Commit Graph

28 Commits

Author SHA1 Message Date
Warner Losh
2ece8174c1 Use BUS_PROBE_DEFAULT in preference to 0. Also for vx, return
BUS_PROBE_LOW_PRIORITY in stead of ifdef for devices that xl and vx
both support so that xl will snarf them on up.
2005-03-01 07:50:12 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Robert Watson
095f2ac443 Since if_txp doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.

Note: mutexes are initialized in the softc for this driver, but the
locking appears inadequate to allow Giant-free operation.
2004-08-13 23:53:36 +00:00
Warner Losh
794950069f Remove the setting of the pci config variables on power state changes.
The bus does this now.
2004-06-28 20:26:21 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Maxime Henrion
866a788cc2 We don't need to initialize if_output, ether_ifattach() does it
for us.
2004-05-23 16:11:53 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Matthew N. Dodd
e3bbbec2ca Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
fa4b32fa80 All current uses of pci_set_powerstate are bogus, at least in theory.
However, they are presently necessary due to bigger bogusness in the
pci bus layer not doing the right thing on suspend/resume or on
initial device probe.  This is exactly the sort of thing that the
BURN_BRIDGES option was invented for.  Mark all of them as
BURN_BRIDGES.  As soon as I have the powerstate stuff properly
integrated into the pci bus code, I intend to remove all these
workarounds.
2003-07-03 14:00:57 +00:00
Matthew N. Dodd
533294b956 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
David E. O'Brien
8368cf8f75 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Jeff Roberson
1274438838 Initialize variables before use. This was needed to pass -Werror.
Reviewed by:	jake
2002-03-19 05:14:23 +00:00
Brooks Davis
437e48e931 Don't pass an interface pointer to VLAN_INPUT{,_TAG}. Get it from the
mbuf instead.

Suggested by:	fenner
2001-12-03 17:28:27 +00:00
Jonathan Lemon
b951f06f50 Have the driver announce what capabilities it supports. These are
currently not under user control.
2001-09-18 18:41:39 +00:00
Brooks Davis
9d4fe4b2b0 Make vlan(4) loadable, unloadable, and clonable. As a side effect,
interfaces must now always enable VLAN support.

Reviewed by:	jlemon
MFC after:	3 weeks
2001-09-05 21:10:28 +00:00
Bill Paul
89b1abc0bf Re-order things slightly in the RX handler for VLAN support: we need
call vlan_input_tag() after stripping the ether header from the frame
with m_adj(), not before.

Noticed by: Brooks Davis <brooks@one-eyed-alien.net>
2001-07-31 16:38:58 +00:00
Bill Paul
2be840b347 Remember to zero out certain things that we malloc() and/or contigmalloc(). 2001-07-27 19:38:56 +00:00
Bill Paul
386a59d734 Uncomment a return(ENXIO) that I commented out for debugging purposes. 2001-07-27 18:28:37 +00:00
Bill Paul
2a5772457d Turn on __STRICT_ALIGNMENT. We need this to fix up alignment so the alpha
won't trap.
2001-07-23 22:27:17 +00:00
Bill Paul
362c5c1e02 You were knocked senseless by the Boomerang, spun around by the Cyclone,
blown over by the Hurricane and had a house dropped on you by the Tornado.
Now it's time to have your parade rained on by... the Typhoon!

This commit adds driver support for 3Com 3cR990 10/100 ethernet
adapters based on the Typhoon I and Typhoon II chipsets. This is actually
a port of the OpenBSD driver with many hacks by me.

No Virginia, there isn't any support for the hardware crypto yet. However
there is support for TCP/IP checksum offload and VLANs.

Special thanks go to Jason Wright, Aaron Campbell and Theo de Raadt for
squeezing enough info out of 3Com to get this written, and for doing
most of the hard work.

Manual page is included. Compiled as a module and included in GENERIC.
2001-07-23 20:44:54 +00:00