Commit Graph

23 Commits

Author SHA1 Message Date
Brian Somers
057f1760a8 Make ppp WARNS=5 clean 2004-09-05 01:46:52 +00:00
Brian Somers
30949fd4b5 o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

  It's now possible to manage IPv6 interface addresses and routing
  table entries and to filter IPV6 traffic whether encapsulated or
  not.

  IPV6CP support is crude for now, and hasn't been tested against
  any other implementations.

  RADIUS and IPv6 are independent of eachother for now.

  ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
  few.

o Allow a mask specification for the ``delete'' command.  It's now
  possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
  interface addresses rather than doing it just for the ``current''
  peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
  add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
  tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
  When display traffic, display at least some information about unrecognised
  traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
Brian Somers
f013f33ee2 To avoid namespace polution in NetBSD:
``struct descriptor'' -> ``struct fdescriptor''
2000-03-14 01:46:09 +00:00
Brian Somers
82de8666e1 Use AUTHLEN for the length of authname 2000-01-17 12:27:29 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Brian Somers
ab2de065b2 o Obsolete the undocumented ``set weight'' command.
o If we're using RADIUS and the RADIUS mtu is less than our
  peers mru/mrru, reduce our mtu to this value for NetBSD too.
o Make struct throughput's sample period dynamic and tweak the ppp
  version number to reflect the extra stuff being passed through
  the local domain socket as a result (MP mode).
o Measure the current throughput based on the number of samples actually
  taken rather than on the full sample period.
o Keep the throughput statisics persistent while being passed to
  another ppp invocation through the local domain socket.
o When showing throughput statistics after the timer has stopped, use
  the stopped time for overall calculations, not the current time.
  Also show the stopped time and how long the current throughput has
  been sampled for.
o Use time() consistently in throughput.c
o Tighten up the ``show bundle'' output.
o Introduce the ``set bandwidth'' command.
o Rewrite the ``set autoload'' command.  It now takes three arguments
  and works based on a rolling bundle throughput average compared against
  the theoretical bundle bandwidth over a given period (read: it's now
  functional).
1999-08-05 10:32:16 +00:00
Brian Somers
7063995c94 Allow our endpoint discriminator to be enabled, disabled, accepted
and denied.  This is necessary for some MP implementations that
get confused if you accept their endpoint discriminator but reject
their MRRU.
1999-06-09 16:54:04 +00:00
Brian Somers
5d9e610366 o Redesign the layering mechanism and make the aliasing code part of
the layering.

  We now ``stack'' layers as soon as we open the device (when we figure
  out what we're dealing with).  A static set of `dispatch' routines are
  also declared for dealing with incoming packets after they've been
  `pulled' up through the stacked layers.

  Physical devices are now assigned handlers based on the device type
  when they're opened.  For the moment there are three device types;
  ttys, execs and tcps.

o Increment version number to 2.2
o Make an entry in [uw]tmp for non-tty -direct invocations (after
  pap/chap authentication).
o Make throughput counters quad_t's
o Account for the absolute number of mbuf malloc()s and free()s in
  ``show mem''.
o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
Brian Somers
6f8e9f0a8a If we've got a full output buffer queue and cannot send
anything for two mintues (see ``set choked'' and ``show
bundle''), nuke the ip, mp and link level buffer queues.

This should fix problems where ``ppp -auto'' seems to stop
responding after failing to connect to the peer a few times.
1998-08-25 17:48:43 +00:00
Brian Somers
86b1f0d762 o Make sure we adjust our min seq and process any outstanding queued
incoming fragments when a link goes down.
o Don't use the minimum sequence numbers of links that aren't open.
o Understand sequence number wrapping when determining the minimum
  sequence number.
o Add & adjust a few comments.
1998-05-23 17:05:28 +00:00
Brian Somers
d91d286164 MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.
1998-05-21 21:49:08 +00:00
Brian Somers
9c53a7b1c5 o Display current link throughput in `show links' (assuming
throughput measurement is enabled).
o Load balance the links based on weight *and* on a round-robin
  basis.  This makes things fairly even on an output basis.  We
  don't try to allow for the peer sending all his data down one
  link (and try to send ours back up the other).
o Show the number of pending input buffers that can't be processed
  in ``show mp''.
o Fix a typo in the man page.
1998-05-03 22:13:14 +00:00
Brian Somers
96c9bb21aa o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS,
using the scatter/gather array to transfer the link
  information.  The whole link is now passed in one message.

This is far better than the two `/bin/cat' processes per additional
link :-)  I remember years ago thinking that file descriptor
transferral would be a really amazing facility !

Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
         and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
Brian Somers
dd7e261079 Cosmetic: Make our external function names consistent. 1998-05-01 19:26:12 +00:00
Brian Somers
6f38457323 o Create a new `timer'' log level. This lets us `set
log debug'' without filling our filesystem/screen with
  junk that we don't really want to see.
o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming
  connections that aren't on STDIN_FILENO now.
o Allow return values from our FSM LayerUp functions.  If
  LayerUp() fails, the FSM does an immediate FsmDown() without
  calling the fsm_parent's Layer{Up,Down} functions.
o Clear the close-on-exec flag of file descriptor 3 when executing
  chat programs so that our documented ability to communicate with
  /dev/tty via that descriptor works.  Also document it as
  descriptor 3, not 4 :-O
o Allow a ``rm'' command as an alias for ``remove''.
o Fix the bind()/connect()/accept() calls made by the MP server.
o Create bundle_SendDatalink() and bundle_ReceiveDatalink().
  This allows `struct datalink's to flatten themselves, pass
  through a pipe (read: the eye of a needle !) and come alive
  at the other end.  The donator then fork()s & exec()s pppmpipe,
  ``passing'' the connection to another ppp instance.

   *** PPP NOW TALKS MULTILINK :-))) ***

Our link utilization is hideous, and lots of code needs
tidying still.  It's also probably riddled with bugs !
It's been tested against itself only, and has hung once,
so confidence isn't high....
1998-04-30 23:53:56 +00:00
Brian Somers
1fa665f5b3 o Add the link name to modem diagnostics.
o Create struct mpserver as part of struct mp.
  mpserver creates a unix-domain socket based on the
  peers auth name and endpoint discriminator.  If it
  already exists, ppp will ``pass the link'' over to
  the owner of the socket, joining it into the bundle
  of another ppp invocation, otherwise ppp waits for
  other invocations to pass it links through this
  socket.
  The final piece of code will be the code that flattens
  our datalink info and passes it down this channel
  (not yet implemented).
1998-04-28 01:25:46 +00:00
Brian Somers
184d1da22a Show our link name when we fail to mp_Up(). 1998-04-25 00:09:22 +00:00
Brian Somers
643f49047e o Defer setting up pap/chap based IP numbers & labels until after
we've determined if we're going to join another ppp invocation.
o Make ``show link'' show all link details, and ``show links''
  just give a list of links and their current status.
o Show our current label in ``show bundle''.
o Allow link cloning and removal as soon as our MRRU is set.
o Make ``show lcp'' require context as nothing will ever change
  in our MP LCP (it's auto-configured as per rfc1990).
o Initialise our LQM owner in hdlc_Init().
o Store our endpoint discriminator and authentication name at both
  the datalink and multilink level and compare them when we've
  finished AUTHENTICATE phase and before entering NETWORK phase.
  If they don't match, close the link again.
  Display the information in the appropriate ``show'' command.
o Initialise datalink::phone and datalink::fsmp.object properly
  when we're cloning the link.
o Show which link we're passing LQRs on in our diagnostics.
o Reject endpoint discriminator REQs at the logical multilink
  level.
o Remove the rest of our CARRIER and LINK logging setup.
1998-04-24 19:16:15 +00:00
Brian Somers
086760227f Create #defines for all endpoint discriptor classes,
and allow `set enddisc mac'.
1998-04-23 23:50:40 +00:00
Brian Somers
673903ec42 o Initialise MP correctly depending on if we're the
first link in mp_Up().
o Bring MP and its CCP down when we enter phase TERMINATE,
  and ditch everything in the incoming packet queue.
o Enable MRRU negotiation.  Now, we can multilink
  mode, but only with one physical link.
o Close the link if the peer PROTO REJs PROTO_MP.
o Prepend our protocol before passing a packet to
  struct mp for fragmentation.
o Log info messages to DEBUG, not ERROR (oops).
o Align `show mp' output (again).
1998-04-23 21:50:13 +00:00
Brian Somers
49052c9523 Negotiate MRRU, SHORTSEQ and ENDDISC. ENDDISC doesn't imply
multilink ('cos I've seen my ISP REQ it without multilink).

Setting MRRU is ifdef'd out until it's debugged and we can
merge -direct links with other running programs.

Fix MTU setting.
1998-04-23 03:23:03 +00:00
Brian Somers
2764b86afd o Move alias function pointers into loadalias.c
o Move Var*Version into command.c
o Remove struct pppVars (and there was much rejoicing) !
o Forward-decl some structs in .h files to avoid include
  ordering requirements and remove a few more redundant
  #includes.
1998-04-07 00:54:26 +00:00
Brian Somers
3b0f8d2ed6 o Move struct lcp and struct ccp into struct link.
o Remove bundle2lcp(), bundle2ccp() and bundle2link().
  They're too resource-hungry and we have `owner pointers'
  to do their job.
o Make our FSM understand LCPs that are always ST_OPENED
  (with a minimum code that != 1).
o Send FSM code rejects for invalid codes.
o Make our bundle fsm_parent deal with multiple links.
o Make timer diagnostics pretty and allow access via ~t
  in `term' mode (not just when logging debug) and
  `show timers'.  Only show timers every second in debug
  mode, otherwise we get too many diagnostics to be useful
  (we probably still do).  Also, don't restrict ~m in term
  mode to depend on debug logging.
o Rationalise our bundles' phases.
o Create struct mp (multilink protocol).  This is both an
  NCP and a type of struct link.  It feeds off other NCPs
  for output, passing fragmented packets into the queues
  of available datalinks.  It also gets PROTO_MP input,
  reassembles the fragments into ppp frames, and passes
  them back to the HDLC layer that the fragments were passed
  from.
  ** It's not yet possible to enter multilink mode :-( **
o Add `set weight' (requires context) for deciding on a links
  weighting in multilink mode.  Weighting is simplistic (and
  probably badly implemented) for now.
o Remove the function pointers in struct link.  They ended up
  only applying to physical links.
o Configure our tun device with an MTU equal to the MRU from
  struct mp's LCP and a speed equal to the sum of our link
  speeds.
o `show {lcp,ccp,proto}' and `set deflate' now have optional
  context and use ChooseLink() to decide on which `struct link'
  to use.  This allows behaviour as before when in non-multilink
  mode, and allows access to the MP logical link in multilink
  mode.
o Ignore reconnect and redial values when in -direct mode and
  when cleaning up.  Always redial when in -ddial or -dedicated
  mode (unless cleaning up).
o Tell our links to `staydown' when we close them due to a signal.
o Remove remaining `#ifdef SIGALRM's (ppp doesn't function without
  alarms).
o Don't bother strdup()ing our physical link name.
o Various other cosmetic changes.
1998-04-03 19:21:56 +00:00