Commit Graph

63 Commits

Author SHA1 Message Date
Ryan Libby
32981ab80a hptmv: avoid gcc variably-modified warning
gcc produces a "variably modified X at file scope" warning for
structures that use these size definitions.

PR:		211540
Reviewed by:	markj
Approved by:	markj (mentor)
Sponsored by:	Dell EMC Isilon
Differential revision:	https://reviews.freebsd.org/D11416
2017-07-06 05:32:22 +00:00
Pedro F. Giffuni
4d24901ac9 sys/dev: Replace zero with NULL for pointers.
Makes things easier to read, plus architectures may set NULL to something
different than zero.

Found with:	devel/coccinelle
MFC after:	3 weeks
2017-02-20 03:43:12 +00:00
Alexander Motin
950c5aca4a Remove dead mentions of CAM target mode APIs from drivers.
This makes grepping kernel for target mode implementation much easier.
2017-02-19 17:27:58 +00:00
Alan Somers
4195c7de24 Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name)
The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".

This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.

PR:		215474
Reported by:	Coverity
CID:		1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID:		1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID:		1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID:		1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID:		1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID:		1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID:		1010035 1010036 1010042 1010041 1010040 1010039
Reviewed by:	imp, sephe, slm
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D9037
Differential Revision:	https://reviews.freebsd.org/D9038
2017-01-04 20:26:42 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Pedro F. Giffuni
d9c9c81c08 sys: use our roundup2/rounddown2() macros when param.h is available.
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.

This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
2016-04-21 19:57:40 +00:00
Sean Bruno
a0adbb3df1 hptmv(4) Fix potential buffer overflow in hpt_set_info.
While here, adjust some whitespace and yeild some useful debug info.

This is untested on this hardware, testing requests to -scsi went
unanswered.

PR:	206585
Submitted by:	cturt@hardenedbsd.org
MFC after:	2 weeks
2016-04-18 23:26:11 +00:00
Justin Hibbits
eff83876b6 Replace several bus_alloc_resource() calls with bus_alloc_resource_any()
Most of these are BARs, and we allocate them in their entirety.  The one outlier
in this is amdsbwd, which calls bus_set_resource() prior.

Reviewed by:	jhb
Differential Revision:	https://reviews.freebsd.org/D5370 (partial)
2016-02-27 03:34:01 +00:00
Justin Hibbits
43cd61606b Replace several bus_alloc_resource() calls using default arguments with bus_alloc_resource_any()
Since these calls only use default arguments, bus_alloc_resource_any() is the
right call.

Differential Revision: https://reviews.freebsd.org/D5306
2016-02-19 03:37:56 +00:00
Conrad Meyer
ab22155114 hptmv(4): Fix broken sysctl(9) API assumptions
Sponsored by:	EMC / Isilon Storage Division
2015-11-07 23:05:23 +00:00
John Baldwin
49b3fc4062 Various fixes to hptmv(4):
- Replace the global driver lock with a per-instance device lock.
- Use the per-instance device lock instead of Giant for the CAM sim lock.
- Add global locks to protect the adapter list and DPC queues.
- Use wakeup() and mtx_sleep() to wait for certain events like the
  controller going idle rather than polling via timeouts passed to
  tsleep().
- Use callout(9) instead of timeout(9).
- Mark the interrupt handler MPSAFE.
- Remove compat shims for FreeBSD versions older than 8.0.

Reviewed by:	Steve Chang <ychang@highpoint-tech.com>
2014-08-05 23:58:49 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
Xin LI
7634a04b30 Apply vendor fixes to the High Point drivers:
- Don't call xpt_free_path() in os_query_remove_device() and
   always return TRUE.
 - Update os_buildsgl() to support build logical SG table which
   will be used by lower RAID module.
 - Return CAM_SEL_TIMEOUTstatus for SCSIcommand failed as target
   missing.

Many thanks to HighPoint for providing this driver update.

Submitted by:	Steve Chang
Reviewed by:	mav
MFC after:	3 days
2014-06-11 18:24:51 +00:00
Scott Long
eb8a7632ba Re-do r255853. Along with adding back the API/ABI changes from the
original, this hides the contents of cam_compat.h from ktrace/kdump/truss,
avoiding problems there.  There are no user-servicable parts in there, so
no need for those tools to be groping around in there.

Approved by:    re
2013-09-25 17:16:21 +00:00
Glen Barber
0082e54e9d Revert r255853 pending fixes to build errors in usr.bin/kdump
Approved by:	re (implicit)
2013-09-25 01:48:45 +00:00
Scott Long
185884259b Update the CAM API for FreeBSD 10:
- Remove the timeout_ch field.  It's been deprecated since FreeBSD 7.0;
  MPSAFE drivers should be managing their own timeout storage.  The
  remaining non-MPSAFE drivers have been modified to also manage their own
  storage, and should be considered for updating to MPSAFE (or removal)
  during the FreeBSD 10.x lifecycle.

- Add fields related to soft timeouts and quality of service, to be used
  in upcoming work.

- Add room for more flags in the CCB header and path_inq structures.

- Begin support for extended 64-bit LUNs.

- Bump the CAM version number to 0x18, but add compat shims.  Tested with
  camcontrol and smartctl.

Reviewed by:    nathanw, ken, kib
Approved by:    re
Obtained from:  Netflix
2013-09-24 16:50:53 +00:00
Eitan Adler
7a2b450ff8 Fxi a bunch of typos.
PR:	misc/174625
Submitted by:	Jeremy Chadwick <jdc@koitsu.org>
2013-05-10 16:41:26 +00:00
Alexander Motin
c33c978915 Move hptmv and mpt drivers shutdown a bit later to the SHUTDOWN_PRI_LAST
stage of shutdown_post_sync.  That should allow CAM to do final cache flush
at the SHUTDOWN_PRI_DEFAULT without using polling magic.

MFC after:	3 days
2013-04-24 19:00:45 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
Xin LI
a8bc743735 It seems that what the code really meant is that when a write is completed,
do a BUS_DMASYNC_POSTWRITE over the DMA map.  The way it currently is would
only do POSTREAD for read transactions.

Submitted by:	Sascha Wildner
MFC after:	1 month
2012-09-07 19:00:27 +00:00
Eitan Adler
d45ce511db Adding missing dependancies for loading hptiop(4), hptmv(4) and isp(4) as modules.
PR:		kern/166239
Submitted by:	Pavel Timofeev <timp87@gmail.com>
Discussed on:	-stable, -scsi
Reviewed by:	scottl
No objection from: mjacob
Approved by:	cperciva
MFC after:	3 days
2012-06-01 04:34:49 +00:00
Scott Long
b6f97155cc Convert a number of drivers to obtaining their parent DMA tag from their
PCI device attachment.
2012-03-12 08:03:51 +00:00
Ulrich Spörlein
004a39cd57 Remove spurious 8bit chars, turning files into plain ASCII. 2012-01-15 13:23:33 +00:00
Marius Strobl
f3b080e6ab - Just use cam_calc_geometry(9) on newer version of FreeBSD rather than
duplicating it.
- In hptmv(4) and hptrr(4) use __FBSDID and DEVMETHOD_END.
2011-11-23 21:43:51 +00:00
Jeff Roberson
e4cd31dd3c - Merge changes to the base system to support OFED. These include
a wider arg2 for sysctl, updates to vlan code, IFT_INFINIBAND,
   and other miscellaneous small features.
2011-03-21 09:40:01 +00:00
Alexander Motin
9085ea5054 Report transport type in XPT_PATH_INQ.
MFC after:	3 days
2010-06-19 13:42:14 +00:00
Martin Blapp
c2ede4b379 Remove extraneous semicolons, no functional changes.
Submitted by:	Marc Balmer <marc@msys.ch>
MFC after:	1 week
2010-01-07 21:01:37 +00:00
Alexander Motin
6fca500004 MFp4:
Remove unused ATAPI definitions, conflicting with ata.h.

Submitted by:	scottl
2009-06-24 20:43:51 +00:00
Xin LI
cd3ef66680 Use DEVICE_SHUTDOWN(9) mechanism for shutdown handler.
Suggested by:	jhb
2009-04-09 07:45:23 +00:00
Xin LI
8eadd1b28e When multiple cards are present, register a shutdown handler for each card
instead of just register one for the first adapter.  Without doing this
there would be some data loss upon shutdown because data could be ignored
when flushing to disk.

MFC after:	3 days
2009-04-07 16:40:31 +00:00
Xin LI
6447075520 Update driver to vendor's version 1.16 plus some local changes:
- override_kernel_driver() has been removed since this is an
   in-tree version of driver.
 - __DATE__ and __TIME__ removed from version string to make
   binary update builders happy.
 - Utilize pause(9) for __FreeBSDversion >= 700033 (redo 167086).
 - Utilize kproc_suspend_check() for __FreeBSDversion >= 800002.
   (redo 172836).
 - Don't read past end of pVDevice (redo 143787).
 - Make sure that controller and channel are initialized (redo 169823).
 - Don't include cam/cam_xpt_periph.h (redo 158177).

MFC After:	3 days
2009-04-07 16:38:25 +00:00
Julian Elischer
3745c395ec Rename the kthread_xxx (e.g. kthread_create()) calls
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.

I'd LOVE to do this rename in 7.0  so that we can eventually MFC the
new kthread_xxx() calls.
2007-10-20 23:23:23 +00:00
Scott Long
b50569b71d Prepare for future integration between CAM and newbus. xpt_bus_register
now takes a device_t to be the parent of the bus that is being created.
Most SIMs have been updated with a reasonable argument, but a few exceptions
just pass NULL for now.  This argument isn't used yet and the newbus
integration likely won't be ready until after 7.0-RELEASE.
2007-06-17 05:55:54 +00:00
Matt Jacob
b8fdb7f911 Perhaps a better fix- make the called function do the (possible never reached)
initialization. Do a token amount of style cleanup.

Poked by: bde
2007-05-21 09:26:47 +00:00
Matt Jacob
6c7d0cff3f Make gcc 4.2 happy by initiatlizing controller && channel prior
to a call to a function which *might* then initialize them.

MFC after:	3 days
2007-05-20 16:49:09 +00:00
Scott Long
2b83592fdc Remove Giant from CAM. Drivers (SIMs) now register a mutex that CAM will
use to synchornize and protect all data objects that are used for that
SIM.  Drivers that are not yet MPSAFE register Giant and operate as
usual.  RIght now, no drivers are MPSAFE, though a few will be changed
in the coming week as this work settles down.

The driver API has changed, so all CAM drivers will need to be recompiled.
The userland API has not changed, so tools like camcontrol do not need to
be recompiled.
2007-04-15 08:49:19 +00:00
John Baldwin
4d70511ac3 Use pause() rather than tsleep() on stack variables and function pointers. 2007-02-27 17:23:29 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
John Baldwin
4ed23cf283 - Use a regular mutex rather than a spin mutex. This driver doesn't need
a spin mutex since it doesn't have an INTR_FAST interrupt handler.
  Beyond that the driver is still under Giant anyway.
- Remove unneeded locking during attach across operations that can't be
  called with locks held (such as bus_dma_tag_create()).

MFC after:		1 week
Not objected to by:	scottl
2007-01-04 20:28:17 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Scott Long
648b922789 Remove some header polution. 2006-04-30 16:44:41 +00:00
Ruslan Ermilov
f4e9888107 Fix -Wundef. 2005-12-04 02:12:43 +00:00
Jens Schweikhardt
b49a9e5bab Don't augment the DRIVER_VERSION "v1.12" with __DATE__ and __TIME__.
This is the only file of > 1700 files in a buildkernel here doing that.
It makes reproducible builds (same source => same binary) impossible.

Spotted by:	devel/ccache
2005-11-13 10:13:31 +00:00
Scott Long
e1ab829ad2 Fix a typo that broke LINT. 2005-09-08 14:13:36 +00:00
Scott Long
d2bd3ab995 Import new version of the HPTMV driver from Highpoint. The major change
here is the support for amd64, as well as possible support for PAE.  Many
thanks to Highpoint for continuing to support FreeBSD.

Obtained from:  Steve Chang @ Highpoint
MFC After: 3 days.
2005-09-07 23:33:26 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Sam Leffler
6e3a31bd67 check copyin return value (and while we're at it copyout too)
Noticed by:	Coverity Prevent analysis tool
2005-03-31 05:15:27 +00:00
Sam Leffler
72bd2eaecb plug resource leak
Noticed by:	Coverity Prevent analysis tool
2005-03-29 01:46:25 +00:00