Commit Graph

324 Commits

Author SHA1 Message Date
Hartmut Brandt
591f4054cb This is a driver for the physical layer chips used in ATM interfaces.
It currently supports the PMC Sierra Lite, Ultra and 622 chips and
the IDT 77105. The driver handles media options and state in a consistent
manner for ATM drivers. The next commit to the midway driver will make
it use utopia.
2003-06-12 14:28:32 +00:00
Poul-Henning Kamp
68bf8b56da remove old CCD module 2003-06-09 21:48:12 +00:00
Poul-Henning Kamp
5d9bef6473 Add GEOM module compilation shims. 2003-05-31 18:36:41 +00:00
Yoshihiro Takahashi
3e4e484918 Move the ips driver from ${MACHINE_ARCH} == "i386" to ${MACHINE} == "i386".
Approved by:	re (scottl)
2003-05-13 11:26:08 +00:00
Scott Long
3bd9d6f570 Hook up the ips module 2003-05-11 06:40:09 +00:00
Shunsuke Akiyama
11e04b0528 Add RealTek RTL8150 USB to fast Ethernet controller driver.
This driver now supports the Melco LUA-KTX and the GREEN HOUSE
GH-USB100B.

Reviewed by:	imp
MFC after:	2 weeks
2003-05-03 10:16:56 +00:00
Hartmut Brandt
33cfde03bc Convert the midway driver to use busdma. Except for this conversion the
following changes have been done:

- stylify. The original code was too hard to read.
- get rid of a number of compilation options (Adaptec-only, Eni-only, no-DMA).
- more debugging features.
- locking. This is not correct yet in the absence of interface layer locking,
  but is correct enough to not to cause lock order reversals.
- remove RAW mode. There are no users of this in the tree and I doubt that
  there are any.
- remove NetBSD compatibility code. There was no way to keep NetBSD non-busdma
  and FreeBSD busdma code together.
- if_en now buildable as a module.

This has been actively tested on sparc64 and i386 with ENI server and
client cards and an Adaptec card (thanks to kjc).

Reviewed by:	mdodd, arr
2003-04-25 16:14:03 +00:00
Bill Paul
87b4a25958 Add device driver support for the ASIX Electronics AX88172 USB 2.0
ethernet controller. The driver has been tested with the LinkSys
USB200M adapter. I know for a fact that there are other devices out
there with this chip but don't have all the USB vendor/device IDs.

Note: I'm not sure if this will force the driver to end up in the
install kernel image or not. Special magic needs to be done to exclude
it to keep the boot floppies from bloating again, someone please
advise.
2003-04-20 19:05:33 +00:00
Max Khon
7d0de413cb Driver for Granch SBNI16 SHDSL modem
Submitted by:	Denis I. Timofeev <timofeev@granch.ru>
MFC after:	1 week
2003-04-13 06:27:13 +00:00
Yoshihiro Takahashi
ba32bfe24e The dpt, ex and idt modules are for i386 only. 2003-04-13 01:32:03 +00:00
Matthew N. Dodd
991aa7bf9a Add 'idt' driver to module build. 2003-03-29 15:56:13 +00:00
Matthew N. Dodd
56376071e3 Add module infrastructure for 'dpt' driver. 2003-03-29 15:47:13 +00:00
Matthew N. Dodd
79ac92f83c Add module infrastructure for 'if_ex'. 2003-03-29 15:41:44 +00:00
Matthew N. Dodd
81d9009a65 Add module infrastructure for 'vpd' and 'smbios' and move 'smbios'
to new home.
2003-03-29 15:20:45 +00:00
Matthew N. Dodd
187e120cbe Add module infrastructure for elink. 2003-03-29 13:42:20 +00:00
Matthew N. Dodd
dd4cb1b8b8 Add module infrastructure for if_ie. 2003-03-29 13:40:41 +00:00
Matthew N. Dodd
a71a307383 Retire 'atspeaker' and 'pcspeaker'. We'll use 'speaker' which
is the same as the config device directive.

Reminded by:	 Takahashi Yoshihiro <nyan@jp.FreeBSD.org>
2003-03-29 09:59:49 +00:00
Ruslan Ermilov
99bca5069e Simplify the assignment statement. 2003-03-12 14:32:46 +00:00
Yoshihiro Takahashi
484be8eac1 Build the drm module also on pc98. 2003-03-09 10:12:58 +00:00
Robert Watson
03d031626d A cute yet small MAC policy that provides a simple ACL mechanism to
permit users and groups to bind ports for TCP or UDP, and is intended
to be combined with the recently committed support for
net.inet.ip.portrange.reservedhigh.  The policy is twiddled using
sysctl(8).  To use this module, you will need to compile in MAC
support, and probably set reservedhigh to 0, then twiddle
security.mac.portacl.rules to set things as desired.  This policy
module only restricts ports explicitly bound using bind(), not
implicitly bound ports where the port number is selected by the
IP stack.  It appears to work properly in my local configuration,
but needs more broad testing.

A sample policy might be:

  # sysctl security.mac.portacl.rules="uid:425:tcp:80,uid:425:tcp:79"

This permits uid 425 to bind TCP sockets to ports 79 and 80.  Currently
no distinction is made for incoming vs. outgoing ports with TCP,
although that would probably be easy to add.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-03-02 23:01:42 +00:00
Ruslan Ermilov
e4de92ce2b Hook up the if_my module to the build. 2003-02-27 14:49:56 +00:00
Tim J. Robbins
ef9e45dd01 Build the ncp and nwfs modules again, but only on i386 for now. 2003-02-27 11:31:08 +00:00
Eric Anholt
05d1e23aa7 Split the arch-specific AGP files into the appropriate files.* and do the same
for the agp module, and add agp to the list of modules to compile for alpha.
Add an alpha_mb() to agp_flush_cache for alpha -- it's not correct but may
improve the situation, and it's what linux and NetBSD do.
2003-02-14 06:33:52 +00:00
Peter Wemm
f801952a0b We only provide agp drivers for the intel chipsets, move the agp
subdir to the i386-only section.
2003-02-13 21:13:10 +00:00
Yoshihiro Takahashi
83536948ae Add CanBe power management controller support.
Submitted by:	KIYOHARA Takashi <kiyohara@kk.iij4u.or.jp>
2003-02-03 14:46:26 +00:00
Jake Burkholder
4875819c6e Run kldxref on sparc64, it works now. 2003-01-21 05:52:48 +00:00
Matthew N. Dodd
7534ac7ab7 A driver for the System Management Application Program
Interface (SMAPI) BIOS, which is present on some IBM
Thinkpad models (560, 600, 770 to name a few.)

The SMAPI BIOS provides access to System Information,
System Configuration, and Power Management.
2003-01-17 08:10:18 +00:00
Sam Leffler
0ac19bd5dc hookup wlan and rcv4 modules to the build
Reviewed by:	imp
2003-01-15 20:06:38 +00:00
David E. O'Brien
73badb2452 Build gem(4) on powerpc also. 2003-01-09 16:37:37 +00:00
David E. O'Brien
d16723e8e7 Moved if_hme to hme.
(I need a score card to keep track of the /sys layout fights)
2003-01-09 16:32:12 +00:00
Thomas Moestl
28d187c626 Build a gem module, for sparc64 only for now. 2003-01-08 20:40:29 +00:00
David E. O'Brien
b1c519de65 Add an hme(4) module.
PR:		46871
Submitted by:	Hartmut Brandt <brandt@fokus.gmd.de>
2003-01-08 18:45:04 +00:00
Jake Burkholder
f2de139378 Don't run kldxref when installing modules on sparc64. kldxref and the whole
module dependency system rely on linker behaviour that is machine dependent
and not part of the elf spec, and only work by accident on other platforms.

Approved by:	re
2002-12-13 00:32:29 +00:00
Robert Watson
f7883a793c Correct alphabetization of awi entry.
Inane act of:	re
Spotted by:	bde
2002-12-08 17:59:44 +00:00
Robert Watson
e6f88402ff Move the awi module build dependency into the MACHINE_ARCH=i386 entry. 2002-12-08 03:55:35 +00:00
Robert Watson
3358dbd039 Hook up the awi module for build on i386 and pc98, which appear to be
the supported platforms.  We build it into GENERIC, and it is currently
listed on the supported module list for drivers.conf on i386, which
breaks the release build.  This may fix the release build for RC1 on
i386.

Conspiracy of:	re
2002-12-07 14:06:56 +00:00
Robert Watson
c3a04e1ea4 Unhook the old LOMAC module, now replaced with mac_lomac.
Approved by:	re (jhb)
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-12-03 15:12:36 +00:00
Robert Watson
fe5f892d58 Unhook LOMAC kernel module since the functionality is now provided by
the smaller, cleaner, less bit-rotted mac_lomac module.

Approved by:	re
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-11-26 17:53:27 +00:00
Robert Watson
5773cccf19 Hook up the mac_lomac module build.
Approved by:	re
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-11-26 17:35:44 +00:00
Scott Long
147e2e207e Hook the RAIDFrame module up to the build
Approved by:	re
2002-11-21 14:52:20 +00:00
John Baldwin
f6af4ff6cb Make 3dfx i386-only. The memrange API it uses may be defined in an MI
header, but it is only implemented on i386.
2002-11-08 20:04:38 +00:00
John Baldwin
787f149830 Move rc(4) over to MI notes and enable it as a MI module. 2002-11-08 19:34:26 +00:00
John Baldwin
7d2ba89bbf Move firewire back to being MI. 2002-11-07 16:19:43 +00:00
John Baldwin
01c8945ca3 Create a MACHINE_ARCH == i386 section that first lists modules common
to both i386 and pc98 and then uses MACHINE subsections to list modules
specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
John Baldwin
246d578cba lnc(4) uses kvtop() and is thus i386-only for now. 2002-11-06 22:56:57 +00:00
John Baldwin
c8341b3e2d Make firewire i386-only for now. It doesn't quite handle machines with
64-bit address spaces yet.  Pointy hat to myself for sticking it in the MI
NOTES file to begin with.
2002-11-06 22:30:33 +00:00
John Baldwin
b76c5a11e5 ed(4) uses kvtop() and is thus i386-only. It has several other warnings
related to sizeof(int) != sizeof(void *), but kvtop() is much harder to
fix.

Approved by:	imp
2002-11-06 22:03:53 +00:00
Scott Long
fb404d6fcf Hook the aic7xxx modules up. This requires some extra care since aicasm
is a compiler tool and needs to be compiled by the host compiler.  I've
tested this in i386->sparc cross-build, 4.7->current upgrade, normal
buildkernel target, and normal /sys/i386/compile/GENERIC configurations.

Submitted by:	ru
2002-11-03 23:48:14 +00:00
John Baldwin
97af632bcb Add an isp(4) module. sbus support is only compiled in on sparc64.
pci support is always compiled in.
2002-10-31 19:50:18 +00:00
John Baldwin
bc96e1c7cf Add a module for mpt(4). 2002-10-31 19:39:23 +00:00