Fixed longstanding namespace convolution involving rune_t vs wchar_t...
This change breaks similar (but more convoluted) convolutions in the
stddef.h in gcc distributions. Ports of gcc should avoid using the
gcc headers.
page dir+table index.
pmap.h: remove NUPDE, it was wrong and not used. Sanitize KSTKPTEOFF.
vmparam.h: Calculate virtual addr from PDI+PTI from pmap.h rather than
using magic math. Remove UPDT, not used.
Ensure that queued commands are not touched by the abort code by setting
the SCB status to indicate what queue it is in.
Fix deadlocks when using SCB paging by using SCBs from the assigned_scbs
queue or an SCB that completed during the same interrupt if needed.
Don't ever use insl to pull SCBs from any of the controllers. You can
only do 8bit PIO reads. This only affected SCB paging.
With this checkin, SCB paging works quite a bit better, but I still have
some problems with it that may be caused by a firmware problem in my
PD1800s. It seems that using a tag number higher than the maximum number
of tags allowed by the device, confuses it. For example, if I queue
two commands, tagged 3 and 36, it never reconnects for tag 36.
mapped to semi-random place(s) depending on the content(s) of physical
address 0xA0000. This was fatal at least on my system with a some
memory-mapped devices. Console syscons somehow wasn't affected. It
bogusly hardcodes the address. Sigh.
should be <= than subordinate, not the other way around.
They are both true if the bridge is not cascaded (i.e., twin-channel
scsi/e-net adapters won't be affected by this bug), which is probably why
it was unnoticed until today.
implementations, and synchronizes us with the Nomad's latest code.
This code is based on the Nomad code, but heavily hacked by me.
Reviewed by: phk
Submitted by: the 'Nomads'
in place device drivers can now register power-down/power-up routines so
that we can use common routines to power-up/power-down cards for
insert/removals, suspend/resume, etc..
Reviewed by: phk
Submitted by: the 'Nomads'
strange results. This bug has been in here for a loooong time.
Many thanks to Pedro Salenbauch for finding this.
Submitted by: pedrosal@nce.ufrj.br (Pedro Salenbauch)
regarding apm to LINT
- Disabled the statistics clock on machines which have an APM BIOS and
have the options "APM_BROKEN_STATCLOCK" enabled (which is default
in GENERIC now)
- move around some of the code in clock.c dealing with the rtc to make
it more obvios the effects of disabling the statistics clock
Reviewed by: bde
8 not the 18 I was using during some of my own testing. Ooops.
For those that want to change the number for experimentation, you can
set the value on line 1553 of this file.
One of the manifiestations of the problem includes the -4 RSS problem
in ps.
Reviewed by: dyson
Submitted by: Stephen McKay <syssgm@devetir.qld.gov.au>
(Rev E or greater), aic7850, aic7860, aic7870, and aic7880 controllers.
SCB paging is enabled with the option "AHC_SCBPAGING_ENABLE". Full
comments on the algorithm are at the top of i386/scsi/aic7xxx.c.
options "AHC_TAGENABLE" and "AHC_QUEUE_FULL" have been removed. The
default is 4 tags without SCB paging, 8 with.
Clear the SCSIRSTI bit after throwing a bus reset. Some cards seem to get
confused otherwise.
Handle SCSIRSTI interrupts before checking to see if there is a valid
SCB in use since this can happen. (Clears PR# i386/1123)
Clean up the way we determine the number of SCBs on the card
(courtesy of Dan Eischen).
Guard against attempts to negotiate wide to a narrow controller.
Fix some comments.
Update my copyrights.
aic7770 >= Rev E, aic7850, aic7860, aic7870, and ai7880 based controllers.
Make findSCB safer for non-tagged commands when tagged commands are
active on the controller. The symptoms of this problem were
"Overlapped commands attempted" messages during error recovery
attempts.
Compact scratch ram usage. This leaves 8 bytes free for future use.
Clean up some comments.
aic7xxx_reg.h:
Update my copyright.
and B_READ before writing. This was was fatal. They also broke the
clearing of B_INVAL before doing i/o. This didn't actually matter.
Submitted by: mostly by joerg
compatibility slice. They were forgotten on last-close and then
creating them on first-open failed.
Devfs entries for slices other than the one containing the root file
system are still invisible unless you open a non-devfs inode on the
slice.
- More code cleanups
- #ifdef DEBUG debugging code
- More consistant printfs
- Better handling of the apm_int() assembly code (mostly from Bruce Evans)
Reviewed by: bde
1) Require all callers to pass a valid route pointer to ip_output()
so that we don't have to check and allocate one off the stack
as was done before. This eliminates one test and some stack
bloat from the common (UDP and TCP) case.
2) Perform the IP header checksum in-line if it's of the usual length.
This results in about a 5% speed-up in my packet-generation test.
3) Use ip_vhl field rather than ip_v and ip_hl bitfields.
forked child to be dissociated from the parent).
Cleanup fork1(), implement vfork() and fork() in terms of rfork() flags.
Remove RFENVG, RFNOTEG, RFCNAMEG, RFCENVG which are Plan9 specific and cannot
possibly be implemented in FreeBSD.
Renumbered the flags to make up for the removal of the above flags.
Reviewed by: peter, smpatel
Submitted by: Mike Grupenhoff <kashmir@umiacs.umd.edu>
1) Set the persist timer to help time-out connections in the CLOSING state.
2) Honor the keep-alive timer in the CLOSING state.
This fixes problems with connections getting "stuck" due to incompletion
of the final connection shutdown which can be a BIG problem on busy WWW
servers.
- always use pci_conf_read() and pci_conf_write(). (This is required to
simulate non-existant devices in my system for PCI bridge code tests.)
- reorder some functions (put the main functions at the end).
- correct off by one bug in the code dealing with unitialized PCI to PCI
bridge chips. (Bug found by ASAMI Satoshi.)
- print function number for multi-function devices.
assignment to avoid one bug and several pessimizations.
In the old version, gcc-2.6.3 (i386 version) generates 16 bytes
of static data and copies it using 4 4-byte load-stores. gcc-2.7.2
generates 2 1-byte stores and calls memset() to zero 14 bytes.
Linking fails because memset() doesn't exist in the kernel.
In both versions, the 2 bytes stored directly are all that is
actually used unless the null padding at the end is used, since
the 3 4-byte words in the middle are initialized again by struct
assignment. These words are misaligned. gcc generates misaligned
load-stores for (small) misaligned struct copies.
Submitted by: Bruce Evans
an application #defines `noreturn'.
Changed one instance of `const' similarly. This is less like to be a
problem since applications shouldn't #define `const', and the common
hack of #defining `const' as nothing gives harmless (?) null attributes
instead of syntax errors.
Fixed comments on #endifs to match code.
common labels for LINT. There are still some common declarations for the
!KERNEL case in tcp_debug.h and spx_debug.h. trpt depends on the ones in
tcp_debug.h.
common labels for LINT. There are still some common declarations for the
!KERNEL case in tcp_debug.h and spx_debug.h. trpt depends on the ones in
tcp_debug.h.
bug only affected FPU emulators. It might have caused bogus FPU states
in core dumps and in the child pcb after a fork. Emulated FPU states
in core dumps don't work for other reasons, and the child FPU state
is reinitialized by exec, so the problem might not have caused any
noticeable affects.
Cleaned up #includes.
was duplicated until the canq filled up, and write() normally returned 0.
This case is apparently rare. It was reported for Jove's shell buffer in
PR 1130.
Clarified GUS DMA Settings.
Other misc. changes.
This should hold us over until I can finish cleaning up TASD, and finish
reintegrating all of the FreeBSD changes to the sound driver. At that time
this document will be removed, and it's information moved to the handbook.
header for use in decompressing subsequant packets. If cslip gets garbage
(such as what happens when there is a port speed mismatch or modem line
noise), it will occasionally mistake the packet as a valid uncompressed
packet. When it tries to save off the header, it doesn't bother to check
for the validity of the header length and will happily clobber not only
the cslip data structure, but parts of other kernel memory that happens
to follow it...causing, ahem, undesired behavior.
is needed because of the vm_fault used to bring the page table page
for the kernel stack (UPAGES) back in. The consequence of the
previous incorrect change was a system hang.
channel at the same time. The functions isa_dma_acquire() and
isa_dma_release() should be used in all ISA drivers which call isa_dmastart().
This can be used more generally to register the usage of DMA channels in
any driver, but it is required for drivers using isa_dmastart() and friends.
Clean up sanity checks, error messages, etc.
Remove isa_dmadone_nobounce(), it is no longer needed
Reviewed by: bde
Moved declaration of bootverbose to a better place. It isn't
machine-dependent.
proc.h:
Moved declaration of cpu_fork() to a better place. Only its
implementation is machine-dependent.
hd essentially wired the FreeBSD drive number to 0 without changing
the BIOS drive number. Now the numbers can be specified independently.
Replaced the BOOT_HD compile time flag with with BOOT_HD_BIAS. Defining
the new flag as 1 should give the same behaviour as defining the old
flag as anything. I haven't tested defining these flags.
This fixes a panic that occurs when ifconfig ioctl(s) were interrupted
by IP traffic at the wrong time - resulting in a NULL pointer dereference.
This was originally noticed on a FreeBSD 1.0 system, but the problem still
exists in current sources.
#include <i386/include/clock.h> to get sysbeep() prototype
pcic.c:
add appropriate #ifdef around a prototype to quiet GCC because
fn decl. is also #ifdef'd.
They don't have BUSY de-asserted by the time they ACK (and thus cause
an interrupt). The workaround is to try seeing if the BUSY will be
de-asserted soon, and if not, to use an incremental backoff and
semi-polled mode instead of the fixed timeout with 1/2 s we've been
using previously (that caused the printer to run really slooow).
Printers that have been working previously should not be affected by
this.
keepalive on all tcp sessions. Setsockopt(2) cannot override this setting.
Maybe another one is needed that just changes the default for SO_KEEPALIVE ?
Requested by: Joe Greco <jgreco@brasil.moneng.mei.com>
