- In a PF_LOCAL address, "hostname" must begins with '/' and "servname"
is always NULL. All of ai_flags are ignored.
- PF_UNSPEC matches PF_LOCAL. EAI_SERVICE is not returned to make
AF-independent programming easier; "servname" is always ignored
in PF_LOCAL. In practice, PF_INET* and PF_LOCAL are
mutually-exclusive because a hostname which begins with '/' is invalid
in PF_INET*. No domain name resolution is performed for a PF_LOCAL address.
Differential Revision: https://reviews.freebsd.org/D3634
Note that the mountlist manipulations are somewhat fragile, and not very
pretty. The reason for this is to avoid changing vfs_mountroot(), which
is (obviously) rather mission-critical, but not very well documented,
and thus hard to test properly. It might be possible to rework it to use
its own simple root mount mechanism instead of vfs_mountroot().
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2698
This silence a warning brought up by valgrind whenever if_nametoindex
is used. This was already discussed in PR 166483, but the code
committed in r234329 guards the initilization with #ifdef PURIFY.
Therefore, valgrind still complains. Since this code is not performance
critical, always zero out the local variable to silence valgrind.
PR: 166483
Discussed with: eadler@
MFC after: 4 weeks
calling thread is supposed to see accesses issued by the initializer.
This means that the read of the once_control->state variable should
have an acquire semantic. Use atomic_thread_fence_acq() when the
value read is ONCE_DONE, instead of straightforward atomic_load_acq(),
to only put a barrier when needed (*).
On the other hand, the updates of the once_control->state with the
intermediate progress state do not need to synchronize with other
state accesses, remove _acq suffix.
Reviewed by: alc (previous version)
Suggested by: alc (*)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Coredump notes depend on being able to invoke dump routines twice; once
in a dry-run mode to get the size of the note, and another to actually
emit the note to the corefile.
When a note helper emits a different length section the second time
around than the length it requested the first time, the kernel produces
a corrupt coredump.
NT_PROCSTAT_FILES output length, when packing kinfo structs, is tied to
the length of filenames corresponding to vnodes in the process' fd table
via vn_fullpath. As vnodes may move around during dump, this is racy.
So:
- Detect badly behaved notes in putnote() and pad underfilled notes.
- Add a fail point, debug.fail_point.fill_kinfo_vnode__random_path to
exercise the NT_PROCSTAT_FILES corruption. It simply picks random
lengths to expand or truncate paths to in fo_fill_kinfo_vnode().
- Add a sysctl, kern.coredump_pack_fileinfo, to allow users to
disable kinfo packing for PROCSTAT_FILES notes. This should avoid
both FILES note corruption and truncation, even if filenames change,
at the cost of about 1 kiB in padding bloat per open fd. Document
the new sysctl in core.5.
- Fix note_procstat_files to self-limit in the 2nd pass. Since
sometimes this will result in a short write, pad up to our advertised
size. This addresses note corruption, at the risk of sometimes
truncating the last several fd info entries.
- Fix NT_PROCSTAT_FILES consumers libutil and libprocstat to grok the
zero padding.
With suggestions from: bjk, jhb, kib, wblock
Approved by: markj (mentor)
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3548
the buffer. (n == hostlen) also means the buffer length was
too short.
- Use sdl->sdl_data only when (sdl->sdl_nlen > 0 && sdl->sdl_alen == 0)
to prevent redundant output.
Connect it to the build.
The code assumed that SCHED_* constants form a contiguous set of
numbers, remove the assumption by using schedulers[] array in
get_different_scheduler(). This is no-op on FreeBSD, but improves
code portability.
The selection of different priority used the min/max priority range of
the current scheduler class, instead of the priority to be changed to.
The bug caused the test failure.
Remove duplication of POSIX_SPAWN_SETSIGDEF flag and now unused
duplications of MIN/MAX definitions.
Reviewed by: jilles, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3533
comment above, POSIX_SPAWN_SETSIGMASK and POSIX_SPAWN_SETSIGDEF
handlers used libthr interposed functions instead of syscalls.
Noted by: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 6 days
are aliases for the syscall stubs and are plt-interposed, to the
libc-private aliases of internally interposed sigprocmask() etc.
Since e.g. _sigaction is not interposed by libthr, calling signal()
removes thr_sighandler() from the handler slot etc. The result was
breaking signal semantic and rtld locking.
The added __libc_sigprocmask and other symbols are hidden, they are
not exported and cannot be called through PLT. The setjmp/longjmp
functions for x86 were changed to use direct calls, and since
PIC_PROLOGUE only needed for functional PLT indirection on i386, it is
removed as well.
The PowerPC bug of calling the syscall directly in the setjmp/longjmp
implementation is kept as is.
Reported by: Pete French <petefrench@ingresso.co.uk>
Tested by: Michiel Boland <boland37@xs4all.nl>
Reviewed by: jilles (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Go ahead and defined -D_STANDALONE for all targets (only strictly
needed for some architecture, but harmless on those it isn't required
for). Also add -msoft-float to all architectures uniformly rather
that higgley piggley like it is today.
Differential Revision: https://reviews.freebsd.org/D3496
- in mbrtowc() we need to disallow codepoints above 0x10ffff.
- In wcrtomb() we need to disallow codepoints between 0xd800 and 0xdfff.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D3399
adjusted. This seems to be the case on all non-x86 architectures libproc
supports.
Reviewed by: kib
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3465
having some children, the children' reaper is not reset to the parent.
This allows for the situation where reaper has children but not
descendands and the too strict asserts in the reap_status() fire.
Remove the wrong asserts, add some clarification for the situation to
the procctl(2) REAP_STATUS.
Reported and tested by: feld
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
missing until it can be cleaned up.
Reviewed by: jhb
Approved by: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3319
Distinguish between WRDE_BADVAL and WRDE_SYNTAX based on when the error
occurred (parsing or execution), not based on whether WRDE_UNDEF was passed.
Also, return WRDE_NOSPACE for a few more unexpected results from sh.
- Remove the redundant _PATH_RSH definition (paths.h at r96194);
- Use pid_t for PIDs
- Note that we are at the same level of OpenBSD's counterpart of
revision 1.7 (r94757).
No functional changes.
MFC after: 2 weeks
Each issue has a PR open to track. This workaround allows us to run the
tests to investigate the failures and avoid any new regressions.
PR: 202304, 202305, 202307
Reviewed by: ngie
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3378
The functionality of the wordexp builtin is easily replaced using normal
shell code, although performance is slightly worse.
This does not mean that wordexp() will remain shell-independent -- a fully
reliable implementation of WRDE_NOCMD is really only possible using
extensions to the shell, or by adding much of the shell's code to libc.
- Add
nvlist_{add,get,take,move,exists,free}_{number,bool,string,nvlist,
descriptor} functions.
- Add support for (un)packing arrays.
- Add the nvl_array_next field to the nvlist structure.
If an array is added by the nvlist_{move,add}_nvlist_array function
this field will contains next element in the array.
- Add the nitems field to the nvpair and nvpair_header structure.
This field contains number of elements in the array.
- Add special flag (NV_FLAG_IN_ARRAY) which is set if nvlist is a part of
an array.
- Add special type (NV_TYPE_NVLIST_ARRAY_NEXT).This type is used only
on packing/unpacking.
- Add new API for traversing arrays (nvlist_get_array_next).
- Add the nvlist_get_pararr function which combines the
nvlist_get_array_next and nvlist_get_parent functions. If nvlist is in
the array it will return next element from array. If nvlist is last
element in array or it isn't in array it will return his
container (parent). This function should simplify traveling over nvlist.
- Add tests for new features.
- Add documentation for new functions.
- Add my copyright.
- Regenerate the sys/cddl/compat/opensolaris/sys/nvpair.h file.
PR: 191083
Reviewed by: allanjude (doc)
Approved by: pjd (mentor)
The comment in the libc/sys symbol map referenced the generated symbols
for the syscall trampolines. Such comment was out of place in the secure
symbol map so remove the stale comment and attempt to clarify the old one
to avoid risks of confusion.
Pointed out by: kib
As part of the code refactoring to support FORTIFY_SOURCE we want
a new subdirectory "secure" to keep the files related to security.
Move the stack protector functions to this new directory.
No functional change.
Differential Review: https://reviews.freebsd.org/D3333
as well as when it was removed from POSIX specification.
Reviewed by: theraven, wblock, bapt, rodrigc
Approved by: bapt, rodrigc (mentor)
Differential Revision: D3374
The option was added only to ease the transition from GNU Binutils to
ELF Tool Chain tools, and that process is now complete (for the viable
replacements). Noting the removal in UPDATING is sufficient as we have
not shipped a release with the option.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3240
Fix some phrases to make it more clear.
Differential Revision: D3378
Reported by: bde@
Reviewed by: wblock
Approved by: bapt, rodrigc (mentor)
Sponsored by: gandi.net
POSIX.1-2001 and removed from the specification in POSIX.1-2008.
New softwares shall use memcpy(3) or memmove(3).
Differential Revision: D3358
Reviewed by: wblock
Approved by: rodrigc
Sponsored by: gandi.net
avoids recursion into rtld when leaving libthr critical section for
the deferred signal delivery.
For the same reason, use syscall(2) instead of referencing
__sys_sigreturn(2). Syscall() is already pre-resolved for fork()
interceptor.
Tested by: Andre Meiser <ortadur@web.de>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In fact, it doesn't even work with single-byte codesets like ISO-8859-1.
The comparison blows up at index 128 (the range is 0 to UCHAR_MAX (255).
As a temporary workaround, all comparisons will be done in C locale
regardless of the environment setting. The regex library needs to be
updated to handle all codesets.
Obtained from: Dragonfly
packed LC_COLLATE binary formats. These were generated with the colldef
tool, but the new LC_COLLATE files are going to be generated by the new
localedef tool using CLDR POSIX files as input. The BSD-flavored
version of localedef identifies the format as "BSD 1.0". Any
LC_COLLATE file with a different version will simply not be loaded, and
all LC* categories will get set to "C" (aka "POSIX") locale.
This work is based off of Nexenta's contribution to Illumos.
The integration with xlocale is John Marino's work for Dragonfly.
The following commits will enable localedef tool, disable the colldef
tool, add generated colldef directory, and finally remove colldef from
base.
The only difference with Dragonfly are:
- a few fixes to build with clang
- And identification of the flavor as "BSD 1.0" instead of "Dragonfly 4.4"
Obtained from: Dragonfly
LLVM PR 24343. This fixes the graphics/png build on i386, which
otherwise failed during its tests because of floating point exceptions,
leading to >5000 skipped other ports.
Clang emits SSE instructions on amd64 in the common path of
pthread_mutex_unlock. If the thread does not otherwise use SSE,
this usage incurs a context-switch of the FPU/SSE state, which
reduces the performance of multiple real-world applications by a
non-trivial amount (3-5% in one application).
Instead of this change, I experimented with eagerly switching the
FPU state at context-switch time. This did not help. Most of the
cost seems to be in the read/write of memory--as kib@ stated--and
not in the #NM handling. I tested on machines with and without
XSAVEOPT.
One counter-argument to this change is that most applications already
use SIMD, and the number of applications and amount of SIMD usage
are only increasing. This is absolutely true. I agree that--in
general and in principle--this change is in the wrong direction.
However, there are applications that do not use enough SSE to offset
the extra context-switch cost. SSE does not provide a clear benefit
in the current libthr code with the current compiler, but it does
provide a clear loss in some cases. Therefore, disabling SSE in
libthr is a non-loss for most, and a gain for some.
I refrained from disabling SSE in libc--as was suggested--because
I can't make the above argument for libc. It provides a wide variety
of code; each case should be analyzed separately.
https://lists.freebsd.org/pipermail/freebsd-current/2015-March/055193.html
Suggestions from: dim, jmg, rpaulo
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell Inc.
It looks like EVFILT_READ and EVFILT_WRITE trigger under the same
conditions as poll()'s POLLRDNORM and POLLWRNORM as described by POSIX.
The only difference is that POLLRDNORM has to be triggered on regular
files unconditionally, whereas EVFILT_READ only triggers when not EOF.
Introduce a new flag, NOTE_FILE_POLL, that can be used to make
EVFILT_READ and EVFILT_WRITE behave identically to poll(). This flag
will be used by cloudlibc's poll() function.
Reviewed by: jmg
Differential Revision: https://reviews.freebsd.org/D3303
of the timehands, from the kern_tc.c implementation to vdso. Add
comments giving hints where to look for the algorithm explanation.
To compensate the removal of rmb() in userspace binuptime(), add
explicit lfence instruction before rdtsc. On i386, add usual
complications to detect SSE2 presence; assume that old CPUs which do
not implement SSE2 also execute rdtsc almost in order.
Reviewed by: alc, bde (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Summary:
Back in 2005, maxim@ attempted to fix shutdown() to return ENOTCONN in case the socket was not connected (r150152). This had to be rolled back (r150155), as it broke some of the existing programs that depend on this behavior. I reapplied this change on my system and indeed, syslogd failed to start up. I fixed this back in February (279016) and MFC'ed it to the supported stable branches. Apart from that, things seem to work out all right.
Since at least Linux and Mac OS X do the right thing, I'd like to go ahead and give this another try. To keep old copies of syslogd working, only start returning ENOTCONN for recent binaries.
I took a look at the XNU sources and they seem to test against both SS_ISCONNECTED, SS_ISCONNECTING and SS_ISDISCONNECTING, instead of just SS_ISCONNECTED. That seams reasonable, so let's do the same.
Test Plan:
This issue was uncovered while writing tests for shutdown() in CloudABI:
https://github.com/NuxiNL/cloudlibc/blob/master/src/libc/sys/socket/shutdown_test.c#L26
Reviewers: glebius, rwatson, #manpages, gnn, #network
Reviewed By: gnn, #network
Subscribers: bms, mjg, imp
Differential Revision: https://reviews.freebsd.org/D3039
This is required by our FORTIFY_SOURCE implementation as it
does more inlining. As a rule of thumb, FORTIFY_SOURCE doubles
the number of inlines except that in grep inlining
blows up for some reason.
to no longer claim they are experimental.
Reviewed by: rwatson@, wblock@
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2985
Fix a warning triggered by the gcc + FORTIFY_SOURCE patches:
In function 'libusb20_parse_config_desc': lib/libusb/libusb20_desc.c:141:
warning: passing argument 1 of 'memcpy' discards qualifiers from pointer
target type
Submitted by: hselansky
We want to ensure we always use libarchive from ports in the ports tree.
It simplifies ports maintainance and anyway libarchive.pc was not reflecting the
different way libarchive can be built in base
SIGCHLD signal, should keep full 32 bits of the status passed to the
_exit(2).
Split the combined p_xstat of the struct proc into the separate exit
status p_xexit for normal process exit, and signalled termination
information p_xsig. Kernel-visible macro KW_EXITCODE() reconstructs
old p_xstat from p_xexit and p_xsig. p_xexit contains complete status
and copied out into si_status.
Requested by: Joerg Schilling
Reviewed by: jilles (previous version), pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
This is based on work done by jeff@ and jhb@, as well as the numa.diff
patch that has been circulating when someone asks for first-touch NUMA
on -10 or -11.
* Introduce a simple set of VM policy and iterator types.
* tie the policy types into the vm_phys path for now, mirroring how
the initial first-touch allocation work was enabled.
* add syscalls to control changing thread and process defaults.
* add a global NUMA VM domain policy.
* implement a simple cascade policy order - if a thread policy exists, use it;
if a process policy exists, use it; use the default policy.
* processes inherit policies from their parent processes, threads inherit
policies from their parent threads.
* add a simple tool (numactl) to query and modify default thread/process
policities.
* add documentation for the new syscalls, for numa and for numactl.
* re-enable first touch NUMA again by default, as now policies can be
set in a variety of methods.
This is only relevant for very specific workloads.
This doesn't pretend to be a final NUMA solution.
The previous defaults in -HEAD (with MAXMEMDOM set) can be achieved by
'sysctl vm.default_policy=rr'.
This is only relevant if MAXMEMDOM is set to something other than 1.
Ie, if you're using GENERIC or a modified kernel with non-NUMA, then
this is a glorified no-op for you.
Thank you to Norse Corp for giving me access to rather large
(for FreeBSD!) NUMA machines in order to develop and verify this.
Thank you to Dell for providing me with dual socket sandybridge
and westmere v3 hardware to do NUMA development with.
Thank you to Scott Long at Netflix for providing me with access
to the two-socket, four-domain haswell v3 hardware.
Thank you to Peter Holm for running the stress testing suite
against the NUMA branch during various stages of development!
Tested:
* MIPS (regression testing; non-NUMA)
* i386 (regression testing; non-NUMA GENERIC)
* amd64 (regression testing; non-NUMA GENERIC)
* westmere, 2 socket (thankyou norse!)
* sandy bridge, 2 socket (thankyou dell!)
* ivy bridge, 2 socket (thankyou norse!)
* westmere-EX, 4 socket / 1TB RAM (thankyou norse!)
* haswell, 2 socket (thankyou norse!)
* haswell v3, 2 socket (thankyou dell)
* haswell v3, 2x18 core (thankyou scott long / netflix!)
* Peter Holm ran a stress test suite on this work and found one
issue, but has not been able to verify it (it doesn't look NUMA
related, and he only saw it once over many testing runs.)
* I've tested bhyve instances running in fixed NUMA domains and cpusets;
all seems to work correctly.
Verified:
* intel-pcm - pcm-numa.x and pcm-memory.x, whilst selecting different
NUMA policies for processes under test.
Review:
This was reviewed through phabricator (https://reviews.freebsd.org/D2559)
as well as privately and via emails to freebsd-arch@. The git history
with specific attributes is available at https://github.com/erikarn/freebsd/
in the NUMA branch (https://github.com/erikarn/freebsd/compare/local/adrian_numa_policy).
This has been reviewed by a number of people (stas, rpaulo, kib, ngie,
wblock) but not achieved a clear consensus. My hope is that with further
exposure and testing more functionality can be implemented and evaluated.
Notes:
* The VM doesn't handle unbalanced domains very well, and if you have an overly
unbalanced memory setup whilst under high memory pressure, VM page allocation
may fail leading to a kernel panic. This was a problem in the past, but it's
much more easily triggered now with these tools.
* This work only controls the path through vm_phys; it doesn't yet strongly/predictably
affect contigmalloc, KVA placement, UMA, etc. So, driver placement of memory
isn't really guaranteed in any way. That's next on my plate.
Sponsored by: Norse Corp, Inc.; Dell
Some external tools just do a 'ls /dev/vmm' to figure out the bhyve virtual
machines on the host. These tools break if the devmem device nodes also
appear in /dev/vmm.
Requested by: grehan
the 'user' sysctl tree, which have all been coming back 0 or empty
since r240176.
Differential Revision: https://reviews.freebsd.org/D2945
Reviewed by: sbruno
Approved by: jmallett (mentor)
MFC after: 3 days
This function is equivalent to fclose(3) function except that it
does not close the underlying file descriptor.
fdclose(3) is step forward to make FILE structure private.
Reviewed by: wblock, jilles, jhb, pjd
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D2697
directory sys/contrib/libnv.
The goal of this operation is to NOT install header files which shouldn't
be used outside the nvlist library.
Approved by: pjd (mentor)
Notable upstream commits (upstream revision in parens):
- Add a JSON producer to LLDB (228636)
- Don't crash on bad DWARF expression (228729)
- Add support of DWARFv3 DW_OP_form_tls_address (231342)
- Assembly profiler for MIPS64 (232619)
- Handle FreeBSD/arm64 core files (233273)
- Read/Write register for MIPS64 (233685)
- Rework LLDB system initialization (233758)
- SysV ABI for aarch64 (236098)
- MIPS software single stepping (236696)
- FreeBSD/arm live debugging support (237303)
- Assembly profiler for mips32 (237420)
- Parse function name from DWARF DW_AT_abstract_origin (238307)
- Improve LLDB prompt handling (238313)
- Add real time signals support to FreeBSDSignals (238316)
- Fix race in IOHandlerProcessSTDIO (238423)
- MIPS64 Branch instruction emulation for SW single stepping (238820)
- Improve OSType initialization in elf object file's arch_spec (239148)
- Emulation of MIPS64 floating-point branch instructions (239996)
- ABI Plugin for MIPS32 (239997)
- ABI Plugin for MIPS64 (240123)
- MIPS32 branch emulation and single stepping (240373)
- Improve instruction emulation based stack unwinding on ARM (240533)
- Add branch emulation to aarch64 instruction emulator (240769)
Update setkey and libipsec to understand aes-gcm-16 as an
encryption method.
A partial commit of the work in review D2936.
Submitted by: eri
Reviewed by: jmg
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
temporary file is created and then a rename() call move it to official file.
This operation didn't have any check to make sure data was written to disk
and if a power cycle happens system could end up with a 0 length passwd
or group database.
There is a pfSense bug with more infor about it:
https://redmine.pfsense.org/issues/4523
The following changes were made to protect passwd and group operations:
* lib/libutil/gr_util.c:
- Replace mkstemp() by mkostemp() with O_SYNC flag to create temp file
- After rename(), fsync() call on directory for faster result
* lib/libutil/pw_util.c
- Replace mkstemp() by mkostemp() with O_SYNC flag to create temp file
* usr.sbin/pwd_mkdb/pwd_mkdb.c
- Added O_SYNC flag on dbopen() calls
- After rename(), fsync() call on directory for faster result
* lib/libutil/pw_util.3
- pw_lock() returns a file descriptor to master password file on success
Differential Revision: https://reviews.freebsd.org/D2978
Approved by: bapt
Sponsored by: Netgate
point support. The fenv-vfp.c file overrides -mfloat-abi so it can use
floating point instructions if it detects support at runtime. Make it also
override -mfpu in case the user has set -mfpu=none.
to be before the lavel, otherwise an extra word may be added between the
label and the data.
Obtained from: ABT Systems Ltd
Sponsored by: The FReeBSD Foundation
CLANG WARNINGS.
BUMP SHLIB_MAJOR version as the ABI potentially changed.
Also run an 'exp run' to double check if any external project are using
those functions. Thanks antoine@.
PR: 200807
Differential Revision: D2775
Reviewed by: kib, ngie
This symbol can sometimes be emitted by clang++, and was not yet
exported from libcxxrt. Attempt to be compatible with libsupc++ by
using the same CXXABI_1.3.6 symbol version.
Reported by: yuri@rawbw.com
PR: 200863
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D2850
When enough time has passed for users to update their userland the kernel
fix will be applied. This will change the ABI to have x0 point to the args
and sp be correctly aligned.
It is expected this compatibility code can be removed when the kernel and
qemu usermode emulation have both been updated for the new ABI.
This fixes clang failures, and most likely other crashes.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
due to a change in behavior of the 'vm_map_gpa()'.
Prior to r284539 if 'vm_map_gpa()' was called to map an address range in the
guest MMIO region then it would return NULL. This was used by the "movs"
emulation to detect if the 'src' or 'dst' operand was in MMIO space.
Post r284539 'vm_map_gpa()' started returning a non-NULL pointer even when
mapping the guest MMIO region.
Fix this by returning non-NULL only if [gaddr, gaddr+len) is entirely
within the 'lowmem' or 'highmem' regions and NULL otherwise.
Pointy hat to: neel
Reviewed by: grehan
Reported by: tychon, Ben Perrault (ben.perrault@gmail.com)
MFC after: 1 week
devmem is used to represent MMIO devices like the boot ROM or a VESA framebuffer
where doing a trap-and-emulate for every access is impractical. devmem is a
hybrid of system memory (sysmem) and emulated device models.
devmem is mapped in the guest address space via nested page tables similar
to sysmem. However the address range where devmem is mapped may be changed
by the guest at runtime (e.g. by reprogramming a PCI BAR). Also devmem is
usually mapped RO or RW as compared to RWX mappings for sysmem.
Each devmem segment is named (e.g. "bootrom") and this name is used to
create a device node for the devmem segment (e.g. /dev/vmm/testvm.bootrom).
The device node supports mmap(2) and this decouples the host mapping of
devmem from its mapping in the guest address space (which can change).
Reviewed by: tychon
Discussed with: grehan
Differential Revision: https://reviews.freebsd.org/D2762
MFC after: 4 weeks
- Fix a case where NaNs were not mixed correctly and signalling NaNs were
not converted to quiet NaNs.
- Eliminate two negations from ctan(z).
In collaboration with: bde
but must still satisfy csinh(conj(z)) == conj(csinh(z)) and csinh(-z) ==
-csinh(z). This allows eliminating two negations from csin(z).
In collaboration with: bde
Since METAMODE has been added, sys.mk loads bsd.mkopt.mk which ends load loading
bsd.own.mk which then defines SHLIBDIR before all the Makefile.inc everywhere.
This makes /lib being populated again.
Reported by: many
Use a constant array for the MIB. Newer LLVM decided that mib[] warranted
stack protections, with the obvious crash after the setup was done.
As a positive side effect, code size shrinks a bit.
I'm not sure why this hasn't bitten us yes, but it is certainly possible and
there are no real drawbacks to this change anyway.
Submitted by: pfg
Obtained from: NetBSD
MFC after: 1 week
lib/libfetch/http.c:1628:26: error: address of array 'purl->user'
will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
aparams.user = purl->user ?
~~~~~~^~~~ ~
lib/libfetch/http.c:1630:30: error: address of array 'purl->pwd'
will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
aparams.password = purl->pwd?
~~~~~~^~~~
lib/libfetch/http.c:1657:25: error: address of array 'url->user'
will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
aparams.user = url->user ?
~~~~~^~~~ ~
lib/libfetch/http.c:1659:29: error: address of array 'url->pwd'
will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
aparams.password = url->pwd ?
~~~~~^~~ ~
lib/libfetch/http.c:1669:25: error: address of array 'url->user'
will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
aparams.user = url->user ?
~~~~~^~~~ ~
lib/libfetch/http.c:1671:29: error: address of array 'url->pwd'
will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
aparams.password = url->pwd ?
~~~~~^~~ ~
Since url->user and url->pwd are arrays, they can never be NULL, so the
checks can be removed.
Reviewed by: bapt
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D2673
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
MAM is Medium Auxiliary Memory and is most commonly found as flash
chips on tapes.
This includes support for reading attributes and decoding most
known attributes, but does not yet include support for writing
attributes or reporting attributes in XML format.
libsbuf/Makefile:
Add subr_prf.c for the new sbuf_hexdump() function. This
function is essentially the same function.
libsbuf/Symbol.map:
Add a new shared library minor version, and include the
sbuf_hexdump() function.
libsbuf/Version.def:
Add version 1.4 of the libsbuf library.
libutil/hexdump.3:
Document sbuf_hexdump() alongside hexdump(3), since it is
essentially the same function.
camcontrol/Makefile:
Add attrib.c.
camcontrol/attrib.c:
Implementation of READ ATTRIBUTE support for camcontrol(8).
camcontrol/camcontrol.8:
Document the new 'camcontrol attrib' subcommand.
camcontrol/camcontrol.c:
Add the new 'camcontrol attrib' subcommand.
camcontrol/camcontrol.h:
Add a function prototype for scsiattrib().
share/man/man9/sbuf.9:
Document the existence of sbuf_hexdump() and point users to
the hexdump(3) man page for more details.
sys/cam/scsi/scsi_all.c:
Add a table of known attributes, text descriptions and
handler functions.
Add a new scsi_attrib_sbuf() function along with a number
of other related functions that help decode attributes.
scsi_attrib_ascii_sbuf() decodes ASCII format attributes.
scsi_attrib_int_sbuf() decodes binary format attributes, and
will pass them off to scsi_attrib_hexdump_sbuf() if they're
bigger than 8 bytes.
scsi_attrib_vendser_sbuf() decodes the vendor and drive
serial number attribute.
scsi_attrib_volcoh_sbuf() decodes the Volume Coherency
Information attribute that LTFS writes out.
sys/cam/scsi/scsi_all.h:
Add a number of attribute-related structure definitions and
other defines.
Add function prototypes for all of the functions added in
scsi_all.c.
sys/kern/subr_prf.c:
Add a new function, sbuf_hexdump(). This is the same as
the existing hexdump(9) function, except that it puts the
result in an sbuf.
This also changes subr_prf.c so that it can be compiled in
userland for includsion in libsbuf.
We should work to change this so that the kernel hexdump
implementation is a wrapper around sbuf_hexdump() with a
statically allocated sbuf with a drain. That will require
a drain function that goes to the kernel printf() buffer
that can take a non-NUL terminated string as input.
That is because an sbuf isn't NUL-terminated until it is
finished, and we don't want to finish it while we're still
using it.
We should also work to consolidate the userland hexdump and
kernel hexdump implemenatations, which are currently
separate. This would also mean making applications that
currently link in libutil link in libsbuf.
sys/sys/sbuf.h:
Add the prototype for sbuf_hexdump(), and add another copy
of the hexdump flag values if they aren't already defined.
Ideally the flags should be defined in one place but the
implemenation makes it difficult to do properly. (See
above.)
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
- fix types of rl_completion_entry_function and rl_add_defun
- call update pos before completion to refresh the screen
From Thomas Eriksson
Adjust API to a more modern readline (Ryo Onodera)
remove duplicate declaration
it takes a new argument allowing to specify the endianness of the database
to generate
Differential Revision: https://reviews.freebsd.org/D2730
Reviewed by: ian
within all of these functions, and is only stored in some to correctly pad
the stack.
This will be needed to build as Thumb-2 as, unlike with ARM instructions,
the msr instruction only takes a register as the input.
The arm version hasn't been used in ages.
The mips version uses a valid, but pointless check of v1 and has been
unhooked from the build since r276630.
Differential Revision: https://reviews.freebsd.org/D2592
Reviewed by: emaste
Sponsored by: DARPA, AFRL
examined via 'vmstat -o'. It can be used to determine which files are
using physical pages of memory and how much each is using.
Differential Revision: https://reviews.freebsd.org/D2277
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: Norse Corp, Inc. (forward porting to HEAD/10)
Highlights (upstream revisions):
- Fix SHT_GROUP handling in elfcopy/strip (3206 3220 3221)
- Misc elfcopy / strip bug fixes (3215 3216 3217)
- Many C++ demangler improvements (3199 3200 3201 3202 3203 3204 3205
3208 3210 3211 3212)
- Improve GNU binutils compatibility in elfcopy / strip (3213 3214)
- Add -g option to readelf(1): dump contents of section groups (3219)
- Add EM_IAMCU 32-bit Intel MCU (3198)
Also add a compat #define for building with older FreeBSD ELF headers.
The GRP_COMDAT flag was added to elf_common.h in r283110, but it's not
available during the bootstrap build. It is also convenient to be able
to build on older hosts.
Thanks to antoine@ for tracking down issues through multiple exp-runs
and to kaiw@ for fixing.
PR: 198611 (exp-run), 200350
Sponsored by: The FreeBSD Foundation
This function originated in glibc, and this matches their behaviour
(and NetBSD, OpenBSD, and musl).
An empty big string (arg "l") is handled by the existing
l_len < s_len test.
Reviewed by: bapt, ngie
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2657
encoded chunk of a UTF-7 string, treat that as an incomplete character and
return an error instead of a shift sequence and no error.
Also check that the low 2 bytes have a valid value.
MFC after: 1 week
the input buffer.
_citrus_UTF7_mbtoutf16 stored the decoder state at the beginning so it
could restore this state on an incomplete character such that the next
call would restart the decoding. The problem was that "-" (end of base64
mode) at the end of a string was also treated as an incomplete character
but was also removed from the state buffer. So the initial state would be
restored (with base64 mode) and the next call would no longer see the "-"
so it continued in base64 mode.
This state saving/restoring isn't needed here. It's already handled
elsewhere (citrus_iconv_std.c:_citrus_iconv_std_iconv_convert) so just
remove it.
Also initialise *nresult.
PR: 200398
Tested by: delphij
MFC after: 1 week
This was a leftover from when we had both i386 a.out and ELF.
Reviewed by: kib, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2591
This removes one of the frequent causes of ABI breakage when new CPU
types are added to hwpmc(4).
Differential Revision: https://reviews.freebsd.org/D2586
Reviewed by: davide, emaste, gnn (earlier version)
MFC after: 2 weeks
and qone[f]() were marked as __inline, but their forward
declarations were not updated. Fix the forward declarations
to match the actual function declarations.
Requested by: bde
to handle per-thread information. Since our pthread_setspecific()
implementation calls calloc(3) to allocate per-thread specific data
storage, things get complicated.
Switch the allocator to use bare mmap(2). There is some loss of the
allocated page, since e.g. on amd64, PTHREAD_KEYS_MAX * sizeof(struct
pthread_specific_elem) is 3K (it actually spans whole page due to
padding), but I believe it is more acceptable than additional code for
specialized allocator().
The alternatives would either to make the specific data array be part of
the struct thread, or use internal bindings to call the libc malloc,
avoiding interposing.
Also do the style pass over the thr_spec.c, esp. simplify the
conditionals nesting by returning early when an error detected.
Remove trivial comments.
Found by: yuri@rawbw.com
PR: 200138
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Highlights:
- Fix man page markup, whitespace, and typos
- Fix sh_info of SHT_GROUP section to point to the correct string
- Improve validation in readelf and elfcopy/strip
- Handle DWARF 4's DW_AT_high_pc in addr2line
Sponsored by: The FreeBSD Foundation
The appropriate subdirectories are handled by lib/csu/Makefile. There's
no need to duplicate this logic in Makefile.inc1 and lib/Makefile.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2523
to handle the ARM conditional execution.
While here fix a bug found by this in the hard-float code, cc is the
opposite of cs. The former is used for 'less than' in floating-point code
and is executed when the C (carry) bit is clear, the latter is used when
greater than, equal, or unordered, and is executed when the C bit is set.
Introduce further adjustments to the renaming of libmd
symbols: make sure that we do not generate dangling weak
aliases, as this causes build failures on MIPS.
Tested by: sbruno
(Makefile.inc1): add dependency of xinstall on libmd to
avoid failure of parallel bootstrap.
(lib/libmd/*.h): do not redefine symbols if already
defined as macros (libcrypt uses the same sources internally,
redefining symbols with a prefix of its own).
Fixes build failures caused by previous change to libmd.
Reported by: ian
Pointy hat to: thomas
recv() and send()'s calls to recvfrom() and sendto() are much like
waitpid()'s call to wait4(), and likewise need not allow PLT interposing on
the called function.
Add a prefix to all symbols in libmd to avoid incompatibilites
with same-named, but not binary compatible, symbols from libcrypto.
Also introduce Weak aliases to avoid the need to rebuild dependent
binaries and a major version bump.
PR: 199119
Differential Revision: D2216
Reviewed by: roberto, delphij
MFC after: 2 weeks
Prior to this change both functions returned 0 for success, -1 for failure
and +1 to indicate that an exception was injected into the guest.
The numerical value of ERESTART also happens to be -1 so when these functions
returned -1 it had to be translated to a positive errno value to prevent the
VM_RUN ioctl from being inadvertently restarted. This made it easy to introduce
bugs when writing emulation code.
Fix this by adding an 'int *guest_fault' parameter and setting it to '1' if
an exception was delivered to the guest. The return value is 0 or EFAULT so
no additional translation is needed.
Reviewed by: tychon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D2428
as seek to teh last location saved will still work. This is needed for Samba
to be able to correctly handle delete requests from windows. This does not
completely fix seekdir when deletes are present but fixes the worst of the
problems. The real solution must involve some changes to the API for eh VFS
and getdirentries(2).
Obtained from: Panzura inc
MFC after: 1 week
Now when a lib is marked as PRIVATELIB it is renamed into libprivate$foo instead
of being installed in /usr/lib/private and playing with rpath.
Also allow to install headers for PRIVATELIBS in that case the headers will be
installed in /usr/include/private/$foo
Keep the headers under a private namespace to prevent third party build system
to easily find them to ensure they are only used on purpose.
This allows for non base applications to statically link against a library in
base which is linked to a privatelib
Treating PRIVATELIBS as regular libraries allows to push them into our current
compatX packages if needed.
While here finish promotion of libevent as PRIVATELIB
Install header for bsdstat and libucl
Differential Revision: https://reviews.freebsd.org/D2365
Reviewed by: brooks, des
Discussed with: imp
- Note that ftruncate(2) can operate on shared memory objects and cross
reference shm_open(2).
- Note that ftruncate(2) does not change the file position pointer (aka
seek pointer) of the file descriptor.
- ftruncate(2) will fail with EINVAL for all sorts of other fd types than
just sockets, so instead note that it fails for all but regular files and
shared memory objects.
- Note that ftruncate(2) also appeared in 4.2BSD along with truncate(2).
(Or at least the manpage for both appeared in 4.2, I did not check the
kernel code itself to see if either predated 4.2.)
PR: 199472 (2)
Submitted by: andrew@ugh.net.au (2)
MFC after: 1 week
domain, not a file descriptor. Use 'domain' instead of the original 'd'
for this argument to match socket(2).
PR: 199491
Reported by: sp55aa@qq.com
MFC after: 1 week
multiple values using the same key in a nvlist.
Approved by: pjd (mentor)
Obtained from: WHEEL Systems (http://www.wheelsystems.com)
Update man page.
Reviewed by: AllanJude
Approved by: pjd (mentor)
Change the nvlist_recv() function to take additional argument that
specifies flags expected on the received nvlist. Receiving a nvlist with
different set of flags than the ones we expect might lead to undefined
behaviour, which might be potentially dangerous.
Update consumers of this and related functions and update the tests.
Approved by: pjd (mentor)
Update man page for nvlist_unpack, nvlist_recv, nvlist_xfer, cap_recv_nvlist
and cap_xfer_nvlist.
Reviewed by: AllanJude
Approved by: pjd (mentor)
Add a manpage for it, assign the copyright to the OpenBSD project on it since it
is mostly copy/paste from OpenBSD manpage.
style(9) fixes
Differential Revision: https://reviews.freebsd.org/D2420
Reviewed by: kib
Those functions are problematic, because there is no way to report
memory allocation problems without complicating the API, so we can
either abort or potentially return invalid results. None of which is
acceptable.
In most cases the caller knows the size of the name, so he can allocate
buffer on the stack and use snprintf(3) to prepare the name.
After some discussion the conclusion is to removed those functions,
which also simplifies the API.
Discussed with: pjd, rstone
Approved by: pjd (mentor)
MACHINE_CPUARCH or MACHINE_ARCH, not MACHINE. The latter is for kernel
only things. Also, I think this should be unconditional since all our
architectures have long double support, but I don't have time to test
that thoroughly so just add a comment to that effect.
The conditional came from NetBSD, where only select architectures have this
header/support
All architectures on FreeBSD have the necessary support though, so the
conditional's completely unnecessary
make tinderbox done on all architectures (including arm64, where the issue
occurred before) this time
X-MFC with: r282057, r282092
MFC after: 6 days
Obtained from: https://github.com/Juniper/libxo/tree/0.3.2
Requested by: Phil Shafer <phil@juniper.net>
This import incorporates local change 279966.
Local change 276260 has been merged-in.
