Commit Graph

43 Commits

Author SHA1 Message Date
Pedro F. Giffuni
1de7b4b805 various: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:37:16 +00:00
Bryan Drewery
ea825d0274 DIRDEPS_BUILD: Update dependencies.
Sponsored by:	Dell EMC Isilon
2017-10-31 00:07:04 +00:00
Enji Cooper
64a0982bee usr.sbin: normalize paths using SRCTOP-relative paths or :H when possible
This simplifies make logic/output

MFC after:	1 month
Sponsored by:	Dell EMC Isilon
2017-03-04 11:38:03 +00:00
Michael Tuexen
ab51358e76 Fix typo.
MFC after: 1 month
Sponsored by: Netflix
2016-11-13 17:55:27 +00:00
Glen Barber
79119a977d MFH
Sponsored by:	The FreeBSD Foundation
2016-01-12 14:33:17 +00:00
Christian Brueffer
799d68c024 Add a basic bhyvectl manpage.
Reviewed by:	neel
MFC after:	2 weeks
2016-01-12 10:16:15 +00:00
Glen Barber
b626f5a73a MFH r289384-r293170
Sponsored by:	The FreeBSD Foundation
2016-01-04 19:19:48 +00:00
Bryan Drewery
b1f92fa229 META MODE: Update dependencies with 'the-lot' and add missing directories.
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so.  A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR.  These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package.  The current implementation of targets/ is
very unmaintainable.

Currently rescue/rescue and sys/modules are still not connected.

Sponsored by:	EMC / Isilon Storage Division
2015-12-01 05:23:19 +00:00
Baptiste Daroussin
b5ff185e19 Merge from head 2015-09-12 11:41:31 +00:00
Marcelo Araujo
68c32d3559 Remove duplicate header string.h. 2015-07-04 18:36:02 +00:00
Baptiste Daroussin
2fbd60ec47 Merge from head @274131 2015-06-20 00:58:46 +00:00
Neel Natu
9b1aa8d622 Restructure memory allocation in bhyve to support "devmem".
devmem is used to represent MMIO devices like the boot ROM or a VESA framebuffer
where doing a trap-and-emulate for every access is impractical. devmem is a
hybrid of system memory (sysmem) and emulated device models.

devmem is mapped in the guest address space via nested page tables similar
to sysmem. However the address range where devmem is mapped may be changed
by the guest at runtime (e.g. by reprogramming a PCI BAR). Also devmem is
usually mapped RO or RW as compared to RWX mappings for sysmem.

Each devmem segment is named (e.g. "bootrom") and this name is used to
create a device node for the devmem segment (e.g. /dev/vmm/testvm.bootrom).
The device node supports mmap(2) and this decouples the host mapping of
devmem from its mapping in the guest address space (which can change).

Reviewed by:	tychon
Discussed with:	grehan
Differential Revision:	https://reviews.freebsd.org/D2762
MFC after:	4 weeks
2015-06-18 06:00:17 +00:00
Glen Barber
37a48d408f MFH: r282615-r283655
Sponsored by:	The FreeBSD Foundation
2015-05-28 17:06:50 +00:00
Neel Natu
4b083d80bf Add an option "--get-vmcs-exit-inst-length" to display the instruction length
of the instruction that caused the VM-exit.

MFC after:	1 week
2015-05-21 18:29:11 +00:00
Baptiste Daroussin
7757a1b4dc Merge from head 2015-05-03 19:30:11 +00:00
Neel Natu
22fc8b974d Initialize 'error' before use.
Reported by:	Coverity Scan
CID:		1249748, 1249747, 1249751, 1249749
MFC after:	1 week
2015-04-15 05:04:42 +00:00
Baptiste Daroussin
5d0b9042a1 bhyvectl does not need to link to libutil 2015-04-09 21:39:58 +00:00
Baptiste Daroussin
c2e2d02cbe Make FreeBSD-bhyve an indivual package 2015-03-05 07:30:48 +00:00
Neel Natu
d087a39935 Simplify instruction restart logic in bhyve.
Keep track of the next instruction to be executed by the vcpu as 'nextrip'.
As a result the VM_RUN ioctl no longer takes the %rip where a vcpu should
start execution.

Also, instruction restart happens implicitly via 'vm_inject_exception()' or
explicitly via 'vm_restart_instruction()'. The APIs behave identically in
both kernel and userspace contexts. The main beneficiary is the instruction
emulation code that executes in both contexts.

bhyve(8) VM exit handlers now treat 'vmexit->rip' and 'vmexit->inst_length'
as readonly:
- Restarting an instruction is now done by calling 'vm_restart_instruction()'
  as opposed to setting 'vmexit->inst_length' to 0 (e.g. emulate_inout())
- Resuming vcpu at an arbitrary %rip is now done by setting VM_REG_GUEST_RIP
  as opposed to changing 'vmexit->rip' (e.g. vmexit_task_switch())

Differential Revision:	https://reviews.freebsd.org/D1526
Reviewed by:		grehan
MFC after:		2 weeks
2015-01-18 03:08:30 +00:00
Neel Natu
0dafa5cd4b Replace bhyve's minimal RTC emulation with a fully featured one in vmm.ko.
The new RTC emulation supports all interrupt modes: periodic, update ended
and alarm. It is also capable of maintaining the date/time and NVRAM contents
across virtual machine reset. Also, the date/time fields can now be modified
by the guest.

Since bhyve now emulates both the PIT and the RTC there is no need for
"Legacy Replacement Routing" in the HPET so get rid of it.

The RTC device state can be inspected via bhyvectl as follows:
bhyvectl --vm=vm --get-rtc-time
bhyvectl --vm=vm --set-rtc-time=<unix_time_secs>
bhyvectl --vm=vm --rtc-nvram-offset=<offset> --get-rtc-nvram
bhyvectl --vm=vm --rtc-nvram-offset=<offset> --set-rtc-nvram=<value>

Reviewed by:	tychon
Discussed with:	grehan
Differential Revision:	https://reviews.freebsd.org/D1385
MFC after:	2 weeks
2014-12-30 22:19:34 +00:00
Baptiste Daroussin
c6db8143ed Convert usr.sbin to LIBADD
Reduce overlinking
2014-11-25 16:57:27 +00:00
Neel Natu
faba66190e Fix bhyvectl so it works correctly on AMD/SVM hosts. Also, add command line
options to display some key VMCB fields.

The set of valid options that can be passed to bhyvectl now depends on the
processor type. AMD-specific options are identified by a "--vmcb" or "--avic"
in the option name. Intel-specific options are identified by a "--vmcs" in
the option name.

Submitted by:	Anish Gupta (akgupt3@gmail.com)
2014-10-10 21:48:59 +00:00
Neel Natu
d3e19acf3d After r271635 mmap(2) requires either MAP_PRIVATE or MAP_SHARED
for non-anonymous mappings.

This gets 'bhyvectl --get-all' working again.

Reported by:	Anish Gupta (akgupt3@gmail.com)
2014-09-27 03:43:49 +00:00
Neel Natu
091d453222 Handle nested exceptions in bhyve.
A nested exception condition arises when a second exception is triggered while
delivering the first exception. Most nested exceptions can be handled serially
but some are converted into a double fault. If an exception is generated during
delivery of a double fault then the virtual machine shuts down as a result of
a triple fault.

vm_exit_intinfo() is used to record that a VM-exit happened while an event was
being delivered through the IDT. If an exception is triggered while handling
the VM-exit it will be treated like a nested exception.

vm_entry_intinfo() is used by processor-specific code to get the event to be
injected into the guest on the next VM-entry. This function is responsible for
deciding the disposition of nested exceptions.
2014-07-19 20:59:08 +00:00
Neel Natu
95ebc360ef Activate vcpus from bhyve(8) using the ioctl VM_ACTIVATE_CPU instead of doing
it implicitly in vmm.ko.

Add ioctl VM_GET_CPUS to get the current set of 'active' and 'suspended' cpus
and display them via /usr/sbin/bhyvectl using the "--get-active-cpus" and
"--get-suspended-cpus" options.

This is in preparation for being able to reset virtual machine state without
having to destroy and recreate it.
2014-05-31 23:37:34 +00:00
Neel Natu
f0fdcfe247 Allow a virtual machine to be forcibly reset or powered off. This is done
by adding an argument to the VM_SUSPEND ioctl that specifies how the virtual
machine should be suspended, viz. VM_SUSPEND_RESET or VM_SUSPEND_POWEROFF.

The disposition of VM_SUSPEND is also made available to the exit handler
via the 'u.suspended' member of 'struct vm_exit'.

This capability is exposed via the '--force-reset' and '--force-poweroff'
arguments to /usr/sbin/bhyvectl.

Discussed with:	grehan@
2014-04-28 22:06:40 +00:00
Warner Losh
3bdf775801 NO_MAN= has been deprecated in favor of MAN= for some time, go ahead
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
2014-04-13 05:21:56 +00:00
John Baldwin
96c2ac37d3 Explicitly initialize 'vmname' to NULL.
Reviewed by:	grehan
2014-04-08 20:54:13 +00:00
Neel Natu
27ff748ea1 Fix amd64 build breakage caused by r260532.
Submitted by:	Marcus Karlsson (mk@acc.umu.se)
Pointy hat to:	me
2014-01-11 17:37:53 +00:00
Neel Natu
0492757c70 Restructure the VMX code to enter and exit the guest. In large part this change
hides the setjmp/longjmp semantics of VM enter/exit. vmx_enter_guest() is used
to enter guest context and vmx_exit_guest() is used to transition back into
host context.

Fix a longstanding race where a vcpu interrupt notification might be ignored
if it happens after vmx_inject_interrupts() but before host interrupts are
disabled in vmx_resume/vmx_launch. We now called vmx_inject_interrupts() with
host interrupts disabled to prevent this.

Suggested by:	grehan@
2014-01-01 21:17:08 +00:00
John Baldwin
330baf58c6 Extend the support for local interrupts on the local APIC:
- Add a generic routine to trigger an LVT interrupt that supports both
  fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
  guest.  In particular, a global NMI similar to that raised by SERR# or
  PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
  report them via ESR when ESR is written to.  Add support for asserting
  the error LVT when an error occurs.  Raise illegal vector errors when
  attempting to signal an invalid vector for an interrupt or when sending
  an IPI.
- Ignore writes to reserved bits in LVT entries.
- Export table entries the MADT and MP Table advertising the stock x86
  config of LINT0 set to ExtInt and LINT1 wired to NMI.

Reviewed by:	neel (earlier version)
2013-12-23 19:29:07 +00:00
John Baldwin
eba633a62f Add a command to inject an NMI on a specific vcpu. It is a simple
wrapper around the existing vm_inject_nmi().

Reviewed by:	grehan, neel
2013-12-12 20:34:04 +00:00
Neel Natu
49cc03da31 Add a new capability, VM_CAP_ENABLE_INVPCID, that can be enabled to expose
'invpcid' instruction to the guest. Currently bhyve will try to enable this
capability unconditionally if it is available.

Consolidate code in bhyve to set the capabilities so it is no longer
duplicated in BSP and AP bringup.

Add a sysctl 'vm.pmap.invpcid_works' to display whether the 'invpcid'
instruction is available.

Reviewed by:	grehan
MFC after:	3 days
2013-10-16 18:20:27 +00:00
Neel Natu
200758f114 Parse the memory size parameter using expand_number() to allow specifying
the memory size more intuitively (e.g. 512M, 4G etc).

Submitted by:	rodrigc
Reviewed by:	grehan
Approved by:	re (blanket)
2013-10-09 03:56:07 +00:00
Neel Natu
318224bbe6 Merge projects/bhyve_npt_pmap into head.
Make the amd64/pmap code aware of nested page table mappings used by bhyve
guests. This allows bhyve to associate each guest with its own vmspace and
deal with nested page faults in the context of that vmspace. This also
enables features like accessed/dirty bit tracking, swapping to disk and
transparent superpage promotions of guest memory.

Guest vmspace:
Each bhyve guest has a unique vmspace to represent the physical memory
allocated to the guest. Each memory segment allocated by the guest is
mapped into the guest's address space via the 'vmspace->vm_map' and is
backed by an object of type OBJT_DEFAULT.

pmap types:
The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT.

The PT_X86 pmap type is used by the vmspace associated with the host kernel
as well as user processes executing on the host. The PT_EPT pmap is used by
the vmspace associated with a bhyve guest.

Page Table Entries:
The EPT page table entries as mostly similar in functionality to regular
page table entries although there are some differences in terms of what
bits are used to express that functionality. For e.g. the dirty bit is
represented by bit 9 in the nested PTE as opposed to bit 6 in the regular
x86 PTE. Therefore the bitmask representing the dirty bit is now computed
at runtime based on the type of the pmap. Thus PG_M that was previously a
macro now becomes a local variable that is initialized at runtime using
'pmap_modified_bit(pmap)'.

An additional wrinkle associated with EPT mappings is that older Intel
processors don't have hardware support for tracking accessed/dirty bits in
the PTE. This means that the amd64/pmap code needs to emulate these bits to
provide proper accounting to the VM subsystem. This is achieved by using
the following mapping for EPT entries that need emulation of A/D bits:
               Bit Position           Interpreted By
PG_V               52                 software (accessed bit emulation handler)
PG_RW              53                 software (dirty bit emulation handler)
PG_A               0                  hardware (aka EPT_PG_RD)
PG_M               1                  hardware (aka EPT_PG_WR)

The idea to use the mapping listed above for A/D bit emulation came from
Alan Cox (alc@).

The final difference with respect to x86 PTEs is that some EPT implementations
do not support superpage mappings. This is recorded in the 'pm_flags' field
of the pmap.

TLB invalidation:
The amd64/pmap code has a number of ways to do invalidation of mappings
that may be cached in the TLB: single page, multiple pages in a range or the
entire TLB. All of these funnel into a single EPT invalidation routine called
'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and
sends an IPI to the host cpus that are executing the guest's vcpus. On a
subsequent entry into the guest it will detect that the EPT has changed and
invalidate the mappings from the TLB.

Guest memory access:
Since the guest memory is no longer wired we need to hold the host physical
page that backs the guest physical page before we can access it. The helper
functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose.

PCI passthru:
Guest's with PCI passthru devices will wire the entire guest physical address
space. The MMIO BAR associated with the passthru device is backed by a
vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that
have one or more PCI passthru devices attached to them.

Limitations:
There isn't a way to map a guest physical page without execute permissions.
This is because the amd64/pmap code interprets the guest physical mappings as
user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U
shares the same bit position as EPT_PG_EXECUTE all guest mappings become
automatically executable.

Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews
as well as their support and encouragement.

Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing
object for pci passthru mmio regions.

Special thanks to Peter Holm for testing the patch on short notice.

Approved by:	re
Discussed with:	grehan
Reviewed by:	alc, kib
Tested by:	pho
2013-10-05 21:22:35 +00:00
Neel Natu
b5aaf7b22b Add some more stats to keep track of all the reasons that a vcpu is exiting. 2013-03-30 17:46:03 +00:00
Neel Natu
b060ba5024 Simplify the assignment of memory to virtual machines by requiring a single
command line option "-m <memsize in MB>" to specify the memory size.

Prior to this change the user needed to explicitly specify the amount of
memory allocated below 4G (-m <lowmem>) and the amount above 4G (-M <highmem>).

The "-M" option is no longer supported by 'bhyveload' and 'bhyve'.

The start of the PCI hole is fixed at 3GB and cannot be directly changed
using command line options. However it is still possible to change this in
special circumstances via the 'vm_set_lowmem_limit()' API provided by
libvmmapi.

Submitted by:	Dinakar Medavaram (initial version)
Reviewed by:	grehan
Obtained from:	NetApp
2013-03-18 22:38:30 +00:00
Neel Natu
a58ed3e913 Add option "--unassign-pptdev=<bus/slot/func>" to allow 'bhyvectl' to detach
passthru devices from the guest.

Obtained from:	NetApp
2013-02-14 18:41:12 +00:00
Neel Natu
485b3300cc Implement guest vcpu pinning using 'pthread_setaffinity_np(3)'.
Prior to this change pinning was implemented via an ioctl (VM_SET_PINNING)
that called 'sched_bind()' on behalf of the user thread.

The ULE implementation of 'sched_bind()' bumps up 'td_pinned' which in turn
runs afoul of the assertion '(td_pinned == 0)' in userret().

Using the cpuset affinity to implement pinning of the vcpu threads works with
both 4BSD and ULE schedulers and has the happy side-effect of getting rid
of a bunch of code in vmm.ko.

Discussed with:	grehan
2013-02-11 20:36:07 +00:00
Joel Dahl
9c17a1c7fe Fix minor nit in usage output.
Reviewed by:	neel
2013-01-20 08:18:56 +00:00
Neel Natu
24be8623c6 Use <vmname> in a consistent manner in usage messages output by 'bhyve',
'bhyveload' and 'bhyvectl'.

Pointed out by:	joel@
2013-01-20 03:47:13 +00:00
Neel Natu
c83f77500c Get rid of 'sample.sh' from here - it belongs in the /usr/share/examples
directory.

Obtained from:	NetApp
2013-01-09 04:04:30 +00:00
Peter Grehan
bd8cef91ea Rename vmmctl to bhyvectl. 'vmmctl' came from a pre-bhyve
internal codebase at NetApp. No need for it to have an
unrelated name to the other userspace utils.

Reviewed by:	neel
Obtained from:	NetApp
2012-10-27 02:10:45 +00:00