the mac framework. It is needed when priv_check_cred(9) is called from
the mac callback, e.g. in the mac_portacl(4).
Reported by: az
Reviewed by: rwatson
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (gjb)
WITH[OUT]_SSP to avoid hitting an error if user has WITH_SSP in their
make.conf. Ports now use this knob.
make[7]: "/usr/src/share/mk/bsd.own.mk" line 466: WITH_SSP and
WITHOUT_SSP can't both be set.
This is similar to previous cleanup done in r188895
Approved by: bapt
Reviewed by: jlh (earlier version)
Approved by: re (marius)
MFC after: 1 week
occasion. This resulted in zero mapped segments, triggering an assert in
the PS3 CDROM driver. Allow no DMA for 0-length transfers.
Approved by: re (glebius)
MFC after: 1 week
with the vnode shared-locked. If upgrade succeeded, the inactivation
can be done immediately, instead of being postponed.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (glebius)
The r255797 was:
Increase the chance of the buffer write from the bufdaemon helper
context to succeed. If the locked vnode which owns the buffer to be
written is shared locked, try the non-blocking upgrade of the lock to
exclusive.
PR: kern/178997
Reported and tested by: Klaus Weber <fbsd-bugs-2013-1@unix-admin.de>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (glebius)
atomically upgrade shared lock to exclusive. On failure, error is
returned and lock is not dropped in the process.
Tested by: pho (previous version)
No objections from: attilio
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (glebius)
- libkern is missing __aeabi_llsl, implement this by calling __ashldi3.
- Because of how the asm entry macros are defined the boot2 code
requires the unwind symbols to exist, include them in boot2.
Approved by: re (marius)
Update the OFED Infiniband core to the version supplied in Linux
version 3.7.
The update to OFED is nearly all additional defines and functions
with the exception of the addition of additional parameters to
ib_register_device() and the reg_user_mr callback.
In addition the ibcore (Infiniband core) and ipoib (IP over Infiniband)
have both been made into completely loadable modules to facilitate
testing of the OFED stack in FreeBSD.
Finally the Mellanox Infiniband drivers are now updated to the
latest version shipping with Linux 3.7.
Submitted by: Mellanox FreeBSD driver team:
Oded Shanoon (odeds mellanox.com),
Meny Yossefi (menyy mellanox.com),
Orit Moskovich (oritm mellanox.com)
Approved by: re
newvers.sh. Pass it in from include/Makefile. If it isn't passed in,
fall back to the old logic of using dirname $0.
Using dirname $0 does not yield the path to the script if it was
sourced in from another script in another directory; you end up with
the parent script's path. That was causing newvers.sh to look one
level below the FreeBSD src/ directory when building osreldate.h and it
may find something like a git or svn repo there that has nothing to do
with FreeBSD.
PR: 174422
Approved by: re ()
MFC after: 2 weeks
install directly into standard POWER LPARs, as found for example in
QEMU. The core of this device is the SCSI RDMA protocol as also found in
Infiniband. The SRP portions of the driver will be factored out and placed
/sys/cam in the future to allow them to be used for IB storage. Thanks to
Scott Long for a great deal of implementation help.
Reviewed by: scottl
Approved by: re (kib)
CAM_EXTLUN_VALID is not erroneously set. Also add an XPORT_SRP
identifier to the known SCSI transports for the SCSI RDMA protocol, as
used, for example with Infiniband storage.
Reviewed by: scottl
Approved by: re (marius)
Set cpu_ops correctly for Xen hypervisors lacking the
vector callback feature.
Set preliminary Xen cpu_ops settings during early HVM
initialization. The old location raced with the startup
of APs.
Submitted by: Roger Pau Monné
Reviewed by: gibbs
Approved by: re (blanket Xen)
platform modules. Whether to call this function or not is highly machine
dependent: on some systems, it is required, while on others it breaks
everything. Platform modules are in a better position to figure this
out. This is required for POWER hypervisor SCSI to work correctly. There
are no functional changes on Powermac systems.
Approved by: re (kib)
property such as those found on some real and emulated IBM systems. The
approach, which is taken from Linux, is to scan through the PCI bars
until we find one large enough to contain the linear framebuffer and
which is ideally prefetchable if no "address" property can be found.
This makes the graphical console work with the pSeries target in QEMU.
Approved by: re (delphij)
operation on systems with multiple serial ports. Also turn on
interrupts for the UART device, which were disabled due to a
now-fixed bug in QEMU.
Approved by: re (gjb)
negative timeout both before and after the conversion to sbintime_t.
For periodic kqueue timer, convert zero timeout into 1ms, to avoid
interrupt storm on fast event timers.
Reported and tested by: pho
Discussed with: mav
Reviewed by: davide
Sponsored by: The FreeBSD Foundation
Approved by: re (marius)
Otherwise, knote keeps a pointer to a vnode which could become invalid
any time.
Reported by: many
Tested by: Patrick Lamaiziere <patfbsd@davenulle.org>
Discussed with: jmg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (marius)
Without these, if the timeout value passed is "large enough", the
value of the sum of it and other factors (e.g. current time as
returned by sbinuptime() or 'precision' argument) might result in a
negative number. This negative number is then passed to
eventtimers(4), which causes et_start() routine to load et_min_period
into eventtimer, making the CPU where the thread is stuck forever in
timer interrupt handler routine. This is now avoided rounding to
INT64_MAX the timeout period in case of overflow.
Reported by: kib, pho
Discussed with: kib, mav
Tested by: pho (stress2 suite, kevent7.sh scenario)
Approved by: re (kib)
original, this hides the contents of cam_compat.h from ktrace/kdump/truss,
avoiding problems there. There are no user-servicable parts in there, so
no need for those tools to be groping around in there.
Approved by: re
original, this hides the contents of cam_compat.h from ktrace/kdump/truss,
avoiding problems there. There are no user-servicable parts in there, so
no need for those tools to be groping around in there.
Approved by: re
seeing a stale fd_ofiles table once fd_nfiles is already updated,
resulting in OOB accesses.
Approved by: re (kib)
Sponsored by: EMC / Isilon storage division
Reported and tested by: pho
Reviewed by: benno
The kernel normally didn't unmap/context switch away before we accessed
the buffer most of the time, but under heavy I/O pressure and lots of
mount/unmounting this would cause a fault on nofault panic...
Reviewed by: dteske
Approved by: re (kib)
Sponsored by: Vicor
MFC after: 3 days
disable GEOM tasting to avoid the "bouncing GEOM" problem where, when
you shut down the consumer of a provider which can be viewed in multiple
ways (typically a mirror whose members are labeled partitions), GEOM
will immediately taste that provider's alter ego and reattach the
consumer.
Approved by: re (glebius)
This commit marks the point the final KBI change was made as part of the
10.0-RELEASE cycle.
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
- Remove the timeout_ch field. It's been deprecated since FreeBSD 7.0;
MPSAFE drivers should be managing their own timeout storage. The
remaining non-MPSAFE drivers have been modified to also manage their own
storage, and should be considered for updating to MPSAFE (or removal)
during the FreeBSD 10.x lifecycle.
- Add fields related to soft timeouts and quality of service, to be used
in upcoming work.
- Add room for more flags in the CCB header and path_inq structures.
- Begin support for extended 64-bit LUNs.
- Bump the CAM version number to 0x18, but add compat shims. Tested with
camcontrol and smartctl.
Reviewed by: nathanw, ken, kib
Approved by: re
Obtained from: Netflix
page, otherwise the small mappings loop would use uninitialized value.
Note that currently pmap_clear_modify() is not called for fictitious
pages.
Sponsored by: The FreeBSD Foundation
Approved by: re (glebius)
registers, to make the restarted syscall instruction pass the correct
arguments.
PR: kern/182161
Reported by: Russ Cox <rsc@swtch.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Approved by: re (marius)
measurement of load caused by time-related events still using hardclock.
For example, without this change dummynet, scheduling events each hardclock
tick, was always miscounted as load of 1.
There is still aliasing with events delayed by the new precision mechanism,
but it probably can't be avoided without moving this sampling from using
callout to some lower-level code or handling it in some other special way.
Reviewed by: davide
Approved by: re (marius)
