to construct the full pathname. It starts to search at the default
mountpoint which is /dev/shm. If this fails it runs through fstab
and searches for shmfs and tmpfs. Whatever it finds will be
statfs()'ed to be checked for Linux' fs magic for shmfs (0x01021994).
Ideally our tmpfs should deliver this fs magic to Linux processes, but
as our tmpfs is considered to be an experimental feature we can not
assume that there is always a tmpfs available.
To make shared memory work in the Linuxulator, force the fs type of
/dev/shm (which can be a symlink) to match what Linux expects. The user
is responsible (info has to be added to the linux base ports and the docs)
to setup a suitable link for /dev/shm.
Noticed by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
Submitted by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
MFC after: 1 month
try to export as much information as we can match.
Requested on: Debian GNU/kFreeBSD list (debian-bsd lists.debian.org) 2010-12
Tested by: Mats Erik Andersson (mats.andersson gisladisker.se)
MFC after: 10 days
be used by linuxolator itself.
Move linux_wait4() to MD path as it requires native struct
rusage translation to struct l_rusage on linux32/amd64.
MFC after: 1 Month.
if no records where returned by VOP_READDIR(). Readdir implementations
allowed to return 0 records when first record is larger then supplied
buffer. In this case trying to execute VOP_READDIR() again causes the
syscall looping forewer.
The goto was there from the day 1, which goes back to 1995 year.
Reported and tested by: Beat G?tzi <beat chruetertee ch>
MFC after: 2 weeks
setting SV_SHP flag and providing pointer to the vm object and mapping
address. Provide simple allocator to carve space in the page, tailored
to put the code with alignment restrictions.
Enable shared page use for amd64, both native and 32bit FreeBSD
binaries. Page is private mapped at the top of the user address
space, moving a start of the stack one page down. Move signal
trampoline code from the top of the stack to the shared page.
Reviewed by: alc
information is set to FreeBSD. It had been falling through to the end
of linux_ioctl_sound() and returning ENOIOCTL. Noticed when running the
Linux ALSA amixer tool.
Add a LINUX_SOUND_MIXER_READ_CAPS ioctl which is used by the Skype
v2.1.0.81 binary.
Reviewed by: gavin
MFC after: 2 weeks
the original amd64 and i386 headers with stubs.
Rename (AMD64|I386)_BUS_SPACE_* to X86_BUS_SPACE_* everywhere.
Reviewed by: imp (previous version), jhb
Approved by: kib (mentor)
With that change the Atheros 9xxx driver is actually usable and does not
panic anymore.
Submitted by: Paul B Mahol <onemda at gmail.com>
MFC after: 2 weeks
driver for example requests the NetCfgInstanceId but doesn't check the
returned status code and will happily access random memory instead.
Submitted by: Paul B Mahol <onemda at gmail.com>
MFC after: 2 weeks
- Many drivers on amd64 are picking system uptime, interrupt time and ticks
via global data structure instead of calling functions for performance
reasons. For now just patch such address so driver will not trigger page
fault when trying to access such data. In future, additional callout may
be added to update data in periodic intervals.
- On amd64 we need to allocate "shadow space" on stack before calling any
function.
Submitted by: Paul B Mahol <onemda at gmail.com>
According to the comment for MmIsAddressValid() there are issues on PAE
kernels using pmap_kextract().
Submitted by: Paul B Mahol <onemda at gmail.com>
thread specific informations.
In order to do that, and in order to avoid KBI breakage with existing
infrastructure the following semantic is implemented:
- For live programs, a new member to the PT_LWPINFO is added (pl_tdname)
- For cores, a new ELF note is added (NT_THRMISC) that can be used for
storing thread specific, miscellaneous, informations. Right now it is
just popluated with a thread name.
GDB, then, retrieves the correct informations from the corefile via the
BFD interface, as it groks the ELF notes and create appropriate
pseudo-sections.
Sponsored by: Sandvine Incorporated
Tested by: gianni
Discussed with: dim, kan, kib
MFC after: 2 weeks
properly aligned structure is atomic on all supported architectures, and
the thread that should see side-effect of assignment is the same thread
that does assignment.
Use a more appropriate conditional to detect the linux ABI.
Suggested by: kib
X-MFC: together with r215664
on FreeBSD (amd64), invocations of "javac" (or "java") eventually
end with the output of "Killed" and exit code 137.
This is caused by:
1. After calling exec() in multithreaded linux program threads are not
destroyed and continue running. They get killed after program being
executed finishes.
2. linux_exit_group doesn't return correct exit code when called not
from group leader. Which happens regularly using sun jvm.
The submitters fix this in a similar way to how NetBSD handles this.
I took the PRs away from dchagin, who seems to be out of touch of
this since a while (no response from him).
The patches committed here are from [2], with some little modifications
from me to the style.
PR: 141439 [1], 144194 [2]
Submitted by: Stefan Schmidt <stefan.schmidt@stadtbuch.de>, gk
Reviewed by: rdivacky (in april 2010)
MFC after: 5 days
and MmAllocateContiguousMemorySpecifyCache().
Those two functions take 64-bit variable(s) for their arguments. On i386
that takes additional 32-bit variable per argument. This is required so
that windrv_wrap() can correctly wrap function that miniport driver calls
with stdcall convention. Similar explanation is provided in subr_ndis.c for
other functions.
Submitted by: Paul B Mahol <onemda at gmail.com>
unsupported futex operation
- for those futex operations which are known to be not supported,
print out which futex operation it is
- shortcut the error return of the unsupported FUTEX_CLOCK_REALTIME in
some cases:
FUTEX_CLOCK_REALTIME can be used to tell linux to use
CLOCK_REALTIME instead of CLOCK_MONOTONIC. FUTEX_CLOCK_REALTIME
however must only be set, if either FUTEX_WAIT_BITSET or
FUTEX_WAIT_REQUEUE_PI are set too. If that's not the case
we can die with ENOSYS right at the beginning.
Submitted by: arundel
Reviewed by: rdivacky (earlier iteration of the patch)
MFC after: 1 week
kernel of exactly the same __FreeBSD_version as the headers module was
compiled against.
Mark our in-tree ABI emulators with DECLARE_MODULE_TIED. The modules
use kernel interfaces that the Release Engineering Team feel are not
stable enough to guarantee they will not change during the life cycle
of a STABLE branch. In particular, the layout of struct sysentvec is
declared to be not part of the STABLE KBI.
Discussed with: bz, rwatson
Approved by: re (bz, kensmith)
MFC after: 2 weeks
- handle compat32 processes;
- remove the checks for copied in addresses to belong into valid
usermode range, proc_rwmem() does this;
- simplify loop reading single string, limit the total amount of strings
collected by ARG_MAX bytes;
- correctly add '\0' at the end of each copied string;
- fix style.
In linprocfs_doprocenviron():
- unlock the process before calling copyin code [1]. The process is held
by pseudofs.
In linprocfs_doproccmdline:
- use linprocfs_doargv() to handle !curproc case for which p_args is not cached.
Reported by: plulnet [1]
Tested by: pluknet
Approved by: des (linprocfs maintainer, previous
version of the patch)
MFC after: 3 weeks
code associated with overflow or with the drain function. While this
function is not expected to be used often, it produces more information
in the form of an errno that sbuf_overflowed() did.
In particular, provide pagesize and pagesizes array, the canary value
for SSP use, number of host CPUs and osreldate.
Tested by: marius (sparc64)
MFC after: 1 month
Now we use a regular mutex instead of a spin mutex. When we enter and exit
the emulator, spinlock_enter() and spinlock_exit() are additionally used.
Move some page table related stuff from x86bios_init() and x86bios_uninit()
to x86bios_map_mem() and x86bios_unmap_mem().
VM86 calls instead of the real mode emulator as a backend. VM86 has been
proven reliable for very long time and it is actually few times faster than
emulation. Increase maximum number of page table entries per VM86 context
from 3 to 8 pages. It was (ridiculously) low and insufficient for new VM86
backend, which shares one context globally. Slighly rearrange and clean up
the emulator backend to accommodate new code. The only visible change here
is stack size, which is decreased from 64K to 4K bytes to sync. with VM86.
Actually, it seems there is no need for big stack in real mode.
MFC after: 1 month
details of the string buffer allocation in one place.
Eliminate the portion of the string buffer that was dedicated to storing
the interpreter name. The pointer to the interpreter name can simply be
made to point to the appropriate argument string.
Reviewed by: kib
shell command are stored in exec*()'s demand-paged string buffer. For
a "buildworld" on an 8GB amd64 multiprocessor, the new order reduces
the number of global TLB shootdowns by 31%. It also eliminates about
330k page faults on the kernel address space.
Change exec_shell_imgact() to use "args->begin_argv" consistently as
the start of the argument and environment strings. Previously, it
would sometimes use "args->buf", which is the start of the overall
buffer, but no longer the start of the argument and environment
strings. While I'm here, eliminate unnecessary passing of "&length"
to copystr(), where we don't actually care about the length of the
copied string.
Clean up the initialization of the exec map. In particular, use the
correct size for an entry, and express that size in the same way that
is used when an entry is allocated. The old size was one page too
large. (This discrepancy originated in 2004 when I rewrote
exec_map_first_page() to use sf_buf_alloc() instead of the exec map
for mapping the first page of the executable.)
Reviewed by: kib
- Rename tdsignal() to tdsendsignal() and make it private to kern_sig.c.
- Add tdsignal() and tdksignal() routines that mirror psignal() and
pksignal() except that they accept a thread as an argument instead of
a process. They send a signal to a specific thread rather than to an
individual process.
Reviewed by: kib
syscalls. On the dynamic syscall deregistration, wait until all
threads leave the syscall code. This somewhat increases the safety
of the loadable modules unloading.
Reviewed by: jhb
Tested by: pho
MFC after: 1 month
Clang generates the following warnings when building subr_usbd.c:
| subr_usbd.c:598:13: warning: promoted type 'int' of K&R function
| parameter is not compatible with the parameter type 'uint8_t' (aka
| 'unsigned char') declared in a previous prototype
| subr_usbd.c:627:13: warning: promoted type 'int' of K&R function
| parameter is not compatible with the parameter type 'uint8_t' (aka
| 'unsigned char') declared in a previous prototype
| subr_usbd.c:649:13: warning: promoted type 'int' of K&R function
| parameter is not compatible with the parameter type 'uint8_t' (aka
| 'unsigned char') declared in a previous prototype
Instead of just ANSIfying these three prototypes, do it for the entire
file.
Spotted by: clang
Intention of this commit is to let us take a full advantage
of libusb(8) ported to Linux. This decreases a possibility of getting
any collisions within ioctl() "command" space, especially with
relation to LINUX_SNDCTL_SEQ... stuff.
Basically, we provide commands, that will be mapped in the kernel
to correct ones and forward those to the USB layer. Port enabling
functionality brought with this patch is here:
http://www.freebsd.org/cgi/query-pr.cgi?pr=146895
Bump __FreeBSD_version to catch, since which version installing a
port makes sense.
This patch should bring no regressions. So far, only i386 is tested.
Tested by: thompsa@
Reviewed by: thompsa@
OKed by: netchild@
Extend struct sysvec with three new elements:
sv_fetch_syscall_args - the method to fetch syscall arguments from
usermode into struct syscall_args. The structure is machine-depended
(this might be reconsidered after all architectures are converted).
sv_set_syscall_retval - the method to set a return value for usermode
from the syscall. It is a generalization of
cpu_set_syscall_retval(9) to allow ABIs to override the way to set a
return value.
sv_syscallnames - the table of syscall names.
Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding
the call to cpu_set_syscall_retval().
The new functions syscallenter(9) and syscallret(9) are provided that
use sv_*syscall* pointers and contain the common repeated code from
the syscall() implementations for the architecture-specific syscall
trap handlers.
Syscallenter() fetches arguments, calls syscall implementation from
ABI sysent table, and set up return frame. The end of syscall
bookkeeping is done by syscallret().
Take advantage of single place for MI syscall handling code and
implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and
PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the
thread is stopped at syscall entry or return point respectively. The
EXEC flag augments SCX and notifies debugger that the process address
space was changed by one of exec(2)-family syscalls.
The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are
changed to use syscallenter()/syscallret(). MIPS and arm are not
converted and use the mostly unchanged syscall() implementation.
Reviewed by: jhb, marcel, marius, nwhitehorn, stas
Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc),
stas (mips)
MFC after: 1 month
variable and can cause problems, without the cliplist handling it works
without problems
- improve the cliplist error handling
- fix VIDIOCGTUNER and VIDIOCSMICROCODE (still no hardware available to test)
Submitted by: J.R. Oldroyd <jr@opal.com>
X-MFC after: soon (together with all the v4l stuff)
mostly work on 64bit host.
The work is based on an original patch submitted by emaste, obtained
from Sandvine's source tree.
Reviewed by: jhb
MFC after: 1 week
A nice thing about POSIX 2008 is that it finally standardizes a way to
obtain file access/modification/change times in sub-second precision,
namely using struct timespec, which we already have for a very long
time. Unfortunately POSIX uses different names.
This commit adds compatibility macros, so existing code should still
build properly. Also change all source code in the kernel to work
without any of the compatibility macros. This makes it all a less
ambiguous.
I am also renaming st_birthtime to st_birthtim, even though it was a
local extension anyway. It seems Cygwin also has a st_birthtim.
within the VBE interrupt handler. Unfortunately it was causing real mode
page faults because we were fetching instructions from bogus addresses.
Pass me the pointyhat, please.
PR: kern/144654
MFC after: 3 days
to the image_params struct instead of several members of that struct
individually. This makes it easier to expand its arguments in the future
without touching all platforms.
Reviewed by: jhb
According to POSIX open() must return ENOTDIR when the path name does
not refer to a path name. Change vn_open() to respect this flag. This
also simplifies the Linuxolator a bit.
- Print the initial memory map when bootverbose is set.
- Change the page fault address format from linear to %cs:%ip style.
- Move duplicate code into a newly added function.
- Add strictly aligned memory access for distant future. ;-)
sysv_{msg,sem,shm}.c files.
Mark SysV IPC freebsd32 syscalls as NOSTD and add required
SYSCALL_INIT_HELPER/SYSCALL32_INIT_HELPERs to provide auto
register/unregister on module load.
This makes COMPAT_FREEBSD32 functional with SysV IPC compiled and loaded
as modules.
Reviewed by: jhb
MFC after: 2 weeks
FOr SYSCALL32_MODULE_HELPER, use "sys32/<syscallname>" module name.
This avoids modules name conflict when compat32 syscall does not
need shims.
Note that SYSCALL_MODULE_HELPER is going to be unused in the tree by
several next commits.
Suggested by: jhb
MFC after: 2 weeks
for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32
option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts
of the kernel and enhances the freebsd32 compatibility code to support
big-endian platforms.
Reviewed by: kib, jhb
On Linux, /proc/<pid>/fd is comparable to fdescfs, where it allows you
to inspect the file descriptors used by each process. Glibc's ttyname()
works by performing a readlink() on these nodes, since all nodes in this
directory are symlinks.
It is a bit hard to implement this in linprocfs right now, so I am not
going to bother. Add a way to make ttyname(3) work, by adding a
/proc/<pid>/fd symlink, which points to /dev/fd only if the calling
process matches. When fdescfs is mounted, this will cause the
readlink() in ttyname() to fail, causing it to fall back on manually
finding a matching node in /dev.
Discussed on: emulation@
this matches the Linux behavior.
- Check if we have sufficient space allocated for socket structure, which
fixes a buffer overflow when wrong length is being passed into the
emulation layer. [1]
PR: kern/138860
Submitted by: Mateusz Guzik <mjguzik gmail com>
Reported by: Alexander Best [1]
MFC after: 2 weeks
With this change, Linux binaries can work with our libusb(3) when
it's compiled against our header files on GNU/Linux system -- this
solves the problem with differences between /dev layouts.
With ported libusb(3), I am able to use my USB JTAG cable with Linux
binaries that support it.
Reviewed by: thompsa
---snip---
Add video clipping support but with the caveats below.
Background info:
Video clipping allows the user to provide either a series of clip rectangles
or a clip bitmap to the driver and have the driver mask the video according
to the clipping specs provided.
Adding support for clipping to the FreeBSD Linux emulator is problematic
because it seems that this feature is not supported by many drivers and
therefore it is ignored by many applications. Unfortunately, when not
using it, rather than passing in a null clipping list, some apps leave the
clipping fields uninitialized, casuing random values to be passed in. In
the case where the driver does not use the clipping info, this is not a
problem (although it is bad form). But the Linux emulator does not know
which drivers will use this and which won't, so the Linux emulator must
try to handle this clip list, and deal gracefully with cases where the
values seem to be uninitialized.
Video clipping info is passed in using the VIDIOCSWIN ioctl in two fields
in the video_window structure: the integer clipcount and the pointer clips.
How the linuxulator handles this from this commit on:
* if (clipcount == VIDEO_CLIP_BITMAP)
The clips variable is a void * pointer to a 128*625 byte
(1024*625 bit) memory area containing a bitmap of the clipping area.
The pointer in the video_window structure is copied, but no
video_clip structures are copied.
* if (clipcount > 0 && clipcount <= 16384)
The clips variable is pointer to a list of video_clip structures. Up
to clipcount structures are copied and passed to the driver.
The upper limit of 16384 was imposed here so that user code that does
not properly initialize clipcount falls through below and no attempt
is made to copy an uninitialized list. This value was found by
examining Linux drivers that support the clip list.
* else
The clipcount is either negative (but not VIDEO_CLIP_BITMAP), zero or
positive (> 16384).
All these cases are treated as invalid data. Both the clipcount field
and clips pointer are forced to zero/NULL and passed to the driver.
It should be noted that, at the time of developing this V4L emulator code,
the pwc(4) V4L driver does not support clipping.
Submitted by: J.R. Oldroyd <fbsd@opal.com>
MFC after: 1 month
---snip---
native devices which support the v4l API from processes running within
the linuxulator, e.g. skype or flash can access the multimedia/pwcbsd driver.
Not tested is firmware upload, framebuffer stuff and video tuner stuff
due to lack of hardware.
The clipping part (VIDIOCSWIN) needs a little bit of further work (partly
in progress, but can not be tested due to lack of a suitable device).
The submitter tested this sucessfully with Skype and flash apps on amd64 and
i386 with the multimedia/pwcbsd driver.
Submitted by: J.R. Oldroyd <fbsd@opal.com>
kern.ngroups+1. kern.ngroups can range from NGROUPS_MAX=1023 to
INT_MAX-1. Given that the Windows group limit is 1024, this range
should be sufficient for most applications.
MFC after: 1 month
When renaming a directory it passes through several intermediate
states. First its new name will be created causing it to have two
names (from possibly different parents). Next, if it has different
parents, its value of ".." will be changed from pointing to the old
parent to pointing to the new parent. Concurrently, its old name
will be removed bringing it back into a consistent state. When fsck
encounters an extra name for a directory, it offers to remove the
"extraneous hard link"; when it finds that the names have been
changed but the update to ".." has not happened, it offers to rewrite
".." to point at the correct parent. Both of these changes were
considered unexpected so would cause fsck in preen mode or fsck in
background mode to fail with the need to run fsck manually to fix
these problems. Fsck running in preen mode or background mode now
corrects these expected inconsistencies that arise during directory
rename. The functionality added with this update is used by fsck
running in background mode to make these fixes.
Solution:
This update adds three new fsck sysctl commands to support background
fsck in correcting expected inconsistencies that arise from incomplete
directory rename operations. They are:
setcwd(dirinode) - set the current directory to dirinode in the
filesystem associated with the snapshot.
setdotdot(oldvalue, newvalue) - Verify that the inode number for ".."
in the current directory is oldvalue then change it to newvalue.
unlink(nameptr, oldvalue) - Verify that the inode number associated
with nameptr in the current directory is oldvalue then unlink it.
As with all other fsck sysctls, these new ones may only be used by
processes with appropriate priviledge.
Reported by: jeff
Security issues: rwatson
target one. Since r184058, linux_do_tkill() calls tdsignal() instead of
kill(), without checking for validity of supplied signal number. Prevent
panic when supplied signal is 0 by finishing work after checks.
Found and tested by: scf
MFC after: 3 days
native devices which support the v4l API from processes running within
the linuxulator, e.g. skype or flash can access the multimedia/pwcbsd driver.
Not tested is firmware upload, framebuffer stuff and video tuner stuff
due to lack of hardware.
The clipping part (VIDIOCSWIN) needs a little bit of further work (partly
in progress, but can not be tested due to lack of a suitable device).
The submitter tested this sucessfully with Skype and flash apps on amd64 and
i386 with the multimedia/pwcbsd driver.
Submitted by: J.R. Oldroyd <fbsd@opal.com>
Right now <sys/termios.h> includes <sys/ttycom.h>, which provides the
TTY ioctls to the svr4 code. We need both struct termios and the ioctls,
so include <sys/tty.h> for now.
well-known race condition, which elimination was the reason for the
function appearance in first place. If sigmask supplied as argument to
pselect() enables a signal, the signal might be delivered before thread
called select(2), causing lost wakeup. Reimplement pselect() in kernel,
making change of sigmask and sleep atomic.
Since signal shall be delivered to the usermode, but sigmask restored,
set TDP_OLDMASK and save old mask in td_oldsigmask. The TDP_OLDMASK
should be cleared by ast() in case signal was not gelivered during
syscall execution.
Reviewed by: davidxu
Tested by: pho
MFC after: 1 month
while in kernel mode, and later changing signal mask to block the
signal, was fixed for sigprocmask(2) and ptread_exit(3). The same race
exists for sigreturn(2), setcontext(2) and swapcontext(2) syscalls.
Use kern_sigprocmask() instead of direct manipulation of td_sigmask to
reschedule newly blocked signals, closing the race.
Reviewed by: davidxu
Tested by: pho
MFC after: 1 month
kern_sigprocmask() to properly notify other possible candidate threads
for signal delivery.
Since sigsuspend() shall only return to usermode after a signal was
delivered, do cursig/postsig loop immediately after waiting for
signal, repeating the wait if wakeup was spurious due to race with
other thread fetching signal from the process queue before us. Add
thread_suspend_check() call to allow the thread to be stopped or killed
while in loop.
Modify last argument of kern_sigprocmask() from boolean to flags,
allowing the function to be called with locked proc. Convertion of the
callers that supplied 1 to the old argument will be done in the next
commit, and due to SIGPROCMASK_OLD value equial to 1, code is formally
correct in between.
Reviewed by: davidxu
Tested by: pho
MFC after: 1 month
no matter whether we are compiled as module or if our default of the
net.inet6.ip6.v6only sysctl already matches what we would set.
This avoids unnecessary complications with modules, VIMAGES, INET6 and
the sysctl value, especially considering that most users will use
linux compat as a module.
Discussed with: kib, rwatson (weeks ago)
Reviewed by: rwatson
MFC after: 6 weeks
- Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and
ROM area separately. Most notably, ROM area is mapped as device memory
(uncacheable) as it should be. User memory is dynamically allocated and
free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and
potentially dangerous x86bios_alloc.c. If this emulator ever grows to
support non-PC hardware, we may implement it with rman(9) later.
- Move all host-specific initializations from x86emu_util.c to x86bios.c and
remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not
supported. We may use bus_space(9) later when the KPI is fixed.
- Replace all bzero() calls for emulated registers with more obviously named
x86bios_init_regs(). This function also initializes DS and SS properly.
- Add x86bios_get_intr(). This function checks if the interrupt vector is
available for the platform. It is not necessary for PC-compatible hardware
but it may be needed later. ;-)
- Do not try turning off monitor if DPMS does not support the state.
- Allocate stable memory for VESA OEM strings instead of just holding
pointers to them. They may or may not be accessible always. Fix a memory
leak of video mode table while I am here.
- Add (experimental) BIOS POST call for vesa(4). This function calls VGA
BIOS POST code from the current VGA option ROM. Some video controllers
cannot save and restore the state properly even if it is claimed to be
supported. Usually the symptom is blank display after resuming from suspend
state. If the video mode does not match the previous mode after restoring,
we try BIOS POST and force the known good initial state. Some magic was
taken from NetBSD (and it was taken from vbetool, I believe.)
- Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4)
to identify who owns the VESA BIOS. This is very useful for multi-display
adapter setup. By default, the POST video controller is automatically
probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding
vgapci unit number. You may override it from loader but it is very unlikely
to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be
matched because ISA controller does not have necessary device IDs.
- Fix a long standing bug in state save/restore function. The state buffer
pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked,
that's because BX was always zero. :-)
- Clean up register initializations more clearer per VBE 3.0.
- Fix a lot of style issues with vesa(4).
first and the native ia32 compat as middle (before other things).
o(ld)brandinfo as well as third party like linux, kfreebsd, etc.
stays on SI_ORDER_ANY coming last.
The reason for this is only to make sure that even in case we would
overflow the MAX_BRANDS sized array, the native FreeBSD brandinfo
would still be there and the system would be operational.
Reviewed by: kib
MFC after: 1 month
- Remove CS and IP registers from x86bios.h. They have no use for us.
- Adjust register dump to make it little bit more useful for debugging.
Submitted by: paradox (ddkprog yahoo com)[1] (initial version)
FreeBSD 8, the compatibility shims should be built not just when FreeBSD 7
compatibility is requested, but also when compatibility with any older
FreeBSD version where that feature was present is requested.o
Without this patch, a kernel config that sets COMPAT_FREEBSD6 but not *7
would fail to build due to inconsistencies between the declaration of the
compatibility shims and their use in the SysV code.
There are similar errors in other *proto.h headers in the tree.
MFC after: 3 weeks
longs. Since 32bit processes longs are 4 bytes, 64bit kernel may copy in
or out 4 bytes more then the process expected.
Calculate the amount of bytes to copy taking into account size of fd_set
for the current process ABI.
Diagnosed and tested by: Peter Jeremy <peterjeremy acm org>
Reviewed by: jhb
MFC after: 1 week
correctly and do not match a colliding Debian GNU/kFreeBSD
brandinfo statements.
For this mark the Debian GNU/kFreeBSD brandinfo that it must have
an .note.ABI-tag section and ignore the old EI_OSABI brandinfo
when comparing a possibly colliding set of options.
Due to SYSINIT we add the brandinfo in a non-deterministic order,
so native FreeBSD is not always first. We may want to consider
to force native FreeBSD to come first as well.
The only way a problem could currently be noticed is when running an
i386 binary without the .note.ABI-tag on amd64 and the Debian GNU/kFreeBSD
brandinfo was matched first, as the fallback to ld-elf32.so.1 does
not exist in that case.
Reported and tested by: ticso
In collaboration with: kib
MFC after: 3 days
Handle GNU/Linux according to LSB Core Specification 4.0,
Chapter 11. Object Format, 11.8. ABI note tag.
Also check the first word of desc, not only name, according to
glibc abi-tags specification to distinguish between Linux and
kFreeBSD.
Add explicit handling for Debian GNU/kFreeBSD, which runs
on our kernels as well [2].
In {amd64,i386}/trap.c, when checking osrel of the current process,
also check the ABI to not change the signal behaviour for Linux
binary processes, now that we save an osrel version for all three
from the lists above in struct proc [2].
These changes make it possible to run FreeBSD, Debian GNU/kFreeBSD
and Linux binaries on the same machine again for at least i386 and
amd64, and no longer break kFreeBSD which was detected as GNU(/Linux).
PR: kern/135468
Submitted by: dchagin [1] (initial patch)
Suggested by: kib [2]
Tested by: Petr Salinger (Petr.Salinger seznam.cz) for kFreeBSD
Reviewed by: kib
MFC after: 3 days
several critical bugs, including race conditions and lock order issues:
Replace the single rwlock, ifnet_lock, with two locks, an rwlock and an
sxlock. Either can be held to stablize the lists and indexes, but both
are required to write. This allows the list to be held stable in both
network interrupt contexts and sleepable user threads across sleeping
memory allocations or device driver interactions. As before, writes to
the interface list must occur from sleepable contexts.
Reviewed by: bz, julian
MFC after: 3 days
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
old ABI versions of the relevant control system call (e.g.
freebsd7_freebsd32_msgctl() instead of freebsd32_msgctl() for msgsys()).
Approved by: re (kib)
restrictions) were found to be inadequately described by a boolean.
Define a new parameter type with three values (disable, new, inherit)
to handle these and future cases.
Approved by: re (kib), bz (mentor)
Discussed with: rwatson
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
if the new file mode is the same as it was before; however, this
optimization must be disabled for filesystems that support NFSv4 ACLs.
Chmod uses pathconf(2) to determine whether this is the case - however,
pathconf(2) always follows symbolic links, while the 'chmod -h' doesn't.
This change adds lpathconf(3) to make it possible to solve that problem
in a clean way.
Reviewed by: rwatson (earlier version)
Approved by: re (kib)
specific macros for each audit argument type. This makes it easier to
follow call-graphs, especially for automated analysis tools (such as
fxr).
In MFC, we should leave the existing AUDIT_ARG() macros as they may be
used by third-party kernel modules.
Suggested by: brooks
Approved by: re (kib)
Obtained from: TrustedBSD Project
MFC after: 1 week
- The uid/cuid members of struct ipc_perm are now uid_t instead of unsigned
short.
- The gid/cgid members of struct ipc_perm are now gid_t instead of unsigned
short.
- The mode member of struct ipc_perm is now mode_t instead of unsigned short
(this is merely a style bug).
- The rather dubious padding fields for ABI compat with SV/I386 have been
removed from struct msqid_ds and struct semid_ds.
- The shm_segsz member of struct shmid_ds is now a size_t instead of an
int. This removes the need for the shm_bsegsz member in struct
shmid_kernel and should allow for complete support of SYSV SHM regions
>= 2GB.
- The shm_nattch member of struct shmid_ds is now an int instead of a
short.
- The shm_internal member of struct shmid_ds is now gone. The internal
VM object pointer for SHM regions has been moved into struct
shmid_kernel.
- The existing __semctl(), msgctl(), and shmctl() system call entries are
now marked COMPAT7 and new versions of those system calls which support
the new ABI are now present.
- The new system calls are assigned to the FBSD-1.1 version in libc. The
FBSD-1.0 symbols in libc now refer to the old COMPAT7 system calls.
- A simplistic framework for tagging system calls with compatibility
symbol versions has been added to libc. Version tags are added to
system calls by adding an appropriate __sym_compat() entry to
src/lib/libc/incldue/compat.h. [1]
PR: kern/16195 kern/113218 bin/129855
Reviewed by: arch@, rwatson
Discussed with: kan, kib [1]
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
in the type field of system call tables. Specifically, one can now use
the 'NO*' types as flags in addition to the 'COMPAT*' types. For example,
to tag 'COMPAT*' system calls as living in a KLD via NOSTD. The COMPAT*
type is required to be listed first in this case.
- Add new functions 'type()' and 'flag()' to the embedded awk script in
makesyscalls.sh that return true if a requested flag is found in the
type field ($3). The flag() function checks all of the flags in the
field, but type() only checks the first flag. type() is meant to be
used in the top-level "switch" statement and flag() should be used
otherwise.
- Retire the CPT_NOA type, it is now replaced with "COMPAT|NOARGS" using
the flags approach.
- Tweak the comment descriptions of COMPAT[46] system calls so that they
say "freebsd[46] foo" rather than "old foo".
- Document the COMPAT6 type.
- Sync comments in compat32 syscall table with the master table.
any open file descriptors >= 'lowfd'. It is largely identical to the same
function on other operating systems such as Solaris, DFly, NetBSD, and
OpenBSD. One difference from other *BSD is that this closefrom() does not
fail with any errors. In practice, while the manpages for NetBSD and
OpenBSD claim that they return EINTR, they ignore internal errors from
close() and never return EINTR. DFly does return EINTR, but for the common
use case (closing fd's prior to execve()), the caller really wants all
fd's closed and returning EINTR just forces callers to call closefrom() in
a loop until it stops failing.
Note that this implementation of closefrom(2) does not make any effort to
resolve userland races with open(2) in other threads. As such, it is not
multithread safe.
Submitted by: rwatson (initial version)
Reviewed by: rwatson
MFC after: 2 weeks
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.
Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
