called to allocate a new page of radix trie nodes, there could be a call to
vm_radix_remove() on the same trie (of PG_CACHED pages) as the in-progress
vm_radix_insert(). With the removal of PG_CACHED pages, we can simplify
vm_radix_insert() and vm_radix_remove() by removing the flags on the root of
the trie that were used to detect this case and the code for restarting
vm_radix_insert() when it happened.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8664
a new page of radix trie nodes to complete a vm_radix_insert() operation
that was requested by vm_page_cache(). Specifically, vm_page_cache()
already held the free page queue lock when UMA tried to acquire it through
a call to vm_page_alloc(). This code path no longer exists, so there is no
longer any reason to allow recursion on the free page queue mutex.
Improve nearby comments.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8628
The swap pager enqueues laundered pages near the head of the inactive queue
to avoid another trip through LRU before reclamation. This change adds
support for this behaviour to the vnode pager and makes use of it in UFS and
ext2fs. Some ioflag handling is consolidated into a common subroutine so
that this support can be easily extended to other filesystems which make use
of the buffer cache. No changes are needed for ZFS since its putpages
routine always undirties the pages before returning, and the laundry
thread requeues the pages appropriately in this case.
Reviewed by: alc, kib
Differential Revision: https://reviews.freebsd.org/D8589
longer used. More precisely, they are always zero because the code that
decremented and incremented them no longer exists.
Bump __FreeBSD_version to mark this change.
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8583
doesn't fit into a buf, then trim readbehind and readahead evenly. If
rbehind was limited by the previous BMAP, then roundup its trim to
block size.
- Add KASSERT to check that b_blkno has proper offset from original
blkno returned by BMAP. [1]
- Add KASSERT to check that pages in buf are consecutive.
Reviewed by: kib
Submitted by: kib [1]
not remove user-space visible fields from vm_cnt or all of the references to
cached pages from comments. Those changes will come later.)
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8497
pages, specificially, dirty pages that have passed once through the inactive
queue. A new, dedicated thread is responsible for both deciding when to
launder pages and actually laundering them. The new policy uses the
relative sizes of the inactive and laundry queues to determine whether to
launder pages at a given point in time. In general, this leads to more
intelligent swapping behavior, since the laundry thread will avoid pageouts
when the marginal benefit of doing so is low. Previously, without a
dedicated queue for dirty pages, the page daemon didn't have the information
to determine whether pageout provides any benefit to the system. Thus, the
previous policy often resulted in small but steadily increasing amounts of
swap usage when the system is under memory pressure, even when the inactive
queue consisted mostly of clean pages. This change addresses that issue,
and also paves the way for some future virtual memory system improvements by
removing the last source of object-cached clean pages, i.e., PG_CACHE pages.
The new laundry thread sleeps while waiting for a request from the page
daemon thread(s). A request is raised by setting the variable
vm_laundry_request and waking the laundry thread. We request launderings
for two reasons: to try and balance the inactive and laundry queue sizes
("background laundering"), and to quickly make up for a shortage of free
pages and clean inactive pages ("shortfall laundering"). When background
laundering is requested, the laundry thread computes the number of page
daemon wakeups that have taken place since the last laundering. If this
number is large enough relative to the ratio of the laundry and (global)
inactive queue sizes, we will launder vm_background_launder_target pages at
vm_background_launder_rate KB/s. Otherwise, the laundry thread goes back
to sleep without doing any work. When scanning the laundry queue during
background laundering, reactivated pages are counted towards the laundry
thread's target.
In contrast, shortfall laundering is requested when an inactive queue scan
fails to meet its target. In this case, the laundry thread attempts to
launder enough pages to meet v_free_target within 0.5s, which is the
inactive queue scan period.
A laundry request can be latched while another is currently being
serviced. In particular, a shortfall request will immediately preempt a
background laundering.
This change also redefines the meaning of vm_cnt.v_reactivated and removes
the functions vm_page_cache() and vm_page_try_to_cache(). The new meaning
of vm_cnt.v_reactivated now better reflects its name. It represents the
number of inactive or laundry pages that are returned to the active queue
on account of a reference.
In collaboration with: markj
Reviewed by: kib
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8302
Requests which cannot be satisfied by allocators at boot time often
have unrealizable parameters. Waiting for the pagedaemon' start would
hang the boot if done in the thread0 context and just never succeed if
executed from another thread. In fact, for very early stages, sleep
attempt panics with obscure diagnostic about the scheduler state, and
explicit panic in vm_wait() makes the investigation much shorter by
cut off the examination of the thread and scheduler.
Theoretically, some subsystem might grab a resource to exhaustion, and
free it later in the boot process. If this unlikely scenario does
appear for real, the way to diagnose the trouble can be revisited.
Reported by: emaste
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D8421
in-progress count and the vnode. Prior to r188331, we always acquired
the vnode lock before incrementing the object's paging-in-progress count.
Now, we increment it before attempting to acquire the vnode lock with
LK_NOWAIT, but we never sleep acquiring the vnode lock while we have the
count incremented.
Reviewed by: kib
MFC after: 3 days
Upstream the BUF_TRACKING and FULL_BUF_TRACKING buffer debugging code.
This can be handy in tracking down what code touched hung bios and bufs
last. The full history is especially useful, but adds enough bloat that
it shouldn't be enabled in release builds.
Function names (or arbitrary string constants) are tracked in a
fixed-size ring in bufs. Bios gain a pointer to the upper buf for
tracking. SCSI CCBs gain a pointer to the upper bio for tracking.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8366
Convert vm_fault_hold()'s Boolean variables that are only used
internally to "bool". Add a comment describing why the one
remaining "boolean_t" was not converted.
Reviewed by: kib
MFC after: 8 days
pager error, leave the page to the wire owner. E.g. the page might be
a part of the invalidated buffer.
Reported and tested by: pho
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D8197
Suppose that we have an exclusively busy page, and a thread which can
accept shared-busy page. In this case, typical code waiting for the
page xbusy state to pass is
again:
VM_OBJECT_WLOCK(object);
...
if (vm_page_xbusied(m)) {
vm_page_lock(m);
VM_OBJECT_WUNLOCK(object); <---1
vm_page_busy_sleep(p, "vmopax");
goto again;
}
Suppose that the xbusy state owner locked the object, unbusied the
page and unlocked the object after we are at the line [1], but before we
executed the load of the busy_lock word in vm_page_busy_sleep(). If it
happens that there is still no waiters recorded for the busy state,
the xbusy owner did not acquired the page lock, so it proceeded.
More, suppose that some other thread happen to share-busy the page
after xbusy state was relinquished but before the m->busy_lock is read
in vm_page_busy_sleep(). Again, that thread only needs vm_object lock
to proceed. Then, vm_page_busy_sleep() reads busy_lock value equal to
the VPB_SHARERS_WORD(1).
In this case, all tests in vm_page_busy_sleep(9) pass and we are going
to sleep, despite the page being share-busied.
Update check for m->busy_lock == VPB_UNBUSIED in vm_page_busy_sleep(9)
to also accept shared-busy state if we only wait for the xbusy state to
pass.
Merge sequential if()s with the same 'then' clause in
vm_page_busy_sleep().
Note that the current code does not share-busy pages from parallel
threads, the only way to have more that one sbusy owner is right now
is to recurse.
Reported and tested by: pho (previous version)
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D8196
waiters. Otherwise, owners of the shared-busy state are left blocked
and might get into a deadlock.
Note that the vm_page_busy_downgrade() function is not used in the
tree right now.
Reported and tested by: pho (previous version)
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D8195
by vm_pageout_scan() local to vm_pageout_worker(). There is no reason
to store the pass in the NUMA domain structure.
Reviewed by: kib
MFC after: 3 weeks
target was met.
Previously, vm_pageout_worker() itself checked the length of the free page
queues to determine whether vm_pageout_scan(pass >= 1)'s inactive queue scan
freed enough pages to meet the free page target. Specifically,
vm_pageout_worker() used vm_paging_needed(). The trouble with
vm_paging_needed() is that it compares the length of the free page queues to
the wakeup threshold for the page daemon, which is much lower than the free
page target. Consequently, vm_pageout_worker() could conclude that the
inactive queue scan succeeded in meeting its free page target when in fact
it did not; and rather than immediately triggering an all-out laundering
pass over the inactive queue, vm_pageout_worker() would go back to sleep
waiting for the free page count to fall below the page daemon wakeup
threshold again, at which point it will perform another limited (pass == 1)
scan over the inactive queue.
Changing vm_pageout_worker() to use vm_page_count_target() instead of
vm_paging_needed() won't work because any page allocations that happen
concurrently with the inactive queue scan will result in the free page count
being below the target at the end of a successful scan. Instead, having
vm_pageout_scan() return a value indicating success or failure is the most
straightforward fix.
Reviewed by: kib, markj
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8111
On machines with just the wrong amount of physical memory (enough to
have a lot of bufs, but not enough to use VM_FREELIST_DMA32) it is
possible for 32-bit address limited devices to have little to no
memory left when attaching, due to potentially large vfs bio configs
consuming all memory below 4GB not protected by VM_FREELIST_ISADMA.
This causes the 32-bit devices to allocate from VM_FREELIST_ISADMA,
leaving that freelist emtpy when ISA devices need DMAable memory.
Rather than decrease VM_DMA32_NPAGES_THRESHOLD, use the time honored
technique of putting initially allocated kernel data structs
at the end (or at least not the beginning) of memory.
Since this allocation is done at boot and is wired, is not freed,
so the system is low on 32-bit (and ISA) dma'ble memory forever.
So it is a good candidate to move above 4GB.
While here, remove an unneeded round_page() from kmem_malloc's size
argument as suggested by alc. The first thing kmem_malloc() does
is a round_page(size), so there is no need to do it before the call.
Reviewed by: alc
Sponsored by: Netflix
Move PMAP_TS_REFERENCED_MAX out of the various pmap implementations and
into vm/pmap.h, and describe what its purpose is. Eliminate the archaic
"XXX" comment about its value. I don't believe that its exact value, e.g.,
5 versus 6, matters.
Update the arm64 and riscv pmap implementations of pmap_ts_referenced()
to opportunistically update the page's dirty field.
On amd64, use the PDE value already cached in a local variable rather than
dereferencing a pointer again and again.
Reviewed by: kib, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D7836
The pager getpages interface allows the caller to bound the number of
readahead and readbehind pages, and vm_fault_hold() makes use of this
feature. These bounds were ignored after r305056, causing the swap pager
to potentially page in more than the specified number of pages.
Reported and reviewed by: alc
X-MFC with: r305056
Idle page zeroing has been disabled by default on all architectures since
r170816 and has some bugs that make it seemingly unusable. Specifically,
the idle-priority pagezero thread exacerbates contention for the free page
lock, and yields the CPU without releasing it in non-preemptive kernels. The
pagezero thread also does not behave correctly when superpage reservations
are enabled: its target is a function of v_free_count, which includes
reserved-but-free pages, but it is only able to zero pages belonging to the
physical memory allocator.
Reviewed by: alc, imp, kib
Differential Revision: https://reviews.freebsd.org/D7714
The swap_pager_swapoff() function uses trylock for the object lock
before pagein, which means that either i/o to md(4) over swap, or
intensive page faults over swap pager objects might prevent swapoff()
from making any progress. Then the retry < 100 check fails and machine
panics.
If trylock fails, acquire the object lock in the blockable way and
restart the hash bucket walk. Keep retries logic for now.
Reported and tested by: pho
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7688
The removal of vm_fault_additional_pages() meant that a hard fault on
a swap-backed page would result in only that page being read in. This
change implements readahead and readbehind for the swap pager in
swap_pager_getpages(). swap_pager_haspage() is modified to return the
largest contiguous non-resident range of pages containing the requested
range.
Reviewed by: alc, kib
Tested by: pho
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7677
In particular, fix factual, grammatical, and spelling errors in various
comments, and remove comments that are out of place in this function.
Reviewed by: kib, markj
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7410
to r254304, we had separate functions for reclamation and laundering
(vm_pageout_scan) versus updating usage information, i.e., "reference
bits", on active pages (vm_pageout_page_stats), and we only performed
vm_req_vmdaemon(VM_SWAP_IDLE) if vm_pages_needed was true. However, since
r254303, if vm_swap_idle_enabled was "1", we have performed
vm_req_vmdaemon(VM_SWAP_IDLE) regardless of whether we are short of free
pages. This was unintended and too aggressive, so I suspect no one uses
this feature. With this change, we restore the historical behavior and
only perform vm_req_vmdaemon(VM_SWAP_IDLE) when we are short of free
pages.
Reviewed by: kib, markj
In particular, swapongeom_ev() needed event thread context when swap
pager configuration was performed under Giant and geom asserted that
Giant is not owned. Now both of the reason went away.
On the other hand, note that swpageom_release() is called from the
bio_done context, and possible close cannot be performed inline.
Also fix some minor issues. The swapgeom() function does not use the
td argument, remove it. Recheck that the vnode passed is still VCHR
and not reclaimed after the lock.
Reviewed by: mav
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
