machine-independent support for superpages. (The earlier part was
the rewrite of the physical memory allocator.) The remainder of the
code required for superpages support is machine-dependent and will
be added to the various pmap implementations at a later date.
Initially, I am only supporting one large page size per architecture.
Moreover, I am only enabling the reservation system on amd64. (In
an emergency, it can be disabled by setting VM_NRESERVLEVELS to 0
in amd64/include/vmparam.h or your kernel configuration file.)
dump using mechanically generated/extracted debugging output rather than
a simple memory dump. Current sources of debugging output are:
- DDB output capture buffer, if there is captured output to save
- Kernel message buffer
- Kernel configuration, if included in kernel
- Kernel version string
- Panic message
Textdumps are stored in swap/dump partitions as with regular dumps, but
are laid out as ustar files in order to allow multiple parts to be stored
as a stream of sequentially written blocks. Blocks are written out in
reverse order, as the size of a textdump isn't known a priori. As with
regular dumps, they will be extracted using savecore(8).
One new DDB(4) command is added, "textdump", which accepts "set",
"unset", and "status" arguments. By default, normal kernel dumps are
generated unless "textdump set" is run in order to schedule a textdump.
It can be canceled using "textdump unset" to restore generation of a
normal kernel dump.
Several sysctls exist to configure aspects of textdumps;
debug.ddb.textdump.pending can be set to check whether a textdump is
pending, or set/unset in order to control whether the next kernel dump
will be a textdump from userspace.
While textdumps don't have to be generated as a result of a DDB script
run automatically as part of a kernel panic, this is a particular useful
way to use them, as instead of generating a complete memory dump, a
simple transcript of an automated DDB session can be captured using the
DDB output capture and textdump facilities. This can be used to
generate quite brief kernel bug reports rich in debugging information
but not dependent on kernel symbol tables or precisely synchronized
source code. Most textdumps I generate are less than 100k including
the full message buffer. Using textdumps with an interactive debugging
session is also useful, with capture being enabled/disabled in order to
record some but not all of the DDB session.
MFC after: 3 months
define a set of named scripts. Each script consists of a list of DDB
commands separated by ";"s that will be executed verbatim. No higher
level language constructs, such as branching, are provided for:
scripts are executed by sequentially injecting commands into the DDB
input buffer.
Four new commands are present in DDB: "run" to run a specific script,
"script" to define or print a script, "scripts" to list currently
defined scripts, and "unscript" to delete a script, modeled on shell
alias commands. Scripts may also be manipulated using sysctls in the
debug.ddb.scripting MIB space, although users will prefer to use the
soon-to-be-added ddb(8) tool for usability reasons.
Scripts with certain names are automatically executed on various DDB
events, such as entering the debugger via a panic, a witness error,
watchdog, breakpoint, sysctl, serial break, etc, allowing customized
handling.
MFC after: 3 months
captured to a memory buffer for later inspection using sysctl(8), or in the
future, to a textdump.
A new DDB command, "capture", is added, which accepts arguments "on", "off",
"reset", and "status".
A new DDB sysctl tree, debug.ddb.capture, is added, which can be used to
resize the capture buffer and extract buffer contents.
MFC after: 3 months
a pointer to struct bus_space. The structure contains function
pointers that do the actual bus space access.
The reason for this change is that previously all bus space
accesses were little endian (i.e. had an explicit byte-swap
for multi-byte accesses), because all busses on Macs are little
endian.
The upcoming support for Book E, and in particular the E500
core, requires support for big-endian busses because all
embedded peripherals are in the native byte-order.
With this change, there's no distinction between I/O port
space and memory mapped I/O. PowerPC doesn't have I/O port
space. Busses assign tags based on the byte-order only.
For that purpose, two global structures exist (bs_be_tag and
bs_le_tag), of which the address can be taken to get a valid
tag.
Obtained from: Juniper, Semihalf
and t3_push_frames).
- Import latest changes to cxgb_main.c and cxgb_sge.c from toestack p4 branch
- make driver local copy of tcp_subr.c and tcp_usrreq.c and override tcp_usrreqs so
TOE can also functions on versions with unmodified TCP
- add cxgb back to the build
processors (it's the PowerPC Operating Environment Architecture).
AIM designates the processors made by the Apple-IBM-Motorola
alliance and those we typically support.
While here, remove the NetBSD option IPKDB. It's not an option
used by us. Also, PPC_HAVE_FPU is not used by us either. Remove
that too.
Obtained from: Juniper, Semihalf
the ABI when enabled. There is no longer an embedded lock_profile_object
in each lock. Instead a list of lock_profile_objects is kept per-thread
for each lock it may own. The cnt_hold statistic is now always 0 to
facilitate this.
- Support shared locking by tracking individual lock instances and
statistics in the per-thread per-instance lock_profile_object.
- Make the lock profiling hash table a per-cpu singly linked list with a
per-cpu static lock_prof allocator. This removes the need for an array
of spinlocks and reduces cache contention between cores.
- Use a seperate hash for spinlocks and other locks so that only a
critical_enter() is required and not a spinlock_enter() to modify the
per-cpu tables.
- Count time spent spinning in the lock statistics.
- Remove the LOCK_PROFILE_SHARED option as it is always supported now.
- Specifically drop and release the scheduler locks in both schedulers
since we track owners now.
In collaboration with: Kip Macy
Sponsored by: Nokia
cards:
o RocketRAID 172x series
o RocketRAID 174x series
o RocketRAID 2210
o RocketRAID 222x series
o RocketRAID 2240
o RocketRAID 230x series
o RocketRAID 231x series
o RocketRAID 232x series
o RocketRAID 2340
o RocketRAID 2522
Many thanks to Highpoint for their continued support of FreeBSD.
Submitted by: Highpoint
o Disklabels can have between 8 and 20 partitions (inclusive).
o No device special file is created for the raw partition.
o Switch ia64 to use this backend.
o No support for boot code yet.
INCLUDE_CONFIG_FILE. Make a user to look at what config(8) actually does,
and how can one fetch actual configuration file.
Reported by: many
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
- Introduce per-architecture stack_machdep.c to hold stack_save(9).
- Introduce per-architecture machine/stack.h to capture any common
definitions required between db_trace.c and stack_machdep.c.
- Add new kernel option "options STACK"; we will build in stack(9) if it is
defined, or also if "options DDB" is defined to provide compatibility
with existing users of stack(9).
Add new stack_save_td(9) function, which allows the capture of a stacktrace
of another thread rather than the current thread, which the existing
stack_save(9) was limited to. It requires that the thread be neither
swapped out nor running, which is the responsibility of the consumer to
enforce.
Update stack(9) man page.
Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v
Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
hack means you can get the units and flags to match up more easily with
serial consoles on machines with acpi tables that cause the com ports
to be probed in the wrong order (and hence get the wrong sio unit number).
This replaces the common alternative hack of editing the code to comment
out the acpi attachment. This could go away entirely when device wiring
patches are committed.
Currently, Giant is not too much contented so that it is ok to treact it
like any other mutexes.
Please don't forget to update your own custom config kernel files.
Approved by: cognet, marcel (maintainers of arches where option is
not enabled at the moment)
bumped to 800004 to note the change though userland apps should not be
affected since they use <sys/agpio.h> rather than the headers in
sys/dev/agp.
Discussed with: anholt
Repocopy by: simon
This includes:
o mtree (for legal/intel_wpi)
o manpage for i386/amd64 archs
o module for i386/amd64 archs
o NOTES for i386/amd64 archs
Approved by: mlaier (comentor)
lock optimized for almost exclusive reader access. (see also rmlock.9)
TODO:
Convert to per cpu variables linkerset as soon as it is available.
Optimize UP (single processor) case.
in the TrustedBSD MAC Framework:
- Add mac_atalk.c and add explicit entry point mac_netatalk_aarp_send()
for AARP packet labeling, rather than using a generic link layer
entry point.
- Add mac_inet6.c and add explicit entry point mac_netinet6_nd6_send()
for ND6 packet labeling, rather than using a generic link layer entry
point.
- Add expliict entry point mac_netinet_arp_send() for ARP packet
labeling, and mac_netinet_igmp_send() for IGMP packet labeling,
rather than using a generic link layer entry point.
- Remove previous genering link layer entry point,
mac_mbuf_create_linklayer() as it is no longer used.
- Add implementations of new entry points to various policies, largely
by replicating the existing link layer entry point for them; remove
old link layer entry point implementation.
- Make MAC_IFNET_LOCK(), MAC_IFNET_UNLOCK(), and mac_ifnet_mtx global
to the MAC Framework rather than static to mac_net.c as it is now
needed outside of mac_net.c.
Obtained from: TrustedBSD Project
refactored it to be a generic device.
Instead of being part of the standard kernel, there is now a 'nvram' device
for i386/amd64. It is in DEFAULTS like io and mem, and can be turned off
with 'nodevice nvram'. This matches the previous behavior when it was
first committed.
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
