Commit Graph

38 Commits

Author SHA1 Message Date
Kevin Lo
5bbe0c5357 ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again
Reviewed by:	yongari
2012-01-07 09:41:57 +00:00
Justin T. Gibbs
578e4bf777 Update netfront so that it queries and honors published
back-end features.

sys/dev/xen/netfront/netfront.c:
	o Add xn_query_features() which reads the XenStore and
	  records the TSO, LRO, and chained ring-request support
	  of the backend.
	o Rename xn_configure_lro() to xn_configure_features() and
	  use this routine to manage the setup of TSO, LRO, and
	  checksum offload.
	o In create_netdev(), initialize if_capabilities and
	  if_hwassist to the capabilities found on all backends.
	  Delegate configuration of if_capenable and the TSO flag
	  if if_hwassist to xn_configure_features().

Reported by:	Hugo Silva (fix inspired by patch provided)
Approved by:	re
MFC after:	1 week
2011-09-21 00:15:29 +00:00
Justin T. Gibbs
ffa06904b5 Modify the netfront driver so it can successfully attach to
PV devices with the ioemu attribute set.

sys/dev/xen/netfront/netfront.c:
	o If a mac address for the interface cannot be found
	  in the front-side XenStore tree, look for an entry
	  in the back-side tree.  With ioemu devices, the
	  emulator does not populate the front side tree and
	  neither does Xend.
	o Return an error rather than panic when an attach
	  attempt fails.

Reported by:	Janne Snabb (fix inspired by patch provided)
PR:		kern/154302
Approved by:	re
2011-09-21 00:13:04 +00:00
Justin T. Gibbs
cf9c09e1f3 Correct suspend/resume support in the Netfront driver.
Sponsored by: BQ Internet

sys/dev/xen/netfront/netfront.c:
	o Implement netfront_suspend(), a specialized suspend
	  handler for the netfront driver.  This routine simply
	  disables the carrier so the driver is idle during
	  system suspend processing.
	o Fix a leak when re-initializing LRO during a link reset.
	o In netif_release_tx_bufs(), when cleaning up the grant
	  references for our TX ring, use gnttab_end_foreign_access_ref
	  instead of attempting to grant the page again.
	o In netif_release_tx_bufs(), we do not track mbufs associated
	  with mbuf chains, but instead just free each mbuf directly.
	  Use m_free(), not m_freem(), to avoid double frees of mbufs.
	o Refactor some code to enhance clarity.

Approved by:	re
MFC after:	1 week
2011-09-21 00:08:25 +00:00
Justin T. Gibbs
283d6f7287 Monitor and emit events for XenStore changes to XenBus trees
of the devices we manage.  These changes can be due to writes
we make ourselves or due to changes made by the control domain.
The goal of these changes is to insure that all state transitions
can be detected regardless of their source and to allow common
device policies (e.g. "onlined" backend devices) to be centralized
in the XenBus bus code.

sys/xen/xenbus/xenbusvar.h:
sys/xen/xenbus/xenbus.c:
sys/xen/xenbus/xenbus_if.m:
	Add a new method for XenBus drivers "localend_changed".
	This method is invoked whenever a write is detected to
	a device's XenBus tree.  The default implementation of
	this method is a no-op.

sys/xen/xenbus/xenbus_if.m:
sys/dev/xen/netfront/netfront.c:
sys/dev/xen/blkfront/blkfront.c:
sys/dev/xen/blkback/blkback.c:
	Change the signature of the "otherend_changed" method.
	This notification cannot fail, so it should return void.

sys/xen/xenbus/xenbusb_back.c:
	Add "online" device handling to the XenBus Back Bus
	support code.  An online backend device remains active
	after a front-end detaches as a reconnect is expected
	to occur in the near future.

sys/xen/interface/io/xenbus.h:
	Add comment block further explaining the meaning and
	driver responsibilities associated with the XenBus
	Closed state.

sys/xen/xenbus/xenbusb.c:
sys/xen/xenbus/xenbusb.h:
sys/xen/xenbus/xenbusb_back.c:
sys/xen/xenbus/xenbusb_front.c:
sys/xen/xenbus/xenbusb_if.m:
	o Register a XenStore watch against the local XenBus tree
	  for all devices.
	o Cache the string length of the path to our local tree.
	o Allow the xenbus front and back drivers to hook/filter both
	  local and otherend watch processing.
	o Update the device ivar version of "state" when we detect
	  a XenStore update of that node.

sys/dev/xen/control/control.c:
sys/xen/xenbus/xenbus.c:
sys/xen/xenbus/xenbusb.c:
sys/xen/xenbus/xenbusb.h:
sys/xen/xenbus/xenbusvar.h:
sys/xen/xenstore/xenstorevar.h:
	Allow clients of the XenStore watch mechanism to attach
	a single uintptr_t worth of client data to the watch.
	This removes the need to carefully place client watch
	data within enclosing objects so that a cast or offsetof
	calculation can be used to convert from watch to enclosing
	object.

Sponsored by:	Spectra Logic Corporation
MFC after:	1 week
2011-06-11 04:59:01 +00:00
Bjoern A. Zeeb
a0ae8f04e8 Make various (pseudo) interfaces compile without INET in the kernel
adding appropriate #ifdefs.  For module builds the framework needs
adjustments for at least carp.

Reviewed by:	gnn
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC after:	4 days
2011-04-27 19:30:44 +00:00
Justin T. Gibbs
8577146eac Fix bug in the netfront driver that caused excessive packet drops during
receive processing.

Remove unnecessary restrictions on the mbuf chain length built during an
LRO receive.  This restriction was copied from the Linux netfront driver
where the LRO implementation cannot handle more than 18 discontinuities.
The FreeBSD implementation has no such restriction.

MFC after: 1 week
2011-01-29 02:36:45 +00:00
Robert Watson
2913e88c91 Make "options XENHVM" compile for i386, not just amd64 -- a largely
mechanical change.  This opens the door for using PV device drivers
under Xen HVM on i386, as well as more general harmonisation of i386
and amd64 Xen support in FreeBSD.

Reviewed by:    cperciva
MFC after:      3 weeks
2011-01-04 14:49:54 +00:00
Justin T. Gibbs
ff662b5c98 Improve the Xen para-virtualized device infrastructure of FreeBSD:
o Add support for backend devices (e.g. blkback)
 o Implement extensions to the Xen para-virtualized block API to allow
   for larger and more outstanding I/Os.
 o Import a completely rewritten block back driver with support for fronting
   I/O to both raw devices and files.
 o General cleanup and documentation of the XenBus and XenStore support code.
 o Robustness and performance updates for the block front driver.
 o Fixes to the netfront driver.

Sponsored by: Spectra Logic Corporation

sys/xen/xenbus/init.txt:
	Deleted: This file explains the Linux method for XenBus device
	enumeration and thus does not apply to FreeBSD's NewBus approach.

sys/xen/xenbus/xenbus_probe_backend.c:
	Deleted: Linux version of backend XenBus service routines.  It
	was never ported to FreeBSD.  See xenbusb.c, xenbusb_if.m,
	xenbusb_front.c xenbusb_back.c for details of FreeBSD's XenBus
	support.

sys/xen/xenbus/xenbusvar.h:
sys/xen/xenbus/xenbus_xs.c:
sys/xen/xenbus/xenbus_comms.c:
sys/xen/xenbus/xenbus_comms.h:
sys/xen/xenstore/xenstorevar.h:
sys/xen/xenstore/xenstore.c:
	Split XenStore into its own tree.  XenBus is a software layer built
	on top of XenStore.  The old arrangement and the naming of some
	structures and functions blurred these lines making it difficult to
	discern what services are provided by which layer and at what times
	these services are available (e.g. during system startup and shutdown).

sys/xen/xenbus/xenbus_client.c:
sys/xen/xenbus/xenbus.c:
sys/xen/xenbus/xenbus_probe.c:
sys/xen/xenbus/xenbusb.c:
sys/xen/xenbus/xenbusb.h:
	Split up XenBus code into methods available for use by client
	drivers (xenbus.c) and code used by the XenBus "bus code" to
	enumerate, attach, detach, and service bus drivers.

sys/xen/reboot.c:
sys/dev/xen/control/control.c:
	Add a XenBus front driver for handling shutdown, reboot, suspend, and
	resume events published in the XenStore.  Move all PV suspend/reboot
	support from reboot.c into this driver.

sys/xen/blkif.h:
	New file from Xen vendor with macros and structures used by
	a block back driver to service requests from a VM running a
	different ABI (e.g. amd64 back with i386 front).

sys/conf/files:
	Adjust kernel build spec for new XenBus/XenStore layout and added
	Xen functionality.

sys/dev/xen/balloon/balloon.c:
sys/dev/xen/netfront/netfront.c:
sys/dev/xen/blkfront/blkfront.c:
sys/xen/xenbus/...
sys/xen/xenstore/...
	o Rename XenStore APIs and structures from xenbus_* to xs_*.
	o Adjust to use of M_XENBUS and M_XENSTORE malloc types for allocation
	  of objects returned by these APIs.
	o Adjust for changes in the bus interface for Xen drivers.

sys/xen/xenbus/...
sys/xen/xenstore/...
	Add Doxygen comments for these interfaces and the code that
	implements them.

sys/dev/xen/blkback/blkback.c:
	o Rewrite the Block Back driver to attach properly via newbus,
	  operate correctly in both PV and HVM mode regardless of domain
	  (e.g. can be in a DOM other than 0), and to deal with the latest
	  metadata available in XenStore for block devices.

	o Allow users to specify a file as a backend to blkback, in addition
	  to character devices.  Use the namei lookup of the backend path
	  to automatically configure, based on file type, the appropriate
	  backend method.

	The current implementation is limited to a single outstanding I/O
	at a time to file backed storage.

sys/dev/xen/blkback/blkback.c:
sys/xen/interface/io/blkif.h:
sys/xen/blkif.h:
sys/dev/xen/blkfront/blkfront.c:
sys/dev/xen/blkfront/block.h:
	Extend the Xen blkif API: Negotiable request size and number of
	requests.

	This change extends the information recorded in the XenStore
	allowing block front/back devices to negotiate for optimal I/O
	parameters.  This has been achieved without sacrificing backward
	compatibility with drivers that are unaware of these protocol
	enhancements.  The extensions center around the connection protocol
	which now includes these additions:

	o The back-end device publishes its maximum supported values for,
	  request I/O size, the number of page segments that can be
	  associated with a request, the maximum number of requests that
	  can be concurrently active, and the maximum number of pages that
	  can be in the shared request ring.  These values are published
	  before the back-end enters the XenbusStateInitWait state.

	o The front-end waits for the back-end to enter either the InitWait
	  or Initialize state.  At this point, the front end limits it's
	  own capabilities to the lesser of the values it finds published
	  by the backend, it's own maximums, or, should any back-end data
	  be missing in the store, the values supported by the original
	  protocol.  It then initializes it's internal data structures
	  including allocation of the shared ring, publishes its maximum
	  capabilities to the XenStore and transitions to the Initialized
	  state.

	o The back-end waits for the front-end to enter the Initalized
	  state.  At this point, the back end limits it's own capabilities
	  to the lesser of the values it finds published by the frontend,
	  it's own maximums, or, should any front-end data be missing in
	  the store, the values supported by the original protocol.  It
	  then initializes it's internal data structures, attaches to the
	  shared ring and transitions to the Connected state.

	o The front-end waits for the back-end to enter the Connnected
	  state, transitions itself to the connected state, and can
	  commence I/O.

	Although an updated front-end driver must be aware of the back-end's
	InitWait state, the back-end has been coded such that it can
	tolerate a front-end that skips this step and transitions directly
	to the Initialized state without waiting for the back-end.

sys/xen/interface/io/blkif.h:
	o Increase BLKIF_MAX_SEGMENTS_PER_REQUEST to 255.  This is
	  the maximum number possible without changing the blkif
	  request header structure (nr_segs is a uint8_t).

	o Add two new constants:
	  BLKIF_MAX_SEGMENTS_PER_HEADER_BLOCK, and
	  BLKIF_MAX_SEGMENTS_PER_SEGMENT_BLOCK.  These respectively
	  indicate the number of segments that can fit in the first
	  ring-buffer entry of a request, and for each subsequent
	  (sg element only) ring-buffer entry associated with the
          "header" ring-buffer entry of the request.

	o Add the blkif_request_segment_t typedef for segment
	  elements.

	o Add the BLKRING_GET_SG_REQUEST() macro which wraps the
	  RING_GET_REQUEST() macro and returns a properly cast
	  pointer to an array of blkif_request_segment_ts.

	o Add the BLKIF_SEGS_TO_BLOCKS() macro which calculates the
	  number of ring entries that will be consumed by a blkif
	  request with the given number of segments.

sys/xen/blkif.h:
	o Update for changes in interface/io/blkif.h macros.

	o Update the BLKIF_MAX_RING_REQUESTS() macro to take the
	  ring size as an argument to allow this calculation on
	  multi-page rings.

	o Add a companion macro to BLKIF_MAX_RING_REQUESTS(),
	  BLKIF_RING_PAGES().  This macro determines the number of
	  ring pages required in order to support a ring with the
	  supplied number of request blocks.

sys/dev/xen/blkback/blkback.c:
sys/dev/xen/blkfront/blkfront.c:
sys/dev/xen/blkfront/block.h:
	o Negotiate with the other-end with the following limits:
	      Reqeust Size:   MAXPHYS
	      Max Segments:   (MAXPHYS/PAGE_SIZE) + 1
	      Max Requests:   256
	      Max Ring Pages: Sufficient to support Max Requests with
	                      Max Segments.

	o Dynamically allocate request pools and segemnts-per-request.

	o Update ring allocation/attachment code to support a
	  multi-page shared ring.

	o Update routines that access the shared ring to handle
	  multi-block requests.

sys/dev/xen/blkfront/blkfront.c:
	o Track blkfront allocations in a blkfront driver specific
	  malloc pool.

	o Strip out XenStore transaction retry logic in the
	  connection code.  Transactions only need to be used when
	  the update to multiple XenStore nodes must be atomic.
	  That is not the case here.

	o Fully disable blkif_resume() until it can be fixed
	  properly (it didn't work before this change).

	o Destroy bus-dma objects during device instance tear-down.

	o Properly handle backend devices with powef-of-2 sector
	  sizes larger than 512b.

sys/dev/xen/blkback/blkback.c:
	Advertise support for and implement the BLKIF_OP_WRITE_BARRIER
	and BLKIF_OP_FLUSH_DISKCACHE blkif opcodes using BIO_FLUSH and
	the BIO_ORDERED attribute of bios.

sys/dev/xen/blkfront/blkfront.c:
sys/dev/xen/blkfront/block.h:
	Fix various bugs in blkfront.

       o gnttab_alloc_grant_references() returns 0 for success and
	 non-zero for failure.  The check for < 0 is a leftover
	 Linuxism.

       o When we negotiate with blkback and have to reduce some of our
	 capabilities, print out the original and reduced capability before
	 changing the local capability.  So the user now gets the correct
	 information.

	o Fix blkif_restart_queue_callback() formatting.  Make sure we hold
	  the mutex in that function before calling xb_startio().

	o Fix a couple of KASSERT()s.

        o Fix a check in the xb_remove_* macro to be a little more specific.

sys/xen/gnttab.h:
sys/xen/gnttab.c:
	Define GNTTAB_LIST_END publicly as GRANT_REF_INVALID.

sys/dev/xen/netfront/netfront.c:
	Use GRANT_REF_INVALID instead of driver private definitions of the
	same constant.

sys/xen/gnttab.h:
sys/xen/gnttab.c:
	Add the gnttab_end_foreign_access_references() API.

	This API allows a client to batch the release of an array of grant
	references, instead of coding a private for loop.  The implementation
	takes advantage of this batching to reduce lock overhead to one
	acquisition and release per-batch instead of per-freed grant reference.

	While here, reduce the duration the gnttab_list_lock is held during
	gnttab_free_grant_references() operations.  The search to find the
	tail of the incoming free list does not rely on global state and so
	can be performed without holding the lock.

sys/dev/xen/xenpci/evtchn.c:
sys/dev/xen/evtchn/evtchn.c:
sys/xen/xen_intr.h:
	o Implement the bind_interdomain_evtchn_to_irqhandler API for HVM mode.
	  This allows an HVM domain to serve back end devices to other domains.
	  This API is already implemented for PV mode.

	o Synchronize the API between HVM and PV.

sys/dev/xen/xenpci/xenpci.c:
	o Scan the full region of CPUID space in which the Xen VMM interface
	  may be implemented.  On systems using SuSE as a Dom0 where the
	  Viridian API is also exported, the VMM interface is above the region
	  we used to search.

	o Pass through bus_alloc_resource() calls so that XenBus drivers
	  attaching on an HVM system can allocate unused physical address
	  space from the nexus.  The block back driver makes use of this
	  facility.

sys/i386/xen/xen_machdep.c:
	Use the correct type for accessing the statically mapped xenstore
	metadata.

sys/xen/interface/hvm/params.h:
sys/xen/xenstore/xenstore.c:
	Move hvm_get_parameter() to the correct global header file instead
	of as a private method to the XenStore.

sys/xen/interface/io/protocols.h:
	Sync with vendor.

sys/xeninterface/io/ring.h:
	Add macro for calculating the number of ring pages needed for an N
	deep ring.

	To avoid duplication within the macros, create and use the new
	__RING_HEADER_SIZE() macro.  This macro calculates the size of the
	ring book keeping struct (producer/consumer indexes, etc.) that
	resides at the head of the ring.

	Add the __RING_PAGES() macro which calculates the number of shared
	ring pages required to support a ring with the given number of
	requests.

	These APIs are used to support the multi-page ring version of the
	Xen block API.

sys/xeninterface/io/xenbus.h:
	Add Comments.

sys/xen/xenbus/...
	o Refactor the FreeBSD XenBus support code to allow for both front and
	  backend device attachments.

	o Make use of new config_intr_hook capabilities to allow front and back
	  devices to be probed/attached in parallel.

	o Fix bugs in probe/attach state machine that could cause the system to
	  hang when confronted with a failure either in the local domain or in
	  a remote domain to which one of our driver instances is attaching.

	o Publish all required state to the XenStore on device detach and
	  failure.  The majority of the missing functionality was for serving
	  as a back end since the typical "hot-plug" scripts in Dom0 don't
	  handle the case of cleaning up for a "service domain" that is not
	  itself.

	o Add dynamic sysctl nodes exposing the generic ivars of
	  XenBus devices.

	o Add doxygen style comments to the majority of the code.

	o Cleanup types, formatting, etc.

sys/xen/xenbus/xenbusb.c:
	Common code used by both front and back XenBus busses.

sys/xen/xenbus/xenbusb_if.m:
	Method definitions for a XenBus bus.

sys/xen/xenbus/xenbusb_front.c:
sys/xen/xenbus/xenbusb_back.c:
	XenBus bus specialization for front and back devices.

MFC after:	1 month
2010-10-19 20:53:30 +00:00
Kenneth D. Merry
931eeffaa2 A number of netfront fixes and stability improvements:
- Re-enable TSO.  This was broken previously due to CSUM_TSO clearing the
   CSUM_TCP flag, so our checksum flags were incorrectly set going to the
   netback driver.  That was fixed in r206844 in tcp_output.c, so we can
   turn TSO back on here.

 - Fix the way transmit slots are calculated, so that we can't overfill
   the ring.

 - Avoid sending packets with more fragments/segments than netback can
   handle.  The Linux netback code can only handle packets of
   MAX_SKB_FRAGS, which turns out to be 18 on machines with 4K pages.  We
   can easily generate packets with 32 or so fragments with TSO turned on.
   Right now the solution is just to drop the packets (since netback
   doesn't seem to handle it gracefully), but we should come up with a way
   to allow a driver to tell the TCP stack the maximum number of fragments
   it can handle in a single packet.

 - Fix the way the consumer is tracked in the receive path.  It could get
   out of sync fairly easily.

 - Use standard Xen ring macros to make it clearer how netfront is using
   the rings.

 - Get rid of Linux-ish negative errno return values.

 - Added more documentation to the driver.

 - Refactored code to make it easier to read.

 - Some other minor fixes.

Reviewed by:	gibbs

Reviewed by:	gibbs
Sponsored by:	Spectra Logic
MFC after:	7 days
2010-06-08 03:13:26 +00:00
Joel Dahl
8e0ad55abb Switch to our preferred 2-clause BSD license.
Approved by:	kmacy
2010-05-05 20:39:02 +00:00
Kip Macy
227ca25786 - make printf conditional
- fix witness warnings by making configuration lock a mutex
2010-02-21 01:11:39 +00:00
Justin T. Gibbs
0e5098428f Add media ioctl support and link notifications so that devd will attempt
to run dhclient on a netfront (xn) device that is setup for DHCP in
/etc/rc.conf.

PR:		kern/136251 (fixed differently than the submitted patch)
2009-12-01 17:29:25 +00:00
John Baldwin
dbd69bc565 Remove commented out reference to if_watchdog and an assignment of zero to
if_timer.

Reviewed by:	scottl
2009-11-19 20:59:40 +00:00
Kip Macy
cfed37836e update backend_changed to reflect .m prototype 2009-06-13 21:55:08 +00:00
Adrian Chadd
8cb079923f Fix compilation when compiled w/out WITNESS.
Submitted by:	Edwin Shao <poleris@gmail.com>
2009-06-07 05:52:22 +00:00
Adrian Chadd
3552092bb2 Delete useless #ifdef; make it more obvious if setting TSO fails. 2009-05-27 19:31:50 +00:00
Adrian Chadd
d76e4550e9 Clear IFF_DRV_OACTIVE if at least one TX xen/mbuf ring slot has been freed. 2009-05-27 13:59:17 +00:00
Adrian Chadd
7c66482c29 Enforce that there are actually enough xenbus TX ring descriptors available
before attempting to queue the packet.
2009-05-27 06:04:38 +00:00
Adrian Chadd
3fb28bbb67 Comment tidyup; comment where the next explicit check should
appear.
2009-05-27 05:37:04 +00:00
Adrian Chadd
a4ec37f59e Ensure that there are enough TX mbuf ring slots available before beginning
to dequeue a packet.

The tx path was trying to ensure that enough Xenbus TX ring slots existed but
it didn't check to see whether the mbuf TX ring slots were also available.
They get freed in xn_txeof() which occurs after transmission, rather than earlier
on in the process. (The same happens under Linux too.)

Due to whatever reason (CPU use, scheduling, memory constraints, whatever) the
mbuf TX ring may not have enough slots free and would allocate slot 0. This is
used as the freelist head pointer to represent "free" mbuf TX ring slots; setting
this to an actual mbuf value rather than an id crashes the code.

This commit introduces some basic code to track the TX mbuf ring use and then
(hopefully!) ensures that enough slots are free in said TX mbuf ring before it
enters the actual work loop.

A few notes:

* Similar logic needs to be introduced to check there are enough actual slots
  available in the xenbuf TX ring. There's some logic which is invoked earlier
  but it doesn't hard-check against the number of available ring slots.
  Its trivial to do; I'll do it in a subsequent commit.

* As I've now commented in the source, it is likely possible to deadlock the
  driver under certain conditions where the rings aren't receiving any changes
  (which I should enumerate) and thus Xen doesn't send any further software
  interrupts. I need to make sure that the timer(s) are running right and
  the queues are periodically kicked.

PR:		134926
2009-05-27 02:49:08 +00:00
Adrian Chadd
2d8fae9867 Do the invariant check before the mbuf is dereferenced. 2009-05-27 01:56:37 +00:00
Adrian Chadd
c099cafa14 Flesh out some inline documentation which hopefully reflect the intended
reality of these functions.
2009-05-27 01:54:26 +00:00
Adrian Chadd
0e6993e4a7 Add in some INVARIANT checks in the TX mbuf descriptor "freelist" management code.
Slot 0 must always remain "free" and be a pointer to the first free entry in the
mbuf descriptor list. It is thus an error to have code allocate or push slot 0
back into the list.
2009-05-27 01:45:23 +00:00
Adrian Chadd
3a5391225b The merge in r189699 reverted part of the work done in a previous commit
(r188036.)

Re-revert that change so the Xen networking functions again.
2009-05-18 04:56:37 +00:00
Doug Rabson
1267802438 Merge in support for Xen HVM on amd64 architecture. 2009-03-11 15:30:12 +00:00
Kip Macy
532700bd00 fix non-witness compile 2009-02-05 21:18:39 +00:00
Kip Macy
a392a2719c break out of loop if we run out of mbufs 2009-02-02 23:04:20 +00:00
Kip Macy
3a6d1fcf9c merge 186535, 186537, and 186538 from releng_7_xen
Log:
 - merge in latest xenbus from dfr's xenhvm
 - fix race condition in xs_read_reply by converting tsleep to mtx_sleep

Log:
 unmask evtchn in bind_{virq, ipi}_to_irq

Log:
 - remove code for handling case of not being able to sleep
 - eliminate tsleep - make sleeps atomic
2008-12-29 06:31:03 +00:00
Kip Macy
23dc562170 Integrate 185578 from dfr
Use newbus to managed devices
2008-12-04 07:59:05 +00:00
Doug Rabson
499062187b Don't call ether_ioctl() with locks held. Loop in xn_rxeof() until the backend
stops adding stuff to the ring otherwise we miss RX interrupts which kills
performance.
2008-11-30 12:21:46 +00:00
Kip Macy
920ba15bf9 Update xen/interface includes to the latest in mercurial
MFC after:	1 month
2008-09-26 05:29:39 +00:00
Kip Macy
646787d94f reflect header change in netfront
MFC after:	1 month
2008-09-25 07:02:00 +00:00
Kip Macy
83b92f6e47 For reasons that I have not delved in to Xen 3.2 netback now does header splitting
so packets > 128 bytes are now split in to multiple buffer. This fixes netfront
to handle multiple buffers per rx packet.

MFC after:	1 month
2008-08-21 02:40:26 +00:00
Kip Macy
6ae0e31bcc change netfront to match xen31_6
fix console locking
2008-08-20 09:47:49 +00:00
Kip Macy
980c717846 include vmparam.h for KERNBASE and fix typo 2008-08-20 09:11:58 +00:00
Kip Macy
7a5048f10c register netfront before xenbus does its probing
MFC after: 	1 month
2008-08-20 09:03:23 +00:00
Kip Macy
89e0f4d24c Import Xen paravirtual drivers.
MFC after:	2 weeks
2008-08-12 20:01:57 +00:00