being a bootstrap tool. However, for reproducible build output,
FreeBSD added dd status=none because it was otherwise difficult to
suppress the status information, but retain any errors that might
happen. There's no real reason that dd has to be a build tool, other
than we use status=none unconditional. Remove dd from a bootstrap tool
entirely by only using status=none when available. This may also help
efforts to build the system on non-FreeBSD hosts as well.
Differential Revision: https://reviews.freebsd.org/D8605
callout_stop() recently started returning -1 when the callout is already
stopped, which is not handled by the netgraph code. Properly filter
the return value. Netgraph callers only want to know if the callout
was cancelled and not draining or already stopped.
Discussed with: julian, glebius
MFC after: 2 weeks
When handling a GPE ACPI interrupt object the EcSpaceHandler()
function can be called which checks the EC_EVENT_SCI bit and then
recurse on the EcGpeQueryHandler() function. If there are multiple GPE
events pending the EC_EVENT_SCI bit will be set at the next call to
EcSpaceHandler() causing it to recurse again via the
EcGpeQueryHandler() function. This leads to a slow never ending
recursion during boot which prevents proper system startup, because
the EC_EVENT_SCI bit never gets cleared in this scenario.
The behaviour is reproducible with the ALASKA AMI in combination with
a newer Skylake based mainboard in the following way:
Enter BIOS and adjust the clock one hour forward. Save and exit the
BIOS. System fails to boot due to the above mentioned bug in
EcGpeQueryHandler() which was observed recursing multiple times.
This patch adds a simple recursion guard to the EcGpeQueryHandler()
function and also also adds logic to detect if new GPE events occurred
during the execution of EcGpeQueryHandler() and then loop on this
function instead of recursing.
Reviewed by: jhb
MFC after: 2 weeks
When a TCP segment with the FIN bit set was received in the CLOSED state,
a TCP RST-ACK-segment is sent. When computing SEG.ACK for this, the
FIN counts as one byte. This accounting was missing and is fixed by this
patch.
Reviewed by: hiren
MFC after: 1 month
Sponsored by: Netflix, Inc.
Differential Revision: https://svn.freebsd.org/base/head
Use after free happens for state that is deleted. The reference
count is what prevents the state from being freed. When the
state is dequeued, the reference count is dropped and the memory
freed. We can't dereference the next pointer or re-queue the
state.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8671
This adds support to camcontrol(8) and libcam(3) for getting and setting
the time on SCSI protocol drives. This is more commonly found on tape
drives, but is a SPC (SCSI Primary Commands) command, and may be found
on any device that speaks SCSI.
The new camcontrol timestamp subcommand allows getting the current device
time or setting the time to the current system time or any arbitrary time.
sbin/camcontrol/Makefile:
Add timestamp.c.
sbin/camcontrol/camcontrol.8:
Document the new timestamp subcommand.
sbin/camcontrol/camcontrol.c:
Add the timestamp subcommand to camcontrol.
sbin/camcontrol/camcontrol.h:
Add the timestamp() function prototype.
sbin/camcontrol/timestamp.c:
Timestamp setting and reporting functionality.
sys/cam/scsi/scsi_all.c:
Add two new CCB building functions, scsi_set_timestamp() and
scsi_report_timestamp(). Also, add a new helper function,
scsi_create_timestamp().
sys/cam/scsi/scsi_all.h:
Add CDB and parameter data for the the set and report timestamp
commands.
Add function declarations for the new CCB building and helper
functions.
Submitted by: Sam Klopsch
Sponsored by: Spectra Logic
MFC After: 2 weeks
buf_ring contains an assert that checks whether an item being
enqueued already exists on the ring. There is a subtle bug in
this assert. An item can be returned by a peek() function and
freed, and then the consumer thread can be preempted before
calling advance(). If this happens the item appears to still be
on the queue, but another thread may allocate the item from the
free pool and wind up trying to enqueue it again, causing the
assert to trigger incorrectly.
Fix this by skipping the head of the consumer's portion of the
ring, as this index is what will be returned by peek().
Sponsored by: Dell EMC Isilon
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D8685
Reviewed by: hselasky
called to allocate a new page of radix trie nodes, there could be a call to
vm_radix_remove() on the same trie (of PG_CACHED pages) as the in-progress
vm_radix_insert(). With the removal of PG_CACHED pages, we can simplify
vm_radix_insert() and vm_radix_remove() by removing the flags on the root of
the trie that were used to detect this case and the code for restarting
vm_radix_insert() when it happened.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8664
actual numbers would help debugging (also, `MSR' and `ACPI' are standard
abbreviations and thus should be properly capitalized)
- Rephrase unsupported AMD CPUs message and wrap as an overly long line:
`sorry' 1) is wrongly spelled after period (starts with a small letter)
and 2) carries emotional "tinge" that is unnecessary and even bogus in
debug message; `implemented' is not the best word as `supported' suits
better in this context
- Improve readability when reporting resulted P-state transition (debug)
Approved by: jhb
Prior to this change the loader self relocation code interpreted amd64's
rela relocations as if they were rel relocations, discarding the addend.
This "works" because GNU ld 2.17.50 stores the addend value in both the
r_addend field of the relocation (as expected) and at the target of the
relocation.
Other linkers, and possibly other versions of GNU ld, won't have this
behaviour, so interpret the relocations correctly.
Reported by: George Rimar
Reviewed by: andrew
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8681
miibus_writereg.
Reduce the DELAY() between reads while waiting for MII access.
Spotted by: yongari
Sponsored by: Rubicon Communications, LLC (Netgate)
If bufring is used for per-TX ring descs, don't update "available"
counter, which is only used to help debugging.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8674
Writing the full queue size to it every time was makeing it overflow with a
lot of bogus values.
This fixes the interrupt storms on irq 40.
Sponsored by: Rubicon Communications, LLC (Netgate)
Fix ioat_release to only set is_completion_pending if DMAs were actually
queued. Otherwise, the spurious flag could trigger an assert in the
reset path on INVARIANTS kernels.
Reviewed by: bdrewery, Suraj Raju @ Isilon
Sponsored by: Dell EMC Isilon
This allows the driver to be built in a kernel with no FDT support, e.g.
on arm64 with just ACPI.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
It is quite specific mode of operation without storing on-disk metadata.
It can be useful in some cases in combination with some external control
tools handling mirror creation and disks hot-plug.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
It was an experimental tunable, and is now deemed to be road blocker
for further changes. Time to retire it.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8654
Bring in the most recent copy of NetBSD's db_disasm, to fix bugs and add more
instructions.
* Fix several bugs in the disassembler, most notably the disassembly of the
rlwi* instructions, the original reason for bringing in this change.
* Add more registers to the SPR list
* Add more instructions to the opcode table
Obtained from: NetBSD
MFC after: 2 weeks
Attempt to fix powerpc64 LINT kernel broken by r308000. Netmap's use of
a uint64_t wchan seems odd, but in the interest of minimizing this
change just cast through uintptr_t to silence the compiler warning.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8669
- On control request update all status pages, since they may also be
affected if user enables/disables enclosure slots.
- Periodically update element descriptors too, since there is some
hardware where they are changed dynamically.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
passing it to firmware for all Gen3 controllers.
For Thunderbolt controller, keep the legacy behavior i.e. return the SYNCHRONIZE_CACHE command with success status from driver itself.
There is Sysctl parameter 'block_sync_cache' is provided to enable customers either to block/unblock these commands to facilitate
legacy behavior if there is a compatibility issue. Default value for module parameter is to unblock this command.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
and return without processing event in AEN thread, if controller reset is in progress.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
If a SCSI IO times out, then before initiating OCR, now the driver will try to send a
target reset to the particular target for which the IO is timed out. If that also fails,
then the driver will initiate OCR.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
Did the same by setting sc->aen_cmd = NULL when aborting AEN is successful.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
MFI linked list in megaraid_sas driver is used for mfi-mpt pass-through commands.
This list can be corrupted due to many possible race conditions in driver and
eventually we may see kernel panic.
One example -
MFI frame is freed from calling process as driver send command via polling method and interrupt
for that command comes after driver free mfi frame (actually even after some other context reuse
the mfi frame). When driver receive MPT frame in ISR, driver will be using the index of MFI and
access that MFI frame and finally in-used MFI frames list will be corrupted.
High level description of new solution -
Free MFI and MPT command from same context.
Free both the command either from process (from where mfi-mpt pass-through was called) or from
ISR context. Do not split freeing of MFI and MPT, because it creates the race condition which
will do MFI/MPT list.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
