accurate reporting of multi-terabyte filesystem sizes.
You should build and boot a new kernel BEFORE doing a `make world'
as the new kernel will know about binaries using the old statfs
structure, but an old kernel will not know about the new system
calls that support the new statfs structure. Running an old kernel
after a `make world' will cause programs such as `df' that do a
statfs system call to fail with a bad system call.
Reviewed by: Bruce Evans <bde@zeta.org.au>
Reviewed by: Tim Robbins <tjr@freebsd.org>
Reviewed by: Julian Elischer <julian@elischer.org>
Reviewed by: the hoards of <arch@freebsd.org>
Sponsored by: DARPA & NAI Labs.
Introduce two new macros MNT_ILOCK(mp)/MNT_IUNLOCK(mp) to
operate on this mutex transparently.
Eventually new mutex will be protecting more fields in
struct mount, not only vnode list.
Discussed with: jeff
wasn't curthread, i.e. when we receive a thread pointer to use
as a function argument. Use VOP_UNLOCK/vrele in these cases.
The only case there td != curthread known at the moment is
boot() calling sync with thread0 pointer.
This fixes the panic on shutdown people have reported.
so make the code slightly more uniform. The vnode lock is acquired in
all cases and now the only difference between VCHR and other is we
call UFS_UPDATE instead of VOP_FSYNC().
- Slightly rewrite the fsync loop to be more lock friendly. We must
acquire the vnode interlock before dropping the mnt lock. We must
also check XLOCK to prevent vclean() races.
- Use LK_INTERLOCK in the vget() in ffs_sync to further prevent vclean()
races.
- Use a local variable to store the results of the nvp == TAILQ_NEXT
test so that we do not access the vp after we've vrele()d it.
- Add an XXX comment about UFS_UPDATE() not being protected by any lock
here. I suspect that it should need the VOP lock.
we release the mntvnode_mtx.
- Call vgonel() directly instead of going through vrecycle() since we own
the interlock now.
- Remove a few cases where we locked the interlock just so that we could
call VOP_UNLOCK with interlock held.
get the same value from ip->i_ump->um_devvp.
This saves a pointer in the memory copies of inodes, which can
easily run into several hundred kilobytes.
The extra indirection is unmeasurable in benchmarks.
Approved by: mckusick
contain the filedescriptor number on opens from userland.
The index is used rather than a "struct file *" since it conveys a bit
more information, which may be useful to in particular fdescfs and /dev/fd/*
For now pass -1 all over the place.
These fields can be left as NULL if ffs_vget() allocates an inode but
fails before the dinode memory has been allocated. There are two cases
when this can occur: when we lose a race and another process has added
the inode to the hash, and when reading the inode off disk fails.
The bug was observed by Kris on one of the package-building machines.
See http://marc.theaimsgroup.com/?l=freebsd-current&m=105172731013411&w=2
In Kris's case, it was the bread() that failed because of a disk error.
The alternative to this patch is to ensure that ffs_vget() does not call
vput() when the inode that hasn't been properly initialised.
- Define one flag GB_LOCK_NOWAIT that tells getblk() to pass the LK_NOWAIT
flag to the initial BUF_LOCK(). This will eventually be used in cases
were we want to use a buffer only if it is not currently in use.
- Convert all consumers of the getblk() api to use this extra parameter.
Reviwed by: arch
Not objected to by: mckusick
from the filesystem size field to the filesystem maximum blocksize
field. The problem is that older versions of growfs updated only the
new size field and not the old size field. This resulted in the old
(smaller) size field being copied up to the new size field which
caused the filesystem to appear to fsck to be badly trashed.
This also adds a sanity check to ensure that the superblock is not
being updated when the filesystem is mounted read-only. Obviously
such an update should never happen.
Reported by: Nate Lawson <nate@root.org>
Sponsored by: DARPA & NAI Labs.
values for the initial inode generation numbers in newfs and for
newly allocated inode generation numbers in the kernel.
Submitted by: Theo de Raadt <deraadt@cvs.openbsd.org>
Sponsored by: DARPA & NAI Labs.
Remove the malloctype from the ufs mount structure, instead add a callback
to the storage method for freeing inodes: UFS_IFREE().
Add vfs_ifree() method function which frees an inode.
Unvariablelize the malloc type used for allocating inodes.
before using it to write the superblock. This is to guard against
accidentally trashing the disklabel if the superblock format missed
being upgraded by the new kernel.
Reported by: Sam Leffler <sam@errno.com>
Sponsored by: DARPA & NAI Labs.
Approved by: Murray Stokely <murray@FreeBSD.org>
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.
Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.
Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by: DARPA & NAI Labs.
"refreshing" the label on the vnode before use, just get the label
right from inception. For single-label file systems, set the label
in the generic VFS getnewvnode() code; for multi-label file systems,
leave the labeling up to the file system. With UFS1/2, this means
reading the extended attribute during vfs_vget() as the inode is
pulled off disk, rather than hitting the extended attributes
frequently during operations later, improving performance. This
also corrects sematics for shared vnode locks, which were not
previously present in the system. This chances the cache
coherrency properties WRT out-of-band access to label data, but in
an acceptable form. With UFS1, there is a small race condition
during automatic extended attribute start -- this is not present
with UFS2, and occurs because EAs aren't available at vnode
inception. We'll introduce a work around for this shortly.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
check for and/or report I/O errors. The result is that a VFS_SYNC
or VOP_FSYNC called with MNT_WAIT could loop infinitely on ufs in
the presence of a hard error writing a disk sector or in a filesystem
full condition. This patch ensures that I/O errors will always be
checked and returned. This patch also ensures that every call to
VFS_SYNC or VOP_FSYNC with MNT_WAIT set checks for and takes
appropriate action when an error is returned.
Sponsored by: DARPA & NAI Labs.
automatically set MNT_MULTILABEL in the mount flags.
If FS_ACLS is set in a UFS or UFS2 superblock, automatically
set MNT_ACLS in the mount flags.
If either of these flags is set, but the appropriate kernel option
to support the features associated with the flag isn't available,
then print a warning at mount-time.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
that use it. Specifically, vop_stdlock uses the lock pointed to by
vp->v_vnlock. By default, getnewvnode sets up vp->v_vnlock to
reference vp->v_lock. Filesystems that wish to use the default
do not need to allocate a lock at the front of their node structure
(as some still did) or do a lockinit. They can simply start using
vn_lock/VOP_UNLOCK. Filesystems that wish to manage their own locks,
but still use the vop_stdlock functions (such as nullfs) can simply
replace vp->v_vnlock with a pointer to the lock that they wish to
have used for the vnode. Such filesystems are responsible for
setting the vp->v_vnlock back to the default in their vop_reclaim
routine (e.g., vp->v_vnlock = &vp->v_lock).
In theory, this set of changes cleans up the existing filesystem
lock interface and should have no function change to the existing
locking scheme.
Sponsored by: DARPA & NAI Labs.
even when the underlying device has a larger sector size. Therefore,
the filesystem code should not (and with this patch does not) try to
use the underlying sector size when doing disk block address calculations.
This patch fixes problems in -current when using the swap-based
memory-disk device (mdconfig -a -t swap ...). This bugfix is not
relevant to -stable as -stable does not have the memory-disk device.
Sponsored by: DARPA & NAI Labs.
v_tag is now const char * and should only be used for debugging.
Additionally:
1. All users of VT_NTS now check vfsconf->vf_type VFCF_NETWORK
2. The user of VT_PROCFS now checks for the new flag VV_PROCDEP, which
is propagated by pseudofs to all child vnodes if the fs sets PFS_PROCDEP.
Suggested by: phk
Reviewed by: bde, rwatson (earlier version)
UFS only thing, and FFS should in principle not know if it is enabled
or not.
This commit cleans ffs_vnops.c for such knowledge, but not ffs_vfsops.c
Sponsored by: DARPA and NAI Labs.
these in the main filesystems. This does not change the resulting code
but makes the source a little bit more grepable.
Sponsored by: DARPA and NAI Labs.
- v_vflag is protected by the vnode lock and is used when synchronization
with VOP calls is needed.
- v_iflag is protected by interlock and is used for dealing with vnode
management issues. These flags include X/O LOCK, FREE, DOOMED, etc.
- All accesses to v_iflag and v_vflag have either been locked or marked with
mp_fixme's.
- Many ASSERT_VOP_LOCKED calls have been added where the locking was not
clear.
- Many functions in vfs_subr.c were restructured to provide for stronger
locking.
Idea stolen from: BSD/OS
module. This adds an ffs_uninit() function that calls ufs_uninit()
and also calls a new softdep_uninitialize() function. Add a stub
for softdep_uninitialize() to cover the non-SOFTUPDATES case.
Reviewed by: mckusick
imposed by the filesystem structure itself remains. With 16k blocks,
the maximum file size is now just over 128TB.
For now, the UFS1 file size limit is left unchanged so as to remain
consistent with RELENG_4, but it too could be removed in the future.
Reviewed by: mckusick
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.
Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.
Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
vnode creation globaly, we allow processes to create vnodes concurently.
In case of concurent creation of vnode for the one ino, we allow processes
to race and then check who wins.
Assuming that concurent creation of vnode for same ino is really rare case,
this is belived to be an improvement, as it just allows concurent creation
of vnodes.
Idea by: bp
Reviewed by: dillon
MFC after: 1 month
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.
Tested on: i386, alpha, sparc64
