Commit Graph

1634 Commits

Author SHA1 Message Date
Andrew Thompson
c89d41e5ff Change over the usb kernel options to the new stack (retaining existing
naming). The old usb stack can be compiled in my prefixing the name with 'o'.
2009-02-23 18:34:56 +00:00
Andrew Thompson
e31a070263 Add uslcom to the build too.
Reminded by:	Michael Butler
2009-02-15 23:40:29 +00:00
Andrew Thompson
e4edc14efd Switch over GENERIC kernels to USB2 by default.
Tested by:	make universe
2009-02-15 22:33:44 +00:00
Marcel Moolenaar
5d1df4b56d Mark the BSP as being awake. This supresses the message
that not all usable CPUs could be woken up...
2009-02-10 20:29:57 +00:00
Warner Losh
047e5fdabc When bouncing pages, allow a new option to preserve the intra-page
offset.  This is needed for the ehci hardware buffer rings that assume
this behavior.

This is an interim solution, and a more general one is being worked
on.  This solution doesn't break anything that doesn't ask for it
directly.  The mbuf and uio variants with this flag likely don't work
and haven't been tested.

Universe builds with these changes.  I don't have a huge-memory
machine to test these changes with, but will be happy to work with
folks that do and hps if this changes turns out not to be sufficient.

Submitted by:	alfred@ from Hans Peter Selasky's original
2009-02-08 22:54:58 +00:00
Wojciech A. Koszek
eb0a4a4b80 Don't forget to create opt_agp.h on ia64, which also uses agp(4). 2009-02-07 09:57:14 +00:00
John Baldwin
148a5cf9e8 Tweak the ia64 machine check handling code to not register new sysctl nodes
while holding a spin mutex.  Instead, it now shoves the machine check
records onto a queue that is later drained to add sysctl nodes for each
record.  While a routine to drain the queue is present, it is not currently
called.

Reviewed by:	marcel
2009-02-04 18:44:29 +00:00
Alan Cox
2dad52b0c5 Correct an error in revision 1.170 of this file. When get_pv_entry() is
forced to reclaim pv entries, the one pv entry that it returns should not
be freed.
2009-01-18 08:00:55 +00:00
Warner Losh
db3cd725a5 AT_DEBUG and AT_BRK were OBE like 10 years ago, so retire them.
Reviewed by:	peter
2008-12-17 06:56:58 +00:00
Ed Schouten
bfba40a452 Remove "[KEEP THIS!]" from COMPAT_43TTY. It's not really that important.
Sgtty is a programming interface that has been replaced by termios over
the years. In June we already removed <sgtty.h>, which exposes the
ioctl()'s that are implemented by this interface. The importance of this
flag is overrated right now.
2008-12-02 19:09:08 +00:00
Konstantin Belousov
b4cf0e62f4 Add sv_flags field to struct sysentvec with intention to provide description
of the ABI of the currently executing image. Change some places to test
the flags instead of explicit comparing with address of known sysentvec
structures to determine ABI features.

Discussed with:	dchagin, imp, jhb, peter
2008-11-22 12:36:15 +00:00
Marcel Moolenaar
ff8c51cf3e Define mb(), rmb() and wmb() for real. 2008-11-22 06:56:49 +00:00
Kip Macy
db7f0b974f - bump __FreeBSD version to reflect added buf_ring, memory barriers,
and ifnet functions

- add memory barriers to <machine/atomic.h>
- update drivers to only conditionally define their own

- add lockless producer / consumer ring buffer
- remove ring buffer implementation from cxgb and update its callers

- add if_transmit(struct ifnet *ifp, struct mbuf *m) to ifnet to
  allow drivers to efficiently manage multiple hardware queues
  (i.e. not serialize all packets through one ifq)
- expose if_qflush to allow drivers to flush any driver managed queues

This work was supported by Bitgravity Inc. and Chelsio Inc.
2008-11-22 05:55:56 +00:00
Dag-Erling Smørgrav
1ede983cc9 Retire the MALLOC and FREE macros. They are an abomination unto style(9).
MFC after:	3 months
2008-10-23 15:53:51 +00:00
Marcel Moolenaar
1800080e68 Atomically increment the number of awoken APs as all APs will
be unleashed here.

Pointed out by: christian.kandeler@hob.de
2008-10-19 20:14:48 +00:00
Peter Wemm
e6592ee55c Collect N identical (or near identical) mkdumpheader() implementations into
one, as threatened in the comment.  Textdump magic can be passed in.
2008-10-01 22:08:53 +00:00
Marius Strobl
6f04e7b9aa Remove ipi_all() and ipi_self() as the former hasn't been used at
all to date and the latter also is only used in ia64 and powerpc
code which no longer serves a real purpose after bring-up and just
can be removed as well. Note that architectures like sun4u also
provide no means of implementing IPI'ing a CPU itself natively
in the first place.

Suggested by:	jhb
Reviewed by:	arch, grehan, jhb
2008-09-28 18:34:14 +00:00
Ed Schouten
6bfa9a2d66 Replace all calls to minor() with dev2unit().
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.

This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.

Reviewed by:	kib
2008-09-27 08:51:18 +00:00
Konstantin Belousov
a8d403e102 Change the static struct sysentvec and struct Elf_Brandinfo initializers
to the C99 style. At least, it is easier to read sysent definitions
that way, and search for the actual instances of sigcode etc.

Explicitely initialize sysentvec.sv_maxssiz that was missed in most
sysvecs.

No objection from:	jhb
MFC after:	1 month
2008-09-24 10:14:37 +00:00
David E. O'Brien
ae72afe0f2 The kernel implemented 'memcmp' is an alias for 'bcmp'. However, memcmp
and bcmp are not the same thing.  'man bcmp' states that the return is
"non-zero" if the two byte strings are not identical.  Where as,
'man memcmp' states that the return is the "difference between the
first two differing bytes (treated as unsigned char values" if the
two byte strings are not identical.

So provide a proper memcmp(9), but it is a C implementation not a tuned
assembly implementation.  Therefore bcmp(9) should be preferred over memcmp(9).
2008-09-23 14:45:10 +00:00
Ed Schouten
bc093719ca Integrate the new MPSAFE TTY layer to the FreeBSD operating system.
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:

- Improved driver model:

  The old TTY layer has a driver model that is not abstract enough to
  make it friendly to use. A good example is the output path, where the
  device drivers directly access the output buffers. This means that an
  in-kernel PPP implementation must always convert network buffers into
  TTY buffers.

  If a PPP implementation would be built on top of the new TTY layer
  (still needs a hooks layer, though), it would allow the PPP
  implementation to directly hand the data to the TTY driver.

- Improved hotplugging:

  With the old TTY layer, it isn't entirely safe to destroy TTY's from
  the system. This implementation has a two-step destructing design,
  where the driver first abandons the TTY. After all threads have left
  the TTY, the TTY layer calls a routine in the driver, which can be
  used to free resources (unit numbers, etc).

  The pts(4) driver also implements this feature, which means
  posix_openpt() will now return PTY's that are created on the fly.

- Improved performance:

  One of the major improvements is the per-TTY mutex, which is expected
  to improve scalability when compared to the old Giant locking.
  Another change is the unbuffered copying to userspace, which is both
  used on TTY device nodes and PTY masters.

Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.

Obtained from:		//depot/projects/mpsafetty/...
Approved by:		philip (ex-mentor)
Discussed:		on the lists, at BSDCan, at the DevSummit
Sponsored by:		Snow B.V., the Netherlands
dcons(4) fixed by:	kan
2008-08-20 08:31:58 +00:00
John Baldwin
70d12a18f2 Export 'struct pcpu' to userland w/o requiring _KERNEL. A few ports
already define _KERNEL to get to this and I'm about to add hooks to
libkvm to access per-CPU data.

MFC after:	1 week
2008-08-19 19:53:52 +00:00
Bjoern A. Zeeb
603724d3ab Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
Alan Cox
36e6513df5 Update bus_dmamem_alloc()'s first call to malloc() such that M_WAITOK is
specified when appropriate.

Reviewed by:	scottl
2008-07-15 03:34:49 +00:00
Xin LI
dbd47f1592 Add HWPMC_HOOKS to GENERIC kernels, this makes hwpmc.ko work out
of the box.
2008-07-07 22:55:11 +00:00
Marcel Moolenaar
d3fc9d46d4 Add inline function ia64_fc_i() to abstract inline assembly.
Use the new inline function in ia64_invalidate_icache().
While there, add proper synchronization so that we know
the fc.i instructions have taken effect when we return.
2008-07-07 17:43:56 +00:00
Ed Schouten
721351876c Remove the unused major/minor numbers from iodev and memdev.
Now that st_rdev is being automatically generated by the kernel, there
is no need to define static major/minor numbers for the iodev and
memdev. We still need the minor numbers for the memdev, however, to
distinguish between /dev/mem and /dev/kmem.

Approved by:	philip (mentor)
2008-06-25 07:45:31 +00:00
Marcel Moolenaar
f9d9182d64 Work-around a compiler optimization bug, that broke libthr. Massive
inlining resulted in constant propagation to the extend that cmpval
was known to the compiler to be URWLOCK_WRITE_OWNER (= 0x80000000U).
Unfortunately, instead of zero-extending the unsigned constant, it
was sign-extended. As such, the cmpxchg instruction was comparing
0x0000000080000000LU to 0xffffffff80000000LU and obviously didn't
perform the exchange.
But, since the value returned by cmpxhg equalled cmpval (when zero-
extended), the _thr_rtld_lock_release() function thought the exchange
did happen and as such returned as if having released the lock. This
was not the case. Subsequent locking requests found rw_state non-zero
and the thread in question entered the kernel and block indefinitely.

The work-around is to zero-extend by casting to uint64_t.
2008-05-28 16:41:02 +00:00
Marcel Moolenaar
2cddc3d722 Account for IPI_PREEMPT. We don't want to call sched_preempt() with
interrupts disabled or with td_intr_nesting_level non-zero.
2008-05-23 19:53:50 +00:00
Alan Cox
d1fdd63483 The VM system no longer uses setPQL2(). Remove it and its helpers. 2008-05-23 04:03:54 +00:00
Marcel Moolenaar
c1e0811ea3 Create the bucket mutexes with MTX_NOWITNESS. There's now a
hard limit of 512 pending mutexes in the witness code and
we can easily have 1 million bucket mutexes initialized before
witness is up and running. Bumping the limit from 512 to 1M
is not really an option here...
2008-05-22 06:27:46 +00:00
Marcel Moolenaar
0fbd447b92 We can call ia64_flush_dirty() when the corresponding process is
locked or not. As such, use PROC_LOCKED() to determine which case
it is and lock the process when not.
2008-05-21 05:15:27 +00:00
Alan Cox
1ec1304bdb Retire pmap_addr_hint(). It is no longer used. 2008-05-18 04:16:57 +00:00
Alan Cox
2d17f90775 Add a stub for pmap_align_superpage() on machines that don't (yet)
implement pmap-level support for superpages.
2008-05-09 23:31:42 +00:00
Marcel Moolenaar
fe39c042ca Unbreak previous commit. While here, refactor the code a bit. 2008-04-25 16:09:03 +00:00
Jeff Roberson
6c47aaae12 - Add an integer argument to idle to indicate how likely we are to wake
from idle over the next tick.
 - Add a new MD routine, cpu_wake_idle() to wakeup idle threads who are
   suspended in cpu specific states.  This function can fail and cause the
   scheduler to fall back to another mechanism (ipi).
 - Implement support for mwait in cpu_idle() on i386/amd64 machines that
   support it.  mwait is a higher performance way to synchronize cpus
   as compared to hlt & ipis.
 - Allow selecting the idle routine by name via sysctl machdep.idle.  This
   replaces machdep.cpu_idle_hlt.  Only idle routines supported by the
   current machine are permitted.

Sponsored by:	Nokia
2008-04-25 05:18:50 +00:00
Poul-Henning Kamp
9b4a8ab7ba Now that all platforms use genclock, shuffle things around slightly
for better structure.

Much of this is related to <sys/clock.h>, which should really have
been called <sys/calendar.h>, but unless and until we need the name,
the repocopy can wait.

In general the kernel does not know about minutes, hours, days,
timezones, daylight savings time, leap-years and such.  All that
is theoretically a matter for userland only.

Parts of kernel code does however care: badly designed filesystems
store timestamps in local time and RTC chips almost universally
track time in a YY-MM-DD HH:MM:SS format, and sometimes in local
timezone instead of UTC.  For this we have <sys/clock.h>

<sys/time.h> on the other hand, deals with time_t, timeval, timespec
and so on.  These know only seconds and fractions thereof.

Move inittodr() and resettodr() prototypes to <sys/time.h>.
Retain the names as it is one of the few surviving PDP/VAX references.

Move startrtclock() to <machine/clock.h> on relevant platforms, it
is a MD call between machdep.c/clock.c.  Remove references to it
elsewhere.

Remove a lot of unnecessary <sys/clock.h> includes.

Move the machdep.disable_rtc_set sysctl to subr_rtc.c where it belongs.
XXX: should be kern.disable_rtc_set really, it's not MD.
2008-04-22 19:38:30 +00:00
Poul-Henning Kamp
0051271e12 Make genclock standard on all platforms.
Thanks to: grehan & marcel for platform support on ia64 and ppc.
2008-04-21 10:09:55 +00:00
Marcel Moolenaar
fca1689378 Sanitize the malloc types: M_PMAP is not used in pmap.c, so don't
define it there. Don't use M_PMAP in mp_machdep.c; define M_SMP
instead.
2008-04-19 04:56:16 +00:00
Marcel Moolenaar
6bdf667b51 Remove cruft we got from Alpha, which was probably inherited
from NetBSD. I.e. make it more like a FreeBSD header.
2008-04-18 02:21:11 +00:00
Marcel Moolenaar
22cc9ba0f0 Use genclock for RTC handling. This eliminates the MD versions for
inittodr() and resettodr(). Have nexus double as the clock device,
because it's the firmware that provides RTC services. We could
create a special (pseudo-) device for it, but that wasn't superior
enough to actually do it. Maybe later...

Requested by: phk
2008-04-15 17:02:23 +00:00
Marcel Moolenaar
495168ba8d Support and switch to the ULE scheduler:
o  Implement IPI_PREEMPT,
o  Set td_lock for the thread being switched out,
o  For ULE & SMP, loop while td_lock points to blocked_lock for
   the thread being switched in,
o  Enable ULE by default in GENERIC and SKI,
2008-04-15 05:02:42 +00:00
Marcel Moolenaar
23080c0bd3 Revision 1.9 changes the delivery mode from the magic constant 0
(i.e. fixed delivery) to SAPIC_DELMODE_LOWPRI. While the commit
log doesn't mention the change in behaviour, it is believed to be
deliberate. In the last 5.5 years this hasn't been a problem. Nor
do I think did it make any difference, but who knows. However, I
do know that it break SMP support for Montecito-based machines.
Switch back to fixed-CPU delivery so that SMP works again. This
gives me some time to look more closely at the problem, as well
as make sure the I-cache validation as it's implemented currently
is sufficient in SMP configurations...
2008-04-14 20:34:45 +00:00
Jeff Roberson
d13829f04a - Pass the irq and not the vector to intr_event_create().
Reviewed by:	marcel
2008-04-11 23:10:39 +00:00
Jeff Roberson
9b33b154b5 - Add the interrupt vector number to intr_event_create so MI code can
lookup hard interrupt events by number.  Ignore the irq# for soft intrs.
 - Add support to cpuset for binding hardware interrupts.  This has the
   side effect of binding any ithread associated with the hard interrupt.
   As per restrictions imposed by MD code we can only bind interrupts to
   a single cpu presently.  Interrupts can be 'unbound' by binding them
   to all cpus.

Reviewed by:	jhb
Sponsored by:	Nokia
2008-04-11 03:26:41 +00:00
Marcel Moolenaar
34aec6b9f8 Unbreak after removal of SI_SUB_MOUNT_ROOT. 2008-04-09 03:32:48 +00:00
John Baldwin
1ee1b68792 Add a MI intr_event_handle() routine for the non-INTR_FILTER case. This
allows all the INTR_FILTER #ifdef's to be removed from the MD interrupt
code.
- Rename the intr_event 'eoi', 'disable', and 'enable' hooks to
  'post_filter', 'pre_ithread', and 'post_ithread' to be less x86-centric.
  Also, add a comment describe what the MI code expects them to do.
- On amd64, i386, and powerpc this is effectively a NOP.
- On arm, don't bother masking the interrupt unless the ithread is
  scheduled in the non-INTR_FILTER case to match what INTR_FILTER did.
  Also, don't bother unmasking the interrupt in the post_filter case if
  we never masked it.  The INTR_FILTER case had been doing this by having
  arm_unmask_irq for the post_filter (formerly 'eoi') hook.
- On ia64, stray interrupts are now masked for the non-INTR_FILTER case.
  They were already masked in the INTR_FILTER case.
- On sparc64, use the a NULL pre_ithread hook and use intr_enable_eoi() for
  both the 'post_filter' and 'post_ithread' hooks to match what the
  non-INTR_FILTER code did.
- On sun4v, retire the ithread wrapper hack by using an appropriate
  'post_ithread' hook instead (it's what 'post_ithread'/'enable' was
  designed to do even in 5.x).

Glanced at by:	piso
Reviewed by:	marius
Requested by:	marius [1], [5]
Tested on:	amd64, i386, arm, sparc64
2008-04-05 19:58:30 +00:00
Marcel Moolenaar
b81b7f0a7d Better implement I-cache invalidation. The previous implementation
was a kluge. This implementation matches the behaviour on powerpc
and sparc64.
While on the subject, make sure to invalidate the I-cache after
loading a kernel module.

MFC after: 2 weeks
2008-03-30 23:09:14 +00:00
Doug Rabson
fa9d9930ca Add kernel module support for nfslockd and krpc. Use the module system
to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k'
option to rpc.lockd and make kernel NLM the default. A user can still
force the use of the old user NLM by building a kernel without NFSLOCKD
and/or removing the nfslockd.ko module.
2008-03-27 11:54:20 +00:00
John Birrell
e483943791 When building a kernel module, define MAXCPU the same as SMP so
that modules work with and without SMP.
2008-03-27 05:03:26 +00:00