Commit Graph

137 Commits

Author SHA1 Message Date
Robert Watson
e1e8f51b85 Universally adopt most conventional spelling of acquire. 2007-05-27 20:50:23 +00:00
Stephen McKay
5bdc94fa35 Make a missing or empty VPD non-fatal, as it was prior to rev 1.131.
With this change, my D-Link DGE-530T rev A1 is operational again.
2007-05-10 13:10:34 +00:00
Pyun YongHyeon
75a1d5a086 Use our own timer for watchdog instead of if_watchdog/if_timer
interface.
2007-04-02 04:43:41 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Marius Strobl
c2175ff5ca Change the remainder of the drivers for DMA'ing devices enabled in the
sparc64 GENERIC and the sound device drivers known working on sparc64
to use bus_get_dma_tag() to obtain the parent DMA tag so we can get rid
of the sparc64_root_dma_tag kludge eventually. Except for ath(4), sk(4),
stge(4) and ti(4) these changes are runtime tested (unless I booted up
the wrong kernels again...).
2007-01-21 19:32:51 +00:00
Pyun YongHyeon
e16d3854ae Remove incomplete Yukon II support code which was added in if_sk.c, rev 1.123.
Yukon II users should use msk(4).
2006-12-14 04:10:26 +00:00
John-Mark Gurney
667dc26e71 provide routines to access VPD data at the PCI layer...
remove sk's own implementation, and use the new calls to get the data...

Reviewed by:	-arch
2006-10-09 16:15:56 +00:00
Pyun YongHyeon
ff9c95a4d0 Fix invalid reference of mbuf chains.
Use proper pointer dereference to inform modified mbuf chains to
caller.

In collaboration with:	glebius
2006-08-12 01:24:37 +00:00
Pyun YongHyeon
3b234fcbab Fix incorrect busy check for PHY write operation.
While I'm here remove unnecessary return statement.
2006-08-02 02:36:59 +00:00
Pyun YongHyeon
7b4e72633e Add device ID for second generation D-Link DGE-530T.
PR:	kern/99903
2006-07-27 05:06:43 +00:00
Pyun YongHyeon
4425fc9453 Convert sk(4) to use the new bus_alloc_resources() API and
bus_{read,write}_* macros.

Submitted by:	Antoine Brodin <antoine.brodin AT laposte DOT net>
Reviewed by:	imp (initial version)
2006-07-19 04:12:59 +00:00
Pyun YongHyeon
a1e4f25700 Fix typo in comment.
Submitted by:	brad AT OpenBSD DOT org
2006-07-05 04:56:50 +00:00
Pyun YongHyeon
ad25ff2b43 Fix watchdog timeout errors seen on a few systems.
SK-NET GENESIS document says reading SK_ISSR should stop generating
further interrupts(Since we drop a driver lock before invoking
ifp->if_input handler we should disable interrupts in ISR in order
to protect integrity of softc from subsequent interrupts). But it
seems that there is possibility of loosing interrupts between
reading SK_ISSR and determining which interrupts are reported.
To cope with the situation we continuously read SK_ISSR register
until there are no interrupts. However, it seems that the above
work around doesn't fix all cases. To protect watchdog handler
from triggering false alarm add a work around code which try to
reclaim pending Tx descriptors before resetting hardware. This
should fix occasional watchdog timeout errors seen on this driver.

Reported by:	Frank Behrens <frank AT pinky dot sax dot de >
Tested by:	Frank Behrens <frank AT pinky dot sax dot de >
2006-06-07 09:05:20 +00:00
Pyun YongHyeon
fde45b415e Re-wrok PHY setup, media handling and dual-port detection.
With this change SysKonnect SK-9521 v2.0 and SK-9821 v2.0
adapter now works.

Obtained from:	OpenBSD
Reported by:	Ganbold ganbold ! micom ( mng $ net
Tested by:	Ganbold ganbold ! micom ( mng $ net
2006-05-15 04:50:33 +00:00
Maxim Sobolev
6cd0bab5d5 Don't attach to Marvell 88E805X (Yukon-II) by default, the driver is not
functional yet.

Requested by:	bz
2006-05-01 05:16:36 +00:00
Maxim Sobolev
8dcfaef0a0 Add some incomplete support for Marvell Yukon EC controllers based on
OpenBSD changes. With these changes, PHY part of the driver becomes
functional (it senses media changes and negotiates speed just fine),
previously it just hang with no PHY message, but no data goes through
interface (error message is "can not stop transfer of Tx/Rx descriptor).

Hopefully somebody with more clue/free time will be able to pick up
after me.
2006-04-28 03:17:37 +00:00
Pyun YongHyeon
919133a8ef Bring busdmafied sk(4) to all architectures.
- MPSAFE. No more recursive lock required.
- bus_dma(9) conversion. I think it should work on all architectures.
- optimized Rx handler for each normal and jumbo frames. Previously
  sk(4) used jumbo frame management code to handle normal sized
  frames. As the handler needs an additional lock to protect jumbo
  frame management structure from races, it used two lock operations
  for each received packet. Now sk(4) uses single lock operation for
  normal frame.(Jumbo frame still needs two lock operations as before.)
  The hardware supports DMA scatter operations for Rx descriptors such
  that it's possible to take advantagee of m_cljget(9) for jumbo frames.
  However, due to a unknown reasons it resulted in poor performance on
  sparc64. So I dropped m_cljget(9) approach. This should be revisited
  since it would reduce one lock operation for jumbo frame handling.
- Tx TCP/Rx IP checksum offload support. According to the data sheet
  of SK-NET GENESIS the hardware supports Rx IP/TCP/UDP offload.
  But I couldn't make it work on my Yukon hardware. So Rx TCP/UDP was
  disabled at the moment. It seems that newer Yukon chips can support
  Tx UDP checksum offload too. But I need more documentation first.
- Added more wait time in reading VPD data. It seems that ASUS LOM
  takes a very long time to respond VPD read signal.
- Added an additional lock for MII register access callbacks.
- Added more strict received packet validation routine. Previously it
  passed corrupted packets to upper layers under certain conditions.
- A new function sk_yukon_tick() to handle auto-negotiation properly.
- Interrupt handler now checks shared interrupt source and protects
  the interrupt handler from NULL pointer dereference which was caused
  by odd status word value. The status word can returns 0xffffffff if
  cable is unplugged while Rx/Tx/auto-negotiation is in progress.
- suspend/resume support(not tested).
- Added Rx/Tx FIFO flush routine for Yukon
- Activate Tx descriptor poll timer in order to protect possible loss
  of SK_TXBMU_TX_START command. Previously the driver continuously issued
  SK_TXBMU_TX_START when it notices pending Tx descriptors not processed
  yet in interrupt handler. That approach would add additional PCI
  write access overhead under high Tx load situations and it might fail
  if the first SK_TXBMU_TX_START was lost and no interrupt is generated
  from the first SK_TXBMU_TX_START command.
- s/printf/if_printf/, s/printf/device_printf/, Axe sk_unit in softc.
- Setting multicast/station address is now safe on strict-alignment
  architectures.
- Fix long standing bug in VLAN header length setup.
- Added/corrected register definitions for Yukon.
  (Register information from Linux skge driver.)
- Added Rx status definition for Marvell Yukon/XaQti XMAC.
  (Rx status register information from Linux skge driver.)
- Update if_oerrors if we encounter watchdog error.
- callout(9) conversion

Special thanks to jkim who let me know RX status differences between
Yukon and XaQti XMAC.
It seems that there is still occasional watchdog timeout error but I
couldn't reproduce it and need more information to analyze it from
users.

Tested by:	bz(amd64), me(i386, sparc64), current ML
		Frank Behrens frank ! pinky ( sax $ de
2006-04-27 05:59:09 +00:00
Pyun YongHyeon
b16affc0ac Correct DRIVER_MODULE declaration.
skc does attach to pci bus instead of sk.

Submitted by:	jmg
2006-04-27 04:39:58 +00:00
Pyun YongHyeon
288292463f The sk(4) driver has moved to /sys/dev/sk 2006-04-27 00:14:02 +00:00
Gleb Smirnoff
23033eebf4 Do not touch ifp->if_baudrate in miibus aware drivers. 2006-02-14 12:44:56 +00:00
Pyun YongHyeon
c57c874824 fix interrupt moderation timer frequencies for Yukon
Obtained from:	OpenBSD
2006-01-17 05:57:44 +00:00
Pyun YongHyeon
878793bc2f remove trailing spaces 2006-01-17 05:41:20 +00:00
Bjoern A. Zeeb
2166476ae9 Remove unused code.
Found with:	Coverity Prevent(tm)
2006-01-15 01:39:01 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Warner Losh
7b279558cc Replace FreeBSD 3.x syntax (controller miibus0) with 4.x syntax
(device miibus) in time for 7.0 :-)
2005-10-22 05:06:55 +00:00
John Baldwin
26390635de Only allow the sk(4) driver to attach to revision 2 of the LinkSys EG1032
cards and teach the re(4) driver to attach to revision 3 cards.

Submitted by:	Fredrik Lindberg fli+freebsd-current at shapeshifter dot se
MFC after:	2 weeks
Reviewed by:	imp, mdodd
2005-10-14 18:51:30 +00:00
Yaroslav Tykhiy
45c11f832a Mark sk(4) as capable of handling extended VLAN frames. NICs
based on XMAC II chip should be ready for this in their initial
mode of operation, and Yukon-based NICs are configured so by
the driver.

PR:		kern/79998
MFC after:	1 month
2005-10-11 22:55:16 +00:00
Ruslan Ermilov
3badacee8c Fix "struct ifnet" leaks when attach() fails in the middle, e.g.
when mii_phy_probe() or bus_setup_intr() fails.  For drivers that
call their detach() in this case, call if_free() there to cover
this case too.
2005-09-16 11:11:51 +00:00
Bjoern A. Zeeb
e3c18d1d11 * Solve "No PHY found" problem for more Yukon Lite variants.
* Catch a bus attach error.
* Improve locking.

MFC after:	6 days
2005-08-13 11:13:12 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Bjoern A. Zeeb
261a19c1ee Deal with failed malloc calls[1].
While there also check for failed device_add_child calls.

Found by:	Coventry Analysis tool[1].
Submitted by:	sam[1]
Approved by:	pjd (mentor)
MFC after:	1 week
2005-04-25 10:18:24 +00:00
Sam Leffler
af5691cdd5 handle malloc failure and sk_vpd_prodname potentially being null for
other reasons

Noticed by:	Coverity Prevent analysis tool
Reviewed by:	bz, jmg
2005-03-26 22:57:28 +00:00
Bjoern A. Zeeb
e7f8ebb45e Do not try to free non allocated memory in error case.
Do our best to plug some memory leaks (VPD data, jumbo memory buffer,...).
Log if we cannot free because memory still in use[1].
Change locking to avoid ''acquiring duplicate lock of same
  type: "network driver"'' and potential deadlock. Also seems to fix LOR #063.

[1] This change does not solve problems if buffers are still in use when
    unloading if_sk.ko. There is ongoing work which will address jumbogram
    allocations in a more general way.

PR:		kern/75677 (with changes, no mii fixes in here)
Tested by:	net, Antoine Brodin (slightly different version)
Approved by:	rwatson (mentor)
MFC after:	5 days
2005-03-17 14:27:22 +00:00
Bjoern A. Zeeb
9f0877efe3 * Lower interrupt moderation timer 200->100.
Obtained from:	NetBSD if_sk.c rev. 1.11

* Make interrupt moderation configurable via sysctl/tuneable.
PR:		kern/41220
Approved by:	rwatson (mentor)
2005-03-17 14:23:13 +00:00
Bjoern A. Zeeb
2dfd4c0a21 * Improve chip identification.
Obtained from:	NetBSD if_sk.c rev. 1.11

* Take PHY out of reset for Yukon Lite Rev. A3.
Submitted by:	postings on net@ in thread "skc0: no PHY found", 2005-02-22

Tested by:	net
Approved by:	rwatson (mentor)
MFC after:	5 days
2005-03-17 14:21:51 +00:00
Bjoern A. Zeeb
d34019b31e * When adding/deleting multicast addresses, only whack the address filter
if the interface is marked RUNNING.
Obtained from:	NetBSD if_sk.c rev. 1.12

* Don't initialize the card (and start an autonegotiation) every time the IP
  address changes. Makes 'dhclient sk0' invocations way faster and more
  consistant. i.e. one DHCPREQUEST elicits the DHCPACK.
Obtained from:	OpenBSD if_sk.c rev. 1.56

* Additional locking changes in sk_ioctl.

PR:		kern/61296 should see improvements by the last two.
Approved by:	rwatson (mentor)
MFC after:	5 days
2005-03-17 14:18:58 +00:00
Warner Losh
d24ae19d0e Fix style(9) issues with __P removal.
Noticed by: bde
2005-02-24 22:33:05 +00:00
Warner Losh
d701c91325 Return BUS_PROBE_DEFAULT instead of 0. 2005-02-24 21:32:56 +00:00
Bjoern A. Zeeb
9eed64cad9 Cleanup debugging code and put it under bootverbose
(includes minor style polishing).

Approved by:	rwatson (mentor)
2005-01-29 19:26:53 +00:00
Warner Losh
60727d8b86 /* -> /*- for license, minor formatting changes 2005-01-07 02:29:27 +00:00
Max Laier
b9c5f41258 Enable sk(4) for ATLQ.
Thoroughly tested by:	Ender <ender NO tog SPAM net>
MFC after:		4 weeks
2004-12-24 14:13:38 +00:00
Bjoern A. Zeeb
969e69711e Enable jumbo frames on Yukon variants of sk(4).
In contrast to OpenBSD we enable jumbo frame support
depending on MTU setting (like done for xmac).

Approved by:	pjd (mentor)
Obtained from:	OpenBSD if_sk.c r1.52 (YU_SMR_MFL_JUMBO flag)
Tested by:	Heinz Knocke <knockefreebsd at o2 dot pl>
MFC after:	5 days
2004-12-20 10:07:12 +00:00
John-Mark Gurney
39189ef797 only clear the IFF_OACTIVE flag when we have a chance of being able to
queue a packet to the hardware... instead of when the hardware queue is
empty..

don't initalize cur_tx now that it doesn't need to be...

Pointed out by:	bde
2004-11-17 21:35:22 +00:00
John-Mark Gurney
c42f170477 move the lock after the NULL check so we don't have a hard(er) to diagnose
panic...

Pointed out by:	Bjoern A. Zeeb
2004-11-15 22:24:32 +00:00
John-Mark Gurney
069114c230 fix the missing lock in sk_jfree (verified w/ an assert)
also fix up handling and proding of the tx, _OACTIVE is now handled
better...

Submitted by:	Peter Edwards (sk_jfree)
Obtained from:	OpenBSD and/or NetBSD (tx prod)
2004-11-15 19:37:21 +00:00
David E. O'Brien
acebe0cb2c Commit more debugging output. This is a little bit of using a large hammer,
but sk(4) is so prevalent on AMD64 motherboards we need to reduce the number
of round trips in the mailing lists trying to get sufficient information to
make sure we've got a handle on all the problems and are working towards
making sk(4) solid.

Submitted by:	bz
2004-11-14 20:17:01 +00:00
Bjoern A. Zeeb
70502bea85 Set ramsize depending on a value from eprom instead of using
hardcoded 128k for Yukon devices. 88E8001 only has 64k of on-chip RAM[1].

[1] http://www.marvell.com/products/pcconn/yukon/Yukon_88E8001_10_073103_final.pdf

Tested by:	amd64, current
Approved by:	rwatson (mentor)
MFC after:	1 week
2004-11-13 20:21:57 +00:00