Commit Graph

16 Commits

Author SHA1 Message Date
Bryan Drewery
5608fd23c2 Revert r267233 for now. PIE support needs to be reworked.
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
   build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
   where it never would work anyhow, such as csu or loader. This suggests
   there may be better ways of adding support to the tree. Many of these
   cases can be fixed such that -fPIE will work but there is really no
   reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
   really building libraries but have been using bsd.prog.mk because the code
   is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
   been needed.

We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.

Reported by:	kib
2014-08-19 15:04:32 +00:00
Bryan Drewery
864c53ead8 In preparation for ASLR [1] support add WITH_PIE to support building with -fPIE.
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.

Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]

Mark known build failures as NO_PIE for now.

The only known runtime failure was rtld.

[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by:		Shawn Webb <lattera@gmail.com>
Discussed between:	des@ and Shawn Webb [2]
2014-06-08 17:29:31 +00:00
Warner Losh
3bdf775801 NO_MAN= has been deprecated in favor of MAN= for some time, go ahead
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
2014-04-13 05:21:56 +00:00
Marcel Moolenaar
0815243c39 Add support for bmake. This includes:
1.  Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
    there's a bootstrap complication in ths respect. Avoid it. Make the
    necessary changes to have upgrade_checks work wth bmake anyway.
2.  Remove the use of -E. It's not needed in our build because we use ?= for
    the respective variables, which means that we'll take the environment
    value (if any) anyway.
3.  Properly declare phony targets as phony as bmake is a lot smarter (and
    thus agressive) about build avoidance.
4.  Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
    smarter about build avoidance and should not find files we generate in
    the source tree. We should not have files in the repository we want to
    generate, but this is an easier way to cross this hurdle.
5.  Have behavior under bmake the same as it is under make with respect to
    halting when sub-commands fail. Add "set -e" to compound commands so
    that bmake is informed when sub-commands fail.
6.  Make sure crunchgen uses the same make as the rest of the build. This
    is important when the make utility isn't called make (but bmake for
    example).
7.  While here, add support for using MAKEOBJDIR to set the object tree
    location. It's the second alternative bmake looks for when determining
    the actual object directory (= .OBJDIR).

Submitted by:	Simon Gerraty <sjg@juniper.net>
Submitted by:	John Van Horne <jvanhorne@juniper.net>
2012-10-06 20:01:05 +00:00
David E. O'Brien
b5ae8dbaa5 Centralize the specification of the krb5 build tools. 2012-06-01 21:26:28 +00:00
David E. O'Brien
614304eccc * Remove headers from SRCS that are not generated
(and are in /usr/src/crypto/heimdal/).

* Avoid race conditions with 'make -j<N>'.
2012-05-30 22:21:25 +00:00
Stanislav Sedov
ae77177087 - Update FreeBSD Heimdal distribution to version 1.5.1. This also brings
several new kerberos related libraries and applications to FreeBSD:
  o kgetcred(1) allows one to manually get a ticket for a particular service.
  o kf(1) securily forwards ticket to another host through an authenticated
    and encrypted stream.
  o kcc(1) is an umbrella program around klist(1), kswitch(1), kgetcred(1)
    and other user kerberos operations. klist and kswitch are just symlinks
    to kcc(1) now.
  o kswitch(1) allows you to easily switch between kerberos credentials if
    you're running KCM.
  o hxtool(1) is a certificate management tool to use with PKINIT.
  o string2key(1) maps a password into key.
  o kdigest(8) is a userland tool to access the KDC's digest interface.
  o kimpersonate(8) creates a "fake" ticket for a service.

  We also now install manpages for some lirbaries that were not installed
  before, libheimntlm and libhx509.

- The new HEIMDAL version no longer supports Kerberos 4.  All users are
  recommended to switch to Kerberos 5.

- Weak ciphers are now disabled by default.  To enable DES support (used
  by telnet(8)), use "allow_weak_crypto" option in krb5.conf.

- libtelnet, pam_ksu and pam_krb5 are now compiled with error on warnings
  disabled due to the function they use (krb5_get_err_text(3)) being
  deprecated.  I plan to work on this next.

- Heimdal's KDC now require sqlite to operate.  We use the bundled version
  and install it as libheimsqlite.  If some other FreeBSD components will
  require it in the future we can rename it to libbsdsqlite and use for these
  components as well.

- This is not a latest Heimdal version, the new one was released while I was
  working on the update.  I will update it to 1.5.2 soon, as it fixes some
  important bugs and security issues.
2012-03-22 08:48:42 +00:00
Marius Strobl
82abac5ecf Add roken.h to SRCS. This fixes the compilation of slc during a
buildworld on a host running a world built with WITHOUT_KERBEROS
defined.
2008-06-18 21:20:50 +00:00
Doug Rabson
33f1219925 Fix conflicts after heimdal-1.1 import and add build infrastructure. Import
all non-style changes made by heimdal to our own libgssapi.
2008-05-07 13:53:12 +00:00
Alexander Kabaev
a3c734cc52 Fix generator glue to only expose extern struct units %s_units[] is
struct units defintition it known. The above construct is treated
as an incorrect C by GCC 4.2 otherwise.
2007-05-19 03:29:37 +00:00
Ruslan Ermilov
3a30b28fe9 Apply the .PHONY attribute to the ../make*/make* targets. This
causes them to be recreated (if needed) early, when doing "make
depend" here, before generating headers that depend on them.
This should fix breakages often seen while doing incremental
(NO_CLEAN) cross-builds.
2005-11-10 21:03:58 +00:00
Ruslan Ermilov
e653b48c80 Start the dreaded NOFOO -> NO_FOO conversion.
OK'ed by:	core
2004-12-21 08:47:35 +00:00
Ruslan Ermilov
86751859b5 style.Makefile(5).
OK'ed by:	nectar
2004-02-05 18:51:52 +00:00
Ruslan Ermilov
88a15798d4 Try harder to pick up the correct print_version.c. The old version
works before bsd.dep.mk,v 1.44, whether .depend file exists or not,
but the contents of .depend file is wrong.  With bsd.dep.mk,v 1.44,
the contents of .depend file is always broken, and build without a
.depend file is broken too.  With this change it works reliably in
all cases.  Ugh.
2004-02-05 18:49:35 +00:00
Ruslan Ermilov
45bc0b2b97 asn1_compile needs roken.h. 2004-02-01 09:30:02 +00:00
Ruslan Ermilov
11bf3600e8 Overhaul of kerberos5/ makefiles. Most significant changes are:
- Dropped support for standalone builds, this was only partially
  supported anyway, and required so much magic in makefiles that
  made life dangerous (e.g., by using the custom yacc rules).

- Got rid of .OBJDIR in makefiles -- makes building of individual
  files possible again.

- Made the .x.c transformations -j safe.

- Reprogrammed LDADD to fix static build of some utilities that
  was broken.

- Fixed LDFLAGS and DPADD in the WITH_OPENLDAP case -- positively
  affects the contents of .depend files.

- Removed redundant .h's from SRCS, only kept those that are
  generated.

- libkrb5/ INCS were bogusly installed again with libgssapi/.

- Made build-tools real tools with their own makefiles in
  separate directories.  This allows us to properly track
  their dependencies, etc.

- Faster build, 21% less of makefile code!

Approved by:	nectar
Reviewed by:	markm
Silence on:	arch
2004-01-31 08:15:57 +00:00