This contains some new testcases in /usr/tests/...:
- .../lib/libc
- .../lib/libthr
- .../lib/msun
- .../sys/kern
Tested on: amd64, i386
MFC after: 1 month
drain timeout handling to historical freebsd behavior.
The primary reason for these changes is the need to have tty_drain() call
ttydevsw_busy() at some reasonable sub-second rate, to poll hardware that
doesn't signal an interrupt when the transmit shift register becomes empty
(which includes virtually all USB serial hardware). Such hardware hangs
in a ttyout wait, because it never gets an opportunity to trigger a wakeup
from the sleep in tty_drain() by calling ttydisc_getc() again, after
handing the last of the buffered data to the hardware.
While researching the history of changes to tty_drain() I stumbled across
some email describing the historical BSD behavior of tcdrain() and close()
on serial ports, and the ability of comcontrol(1) to control timeout
behavior. Using that and some advice from Bruce Evans as a guide, I've
put together these changes to implement the hardware polling and restore
the historical timeout behaviors...
- tty_drain() now calls ttydevsw_busy() in a loop at 10 Hz to accomodate
hardware that requires polling for busy state.
- The "new historical" behavior for draining during close(2) is retained:
the drain timeout is "1 second without making any progress". When the
1-second timeout expires, if the count of bytes remaining in the tty
layer buffer is smaller than last time, the timeout is extended for
another second. Unfortunately, the same logic cannot be extended all
the way down to the hardware, because the interface to that layer is a
simple busy/not-busy indication.
- Due to the previous point, an application that needs a guarantee that
all data has been transmitted must use TIOCDRAIN/tcdrain(3) before
calling close(2).
- The historical behavior of honoring the drainwait setting for TIOCDRAIN
(used by tcdrain(3)) is restored.
- The historical kern.drainwait sysctl to control the global default
drainwait time is restored, but is now named kern.tty_drainwait.
- The historical default drainwait timeout of 300 seconds is restored.
- Handling of TIOCGDRAINWAIT and TIOCSDRAINWAIT ioctls is restored
(this also makes the comcontrol(1) drainwait verb work again).
- Manpages are updated to document these behaviors.
Reviewed by: bde (prior version)
libstdc++ before gcc r244057 expected that libc provided
__cxa_thread_atexit_impl, and libstdc++ implemented
__cxa_thread_atexit, by forwarding the calls to _impl. Mentioned gcc
revision checks for __cxa_thread_atexit in libc and does not provide
the symbol from libstdc++ if found.
This change helps older gcc, in particular, all released versions
which implement thread_local, by consolidating the implementation into
libc. For that versions, if configured with the current libc, the
__cxa_thread_atexit is exported from libstdc++ as a trivial wrapper
around libc::__cxa_thread_atexit_impl.
The __cxa_thread_atexit implementation is put into separate source
file to allow for static linking with older libstdc++.a.
gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78968
Reported by: Hannes Hauswedell <h2+fbsdports@fsfe.org>
PR: 215709
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the mapping which might be accessed by other threads.
If a pointer to the /dev/hpet register page mapping was stored into
the hpet_dev_map, other threads might access the page at any time.
Never unmap it, instead, keep track of mappings for all hpet units in
smal array. Store pointer to the newly mapped registers page using
CAS, to detect parallel mappings.
It appeared relatively easy to demonstrate the problem by arranging
two threads which perform gettimeofday(2) concurently, first time in
the process address space, when HPET is used for timecounter.
PR: 215715
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Apple had them at the start but moving them to the end is better for
faster reading and fits better what is done in other FreeBSD headers.
MFC after: 5 days
This argument is not a bitmask of flags, but only accepts a single value.
Fail with EINVAL if an invalid value is passed to 'flag'. Rename the
'flags' argument to getmntinfo(3) to 'mode' as well to match.
This is a followup to r308088.
Reviewed by: kib
MFC after: 1 month
Adding %b support to vfprintf for parity with kernel space requires
more discussion/review.
In particular, many parties were concerned over introducing a
non-standard format qualifier to *printf(3) which didn't already
exist in other OSes, e.g. Linux, thus making code which used %b
harder to port to other operating systems.
Requested by: many
This 6 times gettimeofday performance, as measured by
tools/tools/syscall_timing
Reviewed by: kib
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8789
This is a direct port of the kernel %b format.
I'm unclear on if (more) non-portable printf extensions will be a
problem. I think it's desirable to have userspace formats include all
kernel formats, but there may be competing goals I'm not aware of.
Reviewed by: no one, unfortunately
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8426
These functions are supposed to return a value between [_2^31, 2^31).
This doesn't seem to work on 64-bit systems, where we return a value
between [0, 3^32). Patch up the function to use proper casts to int32_t.
While there, fix some other style bugs.
MFC after: 2 weeks
A specially crafted sockaddr_dl argument can trigger a static buffer overflow
in the libc library, with possibility to rewrite with arbitrary data following
static buffers that belong to other library functions.
Reviewed by: kib
Security: FreeBSD-SA-16:37.libc
Instead of failing with ENAMETOOLONG, which is swallowed by
pthread_set_name_np() anyway, truncate the given name to MAXCOMLEN+1
bytes. This is more likely what the user wants, and saves the
caller from truncating it before the call (which was the only
recourse).
Polish pthread_set_name_np(3) and add a .Xr to thr_set_name(2)
so the user might find the documentation for this behavior.
Reviewed by: jilles
MFC after: 3 days
Sponsored by: Dell EMC
This uses the same fix as r294894 did for the mlock test. The code from
that commit is moved into a common object file which PROGS supports
building first.
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8689
As of r234483, vnode deactivation causes non-VPO_NOSYNC pages to be
laundered. This behaviour has two problems:
1. Dirty VPO_NOSYNC pages must be laundered before the vnode can be
reclaimed, and this work may be unfairly deferred to the vnlru process
or an unrelated application when the system is under vnode pressure.
2. Deactivation of a vnode with dirty VPO_NOSYNC pages requires a scan of
the corresponding VM object's memq for non-VPO_NOSYNC dirty pages; if
the laundry thread needs to launder pages from an unreferenced such
vnode, it will reactivate and deactivate the vnode with each laundering,
potentially resulting in a large number of expensive scans.
Therefore, ensure that all dirty pages are laundered upon deactivation,
i.e., when all maps of the vnode are removed and all references are
released.
Reviewed by: alc, kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8641
We return [EMLINK] instead of [ELOOP] when trying to open a symlink with
O_NOFOLLOW, so that the original case of [ELOOP] can be distinguished. Code
like cmp -h and xz takes advantage of this.
PR: 214633
Reviewed by: kib, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8586
When wcstof() skipped initial space and then parsing failed, it set
endptr to the first non-space character. Fix it to correctly report
failure by setting endptr to the beginning of the input string.
The fix is from theraven@, who fixed this bug in wcstod() and
wcstold() in r227753.
While I'm here:
Move assignments out of declarations in wcstod() and wcstold().
This is against my personal preference, but it is our agreed style(9).
Set endptr correctly on malloc() failure in all three functions.
Remove an incorrect comment: This is pointer arithmetic,
so the code was not actually making that assumption.
wcstold() advanced the wcp pointer beyond leading whitespace
and then reset it back to the beginning of the string.
Do not reset it. This seems to have no functional effect,
since strtold_l() also skips leading whitespace. I'm making
the change to keep this function consistent with wcstof() and
wcstod(), and because the C11 spec prescribes the use of iswspace()
to skip leading space.
Reported by: libc++ unit test for std::stof(std::wstring)
MFC after: 8 days
Sponsored by: Dell EMC
do any speculations about readahead, and use exactly the amount of readahead
specified by user. E.g. setting SF_FLAGS(0, SF_USER_READAHEAD) will guarantee
that no readahead at all will be performed.
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
Now that the changes to the dirname(3) function had some time to settle,
let's go ahead and use the same approach for replacing basename(3) by a
simple implementation that modifies the input string, thereby making it
thread-safe and guaranteed to succeed.
Unlike dirname(3), this function already had a thread-safe variant
basename_r(3). This function had its own set of problems, like having an
upper bound on the pathname length. Keep this function around for
compatibility, but remove most references from the man page. Make the
man page more similar to that of dirname(3).
As the basename_r(3) function is only provided by FreeBSD (and Bionic),
depending on its use is even more implementation defined than assuming
that basename(3) is thread-safe.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D8382
We have locale files generated on EL machines (e.g. during cross-build
on amd64 host), but then we are using them on EB machines (e.g. MIPS64EB),
so proceed byte-swap if necessary.
All the libc tests passed successfully, including Russian collation.
Tested by: br@, Hongyan Xia <hx242@cam.ac.uk>
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D8281
Specifically, use .Ta instead of tabs to separate column entries. While
here fix a few other things:
- Use .Sy for all column headers (previously only the first column header
was bold)
- Use .Dv to markup constants used for MIB names.
- Use "1234" and "4321" for the byte order descriptions without
thousands separators.
- Mark up header files in the first table with .In.
MFC after: 2 weeks
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
Back in 2015 when I reimplemented these functions to use an AVL tree, I
was annoyed by the weakness of the typing of these functions. Both tree
nodes and keys are represented by 'void *', meaning that things like the
documentation for these functions are an absolute train wreck.
To make things worse, users of these functions need to cast the return
value of tfind()/tsearch() from 'void *' to 'type_of_key **' in order to
access the key. Technically speaking such casts violate aliasing rules.
I've observed actual breakages as a result of this by enabling features
like LTO.
I've filed a bug report at the Austin Group. Looking at the way the bug
got resolved, they made a pretty good step in the right direction. A new
type 'posix_tnode' has been added to correspond to tree nodes. It is
still defined as 'void' for source-level compatibility, but in the very
far future it could be replaced by a proper structure type containing a
key pointer.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8205
we don't have it when MK_SSP==no.
This fixes compilation on MIPS.
Reviewed by: imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D8212
The sysctl cannot fail. If it does fail on some FreeBSD derivative or
after some future change, just abort() so that the problem will be found
and fixed.
While abort() is not normally suitable for a library, it makes sense
here.
This is akin to r306636 for arc4random.
Reviewed by: ed
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8077
The setkey() and encrypt() functions are part of XSI, not the POSIX base
definitions. There is no strict requirement for us to provide these,
especially if we're only going to keep these around as undocumented
stubs. The same holds for des_setkey() and des_cipher().
Instead of providing functions that only generate warnings when linking,
simply disallow linking against them. The impact of this is relatively
low. It only causes two leaf ports to break. I'll see what I can do to
help out to get those fixed.
PR: 211626
The sysctl cannot fail. If it does fail on some FreeBSD derivative or
after some future change, just abort() so that the problem will be found
and fixed.
It's preferable to provide an arc4random() function that cannot fail and
cannot return poor quality random data. While abort() is not normally
suitable for a library, it makes sense here.
Reviewed by: ed, jonathan, markm
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8077
2) Implememt %u for GNU compatibility.
3) Don't forget to advance buf for %w/%u.
4) Fail with incomplete week (week 0) request and no such week in the
year.
5) Fix yday formula when Sunday requested and the week started from Monday.
6) Fail with impossible yday for incomplete week (week 0) and direct %w/%u
request.
7) Shift yday/wday to the first day of the year, if incomplete week
(week 0) requested and no %w/%u used.
MFC after: 7 days
have been added as some don't seem to be improvements over the libc C
implementation.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
it to lib/libc/tests/sys/Makefile [*]
Even though make -VPACKAGE and make -n install seem to do the right thing,
the effects are a bit different, depending on the build host.
MFC after: 1 week
Obtained from: HardenedBSD (af602f0db) [*]
Reported by: Oliver Pinter <oliver.pinter@hardenedbsd.org> [*]
Sponsored by: Dell EMC Isilon
It turns out that the path normalization that our brand new copy of
dirname(3) does is actually not allowed by the draft version of the
upcoming version of POSIX. It has to behave identically to the
dirname(1) utility.
This change replaces our new dirname(3) implementation by yet another
version that doesn't implement the path normalization logic; it merely
looks for the end of the directory name and overwrites that with a null
byte.
More details: See note #3370 at http://austingroupbugs.net/view.php?id=1073
PR: 212193
Reviewed by: emaste, jilles
Differential Revision: https://reviews.freebsd.org/D7790
needlessly
This is already being done by bsd.test.mk
The other subdirectory Makefiles were intentionally left alone
MFC after: 1 week
Sponsored by: Dell EMC Isilon
build can break when different source files create the same object
files (case-insensitivity speaking). This is the case for _Exit.c
and _exit.s. Compile _Exit.c as C99_Exit.c
Reviewed by: sjg@
MFC after: completion
Sponsored by: Bracket Computing
Differential Revision: https://reviews.freebsd.org/D7893
Previously the flag returned by cap_getmode was not described explicitly
in the man page.
Reviewed by: wblock
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7822
The initial value of NOASM is nearly the same in all cases and the
initial value of PSEUDO is the same in all cases so reduce duplication
(and hopefully, future merge conflicts) by machine independent defaults.
Also document the PSEUDO variable.
Reviewed by: jhb, kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D7820
when the first mb sequence is incomplete and there are not enougn chars in
the read buffer. ws[-1] may lead to memory faults or false results, in
case the memory here contains '\n'.
2) Fix EOF checking I mess in my previos r305406 commit.
MFC after: 3 days
sequence near EOF), so we can't just check for
(wc == WEOF && !__sfeof(fp)) and must relay on __sferror(fp) with
__SERR clearing/restoring.
MFC after: 7 days
In existing implementations including FreeBSD, there is no reason to use
readdir_r() in the common case where potentially multiple threads each list
their own directory. Code using readdir() is simpler.
What's more, lthough readdir_r() can safely be used on FreeBSD because
NAME_MAX is forced to 255, it cannot be used safely on systems where
{NAME_MAX} is not fixed. As a concrete example, FAT/NTFS filenames can be up
to 255 UTF-16 code units long, which can be up to 765 UTF-8 bytes.
Deprecating readdir_r() in POSIX has been proposed in
http://www.austingroupbugs.net/view.php?id=696
and glibc wants to deprecate it as well.
Reviewed by: ed, wblock
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D7678
Besides removing hand-translation to assembler, this also adds missing
wrappers for arm64 and risc-v.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D7694
In particular, preserve syscall arguments on stack, since callee is
not required to preserve arg-passing registers. Align stack.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Since ptrace(2) syscall can return -1 for non-error situations, libc
wrappers set errno to 0 before performing the syscall, as the service
to the caller. On both i386 and amd64, the errno symbol was directly
referenced, which only works correctly in single-threaded process.
Change assembler wrappers for ptrace(2) to get current thread errno
location by calling __error(). Allow __error interposing, as
currently allowed in cerror().
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
are equal. Unfortunately, RFC 3484 requires that otherwise equal objects
remain in the order supplied by the DNS server. The present code attempts
to deal with this by returning -1 for objects that are equal (i.e.,
returns that the first parameter is less then the second parameter).
Unfortunately, the qsort API does not state that the first parameter
passed in is in any particular position in the list.
PR: 212122
Submitted by: Herbie.Robinson@stratus.com
MFC after: 3 days
As the xinstall(8) utility had to be patched up to work with the POSIXly
correct basename()/dirname() prototypes, we make it pretty hard to build
previous versions of FreeBSD on HEAD. xinstall(8) is part of the
bootstrap tools.
Add some logic to <libgen.h> to automatically detect bad calls to
dirname() based on the type of the argument. If the argument is of type
'const char *', we simply fall back to calling into dirname@FBSD_1.0
directly.
I'll also give basename() similar treatment when importing the
thread-safe version of that function.
Tested by: bdrewery, madpilot (thanks!)
i.e. partial line, but set __SERR and errno in the same time, which
is inconsistent.
Now both OpenBSD and NetBSD return failure, i.e. no line and set error
indicators for such case, so make our fgetln() and fgetwln()
(as its wide version) compatible with the rest of *BSD.
PR: 212033
MFC after: 7 days
functions.
__SERR is for user and the rest of stdio code do not check it
for error sensing internally, only set it.
In vf(w)printf.c here it is more easy to save __SERR, clear and restore it.
return partial line on any errors. See the comment in fgetln.c.
Add corresponding comment to fgetwln() too.
2) Rewrite r304607 case 1).
3) Remove "Fast path" from __fgetwc_mbs() since it can't detect encoding
errors and ignores them all.
PR: 212033
MFC after: 7 days
1) Don't forget to set __SERR on __slbexpand() error.
2) Check for __fgetwc() errors using errno. Don't check for __SERR
as PR suggested, it user-visible flag which can stick from previous
functions and stdio code don't check it for this purpose.
PR: 212033
MFC after: 3 days
- Avoid double use of "request" in a single sentence. Instead, describe
aio_sigevent as being used to request notification of the associated
operation's completion. This matches the language used to describe
aio_sigevent in aio(4).
- Simplify the prohibition on modifying buffers while requests are in
flight.
- Fix case mismatch.
- Drop note about not using stack variables. C programmers should be able
to figure out if a stack variable is safe based on the later warning
about the life cycle requirements of control blocks.
- Remove prohibition on modifying the I/O buffer for aio_fsync() since
it does not use an I/O buffer. For aio_mlock(), prohibit modifications
to the mapping (e.g. due to mprotect, munmap, mmap, etc.) but do not
prohibit modifications to the memory backing the buffer (stores into
the pages backing the buffer).
Requested by: wblock (1,2), kib (4)
Reviewed by: kib, rpokala, wblock
MFC after: 3 days
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7462
Right now, userspace (fast) gettimeofday(2) on x86 only works for
RDTSC. For older machines, like Core2, where RDTSC is not C2/C3
invariant, and which fall to HPET hardware, this means that the call
has both the penalty of the syscall and of the uncached hw behind the
QPI or PCIe connection to the sought bridge. Nothing can me done
against the access latency, but the syscall overhead can be removed.
System already provides mappable /dev/hpetX devices, which gives
straight access to the HPET registers page.
Add yet another algorithm to the x86 'vdso' timehands. Libc is updated
to handle both RDTSC and HPET. For HPET, the index of the hpet device
to mmap is passed from kernel to userspace, index might be changed and
libc invalidates its mapping as needed.
Remove cpu_fill_vdso_timehands() KPI, instead require that
timecounters which can be used from userspace, to provide
tc_fill_vdso_timehands{,32}() methods. Merge i386 and amd64
libc/<arch>/sys/__vdso_gettc.c into one source file in the new
libc/x86/sys location. __vdso_gettc() internal interface is changed
to move timecounter algorithm detection into the MD code.
Measurements show that RDTSC even with the syscall overhead is faster
than userspace HPET access. But still, userspace HPET is three-four
times faster than syscall HPET on several Core2 and SandyBridge
machines.
Tested by: Howard Su <howard0su@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D7473
The syscall is a trivial wrapper around new VOP_FDATASYNC(), sharing
code with fsync(2). For all filesystems, this commit provides the
implementation which delegates the work of VOP_FDATASYNC() to
VOP_FSYNC(). This is functionally correct but not efficient.
This is not yet POSIX-compliant implementation, because it does not
ensure that queued AIO requests are completed before returning.
Reviewed by: mckusick
Discussed with: avg (ZFS), jhb (AIO part)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7471
Depending on the address family and ai_flags containing AI_V4MAPPED,
it might not do a proper DNS lookup on the provided DNS address
Convert some `ai` boolean true/false checks to NULL/non-NULL while here.
MFC after: 1 week
PR: 211790
Reported by: Herbie.Robinson@stratus.com
Sponsored by: EMC / Isilon Storage Division
On particular slow networks, it can (on average) take longer to
resolve hosts to IP* addresses. 20 minutes seemed reasonable for
my work network
This will be solved in a more meaningful way (if possible) using
concurrency in the near future
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
- Some of the lib/libc and lib/thr tests fail
- lib/msun/exp_test:exp2_values now passes with clang 3.8.0
The Makefiles in contrib/netbsd-tests were pruned as they have no value
Sponsored by: EMC / Isilon Storage Division
Now that we've updated the prototypes of the basename(3) and dirname(3)
functions to conform to POSIX, let's go ahead and reimplement dirname(3)
in such a way that it's thread-safe, but also guaranteed to succeed. C
libraries like glibc, musl and the one that's part of Solaris already
follow such an approach.
Move the existing implementation to another source file,
freebsd11_dirname.c to keep existing users of the API that pass in a
constant string happy, using symbol versioning.
Put a new version of the function in dirname.c, obtained from CloudABI's
C library. This version scans through the pathname string from left to
right, normalizing it, while discarding the last pathname component.
Reviewed by: emaste, jilles
Differential Revision: https://reviews.freebsd.org/D7355
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
Detected with devel/coccinelle following a hint from DragonFlyBSD.
MFC after: 1 month
This is the backing feature to implement C++11 thread storage duration
specified by the thread_local keyword. A destructor for given
thread-local object is registered to be executed at the thread
termination time using __cxa_thread_atexit(). Libc calls the
__cxa_thread_calls_dtors() during exit(3), before finalizers and
atexit functions, and libthr calls the function at the thread
termination time, after the stack unwinding and thread-specific key
destruction.
There are several uncertainties in the API which lacks a formal
specification. Among them:
- is it allowed to register destructors during destructing;
we allow, but limiting the nesting level. If too many iterations
detected, a diagnostic is issued to stderr and thread forcibly
terminates for now.
- how to handle destructors which belong to an unloading dso;
for now, we ignore destructor calls for such entries, and
issue a diagnostic. Linux does prevent dso unload until all
threads with destructors from the dso terminated.
It is supposed that the diagnostics allow to detect real-world
applications relying on the above details and possibly adjust
our implementation. Right now the choices were to provide the slim
API (but that rarely stands the practice test).
Tests are added to check generic functionality and to specify some of
the above implementation choices.
Submitted by: Mahdi Mokhtari <mokhi64_gmail.com>
Reviewed by: theraven
Discussed with: dim (detection of -std=c++11 supoort for tests)
Sponsored by: The FreeBSD Foundation (my involvement)
MFC after: 2 weeks
Differential revisions: https://reviews.freebsd.org/D7224,
https://reviews.freebsd.org/D7427
two sepatate functions to make glob(3) code less obscure and more simple.
There is no needs to make them inline since it is error path which supposed
to not happes often.
Our mprotect() function seems to take a "const void *" address to the
pages whose permissions need to be adjusted. POSIX uses "void *". Simply
stick to the POSIX one to prevent us from writing unportable code.
PR: 211423 (exp-run)
Tested by: antoine@ (Thanks!)
Just like with freelocale(3), I haven't been able to find any piece of
code that actually makes use of this function's return value, both in
base and in ports. The reason for this is that FreeBSD seems to be the
only operating system to have such a prototype. This is why I'm deciding
to not use symbol versioning for this.
It does seem that the pw(8) utility depends on the function's typing and
already had a switch in place to toggle between the FreeBSD and POSIX
variant of this function. Clean this up by always expecting the POSIX
variant.
There is also a single port that has a couple of local declarations of
setgrent(3) that need to be patched up. This is in the process of being
fixed.
PR: 211394 (exp-run)
to 0. Breaking this rule in 2001 NetBSD hack was imported which attempts
to workaround very limited glob() return codes amount. Use POSIX-compatible
workaround now with E2BIG which can't comes from other functions used
instead of prohibited 0.
When adding getline(3) and dprintf(3) into libc, those guards were added
to prevent breaking too many ports.
7 years later the ports tree have been fixed, it is time to remove this
FreeBSDism
While here remove the extra parenthesis surrounding dprintf(3)
Our version of this function currently returns an integer indicating
failure or success, whereas POSIX specifies that this function has no
return value. It returns void. Patch up the header, sources and man page
to use the right type. While there, use the opportunity to simplify the
body of this function.
Theoretically speaking, this change breaks the ABI of this function.
That said, I have yet to find any code that makes use of freelocale()'s
return value. I couldn't find any of it in the base system, nor did an
exp-run reveal any breakage caused by this change.
PR: 211394 (exp-run)
Update the existing manual pages for basename(3) and dirname(3) to
mention that in future versions of FreeBSD, these functions will no
longer use internal buffers for storing the results.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D7356
POSIX allows these functions to be implemented in a way that the
resulting string is stored in the input buffer. Though some may find
this annoying, this has the advantage that it makes it possible to
implement this function in a thread-safe way. It also means that they
can be implemented in a way that they work for paths of arbitrary
length, as the output string of these functions is never longer than
max(1, len(input)).
Portable code already needs to be written with this in mind, so in my
opinion it makes very little sense to allow the existing behaviour.
Prevent the base system from falling back to this by switching over to
POSIX prototypes.
I'm not going to bump the __FreeBSD_version for this. The reason is that
it's possible to account for this change in a portable way, without
depending on a specific version of FreeBSD. An exp-run was done some
time ago. As far as I know, all regressions as a result of this have
already been fixed.
I'll give this change some time to settle. In the long run I want to
replace our copies by ones that are thread-safe and don't depend on
PATH_MAX/MAXPATHLEN.
It looks like the msgrcv() system call is already written in such a way
that the size is internally computed as a size_t and written into all of
td_retval[0]. This means that it is effectively already returning
ssize_t. It's just that the userspace prototype doesn't match up.
POSIX also declares NI_NUMERICSCOPE, which makes getnameinfo() return a
numerical scope identifier. The interesting thing is that support for
this is already present in code, but #ifdef disabled. Expose this
functionality by placing a definition for it in <netdb.h>.
While there, remove references to NI_WITHSCOPEID, as that got removed 11
years ago.
POSIX requires that these functions have an unsigned int for their first
argument; not an unsigned long.
My reasoning is that we can safely change these functions without
breaking the ABI. As far as I know, our supported architectures either
use registers for passing function arguments that are at least as big as
long (e.g., amd64), or int and long are of the same size (e.g., i386).
Reviewed by: ache
Differential Revision: https://reviews.freebsd.org/D6644
case it fully constructed, but for half-constructed too, so have no
other choice to pass original pattern from glob() down to globextend()
instead of attempt to reconstruct I implement previously.
2) Instead of copy&paste the same big enough code, make function for it:
globfinal().
The asynchronous I/O changes made previously result in different
behavior out of the box. Previously all AIO requests failed with
ENOSYS / SIGSYS unless aio.ko was explicitly loaded. Now, some AIO
requests complete and others ("unsafe" requests) fail with EOPNOTSUPP.
Reword the introductory paragraph in aio(4) to add a general
description of AIO before describing the vfs.aio.enable_unsafe sysctl.
Remove the ENOSYS error description from aio_fsync(2), aio_read(2),
and aio_write(2) and replace it with a description of EOPNOTSUPP.
Remove the ENOSYS error description from aio_mlock(2).
Log a message to the system log the first time a process requests an
"unsafe" AIO request that fails with EOPNOTSUPP. This is modeled on
the log message used for processes using the legacy pty devices.
Reviewed by: kib (earlier version)
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7151
globexp1() recursive calls, but glob0() was not supposed to be called
repeatedly in the original code. It finalize results by possible adding
original pattern for no match case, may return GLOB_NOMATCH error and
by sorting all things. Original pattern adding or GLOB_NOMATCH error
can happens each time glob0() called repeatedly, and sorting happens
for one item only, all things are never sorted. Second, f.e. "a{a"
pattern does not match "a{a" file but match "a" file instead
(just one example, there are many). Third, some errors (f.e. for limits
or overflow) can be ignored by GLOB_BRACE code because it forces return (0).
Add non-finalizing flag to glob0() and make globexp0() wrapper around
recursively called globexp1() to finalize things like glob0() does.
Reorganize braces code to work correctly.
2) Don't allow MB_CUR_MAX * strlen overallocation hits GLOB_LIMIT_STRING
(ARG_MAX) limit, use final string length, not malloced space for it.
3) Revive DEBUG-ifdefed section.
unmodified, if no matches found. But our original code strips all '\'
returning it. Rewrite the code to allow to reconstruct exact the
original pattern with backslashes for this case.
2) Prevent to use truncated pattern if MAXPATHLEN exceeded, return
GLOB_NOMATCH instead.
3) Fix few end loop conditions filling Char arrays with mbrtowc(),
MB_CUR_MAX is unneeded in two places and condition is less by one
in other place.
4) Prevent to use truncated filenames match if MAXPATHLEN exceeded,
skip such directory entries.
5) Don't end *pathend with L'/' in glob3() if limit is reached, this
change will be not visible since error is returned.
6) If error happens in (*readdirfunc)(), do the same GLOB_ABORTED
processing as for g_opendir() as POSIX requires.
in any case and needed for further processing. For ~ expansion too.
2) Don't terminate *pathend with / when GLOB_LIMIT_STAT is reached, it will
be not visible outside in any case since error is returned.
3) Cosmetic: change if expression to better reflect its semantic.
since whole conversion needs a room for (len >= MB_CUR_MAX). It is no
difference when MB_CUR_MAX == 1, but for multi-byte locales last few chars
('\0' and before) may need just one byte, and the rest of MB_CUR_MAX - 1
space becomes unavailable in the MAXPATHLEN-sized buffer, which cause
conversion error on near MAXPATHLEN long pathes.
Increase g_Ctoc() conversion buffers to MB_LEN_MAX - 1.
as pattern meta chars.
2) GLOB_ERR and gl_errfunc are supposed to work only for real directories
per POSIX, so don't act on missing or plain files, for ENOENT or ENOTDIR
(as TODO in the code suggested).
3) Remove the hack in the manpage describing how to skip ENOENT and ENOTDIR
in gl_errfunc, it is unneeded now.
4) Set errno to ENAMETOOLONG if g_Ctoc() expansion fails in g_opendir(),
as in other places in the code which are wrappers around system functions.
open/read errors and with GLOB_ERR and gl_errfunc processing), so we can't
blindly return it on any MAXPATHLEN overflow. Even our manpage disagrees
with such GLOB_ABORTED usage. Use GLOB_NOSPACE for that now with errno is
set to 0 as for limits.
2) Return GLOB_NOSPACE when valid ~ expansion can't happens due to
MAXPATHLEN overflow too.
3) POSIX (and our manpage) says, if GLOB_ERR is set, GLOB_ABORTED should
be returned immediatelly, without using gl_errfunc. Implement it now.
First, PL_FLAG_FORKED events now also set a PL_FLAG_VFORKED flag when
the new child was created via vfork() rather than fork(). Second, a
new PL_FLAG_VFORK_DONE event can now be enabled via the PTRACE_VFORK
event mask. This new stop is reported after the vfork parent resumes
due to the child calling exit or exec. Debuggers can use this stop to
reinsert breakpoints in the vfork parent process before it resumes.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7045
them down. This hack still remains:
* 2. Illegal byte sequences in filenames are handled by treating them as
* single-byte characters with a values of such bytes of the sequence
* cast to wchar_t.
2) Reword the comment in the hack above to reflect implementation.
3) Protect signed wchar_t from sign extension when a signed char is assigned
to it in the hack above.
3) Corresponding backward hack in g_Ctoc() was not implemented, so all
pathes with illegal byte sequences are skipped as result, implement it now.
4) globtilde() forget to convert expanded user home dir from multibyte to
wchar.
5) Protect globtilde() from long expansion truncation.
6) Results was not sorted according to collate as POSIX requires.
when importing collation support from Dragonfly/Illumos amdmi3@ tested the
collation branch and reported an issue with Russian collation. John Marino fixed
the issue in Dragonfly and I merged it back to FreeBSD.
Now that Illumos is working on merging our fixes they (Lauri Tirkkonen) found
issues with the commit that fixes the russian collation in UTF-8 that resulted
in a crash with strxfrm(3) and the ISO-8859-5 locale (fixed in FreeBSD r302916).
This small test was written to ensure we do not bring back the old issue with
russian collation while fixing the other issue.
ptrace() now stores a mask of optional events in p_ptevents. Currently
this mask is a single integer, but it can be expanded into an array of
integers in the future.
Two new ptrace requests can be used to manipulate the event mask:
PT_GET_EVENT_MASK fetches the current event mask and PT_SET_EVENT_MASK
sets the current event mask.
The current set of events include:
- PTRACE_EXEC: trace calls to execve().
- PTRACE_SCE: trace system call entries.
- PTRACE_SCX: trace syscam call exits.
- PTRACE_FORK: trace forks and auto-attach to new child processes.
- PTRACE_LWP: trace LWP events.
The S_PT_SCX and S_PT_SCE events in the procfs p_stops flags have
been replaced by PTRACE_SCE and PTRACE_SCX. PTRACE_FORK replaces
P_FOLLOW_FORK and PTRACE_LWP replaces P2_LWP_EVENTS.
The PT_FOLLOW_FORK and PT_LWP_EVENTS ptrace requests remain for
compatibility but now simply toggle corresponding flags in the
event mask.
While here, document that PT_SYSCALL, PT_TO_SCE, and PT_TO_SCX both
modify the event mask and continue the traced process.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7044
- Add a sigevent(3) manpage to give a general overview of the sigevent
structure and the available notification mechanisms.
- Document that AIO requests contain a nested sigevent structure that can
be used to request completion notification.
- Expand the sigevent details in other manuals to note details such as
the extra values stored in a queued signal's information or in a posted
kevent.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7122
locale (which cause core dump) by removing whole 'table' argument
by which it passed.
2) Restore __collate_range_cmp() in __sccl().
3) Collating [a-z] range in regcomp() only for single bytes locales
(we can't do it now for other ones). In previous state only first 256
wchars are considered and all others are just silently dropped from the
range.
Instead of changing whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and concentrace on fixing bugs in what we have now,
too many small obstacles instead, counting ports.
Only first 256 wide chars are considered currently, all other are just
dropped from the range. Proper implementation require reverse tables
database lookup, since objects are really big as max UTF-8 (1114112
code points), so just the same scanning as it was for 256 chars will
slow things down.
POSIX does not require collation for [a-z] type ranges and does not
prohibit it for non-POSIX locales. POSIX require collation for ranges
only for POSIX (or C) locale which is equal to ASCII and binary for
other chars, so we already have it.
No other *BSD implements collation for [a-z] type ranges.
Restore ABI compatibility with unused now __collate_range_cmp() which
is visible from outside (will be removed later).
Since r302216, thread suspension causes advisory file locks to restart
(instead of continuing to wait) and for a long time SA_RESTART has
affected advisory file locks. These are both not compliant to POSIX.1.
To clarify that restarting means something, add a paragraph about fair
queuing. Note that the network lock manager does not implement fair
queuing.
Reviewed by: kib (previous version)
Approved by: re (gjb)
This fixes the build when DESTDIR may be blank or not yet populated.
It also fixes reproducibility.
Submitted by: brooks
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D6455
(WITH_SYSTEM_COMPILER: Enable by default) and it's prerequisite: r300354,
caused i386 builds to fail when cross-built on an amd64 host.
Reviewed by: bdrewery, delphij, gjb
Approved by: re (gjb)
value.
This eliminates the need for machine dependant assembly wrappers for
pipe(2).
It also make passing an invalid address to pipe(2) return EFAULT rather
than triggering a segfault. Document this behavior (which was already
true for pipe2(2), but undocumented).
Reviewed by: andrew
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D6815
The fix to the __collate_range_cmp() ABI breakage missed some replacements
in libc's vfscanf(). Replace them with __wcollate_range_cmp() which
does what is expected.
This was breaking applications like xterm and pidgin when using wide
characters.
Reported by: Vitalij Satanivskij
Approved by: re
xdr_rpcproc, xdr_rpcprog and xdr_rpcvers were broken in older
versions of FreeBSD but fixed in r296394. Give them some use
hoping they help make the code somewhat more readable.
Setting time by seconds or microseconds may cause unexpected effects
especially if sysctl vfs.timestamp_precision=3 (not default).
Calling the obsolete functions with NULL timestamps is acceptable.
xdr_rpcprog and xdr_rpcvers were broken in older versions of FreeBSD
but were fixed in r296394. Give them some use hoping they help make
the code somewhat more readable.
