Commit Graph

143 Commits

Author SHA1 Message Date
Pedro F. Giffuni
1de7b4b805 various: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:37:16 +00:00
Ed Maste
82edb108da vidcontrol: correct history size error message
`vidcontrol -h 0` is acceptable, so be explicit that it's less than zero
that is not allowed.

Reported by:	Siva Mahadevan
Sponsored by:	The FreeBSD Foundation
2017-11-21 13:55:10 +00:00
Bryan Drewery
ea825d0274 DIRDEPS_BUILD: Update dependencies.
Sponsored by:	Dell EMC Isilon
2017-10-31 00:07:04 +00:00
Bruce Evans
9bc7c36337 Support setting the colors of cursors for the VGA renderer.
Advertise this by changing the defaults to mostly red.  If you don't like
this, change them (almost) back using:
   vidcontrol -c charcolors,base=7,height=0
   vidcontrol -c mousecolors,base=0[,height=15]

The (graphics mode only) mouse cursor colors were hard-coded to a black
border and lightwhite interior.  Black for the border is the worst
possible default, since it is the same as the default black background
and not good for any dark background.  Reversing this gives the better
default of X Windows.  Coloring everything works better still.  Now
the coloring defaults to a lightwhite border and red interior.

Coloring for the character cursor is more complicated and mode
dependent.  The new coloring doesn't apply for hardware cursors.  For
non-block cursors, it only applies in graphics mode.  In text mode,
the cursor color was usually a hard-coded (dull)white for the background
only, unless the foreground was white when it was a hard-coded black
for the background only, unless the foreground was white and the
background was black it was reverse video.  In graphics mode, it was
always reverse video for the block cursor.  Reverse video is worse,
especially over cutmarking regions, since cutmarking still uses simple
reverse video (nothing better is possible in text mode) and double
reverse video for the cursor gives normal video.  Now, graphics mode
uses the same algorithm as the best case for text mode in all cases
for graphics mode.  The hard-coded sequence { white, black, } for the
background is now { red, white, blue, } where the first 2 colors can
be configured.  The blue color at the end is a sentinel which prevents
reverse video being used in most cases but breaks the compatibility
setting for white on black and black on white characters.  This will
be fixed later.  The compatibility setting is most needed for mono modes.

The previous commit to syscons.c changed sc_cnterm() to be more careful.
It followed null pointers in some cases.  But sc_cnterm() has been
unreachable for 15+ years since changes for multiple consoles turned
off calls to the the cnterm destructor for all console drivers.  Before
them, it was only called at boot time.  So no driver with an attached
console has ever been unloadable and not even the non-console destructors
have been tested much.
2017-08-25 07:04:41 +00:00
Bruce Evans
dd51fceb15 Reduce complexity and backwards compatibilty a little by removing new aliases
and repurposing "blink".  Improve accuracy of documentation of historical
mistakes and other bugs.

"blink" now means "set the blink attribute for the target(s)" instead of
"set the blink attribute and clear other attributes [and control flags]".
It was even more confusing to use "blinking" for the single attribute to
keep the old meaning for "blink".

"destructive" is not as historically broken or gone as the previous version
said.

The bugs involving resetting from defaults are now understood and partly
documented (the defaults are mis-initialized).
2017-08-19 12:14:46 +00:00
Bruce Evans
eb4fa1ad8c I misplaced a newline in the previous commit. Fix this, and move line
breaks in the vt case to the same places that the man(1) puts then in
the SYNOPSIS.  This was already done for the syscons case.  Man pages
can't depend on the driver, and the SYNOPSIS is hard-coded for syscons
except for -f where it is hard-coded for vt.  The usage message reverses
this for sc.  The only other differences are whitespace and removing
-[dL] and -l for vt.
2017-08-17 20:25:50 +00:00
Bruce Evans
92dedf1b1b Update vidcontrol -c to support all cursor appearance setting
capabilities.

Most of the capabilities (all of the arcane ones) were in FreeBSD-2.0.5,
but were harder to use then, and vidcontrol didn't try.  FreeBSD-4.1.0
added per-vty support, fixed the destructivness of the "destructive"
cursor, and improved APIs.  Start using the new APIs, support all of
their capabilities, and document all of the capabilities and some of
the historical mistakes.

vt doesn't support any of this before or after the change.

Fix minor unrelated bitrot in the usage message for the syscons case.
2017-08-17 18:08:45 +00:00
Bruce Evans
03096857fd Fix setting of the border color. Teken doesn't support syscons' escape
sequence "ESC [ %d A" for this although that was used here.  I will fix
teken later, but use the more portable ioctl KDSBORDER here.

The ioctl is also much easier to use if you check that it works.  For
-b, check it and complain and exit if it failed, so that it is more
obvious that that vt doesn't support border colors.  Don't check it
when restoring the border color in revert(), since revert() is used
on vt for handling other errors.

Fix nearby error handling and style.  For the error of an invalid
color, revert() and print a specific error message using err() instead
of not revert()ing and printing spam using usage().
2017-08-16 15:14:46 +00:00
Bruce Evans
6be33b8301 Fix a missing const in my previous commit which broke the build at
normal WARNS.

Reported by:	lwhsu
2017-04-03 15:11:28 +00:00
Bruce Evans
b60e1b8142 Show high (blinking foreground/bright background) background colors. Format
output and source better for this.  Format output for 40 columns if there
are less than 80 columns.
2017-04-03 13:06:28 +00:00
Bruce Evans
8f92a81b81 Remove the global variable 'info' and fix associated bugs and style bugs.
This variable was used 4 times in 1 function and all uses were wrong.
The 4 uses were in he test_frame() (show) function, to try to restore
4 colors, 2 unnecessarily and these 2 now broken.  This was wrong
because it is the previous colors that must be restored, but the global
holds the original colors.  Excessive setting of colors at the end
restored the previous colors correctly in most cases, but I removed
this a couple of revisions ago.

Originally, this variable had 1 correct use, to test for being on a vty
as a side effect of initializing it.  This is now down in init(), and
init() also leaves a better-named global with the same contents.

Fix this by reading the current console info into a local variable in
test_frame(), as is done for several other functions.  Fix style bugs
in this reading for all callers:
- extra blank lines
- all error messages different.  The first one now in init() is not as
  specific as the old one, but it is after a different specific one for
  another ioctl and is unlikely to be reached when the first ioctl
  succeeds.  Ones after the first are to repeat the ioctl, so are even
  more likely to be reached.  The correctness of full removal of the
  old global depends on the error handling for failure to initialize
  it being unreachable.
- err() instead of warn() for failure in load_font().  This is almost
  unreachable, and it makes no sense to continue after undoing previous
  changes with revert().
- unreachable return after err() for failure in dump_screen().

Undo large renaming of local variables from the good name 'info' to the
bad name _info, which was done to protect the buggy global's bad name
from -Wshadow warnings.
2017-04-03 10:47:01 +00:00
Bruce Evans
2b881cf4c6 Save errno across revert().
Change 25 uses of errc() to err().  2 of these were correct.  23 used
errno for the arg so were just a verbose spelling of err().  5 of these
were just style bugs, and 18 depended on revert() saving errno.

1 warn() also depended on revert() saving errno.

Remove 2 warnx()'s that duplicate the message from a later errx().
These used to be before returns, and should have reported errno in
some cases.  errno is also not reported for for openguess() failures.

Only "restore" the video mode in revert() if the mode was just set
(necessarily partially).  Setting the mode to its current setting
doesn't "restore" it, but resets it, with the least harmful change
being to clear the screen.  revert() is called even for some harmless
syntax errors and usually did nothing except reset the mode.  Now it
usually does nothing.  The only things that it tries to restore apart
from the mode are the active vty number, the screen map, 2 colors that
only need to be restored (only after a mode change) to fix kernel bugs,
and 3 colors that can't be restored due to kernel bugs.  (This is
mostly for sc, since vt doesn't support mode changes.)

revert() is not called for syntax and setting errors after [mode], so
the mode reset is only done for failures to set raster mode after
setting graphics mode.  normal colors can only be set after [mode],
and that is why reverting them should be unnecessary.
2017-04-03 09:21:00 +00:00
Bruce Evans
1b8c842e06 Fix some parsing and error handling bugs.
r146736 added an undocumented syntax and many bugs handling it.  The
documented syntax is "... [mode] [fg [bg]] [show]", where it is critical
for reducing ambiguity and keeping things simple that the mode is
parsed first.  r146736 added buggy support for "... [mode] [fg [bg]]
[show] [mode] [fg [bg]]".  One error was that after for failing to set
a partially-supported graphics mode, argv[optind] remains pointing to
the mode so doesn't match the first [fg [bg]], so the setting is
attempted again, with slightly worse error handling.

Fix this by removing it (support for the trailing '[mode] [fg [bg]]')
and cleaning up.  The cleanups are mostly to remove convolutions and
bugs that didn't work to handle the ambiguous syntax '[fg [bg]] [fg [bg]]'
when [mode] and [show] are not present.  Globals were set to allow
repeating the color settings at the end.  The functions that set the
colors earlier were misnamed from set* to get*.  All that they "got" is
is settings from argv.  They applied the settings to the kernel and
the globals.

Fix restoration of colors in revert() by restoring 2 after the mode
change.  Colors should not need to be restored, but a bug in scteken
clobbers them on any mode change, including ones for restoration.  Don't
move the restoration of the other 3.  Teken doesn't clobber them on
mode changes because it doesn't support them at all (sc still supports
the border color, but only using a non-teken ioctl).

Add restoration of colors after a successful mode change to work around
the scteken bug there too.  The bug was previously masked by the general
setting of colors at the end.

Fix a longstanding parsing/error handling bug by exiting almost immediately
after matching the [mode] arg but failing to set the mode.  Just revert
if necessary.  Don't return to continue parsing but do it wrong.  This
bug caused spamming the output with a usage() message and exiting with
status 1 whenever [mode] is not present bug [fg [bg]] or [show].  The
exit code 1 was actualy an ambiguous internal code for failure to match
[mode] or failure to set [mode].  This 1 was obfuscated by spelling it
EXIT_FAILURE, but actual exit codes spell EXIT_FAILURE as 1.  Remove
another global which could have been used to disambiguate this but was
only used to micro-optimize the (unnecessary except for other bugs)
setting of colors at the end.
2017-04-03 06:52:02 +00:00
Bruce Evans
12dd1cd388 Remove checks that background (bg) colors are not bright and buggy
attempts to keep them that way.  The bg brightness bit is interpreted
as blinking in some modes, but it would barely be useful to disallow
setting it when it would give blinking in code which knew when that
is.  The old code mostly knew this wrong, and added handling errors.
It is in fact impossible to know, since future mode switches may
change the meaning of the bit many times on the screen and in history.

Old versions of vidcontrol disallowed bg color numbers >= 8 in all
cases.  This is very VGA/syscons-centric.  Syscons uses the VGA defaults
of blinking fg instead of bright bg in text mode and bright bg in
graphics mode.  On VGA, this is very easy to toggle at any time, and
vt blows away the VGA text mode default at boot time.

r146736 changed this to try to allow bg color numbers in graphics mode
only.  This is even more VGA/syscons-centric, and there are many bugs
in this, and many nearby bugs in the parser.  These are increased or
decreased by differences and bugs in vt and teken.

Perhaps the most obvious bug was that almost any vidcontrol command
which changes any color or the mode causes an error if the initial fg
color is bright.  E.g., in syscons text mode, after "vidcontrol
lightwhite" to make the fg bright, another "vidcontrol lightwhite" is
rejected and buggy fixup code changes the fg to white.  This is because
the bright fg color creates a bright bg color for the phantom reverse
video attribute, so was rejected.  (The reverse video attribute is
phantom because teken ignores the user's setting of it and simply
reverses the fg attributes to create the bg attributes.  Sometimes
some layer masks off the brightness/blinking bit, but not here.)

Perhaps the next most obvious one was that "vidcontrol lightgreen
lightblue" was misparsed as 2 settings of the fg instead of 1 setting
of the fg and 1 invalid setting of the bg.  This is because the
parser supports an undocumented syntax with many parsing bugs (an
ambiguity gives this one).

I recently fix bugs in teken that broke setting of bright fg's and
bg's in the normal way.  This gave more settings of then, so the old
bugs showed up more often.
2017-04-02 16:39:39 +00:00
Yoshihiro Takahashi
2b375b4edd Remove pc98 support completely.
I thank all developers and contributors for pc98.

Relnotes:	yes
2017-01-28 02:22:15 +00:00
Ed Maste
becf2d11e8 vidcontrol: use calloc where appropriate
Reported by:	kib
2016-11-05 11:19:55 +00:00
Ed Maste
aba6e41495 vidcontrol: improve error handling in vt(4) font loading
PR:		209078
Reported by:	ecturt@gmail.com
Reviewed by:	Oliver Pinter
Differential Revision:	https://reviews.freebsd.org/D8176
2016-11-04 20:32:49 +00:00
Edward Tomasz Napierala
449d10e56e Add "vidcontrol -i active", to print out active vty number,
to be used with eg "vidcontrol -s".

Reviewed by:	emaste@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D4968
2016-01-19 13:09:20 +00:00
Simon J. Gerraty
ccfb965433 Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00
Simon J. Gerraty
44d314f704 dirdeps.mk now sets DEP_RELDIR 2015-06-08 23:35:17 +00:00
Simon J. Gerraty
98e0ffaefb Merge sync of head 2015-05-27 01:19:58 +00:00
Ed Maste
16028f6a5a vidcontrol: skip invalid video modes returned by vt(4)
vt(4) has a stub CONS_MODEINFO ioctl that does not provide any data
but returns success. This needs to be fixed in the kernel, but address
it in vidcontrol(1) as well in case it's run on an older kernel.

Reviewed by:	bde
Sponsored by:	The FreeBSD Foundation
2015-04-20 17:43:55 +00:00
Ed Maste
bbfcc42e41 vidcontrol: make size argument optional again for syscons
r273544 changed the -f option allow no arguments in vt mode (used to
reset the font back to the default), but broke the optionality of the
size argument for syscons. Drop the required argument from syscons'
optstring for -f so the optional argument handler works the same way
for both syscons and vt.

Reported by:	bde
Sponsored by:	The FreeBSD Foundation
2015-04-16 01:47:05 +00:00
Simon J. Gerraty
9268022b74 Merge from head@274682 2014-11-19 01:07:58 +00:00
Jean-Sébastien Pédron
069f1c256a vt(4): Add PIO_VFONT_DEFAULT ioctl to restore the default builtin font
To restore the default font using vidcontrol(1), use the "-f" flag
without an argument:
    vidcontrol -f < /dev/ttyv0

PR:		193910
Differential Revision:	https://reviews.freebsd.org/D971
Submitted by:	Marcin Cieslak <saper@saper.info>
Reviewed by:	ray@, emaste@
Approved by:	ray@
MFC after:	1 week
2014-10-23 12:38:05 +00:00
Stefan Eßer
320098549a Add references to vt(4) to further man-pages.
MFC after:	3 days
2014-09-01 16:25:08 +00:00
Simon J. Gerraty
ee7b0571c2 Merge head from 7/28 2014-08-19 06:50:54 +00:00
Ed Maste
6c79f78813 Fix vt(4) detection in kbdcontrol and vidcontrol
As sc(4) and vt(4) coexist and are both enabled in GENERIC, the existence
of a vt(4) sysctl is not sufficient to determine that vt(4) is in use.

Reported by:	Trond Endrestøl
2014-07-02 20:40:59 +00:00
Baptiste Daroussin
01c2b8ac0d use .Mt to mark up email addresses consistently (part2)
PR:		191174
Submitted by:	Franco Fichtner  <franco@lastsummer.de>
2014-06-20 09:57:27 +00:00
Aleksandr Rybalko
30bf10ef15 o Teach vidcontrol(1) how to load vt(4) font.
o Teach vidcontrol(1) to distinct which virtual terminal system is running now.
o Load vt(4) fonts from different location.
o Add $FreeBSD$ tag for path.h.

Tested by:	Claude Buisson <clbuisson@orange.fr>

MFC after:	7 days
Sponsored by:	The FreeBSD Foundation
2014-05-29 13:09:48 +00:00
Simon J. Gerraty
fae50821ae Updated dependencies 2014-05-16 14:09:51 +00:00
Simon J. Gerraty
76b28ad6ab Updated dependencies 2014-05-10 05:16:28 +00:00
Simon J. Gerraty
d1d0158641 Merge from head 2013-09-05 20:18:59 +00:00
Eitan Adler
a8de143c02 The M_VESA_MODE_MAX is latest valid mode - not the first invalid.
Permit its use in vidcontrol -i

PR:		bin/119483
Submitted by:	Dan Lukes <dan@obluda.cz>
Arrival-Date:	Wed Jan 09 10:30:01 UTC 2008
Reviewed by:	ed
MFC after:	3 days
2013-05-11 13:32:38 +00:00
Simon J. Gerraty
7cf3a1c6b2 Updated dependencies 2013-03-11 17:21:52 +00:00
Simon J. Gerraty
f5f7c05209 Updated dependencies 2013-02-16 01:23:54 +00:00
Simon J. Gerraty
23090366f7 Sync from head 2012-11-04 02:52:03 +00:00
Ed Schouten
bf70becee6 More -Wmissing-variable-declarations fixes.
In addition to adding `static' where possible:

- bin/date: Move `retval' into extern.h to make it visible to date.c.
- bin/ed: Move globally used variables into ed.h.
- sbin/camcontrol: Move `verbose' into camcontrol.h and fix shadow warnings.
- usr.bin/calendar: Remove unneeded variables.
- usr.bin/chat: Make `line' local instead of global.
- usr.bin/elfdump: Comment out unneeded function.
- usr.bin/rlogin: Use _Noreturn instead of __dead2.
- usr.bin/tset: Pull `Ospeed' into extern.h.
- usr.sbin/mfiutil: Put global variables in mfiutil.h.
- usr.sbin/pkg: Remove unused `os_corres'.
- usr.sbin/quotaon, usr.sbin/repquota: Remove unused `qfname'.
2012-10-19 14:49:42 +00:00
Marcel Moolenaar
7750ad47a9 Sync FreeBSD's bmake branch with Juniper's internal bmake branch.
Requested by: Simon Gerraty <sjg@juniper.net>
2012-08-22 19:25:57 +00:00
Andrey A. Chernov
436f647402 Call set_terminal_mode() after video mode change, not before, because
video mode change always reset terminal mode to xterm.
It allows things like 'vidcontrol -T cons25 80x30' works as supposed,
and allows 'allscreens_flags="-T cons25 80x30"' in /etc/rc.conf too.

MFC after:      1 week
2012-06-29 12:55:36 +00:00
Ulrich Spörlein
3df5ecac8c Spelling fixes for usr.sbin/ 2011-12-30 10:58:14 +00:00
Ulrich Spörlein
f76b319989 Reencode files to UTF-8. Drop CP1252 em-dash. 2011-12-30 00:59:08 +00:00
Ed Schouten
3be02c20ca Add static keywords to vidcontrol(1).
While there, remove the false optimisation of the colors array. It seems
that changing it to an array of pointers instead of a 16x16 array does
not cause any increase in binary size at all.
2011-12-11 21:02:33 +00:00
Ulrich Spörlein
0d9deed52c mdoc: drop redundant .Pp and .LP calls
They have no effect when coming in pairs, or before .Bl/.Bd
2010-10-08 12:40:16 +00:00
Jung-uk Kim
f46f4ae113 Print memory model of the video mode except for planar memory model.
'P', 'D', 'C', 'H', 'V' mean packed pixel, direct color, CGA, Hercules,
VGA X memory models respectively where they have fixed number of planes.
2010-03-29 20:12:44 +00:00
Ed Schouten
71ccf09269 The last big commit: let usr.sbin/ use WARNS=6 by default. 2010-01-02 11:07:44 +00:00
Ed Schouten
c8f1c81702 Add a new flag to vidcontrol, -T, that allows terminal mode switching.
This will make it more easy for people to experiment with TERM=xterm.
Instead of echoing these strange escape sequences, I can just instruct
them to run `vidcontrol -T xterm'.
2009-11-11 08:39:57 +00:00
Ruslan Ermilov
6855a26320 Tweak some wording and markup. 2006-12-22 23:23:59 +00:00
Ruslan Ermilov
eb0fa6f5d7 Remove bogus casts of valid integer ioctl() arguments. 2006-09-26 21:46:12 +00:00
Craig Rodrigues
387d535430 Fix so that color changes are not lost when the video mode changes.
PR:	bin/83553
Submitted by:	Dan Lukes <dan at obluda dot cz>
2005-09-17 12:52:04 +00:00