the vnodes surroundings when we allocate a block.
Assign a blocksize when we create a vnode, and yell a warning (and ignore it)
if we got the wrong size.
Please email all such warnings to me.
generic filesystem events to userspace. Currently only mount and unmount
of filesystems are signalled. Soon to be added, up/down status of NFS.
Introduce a sysctl node used to route requests to/from filesystems
based on filesystem ids.
Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/
entrypoint by the sysctl code to change individual filesystems.
ffs_mount -> bdevvp -> getnewvnode(..., mp = NULL, ...) ->
insmntqueue(vp, mp = NULL) -> KASSERT -> panic
Make getnewvnode() only call insmntqueue() if the mountpoint parameter
is not NULL.
our cached 'next vnode' being removed from this mountpoint. If we
find that it was recycled, we restart our traversal from the start
of the list.
Code to do that is in all local disk filesystems (and a few other
places) and looks roughly like this:
MNT_ILOCK(mp);
loop:
for (vp = TAILQ_FIRST(&mp...);
(vp = nvp) != NULL;
nvp = TAILQ_NEXT(vp,...)) {
if (vp->v_mount != mp)
goto loop;
MNT_IUNLOCK(mp);
...
MNT_ILOCK(mp);
}
MNT_IUNLOCK(mp);
The code which takes vnodes off a mountpoint looks like this:
MNT_ILOCK(vp->v_mount);
...
TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes);
...
MNT_IUNLOCK(vp->v_mount);
...
vp->v_mount = something;
(Take a moment and try to spot the locking error before you read on.)
On a SMP system, one CPU could have removed nvp from our mountlist
but not yet gotten to assign a new value to vp->v_mount while another
CPU simultaneously get to the top of the traversal loop where it
finds that (vp->v_mount != mp) is not true despite the fact that
the vnode has indeed been removed from our mountpoint.
Fix:
Introduce the macro MNT_VNODE_FOREACH() to traverse the list of
vnodes on a mountpoint while taking into account that vnodes may
be removed from the list as we go. This saves approx 65 lines of
duplicated code.
Split the insmntque() which potentially moves a vnode from one mount
point to another into delmntque() and insmntque() which does just
what the names say.
Fix delmntque() to set vp->v_mount to NULL while holding the
mountpoint lock.
introduced a KSE_CAN_MIGRATE() invocation with one argument
missing (class). Either this is a genuine forget or it crept
in from JHB's repo where he may have modified it. If it's
the latter then it may require more attention. For now fix
the make depend.
than as one-off hacks in various other parts of the kernel:
- Add a function maybe_preempt() that is called from sched_add() to
determine if a thread about to be added to a run queue should be
preempted to directly. If it is not safe to preempt or if the new
thread does not have a high enough priority, then the function returns
false and sched_add() adds the thread to the run queue. If the thread
should be preempted to but the current thread is in a nested critical
section, then the flag TDF_OWEPREEMPT is set and the thread is added
to the run queue. Otherwise, mi_switch() is called immediately and the
thread is never added to the run queue since it is switch to directly.
When exiting an outermost critical section, if TDF_OWEPREEMPT is set,
then clear it and call mi_switch() to perform the deferred preemption.
- Remove explicit preemption from ithread_schedule() as calling
setrunqueue() now does all the correct work. This also removes the
do_switch argument from ithread_schedule().
- Do not use the manual preemption code in mtx_unlock if the architecture
supports native preemption.
- Don't call mi_switch() in a loop during shutdown to give ithreads a
chance to run if the architecture supports native preemption since
the ithreads will just preempt DELAY().
- Don't call mi_switch() from the page zeroing idle thread for
architectures that support native preemption as it is unnecessary.
- Native preemption is enabled on the same archs that supported ithread
preemption, namely alpha, i386, and amd64.
This change should largely be a NOP for the default case as committed
except that we will do fewer context switches in a few cases and will
avoid the run queues completely when preempting.
Approved by: scottl (with his re@ hat)
switch to. If a non-NULL thread pointer is passed in, then the CPU will
switch to that thread directly rather than calling choosethread() to pick
a thread to choose to.
- Make sched_switch() aware of idle threads and know to do
TD_SET_CAN_RUN() instead of sticking them on the run queue rather than
requiring all callers of mi_switch() to know to do this if they can be
called from an idlethread.
- Move constants for arguments to mi_switch() and thread_single() out of
the middle of the function prototypes and up above into their own
section.
lock and sched_lock so they can be read with either lock held. Document
the locking as well. The one remaining bogosity is that pr_addr and
pr_ticks should be per-thread but profiling of multithreaded apps is
currently undefined.
stats structure and a vmspace as this should always be true rather
than checking the always true condition in an if statement.
- Remove never-false check: if ((ru = &pstats->p_ru) != NULL)
- Remove pstats variable that is only used once and inline its one use
instead.
pointer to the corresponding struct thread to the thread ID (lwpid_t)
assigned to that thread. The primary reason for this change is that
libthr now internally uses the same ID as the debugger and the kernel
when referencing to a kernel thread. This allows us to implement the
support for debugging without additional translations and/or mappings.
To preserve the ABI, the 1:1 threading syscalls, including the umtx
locking API have not been changed to work on a lwpid_t. Instead the
1:1 threading syscalls operate on long and the umtx locking API has
not been changed except for the contested bit. Previously this was
the least significant bit. Now it's the most significant bit. Since
the contested bit should not be tested by userland, this change is
not expected to be visible. Just to be sure, UMTX_CONTESTED has been
removed from <sys/umtx.h>.
Reviewed by: mtm@
ABI preservation tested on: i386, ia64
faster and iterate to over its work list a few times in an attempt
to empty the work list before the syncer terminates. This leaves
fewer dirty blocks to be written at the "syncing disks" stage and
keeps the the "giving up on N buffers" problem from being triggered
by the presence of a large soft updates work list at system shutdown
time. The downside is that the syncer takes noticeably longer to
terminate.
Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com>
Approved by: mckusick
devremoved events. This reduces the races around these events. We
now include the pnp info in both. This lets one do more interesting
thigns with devd on device insertion.
Submitted by: Bernd Walter
creation of the sysctl tree for the turnstile profiling stats until a
SI_SUB_LOCK sysinit. Doing it in init_turnstiles() is too early as it is
called before mi_startup().
hash tables used in the sleep queue and turnstile code. Each option adds
a sysctl tree under debug containing the maximum depth of any bucket in
the hash table as well as a separate node for each bucket (or chain)
containing the current depth and maximum depth for that bucket.
