Commit Graph

7776 Commits

Author SHA1 Message Date
Gleb Smirnoff
56d5e0967c Stop including if_var.h from userland.
Sponsored by:	Nginx, Inc.
2015-04-06 09:42:23 +00:00
Warren Block
487e821d89 Add articles, avoid use of "you", simplify a few sentences.
MFC after:	1 week
2015-04-02 13:51:06 +00:00
Xin LI
a2f9ce8a69 Constify.
Suggested by:	rdivacky
MFC after:	2 weeks
2015-03-31 19:12:13 +00:00
Xin LI
11500c4eaa Fix remaining warnings.
MFC after:	2 weeks
2015-03-27 18:23:06 +00:00
Xin LI
16945d8950 - Correct type for checkAgainst.
- Staticify flags that are not used outside the file scope.

PR:		bin/193471
Submitted by:	Robert Sprowson <webpages sprow.co.uk>
MFC after:	2 weeks
2015-03-26 22:34:27 +00:00
Alexander Motin
5523c82c1a Make GEOM_PART work in presence of previous withered self.
MFC after:	2 weeks
Sponsored by:	iXsystems, Inc.
2015-03-26 12:17:47 +00:00
Scott Long
d16528b2da Convert savecore to libxo. The 'verbose' paths still use printf since they're
meant for interactivity on the command line and contain a lot of redundant
information.

Obtained from:	Netflix, Inc.
2015-03-22 17:29:14 +00:00
Alexander Motin
e7affda584 Add camcontrol subcommands to control APM and AAM levels.
MFC after:	1 week
Sponsored by:	iXsystems, Inc.
2015-03-19 12:22:57 +00:00
Allan Jude
1596158c05 Document that nextboot(8) doesn't work as expected with ZFS
Differential Revision:	https://reviews.freebsd.org/D2087
Submitted by:	feld (request)
Reviewed by:	feld
Approved by:	bcr (mentor)
Sponsored by:	ScaleEngine Inc.
2015-03-17 20:15:49 +00:00
Alexander Motin
c0a3ee8450 Make ATA power management commands to work on SCSI HBAs via PASS THROUGH.
MFC after:	2 weeks
Sponsored by:	iXsystems, Inc.
2015-03-17 09:21:31 +00:00
Ian Lepore
93c3ad10f1 Fix minor fallout from sysctl strings being nulterminated now. The dmesg
code can read the buffer via sysctl or from a core file.  In the core file
case there will be no nulterm, and the code copes with that, but now in the
sysctl case there is a nulterm (there didn't used to be).  The least
disruptive way to restore the old behavior (and eliminate a spurious '\000'
at the end of the output) is to remove the nulterm (by decrementing the
buffer length) in the sysctl case.
2015-03-16 21:09:11 +00:00
Jilles Tjoelker
59966d51c6 restore: Preserve timestamps to the nanosecond.
The restore utility already knows the full-resolution timestamps, so the
only thing to do is to stop converting the timespecs to timevals and use
futimens() and utimensat().

Differential Revision:	https://reviews.freebsd.org/D2020
Reviewed by:	jhb
2015-03-14 13:45:43 +00:00
Andrey V. Elsukov
dc9fa19b3b Properly initialize scope zone id when next hop address stored
directly in the O_FORWARD_IP6 opcode. Use getnameinfo(3) to formatting
the IPv6 addresses of such opcodes.

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2015-03-13 13:46:50 +00:00
John Baldwin
07bf9879f3 Simplify string mangling in ifmaybeload().
- Use strlcpy() instead of strcpy().
- Use strlcat() instead of a strlcpy() with a magic number subtracted
  from the length.
- Replace strncmp(..., strlen(foo) + 1) with strcmp(...).

Differential Revision:	https://reviews.freebsd.org/D1814
Reviewed by:	rpaulo
MFC after:	2 weeks
2015-03-13 09:45:06 +00:00
Andrey V. Elsukov
2530ed9e70 Fix `ipfw fwd tablearg'. Use dedicated field nh4 in struct table_value
to obtain IPv4 next hop address in tablearg case.

Add `fwd tablearg' support for IPv6. ipfw(8) uses INADDR_ANY as next hop
address in O_FORWARD_IP opcode for specifying tablearg case. For IPv6 we
still use this opcode, but when packet identified as IPv6 packet, we
obtain next hop address from dedicated field nh6 in struct table_value.

Replace hopstore field in struct ip_fw_args with anonymous union and add
hopstore6 field. Use this field to copy tablearg value for IPv6.

Replace spare1 field in struct table_value with zoneid. Use it to keep
scope zone id for link-local IPv6 addresses. Since spare1 was used
internally, replace spare0 array with two variables spare0 and spare1.

Use getaddrinfo(3)/getnameinfo(3) functions for parsing and formatting
IPv6 addresses in table_value. Use zoneid field in struct table_value
to store sin6_scope_id value.

Since the kernel still uses embedded scope zone id to represent
link-local addresses, convert next_hop6 address into this form before
return from pfil processing. This also fixes in6_localip() check
for link-local addresses.

Differential Revision:	https://reviews.freebsd.org/D2015
Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2015-03-13 09:03:25 +00:00
Andrey V. Elsukov
4fb4ebe0a4 Add GUID and alias for Apple Core Storage partition.
PR:		196241
MFC after:	1 week
2015-03-12 18:51:31 +00:00
Hiroki Sato
23e9ffb0e1 - Implement loopback probing state in enhanced DAD algorithm.
- Add no_dad and ignoreloop per-IF knob.  no_dad disables DAD completely,
  and ignoreloop is to prevent infinite loop in loopback probing state when
  loopback is permanently expected.
2015-03-05 21:27:49 +00:00
Edward Tomasz Napierala
5e252f6402 Make the "automounted" flag work for FUSE filesystems.
PR:		192852
Submitted by:	taku at tackymt.homeip.net (earlier version)
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-03-01 18:26:26 +00:00
Andrey V. Elsukov
771d671beb When gpart(8) is trying automatically determine the first available
block of free space after existing partition, take into account
provider's stripeoffset, since the result will be adjusted to this
value.

PR:		197989
MFC after:	1 week
2015-02-26 15:59:45 +00:00
Kenneth D. Merry
e8577fb489 Make sure that the flags for the XPT_DEV_ADVINFO CCB are initialized
properly.

If there is garbage in the flags field, it can sometimes include a
set CDAI_FLAG_STORE flag, which may cause either an error or
perhaps result in overwriting the field that was intended to be
read.

sys/cam/cam_ccb.h:
	Add a new flag to the XPT_DEV_ADVINFO CCB, CDAI_FLAG_NONE,
	that callers can use to set the flags field when no store
	is desired.

sys/cam/scsi/scsi_enc_ses.c:
	In ses_setphyspath_callback(), explicitly set the
	XPT_DEV_ADVINFO flags to CDAI_FLAG_NONE when fetching the
	physical path information.  Instead of ORing in the
	CDAI_FLAG_STORE flag when storing the physical path, set
	the flags field to CDAI_FLAG_STORE.

sys/cam/scsi/scsi_sa.c:
	Set the XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE when
	fetching extended inquiry information.

sys/cam/scsi/scsi_da.c:
	When storing extended READ CAPACITY information, set the
	XPT_DEV_ADVINFO flags field to CDAI_FLAG_STORE instead of
	ORing it into a field that isn't initialized.

sys/dev/mpr/mpr_sas.c,
sys/dev/mps/mps_sas.c:
	When fetching extended READ CAPACITY information, set the
	XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE instead of
	setting it to 0.

sbin/camcontrol/camcontrol.c:
	When fetching a device ID, set the XPT_DEV_ADVINFO flags
	field to CDAI_FLAG_NONE instead of 0.

sys/sys/param.h:
	Bump __FreeBSD_version to 1100061 for the new XPT_DEV_ADVINFO
	CCB flag, CDAI_FLAG_NONE.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-02-18 18:30:19 +00:00
John-Mark Gurney
7582000531 add support for specifying an initial buffer size when fetching a
sysctl... This is useful for kern.arandom which (without -B) will
happily return 0 bytes, which isn't too useful or random...

fix spelling (thanks igor!) of settable while I'm here...
2015-02-13 01:20:37 +00:00
Alexander V. Chernikov
5d43946785 Retrieve counters from kernel if rule timstamping is requested.
PR:		kern/197271
Submitted by:	lev
Sponsored by:	Yandex LLC
2015-02-05 14:08:33 +00:00
Vsevolod Stakhov
976e494514 Revert the change of flowid output format. [1]
Reverse the sorting order of the interfaces addresses familise so it should be
the same as getifaddrs(3) order. [2]

Suggested by:	hrs [1], bz [2]
Approved by:	hrs, bapt
2015-02-02 19:00:18 +00:00
Vsevolod Stakhov
07a51db9e2 Style(9) fixes.
Approved by:	bapt, ae
X-MFC-With:	r278080
2015-02-02 14:37:45 +00:00
Vsevolod Stakhov
35c73e51cc Reorganize the list of addresses associated with an interface and group them
based on the address family. This should help to recognize interfaces with
multiple AF (e.g. ipv4 and ipv6) with many aliases or additional addresses. The
order of addresses inside a single group is strictly preserved.

Improve the scope_id output for AF_INET6 families, as the
current approach uses hexadecimal string that is basically the ID of an
interface, whilst this information is already depicted by getnameinfo(3) call.
Therefore, now ifconfig just prints the scope of address as it is defined in
2.4 of RFC 2373.

PR:		197270
Approved by:	bapt
MFC after:	2 weeks
2015-02-02 13:03:04 +00:00
Enji Cooper
87d352d5c6 Remove duplicate MK_ISCSI block and sort the conditional blocks so this error
won't crop up again in the future

Reported by: gjb
MFC after: 1 week
2015-02-02 10:31:35 +00:00
Edward Tomasz Napierala
da8e209f33 Fix sysctl name.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-01-27 18:27:07 +00:00
Enji Cooper
c01f300b7f Build sbin/iscontrol again if MK_ISCSI != no
MFC after: 13 days
X-MFC with: r277675
Pointyhat to: me
2015-01-26 06:29:07 +00:00
Enji Cooper
4e39505449 Add MK_HAST knob for building and installing hastd(8), et al
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2015-01-26 06:27:07 +00:00
John Baldwin
2aa533b91d natd(8) will work with an unconfigured interface and effectively not do
anything until the interface is assigned an address.  This fixes
ipfw_nat to do the same by using an IP of INADDR_ANY instead of
aborting the nat setup if the requested interface is not yet configured.

Differential Revision:	https://reviews.freebsd.org/D1539
Reviewed by:	melifaro, glebius, gnn
MFC after:	1 week
2015-01-25 20:37:32 +00:00
Enji Cooper
18cc317233 Add MK_CCD knob for building and installing ccd(4), ccdconfig, etc
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2015-01-25 04:52:48 +00:00
Enji Cooper
b29d6977f3 Add MK_ISCSI knob for building the iscsi initiator, iscsi daemon, kernel
modules, etc

MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2015-01-25 04:20:11 +00:00
Enji Cooper
60e03a568c Fix building rcorder with -DDEBUG by using libutil.h instead of util.h from
usr.bin/make

MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
2015-01-25 03:08:21 +00:00
Enji Cooper
9a1f476703 - Revert r277670 (#include order is required for fparseln)
- Remove unnecessary CFLAGS+= -I now that make is no longer required to make
  rcorder build
2015-01-25 03:02:29 +00:00
Enji Cooper
6251a2629c Sort #include order 2015-01-25 02:30:44 +00:00
Enji Cooper
bfd71a93e3 MFhead @ r277659 2015-01-24 21:21:39 +00:00
Andrey V. Elsukov
ffc610b221 After r270929 RAW IP code assumes that all IP fields are in network
byte order. Fix ping(8) to pass an IP header with converted ip_off
and ip_len fields, when IP_HDRINCL socket option used.
2015-01-23 13:26:35 +00:00
Enji Cooper
51dd214c84 MFhead @ r277403 2015-01-19 22:18:00 +00:00
Alexander V. Chernikov
69c4b56a74 Eliminate incorrect IPv6 mask guessing:
RFC 2374 concept of 'IPv6 Aggregatable Global Unicast Address Format' was
deprecated by RFC 3587 12 years ago.

Before:

15:06 [1] edge# netstat -rn6 | grep 2a02:6b8::
2a02:6b8::/32                     2a02:978:2::1                 UGS         em0
15:06 [1] edge# route -6n get 2a02:6b8::
route: writing to routing socket: No such process

After:
15:07 [1] edge# /usr/obj/usr/src/sbin/route/route -n6 get 2a02:6b8::
   route to: 2a02:6b8::
destination: 2a02:6b8::
       mask: ffff:ffff::
    gateway: 2a02:978:2::1
        fib: 0
  interface: em0
      flags: <UP,GATEWAY,DONE,STATIC>
 recvpipe  sendpipe  ssthresh  rtt,msec    mtu        weight    expire
       0         0         0         0      1500         1         0

MFC after:	2 weeks
2015-01-16 11:17:30 +00:00
Edward Tomasz Napierala
01de1a0650 Add devd(8) notifications for creation and destruction of GEOM devices.
Differential Revision:	https://reviews.freebsd.org/D1211
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-01-14 11:15:57 +00:00
Kenneth D. Merry
a1736be349 Improve camcontrol(8) handling of drive defect data.
This includes a new summary mode (-s) for camcontrol defects that
quickly tells the user the most important thing: how many defects
are in the requested list.  The actual location of the defects is
less important.

Modern drives frequently have more than the 8191 defects that can
be reported by the READ DEFECT DATA (10) command.  If they don't
have that many grown defects, they certainly have more than 8191
defects in the primary (i.e. factory) defect list.

The READ DEFECT DATA (12) command allows for longer parameter
lists, as well as indexing into the list of defects, and so allows
reporting many more defects.

This has been tested with HGST drives and Seagate drives, but
does not fully work with Seagate drives.  Once I have a Seagate
spec I may be able to determine whether it is possible to make it
work with Seagate drives.

scsi_da.h:	Add a definition for the new long block defect
		format.

		Add bit and mask definitions for the new extended
		physical sector and bytes from index defect
		formats.

		Add a prototype for the new scsi_read_defects() CDB
		building function.

scsi_da.c:	Add a new scsi_read_defects() CDB building function.
		camcontrol(8) was previously composing CDBs manually.
		This is long overdue.

camcontrol.c:	Revamp the camcontrol defects subcommand.  We now
		go through multiple stages in trying to get defect
		data off the drive while avoiding various drive
		firmware quirks.

		We start off by requesting the defect header with
		the 10 byte command.  If we're in summary mode (-s)
		and the drive reports fewer defects than can be
		represented in the 10 byte header, we're done.
		Otherwise, we know that we need to issue the
		12 byte command if the drive reports the maximum
		number of defects.

		If we're in summary mode, we're done if we get a
		good response back when asking for the 12 byte header.

		If the user has asked for the full list, then we
		use the address descriptor index field in the 12
		byte CDB to step through the list in 64K chunks.
		64K is small enough to work with most any ancient
		or modern SCSI controller.

		Add support for printing the new long block defect
		format, as well as the extended physical sector and
		bytes from index formats.  I don't have any drives
		that support the new formats.

		Add a hexadecimal output format that can be turned
		on with -X.

		Add a quiet mode (-q) that can be turned on with
		the summary mode (-s) to just print out a number.

		Revamp the error detection and recovery code for
		the defects command to work with HGST drives.

		Call the new scsi_read_defects() CDB building
		function instead of rolling the CDB ourselves.

		Pay attention to the residual from the defect list
		request when printing it out, so we don't run off
		the end of the list.

		Use the new scsi_nv library routines to convert
		from strings to numbers and back.

camcontrol.8:	Document the new defect formats (longblock, extbfi,
		extphys) and command line options (-q, -s, -S and
		-X) for the defects subcommand.

		Explain a little more about what drives generally
		do and don't support.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-01-08 16:58:40 +00:00
Warner Losh
a91275f72f Remove old ioctl use and support, once and for all. 2015-01-06 05:28:37 +00:00
Enji Cooper
b219c275cc Integrate sbin/ifconfig/tests from NetBSD into atf/kyua
Sponsored by: EMC / Isilon Storage Division
2015-01-04 22:25:16 +00:00
Joel Dahl
f636caf195 mdoc: paragraph improvements. 2015-01-04 12:49:24 +00:00
Dag-Erling Smørgrav
e331584127 Belatedly commit the patch for SA-14:21 to head. It was not committed to
head at the time because it's a band-aid, rather than a complete fix, but
the complete fix never materialized.
2015-01-03 01:52:06 +00:00
Enji Cooper
a4ed727666 MFhead @ r276594 2015-01-02 23:27:16 +00:00
Joel Dahl
f7e00d4bbd mdoc: remove EOL whitespace. 2014-12-29 13:50:59 +00:00
Joel Dahl
c09eb46601 mdoc: improvements to SEE ALSO. 2014-12-27 08:22:58 +00:00
Enji Cooper
afbe8aa46f MFhead @ r275911 (also, sort out MK_* flags in BMAKE, etc on this branch) 2014-12-18 18:46:08 +00:00
Gleb Kurtsou
9b33705411 Adjust printf format specifiers for dev_t and ino_t in user space.
ino_t and dev_t are about to become uint64_t.

Reviewed by:	kib, mckusick
2014-12-17 07:10:48 +00:00