Commit Graph

2411 Commits

Author SHA1 Message Date
Roger Hardiman
f2488e30c5 MFS: No longer needed in PicoBSD 0.44 1999-06-15 11:45:25 +00:00
Roger Hardiman
27c2745d8a MFS: No longer needed in PicoBSD 0.44 1999-06-15 11:40:13 +00:00
Roger Hardiman
b8f659fe68 Last commit was incorrect. Remove the 'rp' PCI device 1999-06-14 18:16:51 +00:00
Roger Hardiman
45f63ade9b Comment out the PCI Comtrol Rocketport entries.
The PicoBSD 'isp' build fails when both the PCI and ISA versions of the
'rp' driver are included at the same time
1999-06-14 18:08:17 +00:00
Roger Hardiman
a48da6e82e Update to PicoBSD 0.44 from RELENG_3 1999-06-14 16:48:23 +00:00
Roger Hardiman
d7e03a941e Update to PicoBSD 0.44 (from RELENG_3) 1999-06-14 16:36:50 +00:00
Roger Hardiman
75663a1769 Update to PicoBSD 0.44 from RELENG_3 1999-06-14 15:45:56 +00:00
Roger Hardiman
a4d0e7358a Update to PicoBSD 0.44 from RELENG_ 1999-06-14 15:45:41 +00:00
Jordan K. Hubbard
85cfadeb74 Remove apple.com from time server list.
Submitted by:	Mike Haro
1999-06-09 09:18:33 +00:00
Jordan K. Hubbard
47b06c4f2f Various edits to shrink fixit and enable dhcp-client 1999-06-09 09:08:22 +00:00
Ruslan Ermilov
ea1dce7007 Switch to proper mbr.
OK'ed by:	jkh,rnordier
1999-06-04 10:01:53 +00:00
Jordan K. Hubbard
14870ecf9f Don't put CVS files in ports. It's kinda useful for cvs updating
a ports tree which was installed initially with the system later,
but this is probably not the general case (user CVSups the repository
rather than the checked-out bits) and it's penalizing everyone else
with excessive inode consumption.
1999-05-29 00:42:05 +00:00
Bill Paul
74e5e304a4 Fix support for the PNIC II. Earlier I had assumed that the PNIC II was
similar to the PNIC I (supported by the pn driver). In fact, it's really
a Macronix 98715A with wake on LAN support added. According to LinkSys,
the PNIC II was jointly developed by Lite-On and Macronis. I get the
feeling Macronix did most of the work. (The datasheet has the Macronix
logo on it, and is in fact nearly identical to the 98715 datasheet, except
for the extra wake on LAN registers.) In any case, the PNIC II works just
fine with the Macronix driver.

The changes are:

- Move PCI ID for the PNIC II from the pn driver to the mx driver.
- Mention PNIC II support in mx.4.
- Mention PNIC II support in RELNOTES.TXT and HARDWARE.TXT.
1999-05-28 18:43:25 +00:00
Jordan K. Hubbard
0550320175 Do a clean-up pass on error/warning messages. 1999-05-27 10:32:50 +00:00
Tim Vanderhoek
e87212489a Update for post 3.2R since this'll be quickly forgotten otherwise.
Say, isn't about time for a -SNAP release?
1999-05-24 23:52:46 +00:00
Tim Vanderhoek
15e406d3ee MF3S: typo 1999-05-24 23:44:57 +00:00
Tim Vanderhoek
6cc2d0051d Typos (one reported in misc/11876 by Andrew Boothman <andrew@cream.org>) 1999-05-24 23:32:00 +00:00
Roger Hardiman
6d30ce34c5 Update PicoBSD kernel config files. Changes are
removal of bio, tty, net
  removal of quotes
  switches from isa? to nexus? or atkbdc?
  additional comments

  These bring the kernel config files in sync with those in
  RELENG_3
1999-05-24 17:27:30 +00:00
Brian Somers
3da2229c1c Use RELENG_3 as an example, not RELENG_2_2. 1999-05-23 20:01:20 +00:00
Bill Paul
33b3ee3898 - Fix up some comments in if_wi.c (no code changes)
- Mention that the 6Mbps turbo adapters are supported in HARDWARE.TXT
  and RELNOTES.TXT and the wi.4 man page
- Mention turbo adapters in the wicontrol.8 man page and provide a
  complete table of available transmit speed settings
1999-05-22 16:12:54 +00:00
David E. O'Brien
a5b3fd5d93 Remove `ix' driver. Justin Gibbs added support for the EtherExpress16 to
the `ie' driver in rev 1.41 of if_ie.c on 1997/04/14.  Thus retiring the
`ix' driver.

Forgotten by:	gibbs
1999-05-22 02:33:08 +00:00
David E. O'Brien
af28dc5848 Remove duplicated `ex0' entry. 1999-05-21 18:28:32 +00:00
Jordan K. Hubbard
99ee419296 Don't do anything on alpha machines. 1999-05-21 11:00:56 +00:00
Ollivier Robert
d4df77b1a5 ftp3.fr.freebsd.org (UVSQ, Versailles, France) has been available for a long
time.

Submitted by:	Rémy Card <Remy.Card@csi.uvsq.fr>
1999-05-21 07:10:35 +00:00
Bill Paul
ab431312b4 This commit adds driver support for PCI fast ethernet cards based on the
ADMtek AL981 "Comet" chipset. The AL981 is yet another DEC tulip clone,
except with simpler receive filter options. The AL981 has a built-in
transceiver, power management support, wake on LAN and flow control.
This chip performs extremely well; it's on par with the ASIX chipset
in terms of speed, which is pretty good (it can do 11.5MB/sec with TCP
easily).

I would have committed this driver sooner, except I ran into one problem
with the AL981 that required a workaround. When the chip is transmitting
at full speed, it will sometimes wedge if you queue a series of packets
that wrap from the end of the transmit descriptor list back to the
beginning. I can't explain why this happens, and none of the other tulip
clones behave this way. The workaround this is to just watch for the end
of the transmit ring and make sure that al_start() breaks out of its
packet queuing loop and waiting until the current batch of transmissions
completes before wrapping back to the start of the ring. Fortunately, this
does not significantly impact transmit performance.

This is one of those things that takes weeks of analysis just to come
up with two or three lines of code changes.
1999-05-21 04:37:48 +00:00
Jordan K. Hubbard
d06edb61fa Add CHAP/PAP question to the ppp setup dialog, simplifying things considerably
for some.

Submitted by:	Jack O'Neill <jack@germanium.xtalwind.net>
1999-05-19 10:49:46 +00:00
Jordan K. Hubbard
71e13b47ac Add ftp5.uk.freebsd.org
Submitted by:	Roger Hardiman <roger@cs.strath.ac.uk>
1999-05-19 08:56:56 +00:00
Nick Hibma
c00ffac3b8 Update the list of devices supported (nothing spectacular) 1999-05-18 22:48:18 +00:00
Jordan K. Hubbard
4ee02f4bb8 deal with a.out ldconfig paths also. 1999-05-18 00:44:28 +00:00
Poul-Henning Kamp
6c2859940e More crypto bogosity.
(I just built a current snap-shot)
1999-05-16 12:21:54 +00:00
Poul-Henning Kamp
ce737050df INSTALL.TXT is gone in -current (despite what Jordan says :-)
kerberisIV requires crypto as well.
1999-05-16 08:07:34 +00:00
Poul-Henning Kamp
249b950899 cp ${KERNEL} instead of cp kernel 1999-05-15 19:05:40 +00:00
Jordan K. Hubbard
de37d1149a Small typo in windowmaker startup line. 1999-05-15 15:05:08 +00:00
Jordan K. Hubbard
b7f708e677 o Prevent alpha installs from grabbing x86 bits and vice-versa, at least
on CDs and FTP sites.

o Collapse some redundant code.

o Fix typo'd menu.

o Restrict searches properly to packages rather than categories.

o Small tweaks to signal handling.

All RELENG_3 candidates.
1999-05-15 14:34:22 +00:00
Jordan K. Hubbard
429d613afc target is ${KERNEL}, not kernel.
Noticed by:	"John W. DeBoskey" <jwd@unx.sas.com>
1999-05-15 11:51:39 +00:00
Jordan K. Hubbard
be06522a93 Do more impressive things for windowmaker. 1999-05-14 15:04:24 +00:00
Jordan K. Hubbard
9c422527ea DTRT for "Latest" search keywords. 1999-05-14 14:57:59 +00:00
Jordan K. Hubbard
9e1ec576ed Be properly verbose. 1999-05-14 14:29:50 +00:00
Jordan K. Hubbard
1398785241 Correct return status logic a bit. 1999-05-14 12:15:34 +00:00
Jordan K. Hubbard
992109823e Yikes! I almost left out the 3D Labs server. :) 1999-05-14 07:15:05 +00:00
Jordan K. Hubbard
bae5164b37 fix stupid typo. 1999-05-13 02:49:23 +00:00
Jordan K. Hubbard
61bdb7bc9b Correct a bug which could cause a segfault if there is no uc_devlist
data.

Noticed by:	Bill Swingle <bill@cdrom.com>
1999-05-12 23:08:02 +00:00
Jordan K. Hubbard
25c4e179f5 Update norwegian time server.
Noted by:	dag
1999-05-12 22:06:00 +00:00
Jordan K. Hubbard
e71d157614 Add some extra checks to make *sure* we got what we were told we got. 1999-05-12 09:22:47 +00:00
Jordan K. Hubbard
b9ad2ee3d4 Completely change the way package_add() does its work. Now we
handle dependencies at a lower level and use package add for this.
Also made index searches stricter.
1999-05-12 09:02:37 +00:00
Jordan K. Hubbard
a6af8d4174 Support divergent docs for different architectures. 1999-05-12 08:19:54 +00:00
Jordan K. Hubbard
04b10daf62 Punt! This file is now architecture specific. 1999-05-12 08:17:56 +00:00
Jordan K. Hubbard
2a43f686f5 A special installation guide for the Alpha. Thanks, Doug! This is good!
Submitted by:	Doug Rabson <dfr@freebsd.org>
1999-05-12 08:17:03 +00:00
Jordan K. Hubbard
26e6116190 Erm, delete the package base hint again. Gotta lay off the crack!
I simply forgot that I'd already proven this to be a "really good idea that
unfortunately didn't work at all" the *last* time I tried it.  Now
I remember.  Hmmm.  I WILL defeat this evil problem.
1999-05-12 07:12:01 +00:00
Jordan K. Hubbard
4d350c33db We don't bundle the XFree86 release notes on the floppies anymore; take it
out of the appropriate menus.
1999-05-12 06:58:18 +00:00
Jordan K. Hubbard
41fe7a1406 Set PKG_ADD_BASE hint in a certain case. 1999-05-12 06:11:32 +00:00
Jordan K. Hubbard
703e69c29c Fix a couple of bogons in the X server/desktop setup menus. 1999-05-12 04:52:41 +00:00
Jordan K. Hubbard
0f7a617de4 Hmm. Could have sworn I committed this before. Mention the jail() stuff
in release notes.  Be kinda neat if the jail stuff refused to allow read/write
access to raw devices too. :)
1999-05-11 10:29:45 +00:00
Jordan K. Hubbard
f574e34636 Make KDE the "default" desktop. 1999-05-11 08:33:45 +00:00
Jordan K. Hubbard
e73c4fe5eb Preserve /root's dotfiles across upgrades too.
PR:		6559
1999-05-11 08:00:06 +00:00
Matt Jacob
07948bbf89 add in mention of 1080/1240 support 1999-05-11 06:14:26 +00:00
David E. O'Brien
b42cb34552 MFS. 1999-05-10 00:54:18 +00:00
David E. O'Brien
9f08adb16f Turn on compat22 dist. 1999-05-09 17:00:04 +00:00
Doug Rabson
890e94c920 Gdb has been updated to version 4.18 and is now part of the standard
release for FreeBSD/alpha.
1999-05-08 19:19:16 +00:00
Jordan K. Hubbard
5abc195371 Don't install compat22 by default.
Add some more safety belts to package foo.
1999-05-07 20:31:36 +00:00
Jordan K. Hubbard
8a8beee081 Erm, correct mighty braino in previous "don't annoy me" change. 1999-05-07 11:45:26 +00:00
Jordan K. Hubbard
ad4d616fa3 Make saving kernel configuration info disable-able (may be useful in certain
situations).
1999-05-07 11:02:58 +00:00
Jordan K. Hubbard
cbe5232fe7 Use a more correct filesystem type name if given a "UFS" mountpoint that's
not really UFS.

PR:	10711
1999-05-07 05:39:50 +00:00
Jordan K. Hubbard
973a1b96b5 Commit a more general version of the last patch; don't do any back-filling
of values more than once.  User might want to override them.
1999-05-07 05:15:17 +00:00
Jordan K. Hubbard
db510551e9 1. Silence warning.
2. Deal with potential whitespace evil early (PR#7455).
1999-05-07 04:36:21 +00:00
Roger Hardiman
49d551674d Added details of PCI network cards which work by emulating the NE2000.
RealTek 8029, NetVin 5000, Winbond W89C940, Surecom NE-34, VIA VT86C926.
(checked with Bill Paul)

Mention the Brooktree Bt878 is supported by the Bt848 driver.
1999-05-06 19:24:45 +00:00
Jordan K. Hubbard
eb6b299247 revert premature DHCP commit 1999-05-06 11:15:33 +00:00
Jordan K. Hubbard
44070deaa0 Argh, those last two commits snuck in with the other one by mistake.
Disable the non-working dhcp client code I just committed by mistake.
1999-05-06 11:05:19 +00:00
Jordan K. Hubbard
734ec189d0 Fix includes; I had a slightly different Makefile than everyone else
which is why I didn't see this. :)

Noted by:	Maxim Sobolev <sobomax@altavista.net>
1999-05-06 11:03:21 +00:00
Jordan K. Hubbard
2d49c1f84a Another round of updates for -current and 3.2 1999-05-05 11:34:03 +00:00
Jordan K. Hubbard
38ed24dd3c Typo fix. 1999-05-05 10:18:55 +00:00
Jordan K. Hubbard
66e576f88d Fix a few bogons and make this safer for humanity. 1999-05-05 10:14:06 +00:00
Andrzej Bialecki
934ebc48ce Deal with MAKEDEV's braindedness.
Submitted by:	Patrick Powell <papowell@astart4.astart.com>
Reviewed by:	abial
1999-05-05 08:37:46 +00:00
Bill Paul
31a08ab08e Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA
adapter (and some workalikes). Also add man pages and a wicontrol
utility to manipulate some of the card parameters.

This driver was written using information gleaned from the Lucent HCF Light
library, though it does not use any of the HCF Light code itself, mainly
because it's contaminated by the GPL (but also because it's pretty gross).
The HCF Light lacks certain featurs from the full (but proprietary) HCF
library, including 802.11 frame encapsulation support, however it has
just enough register information about the Hermes chip to allow someone
with enough spare time and energy to implement a proper driver. (I would
have prefered getting my hands on the Hermes manual, but that's proprietary
too. For those who are wondering, the Linux driver uses the proprietary
HCF library, but it's provided in object code form only.)

Note that I do not have access to a WavePOINT access point, so I have
only been able to test ad-hoc mode. The wicontrol utility can turn on
BSS mode, but I don't know for certain that the NIC will associate with
an access point correctly. Testers are encouraged to send their results
to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
Andrzej Bialecki
a4cc706896 Simple_HTTPd on steroids - major rework of the original program, by
William Lloyd. New features include:

* many additional command line options
* "fetch" mode
* less bugs :-)
* better README.

Submitted by:	William Lloyd <wlloyd@lap.net>
Reviewed by:	abial
1999-05-05 07:22:34 +00:00
Masafumi Max NAKANE
07a7340350 Typo fix and a very minor wording adjustment. 1999-05-05 00:20:15 +00:00
Jordan K. Hubbard
e17b155825 Substantially update this to match reality. Also do a typo/facto pass over
Max's serial console instructions (this is good stuff, thanks Max!).
1999-05-04 23:27:07 +00:00
Masafumi Max NAKANE
5e4b06fbd3 Add a new section ``Tips for Serial Console Users''. (Previous
commit included the entry for this section in the Table of Contents
by mistake.)
Also, some typo fix.
1999-05-04 15:57:09 +00:00
Masafumi Max NAKANE
7245fe241c Style fix: make the indentation consistent. 1999-05-04 15:33:38 +00:00
Masafumi Max NAKANE
96a3add7e9 Install boot.config with `-P' in it in the i386 boot floppy.
Also, let the bigboot floppy to have /boot/loader.rc with
  echo \007\007
  autoboot 10
1999-05-02 17:43:45 +00:00
Jordan K. Hubbard
80a75bddbb Add dhclient to mfsroot floppy - changes to sysinstall to follow. 1999-05-01 11:30:55 +00:00
Jordan K. Hubbard
afdcb1bc13 Shuffle source selection menu items to make it a little easier to use. 1999-05-01 11:27:37 +00:00
Tim Vanderhoek
61f74535f6 Change references from "passwordperiod" to "passwordtime", since
"passwordtime" is what passwd(1) has actually been using.  I suspect
passwordperiod was the original intent.  I can't figure-out which,
if either, BSDi uses.  If anyone knows...
1999-04-30 18:19:46 +00:00
John Polstra
d74efe9105 pppd/Makefile:
Enable MS-CHAP support.

release/Makefile:
  Build a separate NOCRYPT version of pppd, to keep This Great
  Nation's top-secret cryptographic tools out of the filthy hands
  of those evil furriners.
1999-04-29 17:56:28 +00:00
Jordan K. Hubbard
78e2e8ea35 Deal with new loader syntax in determining how/when to load a userconfig
script.

Submitted by:		"Daniel C. Sobral" <dcs@newsguy.com>
Avoided by:		jkh
Demanded by:		The Users
1999-04-28 10:51:01 +00:00
Jordan K. Hubbard
da95ac4842 Write config files to /usr/share/skel as well as root's profile. 1999-04-28 07:20:11 +00:00
Jordan K. Hubbard
a5a953fc61 Do the right thing for windowmaker installation if it's picked. Add some
seat belts for failed desktop installations.
1999-04-28 06:39:25 +00:00
Jordan K. Hubbard
4d24621b10 o Make package matching for specific package loading use the Latest/
feature of packages now so that no version info is embedded.

o Add a default X desktop menu offering afterstep, enlightenment, KDE, GNOME
  and Windowmaker desktops instead of the boring twm(1) based one if the
  user so chooses.  This will require a little testing.
1999-04-27 14:33:29 +00:00
Masafumi Max NAKANE
f7a6848306 echo ^G^G -> echo \007\007 in loader.rc in kern.flp. 1999-04-27 05:09:43 +00:00
Masafumi Max NAKANE
78e52c11c2 Change the loader.rc in the boot floppy to:
1. Enable use of serial console for installation by using autoboot
  instead of boot.

2. Beep when the mfs root floppy needs to be placed in the fdd.

3. Beep again when mfs root image is loaded and the loader waits
  for ten seconds before it starts booting for any input.  (Serial
  console users can say " boot -h" here.)
1999-04-25 16:42:46 +00:00
Jordan K. Hubbard
c8f07a79f8 Remove the registration stuff; we're redoing this and the emailed
registrations have a high failure rate for various reasons.
1999-04-24 01:53:55 +00:00
David E. O'Brien
6df198f879 Add Id. 1999-04-21 07:42:02 +00:00
David E. O'Brien
a0154df93c Add compat3x to the mix.
Reviewed by:	jkh
1999-04-21 07:22:37 +00:00
David E. O'Brien
0e9364c961 Add compat22 and compat3x. 1999-04-20 11:48:01 +00:00
David E. O'Brien
d790bc7096 Add script to install the compat3x distribution. 1999-04-20 11:42:51 +00:00
David E. O'Brien
ac34a7a431 Add the compat3x dist. 1999-04-20 11:41:59 +00:00
Jordan K. Hubbard
7f782a1b9e Fix a misspelling. 1999-04-13 05:14:44 +00:00
Nick Hibma
e1bf72b241 Update the list of supported USB devices with the list that is stored in
usbdevs.h and usbdevs_data.h. Any additional entries are welcome.
1999-04-11 00:18:07 +00:00
Nick Hibma
377912b604 Updated the list of devices supported by the USB susystem.
Thanks Mike for the hint.
1999-04-10 16:54:12 +00:00
Hellmuth Michaelis
bb583c03fc Add ISDN cards supported by isdn4bsd to list of supported hardware,
remove nic driver for Dr. Neuhaus Niccy 300x ISDN cards from this list
1999-04-10 14:34:29 +00:00
Mike Smith
76dcbbc686 Add a skinny USB section. Note that the Zip mention preempts the actual
comitting of the umass driver by a little.
1999-04-08 21:42:11 +00:00
Jordan K. Hubbard
59332d73a0 State the need to read errata more, um, strongly. 1999-04-08 06:00:01 +00:00
Jordan K. Hubbard
9d49bf557a Don't allow upgrade to touch /usr/src; only evil can result from
that kind of overlay smashing.
1999-04-07 03:06:44 +00:00
Bill Paul
d02c233129 Add driver support for gigabit ethernet adapters based on the Alteon
Networks Tigon 1 and Tigon 2 chipsets. There are a _lot_ of OEM'ed
gigabit ethernet adapters out there which use the Alteon chipset so
this driver covers a fair amount of hardware. I know that it works with
the Alteon AceNIC, 3Com 3c985 and Netgear GA620, however it should also
work with the DEC/Compaq EtherWORKS 1000, Silicon Graphics Gigabit
ethernet board, NEC Gigabit Ethernet board and maybe even the IBM and
and Sun boards. The Netgear board is the cheapest (~$350US) but still
yields fairly good performance.

Support is provided for jumbo frames with all adapters (just set the
MTU to something larger than 1500 bytes), as well as hardware multicast
filtering and vlan tagging (in conjunction with the vlan support in
-current, which I should merge into -stable soon). There are some hooks
for checksum offload support, but they're turned off for now since
FreeBSD doesn't have an officially sanctioned way to support checksum
offloading (yet).

I have not added the 'device ti0' entry to GENERIC since the driver
with all the firmware compiled in is quite large, and it doesn't really
fit into the category of generic hardware.
1999-04-06 17:08:31 +00:00
Jordan K. Hubbard
3e6a56bb87 Add an option for resetting and rescanning the probed device list, perhaps
to now detect that CD you just remembered to put in the drive or that
pccard NIC that you've inserted (anybody can put pccardd in an mfsroot image
now you know.. :)

Requested by:	Annelise Anderson <andrsn@andrsn.Stanford.EDU>
1999-04-06 08:25:53 +00:00
David E. O'Brien
488a805f88 4.0 will offer EGCS over GCC to the world. 1999-04-04 21:50:07 +00:00
SADA Kenji
8e8d540f0d Make release would fail for lack of /etc/resolv.conf or $DISTFILES/
PR:	misc/9913
Submitted by:	YAMAMOTO Shigeru <shigeru@bremen.or.jp>
1999-03-31 11:18:52 +00:00
Jordan K. Hubbard
696ff94de7 Bump default root fs sizes, for both i386 and alpha architectures. 1999-03-30 04:09:21 +00:00
Nik Clayton
fa93788041 If ALLLANG is not set then ensure that DOC_LANG=en is, so that
the English Handbook is built (it's not built by default any more).
1999-03-27 16:02:04 +00:00
Jordan K. Hubbard
0f74091f66 1. Update TAPE to point to new CAM-style device name.
2. Don't prompt for removal twice on fixit floppy.

Submitted by:		jack <jack@germanium.xtalwind.net>
1999-03-27 01:48:44 +00:00
Jordan K. Hubbard
1895abde6f Offer an X Kern Developer collection, by user request (it's also more
orthogonal to the other entries).

Clean up X selection code a bit.

Choose proper architecture subdirectories on mirror sites now that we've
gone fully to the new multi-arch directory scheme.
1999-03-19 10:54:38 +00:00
Jordan K. Hubbard
3e4cc6bfc4 Add /etc/rc.firewall to list of "save after upgrade" targets. 1999-03-19 08:22:31 +00:00
Jordan K. Hubbard
b05b1d8172 This apparently works now, excise it from TROUBLE.TXT 1999-03-18 06:43:01 +00:00
David E. O'Brien
51bb9af7e5 Add import of ISC's DHCP client & the upgrade of Groff. 1999-03-15 09:41:22 +00:00
Mark Murray
5beaada399 Bitrot. Remove objlink as it is not pleasant to be downwind.
PR:		8071
Reviewed by:	Sheldon Hearn <sheldonh@iafrica.com>
1999-03-14 20:41:14 +00:00
Jordan K. Hubbard
03fd03689e Update to post-branch state (yeesh!) 1999-03-12 22:45:42 +00:00
Brian Somers
c47524e783 Change permissions on /etc/ppp/ppp.conf to 0640. 1999-03-11 18:22:23 +00:00
Jordan K. Hubbard
960d04f6fc Make proper symlinks for fixit mode and ELF binaries.
Noticed by:	jdp
1999-03-11 09:38:06 +00:00
Jordan K. Hubbard
063d580388 Also look under FREEBSD/.. for distribution files; I meant to do this
for the DOS distro.
1999-03-10 21:59:01 +00:00
Jordan K. Hubbard
23aac4b3bb We don't use this anymore - nuke it. 1999-03-10 03:50:38 +00:00
Jordan K. Hubbard
c978c8324f Merge some doc updates which got only into the 3.0 branch during the last
release cycle.
1999-03-10 02:50:32 +00:00
Andrzej Bialecki
9509885927 Take boot1/boot2 from their new place, i.e. /boot/, not from
(currently nonexistent) /usr/mdec/.

Submitted by:	luigi
1999-03-09 21:15:08 +00:00
Jordan K. Hubbard
fca8402bb3 o Use larger minimum root size on alpha.
o Use proper architecture subdir when fetching bits from snapshot servers.

Submitted by:	Doug Rabson <dfr@nlsystems.com>
1999-03-09 12:36:28 +00:00
Jordan K. Hubbard
862ff8fb27 Add Specialix SI/XIO/SX ISA, EISA and PCI serial expansion cards/modules
Submitted by:	Nick Sayer <nsayer@quack.kfu.com>
PR:		10456
1999-03-08 23:41:12 +00:00
Jordan K. Hubbard
b48125eaa8 Update reference to setup.exe (which is now dead). 1999-02-23 04:19:30 +00:00
Jordan K. Hubbard
36f6982577 Document a changed variable name. 1999-02-18 23:59:58 +00:00
Jordan K. Hubbard
d207e2138a Be more forgiving of PnP config saving failures. 1999-02-16 01:58:04 +00:00
Jordan K. Hubbard
46da642360 Update to deal with pnp userconfig data.
Submitted by:	abial
1999-02-15 07:07:37 +00:00
Jordan K. Hubbard
8ac5a460c0 Add entry for gnome category. 1999-02-15 04:57:07 +00:00
Jordan K. Hubbard
02f3e729fe Write out new boot blocks on upgrade. 1999-02-15 02:22:47 +00:00
Jordan K. Hubbard
065f34b7e2 Unbreak the fixit floppy.
Clean up some of the media handling to use common routines.
1999-02-15 00:49:33 +00:00
Andrzej Bialecki
5a1e113f67 Copy the 'reboot' script only for "dial" floppy. 1999-02-15 00:27:00 +00:00
Jordan K. Hubbard
21300d38a6 Put a convenient marker in rc.conf to show updates.
Better screen saver descriptions.
1999-02-14 21:35:02 +00:00
Jordan K. Hubbard
046bfca773 Fix incorrect initial state for two variables. 1999-02-14 21:26:29 +00:00
Jordan K. Hubbard
829024ef22 MF3: SYSVMSG addition, fluff with release notes. 1999-02-14 20:14:58 +00:00
Jordan K. Hubbard
1853f513c2 Include all the recent screen savers. 1999-02-14 20:14:07 +00:00
Jordan K. Hubbard
246a56f16e Update to match ports reality. 1999-02-14 18:53:17 +00:00
Jordan K. Hubbard
340f94beeb 4.0-current! 1999-02-14 18:48:44 +00:00
Dag-Erling Smørgrav
ad5ebf3fba Ignore errors from chflags. This makes it possible to make installworld
with DESTDIR set to an NFS-mounted file system.
1999-02-14 13:56:15 +00:00
Jordan K. Hubbard
0616103816 rc.conf vars no longer "dirty" by default. 1999-02-14 07:35:27 +00:00
Jordan K. Hubbard
37e9b7b068 Preserve existing rc.conf contents. 1999-02-14 05:52:57 +00:00
Jordan K. Hubbard
cccdcabe4d Update to current state of /etc 1999-02-13 05:18:06 +00:00
Andrzej Bialecki
f8ee1a074a Merge from RELENG_3. 1999-02-12 20:36:13 +00:00
Jordan K. Hubbard
ef56f6db5d Add spanish mirrors to FTP menu. 1999-02-11 14:42:39 +00:00
Jordan K. Hubbard
edc2bcee4d List diamond fireport cards under Symbios section.
Submitted by:		Stephen McKay <syssgm@detir.qld.gov.au>
1999-02-11 14:00:14 +00:00
Jordan K. Hubbard
fb71f0f661 Install the correct rc.conf file. 1999-02-10 09:15:27 +00:00
Dag-Erling Smørgrav
8a8c13bd0d Use ppbus instead of the lpt driver. 1999-02-10 02:26:04 +00:00
Mike Smith
c8fe5d2a22 The loader doesn't use '@' to suppress command lines anymore. 1999-02-10 01:57:38 +00:00
Jordan K. Hubbard
58dd43480c Write changes out to /etc/rc.conf again; rc.conf.site is dead! 1999-02-09 22:18:10 +00:00
Jordan K. Hubbard
af2a7159f7 If user selects X, also auto-select compat22 (for now). 1999-02-07 12:57:04 +00:00
Jordan K. Hubbard
219771720a SMAILCF distro no longer exists. 1999-02-07 12:43:14 +00:00
Jordan K. Hubbard
9cb65f67ce Reshuffle a number of menus to be more navigable. Delete extra
Root Password entry (PR#9291 - Jack O'Neill).
1999-02-06 16:35:26 +00:00
Jordan K. Hubbard
61bbe58e17 Ack! Correct a typo which crept into here and reshuffle the index back
into alphabetical order.
1999-02-06 08:45:20 +00:00
Jordan K. Hubbard
1dbeea2692 BASE=4.0 1999-02-06 06:51:30 +00:00
Jordan K. Hubbard
b1e7bed4c0 Add one more "escape" for marking internal variables. 1999-02-05 22:25:13 +00:00
Jordan K. Hubbard
63cad5499d Totally change the way variables are accounted for in sysinstall.
Now we know which variables are internal and which need to be
backed to /etc/rc.conf.site.  rc.conf is not touched now.

Also kget kernel change information back properly and set up a loader.rc
file to use it.
1999-02-05 22:15:52 +00:00
Jordan K. Hubbard
d7f9b906ed Bump MFS up to 2.88MB. Now there's room for quite a bit more stuff
(like a dhcp client?).
1999-02-05 10:09:11 +00:00
Jordan K. Hubbard
0ea78a4808 Update snapshot build machine names. 1999-02-05 09:54:59 +00:00
Jordan K. Hubbard
73a5edc181 Indicate that we're using XFree86 3.3.3.1 1999-02-05 09:28:16 +00:00
Jordan K. Hubbard
b236caa286 Add a lot of additional keymaps to the appropriate menu.
Submitted by:	Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1999-02-04 13:47:54 +00:00
Jordan K. Hubbard
bfaa302e64 Add compat22 distribution in anticipation of its appearance. 1999-02-04 03:30:34 +00:00
Joerg Wunsch
f1689b7f23 Several recent additions. Folks, please update this file if you add some
new feature to the system!

. SVR4 emulation
. NTFS
. upgrade of f77 via f2c
1999-02-03 17:27:12 +00:00
Jordan K. Hubbard
5d5c8f3b7b List palm pilot category. 1999-02-02 16:57:55 +00:00
Jordan K. Hubbard
86784dbcd2 Show dependencies in package menu.
PR:		7454
Submitted by:	Stefan Eggers <seggers@semyam.dinoco.de>
1999-02-02 15:57:14 +00:00
Jordan K. Hubbard
f248b38722 Whoops, don't break the alpha release build in copying the boot
images - be smarter about it.
1999-02-01 18:08:07 +00:00
Jordan K. Hubbard
750eba274b Man, was I ever smoking crack when I wrote this. Don't free()
values I'm going to use again. :-}
1999-02-01 16:35:40 +00:00
Jordan K. Hubbard
c49127f127 Adjust notes to describe new boot floppy scheme. 1999-01-31 12:55:08 +00:00
Jordan K. Hubbard
50156effd9 Don't strip out stuff from boot.flp now that it's twice the size. 1999-01-31 12:41:12 +00:00
Jordan K. Hubbard
b5d01310b1 Well, we've blown out boot.flp again. Time to go to 2.88MB format
for those folks with large floppy drives, LS-120s or CDROMs.  Everyone
else will now have to use kern.flp & mfsroot.flp to install from.
We've held this off as long as possible and there's just no more fat
to trim. :(  I'll look at increasing the mfsroot size too later, depending
on how well it compresses.
1999-01-31 12:38:19 +00:00
Jordan K. Hubbard
6bda53ee82 Be more selective about installing things from /boot; no telling
what might wind up there in the future to overflow us again.
1999-01-31 03:53:55 +00:00
Jordan K. Hubbard
6f6f564445 1. Install /boot/loader correctly on boot.flp
2. Back up old rc.conf.site if it exists.
1999-01-30 22:15:36 +00:00
Bill Paul
4d7a9b1889 Add two additional cards to the supported adapters list: the Racore 8165
and Racore 8148 adapters are now supported by the ThunderLAN driver.
The 8165 is just a plain vanilla 10/100 card; the 8148 is a 'multi-
personality' adapter which can support 10baseT, 100baseTX and 100baseFX
if you include the proper modules.

Also update the tl man page to mention the Racore cards.
1999-01-29 16:25:20 +00:00
Jordan K. Hubbard
50895b8915 More support for Alpha installs.
Submitted by:	dfr
1999-01-29 11:39:04 +00:00
Jordan K. Hubbard
3a2d4948bf Nuke pnp0 from boot.flp 1999-01-28 06:27:41 +00:00
Jordan K. Hubbard
24c1db52ef Write changes out to /etc/rc.conf.site now rather than mucking with
rc.conf.  There were many different ways I could have done this, some of
them "cleaner", but this represented the lowest impact.
1999-01-27 02:32:47 +00:00
Jordan K. Hubbard
7953e823ae OK, now the boot floppies work again. Also collapse some common
build cases.
1999-01-26 15:22:29 +00:00
Jordan K. Hubbard
ccfcf93e53 1. Adjust fs sizes to get floppies back under control.
2. Viciously slash all CD support out of boot.flp.  It's basically just
   a net boot floppy now.
1999-01-26 15:14:11 +00:00
Jordan K. Hubbard
b75895b4d0 NO_LKM is deprecated 1999-01-26 12:59:09 +00:00
Jordan K. Hubbard
a566c3ca7e s/wcd/acd/
Noted by:	des
1999-01-26 10:18:52 +00:00
Jordan K. Hubbard
5bd0196abc Play with MFS size a little. 1999-01-25 04:57:07 +00:00
Jordan K. Hubbard
5d2b50da3c swap support is actually pretty important; put it back
CVS: ----------------------------------------------------------------------
1999-01-22 19:11:37 +00:00
Garrett Wollman
129a627970 Update for 4.0 by adding the first two major changes and deleting a lot
of irrelevant (2.x/3.x) content.
1999-01-21 23:26:34 +00:00
Jordan K. Hubbard
70af253a69 Set JADETEX=no on ports build line.
Prompted by:	nik
1999-01-20 23:24:06 +00:00
Jordan K. Hubbard
c80ac74f4b Replace old SAVE_USERCONFIG code with a customized version of Andrzej's
kget code.  Also collapse a redundant case in cdrom code.
1999-01-20 12:31:43 +00:00
Jordan K. Hubbard
bd1ac8296b Remove obsolete dset code. It's an ELF/3-stage boot world now and there
are cleaner ways of doing this that don't involve stomping on kernel
binaries directly.
1999-01-20 11:56:42 +00:00
Andrzej Bialecki
cfc0e28a51 Add missing "quit". 1999-01-19 23:15:56 +00:00
Andrzej Bialecki
9dacf92623 Don't start (now) noneexistent snmpd. 1999-01-19 23:15:41 +00:00
Andrzej Bialecki
05693a30ce Remove generated copy of the file. 1999-01-19 23:14:30 +00:00
Andrzej Bialecki
d3ce4405b6 Add NOPAM hook. 1999-01-19 23:12:50 +00:00
Andrzej Bialecki
281c9803a2 Remove PROCFS - we don't use it. 1999-01-19 23:12:27 +00:00
Andrzej Bialecki
b37d50de2e Remove snmp for now - it has to either shrink, or we have to invent
something else...
1999-01-19 23:11:50 +00:00
Andrzej Bialecki
bc8fb49115 Add NOPAM hook to be able to use login(1) here... 1999-01-19 23:10:34 +00:00
Andrzej Bialecki
9f63a91c4c Sync more with reality... 1999-01-19 23:09:46 +00:00
Andrzej Bialecki
3f81b6e1f1 Emulate getpass behaviour when asking for user's password.
Add ability to use PAP/CHAP authentication in auto-generated ppp.conf.

Let users edit ppp arguments before the first run.
1999-01-19 23:09:15 +00:00
Andrzej Bialecki
0b8ce10c41 Add stty to emulate getpass in dialup script. 1999-01-19 23:07:17 +00:00
Andrzej Bialecki
0b0da843a9 Next round of fixes before 3.1-RELEASE. 1999-01-19 23:02:05 +00:00
Andrzej Bialecki
d27f3d61be Bump version number to 0.43 1999-01-19 23:01:25 +00:00
Kenneth D. Merry
8db3059d03 Significant modifications to the SCSI controller support sections in both
files.  They are now both basically the same.  I also modified the driver
list in HARDWARE.TXT:  add the adw and isp drivers, and indicate that the
uha driver isn't yet supported under CAM.

This includes specific mention of all supported NCR and BusLogic models,
additional qualification of the supported DPT and QLogic models, and some
additions to the list of supported onboard Adaptec chips.

The hope is, of course, that this will lead to fewer questions like "is the
froboz SCSI controller supported?"

I think the formatting of the new entries looks okay, but someone with a
better eye for things like that might want to look at this.
1999-01-19 22:24:06 +00:00
Kenneth D. Merry
95e6a1e05e Qualify Adaptec 2920 support -- only the 2920C is supported. The 2920 is a
rebadged Future Domain card that is not supported.

Also, only the DPT SmartRAID III and IV are supported.  (The SmartRAID V
isn't yet supported by the DPT driver.)
1999-01-19 05:59:43 +00:00
Bill Paul
395a1eda4d Update to include new drivers, mention newly supported fast ethernet
adapters.
1999-01-18 19:25:30 +00:00
Bill Paul
e2be51399d Mention that the CNet Pro110B is supported (ax driver). 1999-01-18 17:26:01 +00:00
Andrzej Bialecki
d54d292d52 Fix copy & paste error.
Submitted by:	Reinier Bezuidenhout <rbezuide@oskar.nanoteq.co.za>
1999-01-18 10:17:38 +00:00
Jordan K. Hubbard
3f58aadfc4 More floppy size adjustments - I thought I'd already committed these, whoops! 1999-01-16 22:42:25 +00:00
Daniel O'Callaghan
7621c7c32a Fix Makefile so it works.
Change date format to yyyy/mm/dd hh:mm:ss
Submitted by:	Peter Jeremy <peter.jeremy@alcatel.com.au>
1999-01-16 03:50:10 +00:00
Andrzej Bialecki
6b75c010a0 Use the new kget syntax. 1999-01-14 23:23:19 +00:00
Andrzej Bialecki
e8929da0c5 Add natd entry. 1999-01-14 23:23:02 +00:00
Andrzej Bialecki
f6e84454ab Change to new syscons devices. 1999-01-14 23:22:51 +00:00
Andrzej Bialecki
6cca71034d Use the new syntax for kget. 1999-01-14 23:21:04 +00:00
Andrzej Bialecki
1c8e558414 Fix to match new syntax for kget. 1999-01-14 23:19:47 +00:00
Andrzej Bialecki
d0efc0c9cd Change to the new syscons devices. 1999-01-14 23:15:39 +00:00
Andrzej Bialecki
b9068e0a34 Make transition to ELF kernel. Fix the userconfig_script handling. 1999-01-14 23:14:46 +00:00
Andrzej Bialecki
f083684bae (Fix null log in previous commit).
Change /boot/boot.conf to /boot/loader.rc - this name reflects what it
really is.

Agreed upon by:	jkh, msmith and many others
1999-01-14 15:36:53 +00:00
Andrzej Bialecki
dd9131482c *** empty log message *** 1999-01-13 21:56:58 +00:00
Joerg Wunsch
d3c8d7fa01 Mention isdn4bsd support.
Forgotten by:	phk :)
1999-01-13 17:36:31 +00:00
Mike Smith
901b072607 Replace /mnt with ${MNT}
PR:		misc/7965
Submitted by:	Junji SAKAI sakai@jp.freebsd.org
1999-01-12 22:12:12 +00:00
Joerg Wunsch
5966cedcb9 Allow chflags(1) to fail inside the chroot environment for /R. This
can happen iff ${CHROOTDIR} is NFS-mounted.
1999-01-12 15:37:19 +00:00
Satoshi Asami
0e510aed5b Oops, I missed a few more /etc/nologin references yesterday. It appears
my check of the tree was incomplete.  Sorry guys.

Reported by:	Ben Smithurst <ben@scientia.demon.co.uk>
1999-01-12 14:09:23 +00:00
Satoshi Asami
b563f7147c Merge recent changes from doc/handbook/porting.sgml and www/en/ports/categories. 1999-01-11 12:45:18 +00:00
Jordan K. Hubbard
7385073d2a Try some new floppy sizes. 1999-01-11 00:54:00 +00:00
Robert Nordier
c9e6c111cd No longer install obsolete boot.help file. 1999-01-10 21:31:37 +00:00
Jordan K. Hubbard
79dc98bf2a whoops, missed one. 1999-01-10 02:46:27 +00:00
Jordan K. Hubbard
15c2c2f3da Nuke this - it's antiquated and unmaintained. 1999-01-09 23:14:34 +00:00
Gary Palmer
c24470b1fd Really delete the netboot image off the alpha floppy. I think Jordan
got his paths confused :)
1999-01-09 19:14:22 +00:00
Bill Paul
31188d61c1 Add driver support (and man page) for PCI fast ethernet cards based
on the ASIX AX88140A chip. Update /sys/conf/files, RELNOTES.TXT,
/sys/i388/i386/userconfig.c, sysinstall/devices.c, GENERIC and LINT
accordingly.

For now, the only board that I know of that uses this chip is the
Alfa Inc. GFC2204. (Its predecessor, the GFC2202, was a DEC tulip card.)
Thanks again to Ulf for obtaining the board for me. If anyone runs
across another, please feel free to update the man page and/or the
release notes. (The same applies for the other drivers.)

FreeBSD should now have support for all of the DEC tulip workalike
chipsets currently on the market (Macronix, Lite-On, Winbond, ASIX).
And unless I'm mistaken, it should also have support for all PCI fast
ethernet chipsets in general (except maybe the SMC FEAST chip, which
nobody seems to ever use, including SMC). Now if only we could convince
3Com, Intel or whoever to cough up some documentation for gigabit
ethernet hardware.

Also updated RELNOTEX.TXT to mention that the SVEC PN102TX is supported
by the Macronix driver (assuming you actually have an SVEC PN102TX with
a Macronix chip on it; I tried to order a PN102TX once and got a box
labeled 'Hawking Technology PN102TX' that had a VIA Rhine board inside
it).
1999-01-09 18:12:08 +00:00
Jordan K. Hubbard
7b2b51793d Adios, kzip - you don't work on ELF kernels. 1999-01-09 00:32:00 +00:00
Andrzej Bialecki
b51e08ff33 Replace kget with version which obtains its info from newly added
sysctl machdep.uc_devlist, instead of /dev/kmem.
1999-01-08 21:09:42 +00:00
Jordan K. Hubbard
bed7bf35a2 close doc race. 1999-01-08 09:13:00 +00:00
Jordan K. Hubbard
71696ba327 Copy only the boot1 and boot2 (if exists) files into mfs/boot since
we don't need the others there.
1999-01-08 05:33:11 +00:00
Jordan K. Hubbard
9694e175f1 DTRT with gzip'd alpha kernels.
Submitted by:	dfr
1999-01-08 00:33:21 +00:00
Jordan K. Hubbard
af61828f44 Adapt sysinstall more fully to the alpha (deal with proper boot signatures,
don't present label editor, etc).

Submitted by:	dfr
1999-01-08 00:14:22 +00:00
Jordan K. Hubbard
162cd2a6ab copy resolv.conf to chroot area. 1999-01-06 19:18:45 +00:00
Peter Wemm
1825309d72 Remove some remaining references to LKM's. Snaps were trying to unpack
slkm* etc, among other things.
1999-01-06 13:55:14 +00:00
Jordan K. Hubbard
431463e043 Whoops, missed an instance of the old image naming. 1999-01-05 17:03:49 +00:00
Jordan K. Hubbard
ed051f627e Remove legacy boot.config file. 1999-01-05 03:53:14 +00:00
Jordan K. Hubbard
92e86f9920 Hammer on the boot floppy generation bits some more. This is looking
a little better.
1999-01-05 03:44:08 +00:00
Jordan K. Hubbard
891258b761 Fix bogon in docfile placement. 1999-01-05 02:35:38 +00:00
Jordan K. Hubbard
3e5ef0fd59 Conditionalize make world in release. 1999-01-05 02:09:29 +00:00
Jordan K. Hubbard
643f7da028 Do some serious beating on the floppy generation code to try and
simplify it, name things more descriptively and get the kernel back
on boot.flp where it should be.
1999-01-05 01:58:44 +00:00
Jordan K. Hubbard
d26a815b77 Clean up some more residual /usr/mdec references. I left all the
extra rbootd/boot rom cruft pointing at /usr/mdec since it either
doesn't exist or doesn't work anyway, so who cares? :)
1999-01-03 02:18:58 +00:00
Jordan K. Hubbard
cb48829cff Update this to deal with new boot block placement.
Reported by:	"John W. DeBoskey" <jwd@unx.sas.com>
1999-01-02 23:15:20 +00:00
Jordan K. Hubbard
8965607263 Read in /boot contents at runtime. Assumes /boot/boot1 on alpha (which
may not yet be caught up).
1999-01-02 07:23:37 +00:00
Jordan K. Hubbard
0adf658a50 gzip the kern.flp kernel, don't kzip it. 1998-12-29 07:27:55 +00:00
Jordan K. Hubbard
257bf67682 Remove previous cast again - it triggers a compiler bug on the Alpha
which prevents sysinstall from building.  We'll just have to live with
the warning on the x86. :(
1998-12-25 21:57:06 +00:00
Bill Paul
6a5359cac2 Correct the name of the SMC 1211-TX: it's called the EZ Card 10/100 PCI,
not EtherEZ.
1998-12-24 18:52:47 +00:00
Jordan K. Hubbard
082a22b108 Turn off NODOC again; apparently this problem was fixed. 1998-12-24 08:55:05 +00:00
Jordan K. Hubbard
f5457f7c86 Turn NODOCS on for now. 1998-12-24 04:28:25 +00:00
Andrzej Bialecki
cf99ccfbc0 Fix typo.
Submitted by:	Ilya V. Komarov <mur@lynx.ru>
1998-12-22 21:40:56 +00:00
Jordan K. Hubbard
8d8f2bab5a Collapse the "get" code substantially by combining common functions.
Also make mountpoint for each media type easier to change.
Also reshuffled some menus for easier usage.
1998-12-22 12:31:26 +00:00
Joerg Wunsch
be4a254c7d Include information about rdp(4). 1998-12-21 18:07:16 +00:00
Jordan K. Hubbard
19676bfc7d Just fetch distfiles from a single location. The change to textproc/docproj
broke my fetch heuristic anyway.
1998-12-21 17:34:33 +00:00