Commit Graph

190 Commits

Author SHA1 Message Date
Max Laier
826bf287b5 As info.rti_info[RTAX_DST] can point inside of rtm we must not free the rtm
until rt_dispatch is done with the sockaddr.

Found by:	memguard
MFC after:	3 days
2011-02-10 01:24:09 +00:00
Bjoern A. Zeeb
ee7c7fee94 Close a race acquiring the IF_ADDR_LOCK() for each entry while iterating
over all interfaces to make sure the address will neither change nor be
freed while we are working on it.

PR:		kern/146250
Submitted by:	Mikolaj Golub (to.my.trociny gmail.com)
MFC after:	1 week
2010-10-16 19:25:27 +00:00
Konstantin Belousov
04f3205755 Properly set ifi_datalen for compat32 struct if_data32.
PR:	kern/149240
Submitted by:	Stef Walter <stef memberwebs com>
MFC after:	1 weeks
2010-08-03 15:40:42 +00:00
Qing Li
0ed6142b31 This patch fixes the problem where proxy ARP entries cannot be added
over the if_ng interface.

MFC after:	3 days
2010-05-25 20:42:35 +00:00
Konstantin Belousov
427a928af7 Provide 32bit compat shims for sysctl net.route NET_RT_IFLIST.
This allows getifaddrs(3) to work for compat32 binaries.

Submitted by:	jhb (6.x version)
Reviewed by:	emaste
Tested by:	emaste and <pluknet gmail com>
MFC after:	2 weeks
2010-04-25 16:42:47 +00:00
Qing Li
c7ab66020f The proxy arp entries could not be added into the system over the
IFF_POINTOPOINT link types. The reason was due to the routing
entry returned from the kernel covering the remote end is of an
interface type that does not support ARP. This patch fixes this
problem by providing a hint to the kernel routing code, which
indicates the prefix route instead of the PPP host route should
be returned to the caller. Since a host route to the local end
point is also added into the routing table, and there could be
multiple such instantiations due to multiple PPP links can be
created with the same local end IP address, this patch also fixes
the loopback route installation failure problem observed prior to
this patch. The reference count of loopback route to local end would
be either incremented or decremented. The first instantiation would
create the entry and the last removal would delete the route entry.

MFC after:	5 days
2009-12-30 21:35:34 +00:00
Bjoern A. Zeeb
de0bd6f76b Throughout the network stack we have a few places of
if (jailed(cred))
left.  If you are running with a vnet (virtual network stack) those will
return true and defer you to classic IP-jails handling and thus things
will be "denied" or returned with an error.

Work around this problem by introducing another "jailed()" function,
jailed_without_vnet(), that also takes vnets into account, and permits
the calls, should the jail from the given cred have its own virtual
network stack.

We cannot change the classic jailed() call to do that,  as it is used
outside the network stack as well.

Discussed with:	julian, zec, jamie, rwatson (back in Sept)
MFC after:	5 days
2009-12-13 13:57:32 +00:00
Qing Li
5311e988ea As part of r196609, a call to "rtalloc" did not take the fib into
account. So call the appropriate "rtalloc_ign_fib()" instead of
calling "rtalloc_ign()".

Reviewed by:i	pointed out by bz
MFC after:	immediately
2009-08-31 00:14:37 +00:00
Qing Li
9231d35f4d In ip_output(), the flow-table module must not try to cache L2/L3
information for interface of IFF_POINTOPOINT or IFF_LOOPBACK type.
Since the L2 information (rt_lle) is invalid for these interface
types, accidental caching attempt will trigger panic when the invalid
rt_lle reference is accessed.

When installing a new route, or when updating an existing route, the
user supplied gateway address may be an interface address (this is
particularly true for point-to-point interface related modules such
as ppp, if_tun, if_gif). Currently the routing command handler always
set the RTF_GATEWAY flag if the gateway address is given as part of the
command paramters. Therefore the gateway address must be verified against
interface addresses or else the route would be treated as an indirect
route, thus making that route unusable.

Reviewed by:	kmacy, julia, rwatson
Verified by:	marcus
MFC after:	3 days
2009-08-28 07:01:09 +00:00
Bjoern A. Zeeb
20b0cdb749 Put multiple instructions into a block when iterating; unbreaks
NET_RT_DUMP, which otherwise only returned information of AF_MAX.
This was broken in r193232 (save your time - my bug, my fix).

PR:		kern/137700
Reported by:	Larry Baird (lab gta.com)
Tested by:	Larry Baird (lab gta.com)
Reviewed by:	zec, lstewart, qing
Approved by:	re (kib)
2009-08-13 09:29:52 +00:00
Robert Watson
530c006014 Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks.  Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-08-01 19:26:27 +00:00
Robert Watson
d0728d7174 Introduce and use a sysinit-based initialization scheme for virtual
network stacks, VNET_SYSINIT:

- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
  occur each time a network stack is instantiated and destroyed.  In the
  !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
  For the VIMAGE case, we instead use SYSINIT's to track their order and
  properties on registration, using them for each vnet when created/
  destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
  previously, as well as its dependency scheme: we now just use the
  SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
  they want init functions to be called for each virtual network stack
  rather than just once at boot, compiling down to DOMAIN_SET() in the
  non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
  of modinfo or DOMAIN_SET() for init/uninit events.  In some cases,
  convert modular components from using modevent to using sysinit (where
  appropriate).  In some cases, do minor rejuggling of SYSINIT ordering
  to make room for or better manage events.

Portions submitted by:	jhb (VNET_SYSINIT), bz (cleanup)
Discussed with:		jhb, bz, julian, zec
Reviewed by:		bz
Approved by:		re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
Robert Watson
eddfbb763d Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator.  Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...).  This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack.  Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory.  Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy.  Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address.  When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by:  bz
Reviewed by:            bz, zec
Discussed with:         gnn, jamie, jeff, jhb, julian, sam
Suggested by:           peter
Approved by:            re (kensmith)
2009-07-14 22:48:30 +00:00
Robert Watson
8c0fec805f Modify most routines returning 'struct ifaddr *' to return references
rather than pointers, requiring callers to properly dispose of those
references.  The following routines now return references:

  ifaddr_byindex
  ifa_ifwithaddr
  ifa_ifwithbroadaddr
  ifa_ifwithdstaddr
  ifa_ifwithnet
  ifaof_ifpforaddr
  ifa_ifwithroute
  ifa_ifwithroute_fib
  rt_getifa
  rt_getifa_fib
  IFP_TO_IA
  ip_rtaddr
  in6_ifawithifp
  in6ifa_ifpforlinklocal
  in6ifa_ifpwithaddr
  in6_ifadd
  carp_iamatch6
  ip6_getdstifaddr

Remove unused macro which didn't have required referencing:

  IFP_TO_IA6

This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc).  In a few cases, add missing if_addr_list locking
required to safely acquire references.

Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit.  Once
we have mbuf tag deep copy support, this can be fixed.

Reviewed by:	bz
Obtained from:	Apple, Inc. (portions)
MFC after:	6 weeks (portions)
2009-06-23 20:19:09 +00:00
Robert Watson
1099f828b3 Clean up common ifaddr management:
- Unify reference count and lock initialization in a single function,
  ifa_init().
- Move tear-down from a macro (IFAFREE) to a function ifa_free().
- Move reference count bump from a macro (IFAREF) to a function ifa_ref().
- Instead of using a u_int protected by a mutex to refcount(9) for
  reference count management.

The ifa_mtx is now used for exactly one ioctl, and possibly should be
removed.

MFC after:	3 weeks
2009-06-21 19:30:33 +00:00
Bjoern A. Zeeb
c03528b663 SCTP needs either IPv4 or IPv6 as lower layer[1].
So properly hide the already #ifdef SCTP code with
#if defined(INET) || defined(INET6) as well to get us
closer to a non-INET/INET6 kernel.

Discussed with:	tuexen [1]
2009-06-10 14:36:59 +00:00
Bjoern A. Zeeb
8d8bc0182e After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
2009-06-08 19:57:35 +00:00
Bjoern A. Zeeb
c2c2a7c11e Convert the two dimensional array to be malloced and introduce
an accessor function to get the correct rnh pointer back.

Update netstat to get the correct pointer using kvm_read()
as well.

This not only fixes the ABI problem depending on the kernel
option but also permits the tunable to overwrite the kernel
option at boot time up to MAXFIBS, enlarging the number of
FIBs without having to recompile. So people could just use
GENERIC now.

Reviewed by:	julian, rwatson, zec
X-MFC:		not possible
2009-06-01 15:49:42 +00:00
Robert Watson
d4b5cae49b Reimplement the netisr framework in order to support parallel netisr
threads:

- Support up to one netisr thread per CPU, each processings its own
  workstream, or set of per-protocol queues.  Threads may be bound
  to specific CPUs, or allowed to migrate, based on a global policy.

  In the future it would be desirable to support topology-centric
  policies, such as "one netisr per package".

- Allow each protocol to advertise an ordering policy, which can
  currently be one of:

  NETISR_POLICY_SOURCE: packets must maintain ordering with respect to
    an implicit or explicit source (such as an interface or socket).

  NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work,
    as well as allowing protocols to provide a flow generation function
    for mbufs without flow identifers (m2flow).  Falls back on
    NETISR_POLICY_SOURCE if now flow ID is available.

  NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for
    each packet handled by netisr (m2cpuid).

- Provide utility functions for querying the number of workstreams
  being used, as well as a mapping function from workstream to CPU ID,
  which protocols may use in work placement decisions.

- Add explicit interfaces to get and set per-protocol queue limits, and
  get and clear drop counters, which query data or apply changes across
  all workstreams.

- Add a more extensible netisr registration interface, in which
  protocols declare 'struct netisr_handler' structures for each
  registered NETISR_ type.  These include name, handler function,
  optional mbuf to flow ID function, optional mbuf to CPU ID function,
  queue limit, and ordering policy.  Padding is present to allow these
  to be expanded in the future.  If no queue limit is declared, then
  a default is used.

- Queue limits are now per-workstream, and raised from the previous
  IFQ_MAXLEN default of 50 to 256.

- All protocols are updated to use the new registration interface, and
  with the exception of netnatm, default queue limits.  Most protocols
  register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use
  NETISR_POLICY_FLOW, and will therefore take advantage of driver-
  generated flow IDs if present.

- Formalize a non-packet based interface between interface polling and
  the netisr, rather than having polling pretend to be two protocols.
  Provide two explicit hooks in the netisr worker for start and end
  events for runs: netisr_poll() and netisr_pollmore(), as well as a
  function, netisr_sched_poll(), to allow the polling code to schedule
  netisr execution.  DEVICE_POLLING still embeds single-netisr
  assumptions in its implementation, so for now if it is compiled into
  the kernel, a single and un-bound netisr thread is enforced
  regardless of tunable configuration.

In the default configuration, the new netisr implementation maintains
the same basic assumptions as the previous implementation: a single,
un-bound worker thread processes all deferred work, and direct dispatch
is enabled by default wherever possible.

Performance measurement shows a marginal performance improvement over
the old implementation due to the use of batched dequeue.

An rmlock is used to synchronize use and registration/unregistration
using the framework; currently, synchronized use is disabled
(replicating current netisr policy) due to a measurable 3%-6% hit in
ping-pong micro-benchmarking.  It will be enabled once further rmlock
optimization has taken place.  However, in practice, netisrs are
rarely registered or unregistered at runtime.

A new man page for netisr will follow, but since one doesn't currently
exist, it hasn't been updated.

This change is not appropriate for MFC, although the polling shutdown
handler should be merged to 7-STABLE.

Bump __FreeBSD_version.

Reviewed by:	bz
2009-06-01 10:41:38 +00:00
Jamie Gritton
0304c73163 Add hierarchical jails. A jail may further virtualize its environment
by creating a child jail, which is visible to that jail and to any
parent jails.  Child jails may be restricted more than their parents,
but never less.  Jail names reflect this hierarchy, being MIB-style
dot-separated strings.

Every thread now points to a jail, the default being prison0, which
contains information about the physical system.  Prison0's root
directory is the same as rootvnode; its hostname is the same as the
global hostname, and its securelevel replaces the global securelevel.
Note that the variable "securelevel" has actually gone away, which
should not cause any problems for code that properly uses
securelevel_gt() and securelevel_ge().

Some jail-related permissions that were kept in global variables and
set via sysctls are now per-jail settings.  The sysctls still exist for
backward compatibility, used only by the now-deprecated jail(2) system
call.

Approved by:	bz (mentor)
2009-05-27 14:11:23 +00:00
Marko Zec
21ca7b57bd Change the curvnet variable from a global const struct vnet *,
previously always pointing to the default vnet context, to a
dynamically changing thread-local one.  The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE().  Recursions
on curvnet are permitted, though strongly discuouraged.

This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.

The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc.  Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.

The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.

This change also introduces a DDB subcommand to show the list of all
vnet instances.

Approved by:	julian (mentor)
2009-05-05 10:56:12 +00:00
Marko Zec
093f25f8c8 In preparation for turning on options VIMAGE in next commits,
rearrange / replace / adjust several INIT_VNET_* initializer
macros, all of which currently resolve to whitespace.

Reviewed by:	bz (an older version of the patch)
Approved by:	julian (mentor)
2009-04-26 22:06:42 +00:00
Robert Watson
77ee4c0e00 Acquire address list lock before walking an interface's address list to
identify possible jail addresses on it for IPv4 and IPv6.

MFC after:	2 weeks
2009-04-20 23:23:31 +00:00
Kip Macy
427ac07f05 Extend route command:
- add show as alias for get
	- add weights to allow mpath to do more than equal cost
	- add sticky / nostick to disable / re-enable per-connection load balancing

This adds a field to rt_metrics_lite so network bits of world will need to be re-built.

Reviewed by:	jeli & qingli
2009-04-14 23:05:36 +00:00
Jamie Gritton
9c79d2432e Call prison_if from rtm_get_jailed, instead of splitting it out into
prison_check_ip4 and prison_check_ip6.  As prison_if includes a jailed()
check, remove that check before calling rtm_get_jailed.

Approved by:	bz (mentor)
2009-02-05 14:58:16 +00:00
Jamie Gritton
b89e82dd87 Standardize the various prison_foo_ip[46] functions and prison_if to
return zero on success and an error code otherwise.  The possible errors
are EADDRNOTAVAIL if an address being checked for doesn't match the
prison, and EAFNOSUPPORT if the prison doesn't have any addresses in
that address family.  For most callers of these functions, use the
returned error code instead of e.g. a hard-coded EADDRNOTAVAIL or
EINVAL.

Always include a jailed() check in these functions, where a non-jailed
cred always returns success (and makes no changes).  Remove the explicit
jailed() checks that preceded many of the function calls.

Approved by:	bz (mentor)
2009-02-05 14:06:09 +00:00
Bjoern A. Zeeb
1cecba0fcd For consistency with prison_{local,remote,check}_ipN rename
prison_getipN to prison_get_ipN.

Submitted by:	jamie (as part of a larger patch)
MFC after:	1 week
2009-01-25 10:11:58 +00:00
Qing Li
82b334e80d The RTF_LLINFO was revived unconditionally, but within the kernel the
check on the sysctl argument value being RTF_LLINFO is conditioned on
the COMPAT_ROUTE_FLAGS kernel option. This mismatch caused the L2
table retrieval failure, and the arp/ndp -an command displays empty L2
tables.

Reviewed by:   pjd
2009-01-16 09:01:45 +00:00
Qing Li
14981d8057 Revive the RTF_LLINFO flag in route.h. The kernel code is guarded
by the new kernel option COMPAT_ROUTE_FLAGS for binary backward
compatibility. The RTF_LLDATA flag maps to the same value as RTF_LLINFO.
RTF_LLDATA is used by the arp and ndp utilities. The RTF_LLDATA flag is
always returned to the userland regardless whether the COMPAT_ROUTE_FLAGS
is defined.
2009-01-12 11:24:32 +00:00
Bjoern A. Zeeb
c2ded8aefb Rather than using the cred from curthread, take it from the thread
referenced in the sysctl req argument.

Reviewed by:	rwatson
MFC after:	2 weeks
2009-01-09 23:57:59 +00:00
Bjoern A. Zeeb
813dd6ae5e Restrict arp, ndp and theoretically the FIB listing (if not
read with libkvm) to the addresses of a prison, when inside a
jail. [1]
As the patch from the PR was pre-'new-arp', add checks to the
llt_dump handlers as well.

While touching RTM_GET in route_output(), consistently use
curthread credentials rather than the creds from the socket
there. [2]

PR:		kern/68189
Submitted by:	Mark Delany <sxcg2-fuwxj@qmda.emu.st> [1]
Discussed with:	rwatson [2]
Reviewed by:	rwatson
MFC after:	4 weeks
2009-01-09 21:57:49 +00:00
Bjoern A. Zeeb
ebda3fc380 Take the cred from curthread rather than curproc as curproc would need
locking but the credential from curthread (usually) never changes.

Discussed with:	jhb
MFC after:	2 weeks
2009-01-09 16:22:32 +00:00
Qing Li
8eca593c5a This checkin addresses a couple of issues:
1. The "route" command allows route insertion through the interface-direct
   option "-iface". During if_attach(), an sockaddr_dl{} entry is created
   for the interface and is part of the interface address list. This
   sockaddr_dl{} entry describes the interface in detail. The "route"
   command selects this entry as the "gateway" object when the "-iface"
   option is present. The "arp" and "ndp" commands also interact with the
   kernel through the routing socket when adding and removing static L2
   entries. The static L2 information is also provided through the
   "gateway" object with an AF_LINK family type, similar to what is
   provided by the "route" command. In order to differentiate between
   these two types of operations, a RTF_LLDATA flag is introduced. This
   flag is set by the "arp" and "ndp" commands when issuing the add and
   delete commands. This flag is also set in each L2 entry returned by the
   kernel. The "arp" and "ndp" command follows a convention where a RTM_GET
   is issued first followed by a RTM_ADD/DELETE. This RTM_GET request fills
   in the fields for a "rtm" object, which is reinjected into the kernel by
   a subsequent RTM_ADD/DELETE command. The entry returend from RTM_GET
   is a prefix route, so the RTF_LLDATA flag must be specified when issuing
   the RTM_ADD/DELETE messages.

2. Enforce the convention that NET_RT_FLAGS with a 0 w_arg is the
   specification for retrieving L2 information. Also optimized the
   code logic.

Reviewed by:   julian
2008-12-26 19:45:24 +00:00
Qing Li
6e6b3f7cbc This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
   possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
  the last piece of the puzzle, Kip has also been conducting
  active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
  provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
  me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
Andrew Thompson
a5a3926c11 Dont leak the rnh lock on error. 2008-12-13 22:41:36 +00:00
Kip Macy
9b20205d85 fix a reported panic when adding a route and one hit here when deleting a route
- pass RTF_RNH_LOCKED to rtalloc1_fib in 2 cases where the lock is held
- make sure the rnh lock is held across rt_setgate and rt_getifa_fib
2008-12-10 09:21:52 +00:00
Warner Losh
609ff41f16 Add missing include to sys/lock.h before sys/rwlock.h 2008-12-08 00:28:21 +00:00
Kip Macy
3120b9d428 - convert radix node head lock from mutex to rwlock
- make radix node head lock not recursive
 - fix LOR in rtexpunge
 - fix LOR in rtredirect

Reviewed by:	sam
2008-12-07 21:15:43 +00:00
Bjoern A. Zeeb
4b79449e2f Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by:	brooks, gnn, des, zec, imp
Sponsored by:	The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
Bjoern A. Zeeb
413628a7e3 MFp4:
Bring in updated jail support from bz_jail branch.

This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..

SCTP support was updated and supports IPv6 in jails as well.

Cpuset support permits jails to be bound to specific processor
sets after creation.

Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.

DDB 'show jails' command was added to aid debugging.

Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.

Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.

Bump __FreeBSD_version for the afore mentioned and in kernel changes.

Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
  and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
  help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
  suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
  on cluster machines as well as all the testers and people
  who provided feedback the last months on freebsd-jail and
  other channels.
- My employer, CK Software GmbH, for the support so I could work on this.

Reviewed by:	(see above)
MFC after:	3 months (this is just so that I get the mail)
X-MFC Before:   7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
Dag-Erling Smørgrav
1ede983cc9 Retire the MALLOC and FREE macros. They are an abomination unto style(9).
MFC after:	3 months
2008-10-23 15:53:51 +00:00
Marko Zec
8b615593fc Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by:	julian, bz, brooks, zec
Reviewed by:	julian, bz, brooks, kris, rwatson, ...
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
Bjoern A. Zeeb
603724d3ab Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
Robert Watson
4d896055ce Remove unused support for local and foreign addresses in generic raw
socket support.  These utility routines are used only for routing and
pfkey sockets, neither of which have a notion of address, so were
required to mock up fake socket addresses to avoid connection
requirements for applications that did not specify their own fake
addresses (most of them).

Quite a bit of the removed code is #ifdef notdef, since raw sockets
don't support bind() or connect() in practice.  Removing this
simplifies the raw socket implementation, and removes two (commented
out) uses of dtom(9).

Fake addresses passed to sendto(2) by applications are ignored for
compatibility reasons, but this is now done in a more consistent way
(and with a comment).  Possibly, EINVAL could be returned here in
the future if it is determined that no applications depend on the
semantic inconsistency of specifying a destination address for a
protocol without address support, but this will require some amount
of careful surveying.

NB: This does not affect netinet, netinet6, or other wire protocol
raw sockets, which provide their own independent infrastructure with
control block address support specific to the protocol.

MFC after:	3 weeks
Reviewed by:	bz
2008-07-09 15:48:16 +00:00
Robert Watson
59dd72d040 Remove NETISR_MPSAFE, which allows specific netisr handlers to be directly
dispatched without Giant, and add NETISR_FORCEQUEUE, which allows specific
netisr handlers to always be dispatched via a queue (deferred).  Mark the
usb and if_ppp netisr handlers as NETISR_FORCEQUEUE, and explicitly
acquire Giant in those handlers.

Previously, any netisr handler not marked NETISR_MPSAFE would necessarily
run deferred and with Giant acquired.  This change removes Giant
scaffolding from the netisr infrastructure, but NETISR_FORCEQUEUE allows
non-MPSAFE handlers to continue to force deferred dispatch so as to avoid
lock order reversals between their acqusition of Giant and any calling
context.

It is likely we will be able to remove NETISR_FORCEQUEUE once
IFF_NEEDSGIANT is removed, as non-MPSAFE usb and if_ppp drivers will no
longer be supported.

Reviewed by:	bz
MFC after:	1 month
X-MFC note:	We can't remove NETISR_MPSAFE from stable/7 for KPI reasons,
		but the rest can go back.
2008-07-04 00:21:38 +00:00
Julian Elischer
8b07e49a00 Add code to allow the system to handle multiple routing tables.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)

Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.

From my notes:

-----

  One thing where FreeBSD has been falling behind, and which by chance I
  have some time to work on is "policy based routing", which allows
  different
  packet streams to be routed by more than just the destination address.

  Constraints:
  ------------

  I want to make some form of this available in the 6.x tree
  (and by extension 7.x) , but FreeBSD in general needs it so I might as
  well do it in -current and back port the portions I need.

  One of the ways that this can be done is to have the ability to
  instantiate multiple kernel routing tables (which I will now
  refer to as "Forwarding Information Bases" or "FIBs" for political
  correctness reasons). Which FIB a particular packet uses to make
  the next hop decision can be decided by a number of mechanisms.
  The policies these mechanisms implement are the "Policies" referred
  to in "Policy based routing".

  One of the constraints I have if I try to back port this work to
  6.x is that it must be implemented as a EXTENSION to the existing
  ABIs in 6.x so that third party applications do not need to be
  recompiled in timespan of the branch.

  This first version will not have some of the bells and whistles that
  will come with later versions. It will, for example, be limited to 16
  tables in the first commit.
  Implementation method, Compatible version. (part 1)
  -------------------------------
  For this reason I have implemented a "sufficient subset" of a
  multiple routing table solution in Perforce, and back-ported it
  to 6.x. (also in Perforce though not  always caught up with what I
  have done in -current/P4). The subset allows a number of FIBs
  to be defined at compile time (8 is sufficient for my purposes in 6.x)
  and implements the changes needed to allow IPV4 to use them. I have not
  done the changes for ipv6 simply because I do not need it, and I do not
  have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.

  Other protocol families are left untouched and should there be
  users with proprietary protocol families, they should continue to work
  and be oblivious to the existence of the extra FIBs.

  To understand how this is done, one must know that the current FIB
  code starts everything off with a single dimensional array of
  pointers to FIB head structures (One per protocol family), each of
  which in turn points to the trie of routes available to that family.

  The basic change in the ABI compatible version of the change is to
  extent that array to be a 2 dimensional array, so that
  instead of protocol family X looking at rt_tables[X] for the
  table it needs, it looks at rt_tables[Y][X] when for all
  protocol families except ipv4 Y is always 0.
  Code that is unaware of the change always just sees the first row
  of the table, which of course looks just like the one dimensional
  array that existed before.

  The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
  are all maintained, but refer only to the first row of the array,
  so that existing callers in proprietary protocols can continue to
  do the "right thing".
  Some new entry points are added, for the exclusive use of ipv4 code
  called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
  which have an extra argument which refers the code to the correct row.

  In addition, there are some new entry points (currently called
  rtalloc_fib() and friends) that check the Address family being
  looked up and call either rtalloc() (and friends) if the protocol
  is not IPv4 forcing the action to row 0 or to the appropriate row
  if it IS IPv4 (and that info is available). These are for calling
  from code that is not specific to any particular protocol. The way
  these are implemented would change in the non ABI preserving code
  to be added later.

  One feature of the first version of the code is that for ipv4,
  the interface routes show up automatically on all the FIBs, so
  that no matter what FIB you select you always have the basic
  direct attached hosts available to you. (rtinit() does this
  automatically).

  You CAN delete an interface route from one FIB should you want
  to but by default it's there. ARP information is also available
  in each FIB. It's assumed that the same machine would have the
  same MAC address, regardless of which FIB you are using to get
  to it.

  This brings us as to how the correct FIB is selected for an outgoing
  IPV4 packet.

  Firstly, all packets have a FIB associated with them. if nothing
  has been done to change it, it will be FIB 0. The FIB is changed
  in the following ways.

  Packets fall into one of a number of classes.

  1/ locally generated packets, coming from a socket/PCB.
     Such packets select a FIB from a number associated with the
     socket/PCB. This in turn is inherited from the process,
     but can be changed by a socket option. The process in turn
     inherits it on fork. I have written a utility call setfib
     that acts a bit like nice..

         setfib -3 ping target.example.com # will use fib 3 for ping.

     It is an obvious extension to make it a property of a jail
     but I have not done so. It can be achieved by combining the setfib and
     jail commands.

  2/ packets received on an interface for forwarding.
     By default these packets would use table 0,
     (or possibly a number settable in a sysctl(not yet)).
     but prior to routing the firewall can inspect them (see below).
     (possibly in the future you may be able to associate a FIB
     with packets received on an interface..  An ifconfig arg, but not yet.)

  3/ packets inspected by a packet classifier, which can arbitrarily
     associate a fib with it on a packet by packet basis.
     A fib assigned to a packet by a packet classifier
     (such as ipfw) would over-ride a fib associated by
     a more default source. (such as cases 1 or 2).

  4/ a tcp listen socket associated with a fib will generate
     accept sockets that are associated with that same fib.

  5/ Packets generated in response to some other packet (e.g. reset
     or icmp packets). These should use the FIB associated with the
     packet being reponded to.

  6/ Packets generated during encapsulation.
     gif, tun and other tunnel interfaces will encapsulate using the FIB
     that was in effect withthe proces that set up the tunnel.
     thus setfib 1 ifconfig gif0 [tunnel instructions]
     will set the fib for the tunnel to use to be fib 1.

  Routing messages would be associated with their
  process, and thus select one FIB or another.
  messages from the kernel would be associated with the fib they
  refer to and would only be received by a routing socket associated
  with that fib. (not yet implemented)

  In addition Netstat has been edited to be able to cope with the
  fact that the array is now 2 dimensional. (It looks in system
  memory using libkvm (!)). Old versions of netstat see only the first FIB.

  In addition two sysctls are added to give:
  a) the number of FIBs compiled in (active)
  b) the default FIB of the calling process.

  Early testing experience:
  -------------------------

  Basically our (IronPort's) appliance does this functionality already
  using ipfw fwd but that method has some drawbacks.

  For example,
  It can't fully simulate a routing table because it can't influence the
  socket's choice of local address when a connect() is done.

  Testing during the generating of these changes has been
  remarkably smooth so far. Multiple tables have co-existed
  with no notable side effects, and packets have been routes
  accordingly.

  ipfw has grown 2 new keywords:

  setfib N ip from anay to any
  count ip from any to any fib N

  In pf there seems to be a requirement to be able to give symbolic names to the
  fibs but I do not have that capacity. I am not sure if it is required.

  SCTP has interestingly enough built in support for this, called VRFs
  in Cisco parlance. it will be interesting to see how that handles it
  when it suddenly actually does something.

  Where to next:
  --------------------

  After committing the ABI compatible version and MFCing it, I'd
  like to proceed in a forward direction in -current. this will
  result in some roto-tilling in the routing code.

  Firstly: the current code's idea of having a separate tree per
  protocol family, all of the same format, and pointed to by the
  1 dimensional array is a bit silly. Especially when one considers that
  there is code that makes assumptions about every protocol having the
  same internal structures there. Some protocols don't WANT that
  sort of structure. (for example the whole idea of a netmask is foreign
  to appletalk). This needs to be made opaque to the external code.

  My suggested first change is to add routing method pointers to the
  'domain' structure, along with information pointing the data.
  instead of having an array of pointers to uniform structures,
  there would be an array pointing to the 'domain' structures
  for each protocol address domain (protocol family),
  and the methods this reached would be called. The methods would have
  an argument that gives FIB number, but the protocol would be free
  to ignore it.

  When the ABI can be changed it raises the possibilty of the
  addition of a fib entry into the "struct route". Currently,
  the structure contains the sockaddr of the desination, and the resulting
  fib entry. To make this work fully, one could add a fib number
  so that given an address and a fib, one can find the third element, the
  fib entry.

  Interaction with the ARP layer/ LL layer would need to be
  revisited as well. Qing Li has been working on this already.

  This work was sponsored by Ironport Systems/Cisco

Reviewed by:    several including rwatson, bz and mlair (parts each)
Obtained from:  Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
Qing Li
e440aed958 This patch provides the back end support for equal-cost multi-path
(ECMP) for both IPv4 and IPv6. Previously, multipath route insertion
is disallowed. For example,

	route add -net 192.103.54.0/24 10.9.44.1
	route add -net 192.103.54.0/24 10.9.44.2

The second route insertion will trigger an error message of
"add net 192.103.54.0/24: gateway 10.2.5.2: route already in table"

Multiple default routes can also be inserted. Here is the netstat
output:

default		10.2.5.1	UGS	0	3074	bge0 =>
default		10.2.5.2	UGS	0	0	bge0

When multipath routes exist, the "route delete" command requires
a specific gateway to be specified or else an error message would
be displayed. For example,

	route delete default

would fail and trigger the following error message:

"route: writing to routing socket: No such process"
"delete net default: not in table"

On the other hand,

	route delete default 10.2.5.2

would be successful: "delete net default: gateway 10.2.5.2"

One does not have to specify a gateway if there is only a single
route for a particular destination.

I need to perform more testings on address aliases and multiple
interfaces that have the same IP prefixes. This patch as it
stands today is not yet ready for prime time. Therefore, the ECMP
code fragments are fully guarded by the RADIX_MPATH macro.
Include the "options  RADIX_MPATH" in the kernel configuration
to enable this feature.

Reviewed by:	robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
Robert Watson
237fdd787b In keeping with style(9)'s recommendations on macros, use a ';'
after each SYSINIT() macro invocation.  This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.

MFC after:	1 month
Discussed with:	imp, rink
2008-03-16 10:58:09 +00:00
Olivier Houchard
18b6e4c8d2 Do not set the RTF_GATEWAY flag if RTF_LLINFO is set, it doesn't make much
sense in that context, and leads to unusable routes.
This should unbreak bootpd.

Discussed with: glebius
Submitted by:   bms
Approved by:    re (bmah)
2007-09-08 19:28:45 +00:00
Gleb Smirnoff
5de558219a Fix regression in rev. 1.140.
Reported by:	Yuriy Tsibizov <Yuriy.Tsibizov gfk.ru>, bsam
2007-03-27 19:36:12 +00:00