of the CDDL licence explicitly requires every Contributor to add
a copyright notice.
This also reflects the copyright notices for the changes recently
added by Illumos.
MFC after: 3 days
interfaces. A host route has a NULL mask so check for that condition.
I have also been told by developers who customize the packet output
path with direct manipulation of the route entry (or the outgoing
interface to be specific). This patch checks for the route mask
explicitly to make sure custom code will not panic.
PR: kern/161805
MFC after: 3 days
masked out when adding a prefix route through the "route" command.
However, when deleting the route, simply changing the command keyword
from "add" to "delete" does not work. The failoure is observed in
both IPv4 and IPv6 route insertion. The patch makes the route command
behavior consistent between the "add" and the "delete" operation.
MFC after: 1 week
handler such that driver can announce interface capabilities and
can do its own MII attach. Currently all USB ethernet controllers
have no way to establish a link with pause capabilities. Lack of
checksum offloading support also was one of reason to bring this
change in.
This change adds a couple of wrappers to USB ethernet drivers
(uether_ifmedia_upd, uether_init and uether_start). All exported
functions in uether has prefix uether_ so I think it's more
consistent to have wrappers that follow the convention.
This change preserves ABI/KPI so it should be safe to merge this
change to stable/8.
While I'm here add missing __FBSDID and clean up headers.
Reviewed by: hselasky
controller which is found on ULi M1563 South Bridge & M1689 Bridge.
These controllers look like a tulip clone.
M5263 controller does not support MII bitbang so use DC_ROM
register to access MII registers. Like other tulip variants, ULi
controller uses a setup frame to configure RX filter and uses new
setup frame format. It's not clear to me whether the controller
supports a hash based multicast filtering so this patch uses 14
perfect multicast filter to filter multicast frames. If number of
multicast addresses is greater than 14, controller is put into a
mode that receives all multicast frames.
Due to lack of access to M5261, this change was not tested with
M5261 but it probably works. Many thanks to Marco who provided
remote access to M5263.
Tested by: Marco Steinbach <coco <> executive-computing dot de>,
Martin MATO <martin.mato <> orange dot fr>
link such that calling dc_setcfg() right after media change would
be meaningless unless controller in question is not Davicom DM9102.
Ideally dc_setcfg() should be called when speed/duplex is resolved
otherwise it would reprogram controller with wrong speed/duplex
information. Because MII status change callback already calls
dc_setcfg() I think calling dc_setcfg() in dc_init_locked() is
wrong. For instance, it would take some time to establish a link
after mii_mediachg(), so blindly calling dc_setcfg() right after
mii_mediachg() will always yield wrong media configuration.
Extend dc_ifmedia_upd() to handle media change and still allow
21143 and Davidcom controllers program speed/duplex regardless of
current resolved speed/duplex of link. In theory 21143 may not need
to call dc_setcfg() right after media change, but leave it as it is
because there are too many variants to test that change. Probably
dc(4) shall need a PHY reset in dc_ifmedia_upd() but it's hard to
verify correctness of the change.
This change reliably makes ULi M5263 establish a link.
While I'm here correctly report media change result. Previously it
always reported a success.
failure (the getnewvnode cannot return an error). In this case, the
null_insmntque_dtr() already unlocked the reclaimed vnode, so VOP_UNLOCK()
in the nullfs_mount() after null_nodeget() failure is wrong.
Tested by: pho
MFC after: 1 week
- for the legacy PCI ATA channels move channel number out of the device
description, same as it is for ahci(4), siis(4) and mvs(4);
- add device description for the ISA ATA channels.
where the driver assumed that BA resources are still available due to
net80211 saying so.
PR: 161407, 159768
Tested by: cperciva, rene
MFC after: 3 days
It is possible for file systems with 'mountpoint' preperty set to 'legacy'
or 'none' - we don't have to change mount directory for them.
Currently such file systems are unmounted on rename and not even mounted back.
This introduces layering violation, as we need to update 'f_mntfromname'
field in statfs structure related to mountpoint (for the dataset we are
renaming and all its children).
In my opinion it is worth it, as it allow to update FreeBSD in even cleaner
way - in ZFS-only configuration root file system is ZFS file system with
'mountpoint' property set to 'legacy'. If root dataset is named system/rootfs,
we can snapshot it (system/rootfs@upgrade), clone it (system/oldrootfs),
update FreeBSD and if it doesn't boot we can boot back from system/oldrootfs
and rename it back to system/rootfs while it is mounted as /. Before it was
not possible, because unmounting / was not possible.
MFC after: 2 weeks
This restores the previous behaviour. While here, match '?' and '.'
inputs exactly and improve the error message.
Requested by: avg@
Derived from a patch by: Arnaud Lacombe <lacombar@gmail.com>
of scheduling next run pfsync_bulk_update(), pfsync_bulk_fail()
was scheduled.
This lead to instant 100% state leak after first bulk update
request.
- After above fix, it appeared that pfsync_bulk_update() lacks
locking. To fix this, sc_bulk_tmo callout was converted to an
mtx one. Eventually, all pf/pfsync callouts should be converted
to mtx version, since it isn't possible to stop or drain a
non-mtx callout without risk of race.
- Add comment that callout_stop() in pfsync_clone_destroy() lacks
locking. Since pfsync0 can't be destroyed (yet), let it be here.
The root of problem is re-locking at the end of pfsync_sendout().
Several functions are calling pfsync_sendout() holding pointers
to pf data on stack, and these functions expect this data to be
consistent.
To fix this, the following approach was taken:
- The pfsync_sendout() doesn't call ip_output() directly, but
enqueues the mbuf on sc->sc_ifp's interfaces queue, that
is currently unused. Then pfsync netisr is scheduled. PF_LOCK
isn't dropped in pfsync_sendout().
- The netisr runs through queue and ip_output()s packets
on it.
Apart from fixing race, this also decouples stack, fixing
potential issues, that may happen, when sending pfsync(4)
packets on input path.
Reviewed by: eri (a quick review)
o Detect when Boot Camp is enabled (i.e. the MBR mirrors the GPT).
o When Boot Camp is enabled, update the MBR whenever we write the GPT.
o Creation of a Boot Camp enabled GPT is not supported.
o Automatically disable Boot Camp when the GPT has been changed so that
there's either no EFI partition or no HFS+ partition.
o The first 4 partitions (by index) get mirrored in the MBR.
Requested by, discussed with and tested by: kris@pcbsd.org
MFC after: 1 week
number of packets can be queued on sc, while we are in ip_output(), and then
we wipe the accumulated sc_len. On next pfsync_sendout() that would lead to
writing beyond our mbuf cluster.
This allows to see processes I/O activity in 'top -m io' output.
PR kern/156218
Reported by: Marcus Reid <marcus@blazingdot.com>
Patch by: avg
MFC after: 3 days
According to POSIX, these two header files should be able to be included
by themselves, not depending on other headers. The <net/if.h> header
uses struct sockaddr when __BSD_VISIBLE=1, while <netinet/tcp.h> uses
integer datatypes (u_int32_t, u_short, etc).
MFC after: 2 months
implement a deprecated FPU control interface in addition to the
standard one. To make this clearer, further deprecate ieeefp.h
by not declaring the function prototypes except on architectures
that implement them already.
Currently i386 and amd64 implement the ieeefp.h interface for
compatibility, and for fp[gs]etprec(), which doesn't exist on
most other hardware. Powerpc, sparc64, and ia64 partially implement
it and probably shouldn't, and other architectures don't implement it
at all.
- Decompress assembled gang block data if compressed.
- Verify checksum of a gang header.
- Verify checksum of assembled gang block data.
- Verify checksum of uber block.
Submitted by: avg
MFC after: 3 days
physical block size declared in bp may not always be what we want.
For example in case of gang block header physical block size declared
in bp is much larger than SPA_GANGBLOCKSIZE (512 bytes) and checksum
calculation failed. This bug could lead to accessing unallocated
memory and resets/failures during boot.
MFC after: 3 days
handled by lower layers like vdev_raidz, which uses bp for checksum
verification. This bug could lead to NULL pointer reference and resets
during boot.
MFC after: 3 days
to document where we are expecting to be called with a lock held to
more easily catch unnoticed code paths.
This does not neccessarily improve locking in pfsync, it just tries
to avoid the panics reported.
PR: kern/159390, kern/158873
Submitted by: pluknet (at least something that partly resembles
my patch ignoring other cleanup, which I only saw
too late on the 2nd PR)
MFC After: 3 days
and virtualization it is not helpful but complicates things.
Current state of art is to not virtualize these kinds of locks -
inp_group/hash/info/.. are all not virtualized either.
MFC after: 3 days
