Commit Graph

262 Commits

Author SHA1 Message Date
Konstantin Belousov
153ac44cf6 Count number of threads that enter and leave dynamically registered
syscalls. On the dynamic syscall deregistration, wait until all
threads leave the syscall code. This somewhat increases the safety
of the loadable modules unloading.

Reviewed by:	jhb
Tested by:	pho
MFC after:	1 month
2010-06-28 18:06:46 +00:00
Ed Schouten
790f66db55 Remove unused LIBCOMPAT keyword from syscalls.master. 2010-02-08 10:02:01 +00:00
Konstantin Belousov
066d836b02 Current pselect(3) is implemented in usermode and thus vulnerable to
well-known race condition, which elimination was the reason for the
function appearance in first place. If sigmask supplied as argument to
pselect() enables a signal, the signal might be delivered before thread
called select(2), causing lost wakeup. Reimplement pselect() in kernel,
making change of sigmask and sleep atomic.

Since signal shall be delivered to the usermode, but sigmask restored,
set TDP_OLDMASK and save old mask in td_oldsigmask. The TDP_OLDMASK
should be cleared by ast() in case signal was not gelivered during
syscall execution.

Reviewed by:	davidxu
Tested by:	pho
MFC after:	1 month
2009-10-27 10:55:34 +00:00
Robert Watson
72c35fc69c Reserve system call numbers for Capsicum security framework capabilities,
capability mode, and process descriptors: cap_new, cap_getrights, cap_enter,
cap_getmode, pdfork, pdkill, pdgetpid, and pdwait.

Obtained from:	TrustedBSD Project
Sponsored by:	Google
MFC after:	3 weeks
2009-09-30 08:46:01 +00:00
Edward Tomasz Napierala
c38898116a There is an optimization in chmod(1), that makes it not to call chmod(2)
if the new file mode is the same as it was before; however, this
optimization must be disabled for filesystems that support NFSv4 ACLs.
Chmod uses pathconf(2) to determine whether this is the case - however,
pathconf(2) always follows symbolic links, while the 'chmod -h' doesn't.

This change adds lpathconf(3) to make it possible to solve that problem
in a clean way.

Reviewed by:	rwatson (earlier version)
Approved by:	re (kib)
2009-07-08 15:23:18 +00:00
John Baldwin
b648d4806b Change the ABI of some of the structures used by the SYSV IPC API:
- The uid/cuid members of struct ipc_perm are now uid_t instead of unsigned
  short.
- The gid/cgid members of struct ipc_perm are now gid_t instead of unsigned
  short.
- The mode member of struct ipc_perm is now mode_t instead of unsigned short
  (this is merely a style bug).
- The rather dubious padding fields for ABI compat with SV/I386 have been
  removed from struct msqid_ds and struct semid_ds.
- The shm_segsz member of struct shmid_ds is now a size_t instead of an
  int.  This removes the need for the shm_bsegsz member in struct
  shmid_kernel and should allow for complete support of SYSV SHM regions
  >= 2GB.
- The shm_nattch member of struct shmid_ds is now an int instead of a
  short.
- The shm_internal member of struct shmid_ds is now gone.  The internal
  VM object pointer for SHM regions has been moved into struct
  shmid_kernel.
- The existing __semctl(), msgctl(), and shmctl() system call entries are
  now marked COMPAT7 and new versions of those system calls which support
  the new ABI are now present.
- The new system calls are assigned to the FBSD-1.1 version in libc.  The
  FBSD-1.0 symbols in libc now refer to the old COMPAT7 system calls.
- A simplistic framework for tagging system calls with compatibility
  symbol versions has been added to libc.  Version tags are added to
  system calls by adding an appropriate __sym_compat() entry to
  src/lib/libc/incldue/compat.h. [1]

PR:		kern/16195 kern/113218 bin/129855
Reviewed by:	arch@, rwatson
Discussed with:	kan, kib [1]
2009-06-24 21:10:52 +00:00
John Baldwin
45f48220bb Deprecate the msgsys(), semsys(), and shmsys() system calls by moving
them under COMPAT_FREEBSD[4567].  Starting with FreeBSD 5.0 the SYSV IPC
API was implemented via direct system calls (e.g. msgctl(), msgget(), etc.)
rather than indirecting through the var-args *sys() system calls.  The
shmsys() system call was already effectively deprecated for all but
COMPAT_FREEBSD4 already as its implementation for the !COMPAT_FREEBSD4 case
was to simply invoke nosys().
2009-06-24 20:01:13 +00:00
John Baldwin
3c366f1f14 Add a new COMPAT7 flag for FreeBSD 7.x compatibility system calls. 2009-06-24 13:36:37 +00:00
John Baldwin
0b0fe06a5e Fix a typo in a comment. 2009-06-22 20:12:40 +00:00
John Baldwin
21def99b51 - Add the ability to mix multiple flags seperated by pipe ('|') characters
in the type field of system call tables.  Specifically, one can now use
  the 'NO*' types as flags in addition to the 'COMPAT*' types.  For example,
  to tag 'COMPAT*' system calls as living in a KLD via NOSTD.  The COMPAT*
  type is required to be listed first in this case.
- Add new functions 'type()' and 'flag()' to the embedded awk script in
  makesyscalls.sh that return true if a requested flag is found in the
  type field ($3).  The flag() function checks all of the flags in the
  field, but type() only checks the first flag.  type() is meant to be
  used in the top-level "switch" statement and flag() should be used
  otherwise.
- Retire the CPT_NOA type, it is now replaced with "COMPAT|NOARGS" using
  the flags approach.
- Tweak the comment descriptions of COMPAT[46] system calls so that they
  say "freebsd[46] foo" rather than "old foo".
- Document the COMPAT6 type.
- Sync comments in compat32 syscall table with the master table.
2009-06-17 19:50:38 +00:00
John Baldwin
0ec0b41cf6 Remove the now-unused NOIMPL flag. It serves no useful purpose given the
existing UNIMPL and NOSTD types.
2009-06-17 18:46:14 +00:00
John Baldwin
f425839118 - NOSTD results in lkmressys being used instead of lkmssys.
- Mark nfsclnt as UNIMPL.  It should have been NOSTD instead of NOIMPL back
  when it lived in nfsclient.ko, but it was removed from that a long time
  ago.
2009-06-17 18:44:15 +00:00
John Baldwin
c4f16b69e1 Add a new 'void closefrom(int lowfd)' system call. When called, it closes
any open file descriptors >= 'lowfd'.  It is largely identical to the same
function on other operating systems such as Solaris, DFly, NetBSD, and
OpenBSD.  One difference from other *BSD is that this closefrom() does not
fail with any errors.  In practice, while the manpages for NetBSD and
OpenBSD claim that they return EINTR, they ignore internal errors from
close() and never return EINTR.  DFly does return EINTR, but for the common
use case (closing fd's prior to execve()), the caller really wants all
fd's closed and returning EINTR just forces callers to call closefrom() in
a loop until it stops failing.

Note that this implementation of closefrom(2) does not make any effort to
resolve userland races with open(2) in other threads.  As such, it is not
multithread safe.

Submitted by:	rwatson (initial version)
Reviewed by:	rwatson
MFC after:	2 weeks
2009-06-15 20:38:55 +00:00
Jamie Gritton
b38ff370e4 Introduce the extensible jail framework, using the same "name=value"
interface as nmount(2).  Three new system calls are added:
* jail_set, to create jails and change the parameters of existing jails.
  This replaces jail(2).
* jail_get, to read the parameters of existing jails.  This replaces the
  security.jail.list sysctl.
* jail_remove to kill off a jail's processes and remove the jail.
Most jail parameters may now be changed after creation, and jails may be
set to exist without any attached processes.  The current jail(2) system
call still exists, though it is now a stub to jail_set(2).

Approved by:	bz (mentor)
2009-04-29 21:14:15 +00:00
Ed Schouten
a1b5a8955e Mark uname(), getdomainname() and setdomainname() with COMPAT_FREEBSD4.
Looking at our source code history, it seems the uname(),
getdomainname() and setdomainname() system calls got deprecated
somewhere after FreeBSD 1.1, but they have never been phased out
properly. Because we don't have a COMPAT_FREEBSD1, just use
COMPAT_FREEBSD4.

Also fix the Linuxolator to build without the setdomainname() routine by
just making it call userland_sysctl on kern.domainname. Also replace the
setdomainname()'s implementation to use this approach, because we're
duplicating code with sysctl_domainname().

I wasn't able to keep these three routines working in our
COMPAT_FREEBSD32, because that would require yet another keyword for
syscalls.master (COMPAT4+NOPROTO). Because this routine is probably
unused already, this won't be a problem in practice. If it turns out to
be a problem, we'll just restore this functionality.

Reviewed by:	rdivacky, kib
2008-11-09 10:45:13 +00:00
Doug Rabson
a9148abd9d Implement support for RPCSEC_GSS authentication to both the NFS client
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager.  I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.

The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.

To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.

As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.

Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.

The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.

Sponsored by:	Isilon Systems
MFC after:	1 month
2008-11-03 10:38:00 +00:00
John Baldwin
48a43ae819 Tidy up a few things with syscall generation:
- Instead of using a syscall slot (370) just to get a function prototype
  for lkmressys(), add an explicit function prototype to <sys/sysent.h>.
  This also removes unused special case checks for 'lkmressys' from
  makesyscalls.sh.
- Instead of having magic logic in makesyscalls.sh to only generate a
  function prototype the first time 'lkmnosys' is seen, make 'NODEF'
  always not generate a function prototype and include an explicit
  prototype for 'lkmnosys' in <sys/sysent.h>.
- As a result of the fix in (2), update the LKM syscall entries in
  the freebsd32 syscall table to use 'lkmnosys' rather than 'nosys'.
- Use NOPROTO for the __syscall() entry (198) in the native ABI.  This
  avoids the need for magic logic in makesyscalls.h to only generate
  a function prototype the first time 'nosys' is encountered.
2008-09-25 20:07:42 +00:00
Robert Watson
e484af13ed When MPSAFE ttys were merged, a new BSM audit event identifier was
allocated for posix_openpt(2).  Unfortunately, that identifier
conflicts with other events already allocated to other systems in
OpenBSM.  Assign a new globally unique identifier and conform
better to the AUE_ event naming scheme.

This is a stopgap until a new OpenBSM import is done with the
correct identifier, so we'll maintain this as a local diff in svn
until then.

Discussed with:	ed
Obtained from:	TrustedBSD Project
2008-08-24 21:20:35 +00:00
David E. O'Brien
35c316caaf Add comments on NOARGS, NODEF, and NOPROTO. 2008-08-21 22:57:31 +00:00
Ed Schouten
bc093719ca Integrate the new MPSAFE TTY layer to the FreeBSD operating system.
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:

- Improved driver model:

  The old TTY layer has a driver model that is not abstract enough to
  make it friendly to use. A good example is the output path, where the
  device drivers directly access the output buffers. This means that an
  in-kernel PPP implementation must always convert network buffers into
  TTY buffers.

  If a PPP implementation would be built on top of the new TTY layer
  (still needs a hooks layer, though), it would allow the PPP
  implementation to directly hand the data to the TTY driver.

- Improved hotplugging:

  With the old TTY layer, it isn't entirely safe to destroy TTY's from
  the system. This implementation has a two-step destructing design,
  where the driver first abandons the TTY. After all threads have left
  the TTY, the TTY layer calls a routine in the driver, which can be
  used to free resources (unit numbers, etc).

  The pts(4) driver also implements this feature, which means
  posix_openpt() will now return PTY's that are created on the fly.

- Improved performance:

  One of the major improvements is the per-TTY mutex, which is expected
  to improve scalability when compared to the old Giant locking.
  Another change is the unbuffered copying to userspace, which is both
  used on TTY device nodes and PTY masters.

Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.

Obtained from:		//depot/projects/mpsafetty/...
Approved by:		philip (ex-mentor)
Discussed:		on the lists, at BSDCan, at the DevSummit
Sponsored by:		Snow B.V., the Netherlands
dcons(4) fixed by:	kan
2008-08-20 08:31:58 +00:00
Julian Elischer
8b07e49a00 Add code to allow the system to handle multiple routing tables.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)

Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.

From my notes:

-----

  One thing where FreeBSD has been falling behind, and which by chance I
  have some time to work on is "policy based routing", which allows
  different
  packet streams to be routed by more than just the destination address.

  Constraints:
  ------------

  I want to make some form of this available in the 6.x tree
  (and by extension 7.x) , but FreeBSD in general needs it so I might as
  well do it in -current and back port the portions I need.

  One of the ways that this can be done is to have the ability to
  instantiate multiple kernel routing tables (which I will now
  refer to as "Forwarding Information Bases" or "FIBs" for political
  correctness reasons). Which FIB a particular packet uses to make
  the next hop decision can be decided by a number of mechanisms.
  The policies these mechanisms implement are the "Policies" referred
  to in "Policy based routing".

  One of the constraints I have if I try to back port this work to
  6.x is that it must be implemented as a EXTENSION to the existing
  ABIs in 6.x so that third party applications do not need to be
  recompiled in timespan of the branch.

  This first version will not have some of the bells and whistles that
  will come with later versions. It will, for example, be limited to 16
  tables in the first commit.
  Implementation method, Compatible version. (part 1)
  -------------------------------
  For this reason I have implemented a "sufficient subset" of a
  multiple routing table solution in Perforce, and back-ported it
  to 6.x. (also in Perforce though not  always caught up with what I
  have done in -current/P4). The subset allows a number of FIBs
  to be defined at compile time (8 is sufficient for my purposes in 6.x)
  and implements the changes needed to allow IPV4 to use them. I have not
  done the changes for ipv6 simply because I do not need it, and I do not
  have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.

  Other protocol families are left untouched and should there be
  users with proprietary protocol families, they should continue to work
  and be oblivious to the existence of the extra FIBs.

  To understand how this is done, one must know that the current FIB
  code starts everything off with a single dimensional array of
  pointers to FIB head structures (One per protocol family), each of
  which in turn points to the trie of routes available to that family.

  The basic change in the ABI compatible version of the change is to
  extent that array to be a 2 dimensional array, so that
  instead of protocol family X looking at rt_tables[X] for the
  table it needs, it looks at rt_tables[Y][X] when for all
  protocol families except ipv4 Y is always 0.
  Code that is unaware of the change always just sees the first row
  of the table, which of course looks just like the one dimensional
  array that existed before.

  The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
  are all maintained, but refer only to the first row of the array,
  so that existing callers in proprietary protocols can continue to
  do the "right thing".
  Some new entry points are added, for the exclusive use of ipv4 code
  called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
  which have an extra argument which refers the code to the correct row.

  In addition, there are some new entry points (currently called
  rtalloc_fib() and friends) that check the Address family being
  looked up and call either rtalloc() (and friends) if the protocol
  is not IPv4 forcing the action to row 0 or to the appropriate row
  if it IS IPv4 (and that info is available). These are for calling
  from code that is not specific to any particular protocol. The way
  these are implemented would change in the non ABI preserving code
  to be added later.

  One feature of the first version of the code is that for ipv4,
  the interface routes show up automatically on all the FIBs, so
  that no matter what FIB you select you always have the basic
  direct attached hosts available to you. (rtinit() does this
  automatically).

  You CAN delete an interface route from one FIB should you want
  to but by default it's there. ARP information is also available
  in each FIB. It's assumed that the same machine would have the
  same MAC address, regardless of which FIB you are using to get
  to it.

  This brings us as to how the correct FIB is selected for an outgoing
  IPV4 packet.

  Firstly, all packets have a FIB associated with them. if nothing
  has been done to change it, it will be FIB 0. The FIB is changed
  in the following ways.

  Packets fall into one of a number of classes.

  1/ locally generated packets, coming from a socket/PCB.
     Such packets select a FIB from a number associated with the
     socket/PCB. This in turn is inherited from the process,
     but can be changed by a socket option. The process in turn
     inherits it on fork. I have written a utility call setfib
     that acts a bit like nice..

         setfib -3 ping target.example.com # will use fib 3 for ping.

     It is an obvious extension to make it a property of a jail
     but I have not done so. It can be achieved by combining the setfib and
     jail commands.

  2/ packets received on an interface for forwarding.
     By default these packets would use table 0,
     (or possibly a number settable in a sysctl(not yet)).
     but prior to routing the firewall can inspect them (see below).
     (possibly in the future you may be able to associate a FIB
     with packets received on an interface..  An ifconfig arg, but not yet.)

  3/ packets inspected by a packet classifier, which can arbitrarily
     associate a fib with it on a packet by packet basis.
     A fib assigned to a packet by a packet classifier
     (such as ipfw) would over-ride a fib associated by
     a more default source. (such as cases 1 or 2).

  4/ a tcp listen socket associated with a fib will generate
     accept sockets that are associated with that same fib.

  5/ Packets generated in response to some other packet (e.g. reset
     or icmp packets). These should use the FIB associated with the
     packet being reponded to.

  6/ Packets generated during encapsulation.
     gif, tun and other tunnel interfaces will encapsulate using the FIB
     that was in effect withthe proces that set up the tunnel.
     thus setfib 1 ifconfig gif0 [tunnel instructions]
     will set the fib for the tunnel to use to be fib 1.

  Routing messages would be associated with their
  process, and thus select one FIB or another.
  messages from the kernel would be associated with the fib they
  refer to and would only be received by a routing socket associated
  with that fib. (not yet implemented)

  In addition Netstat has been edited to be able to cope with the
  fact that the array is now 2 dimensional. (It looks in system
  memory using libkvm (!)). Old versions of netstat see only the first FIB.

  In addition two sysctls are added to give:
  a) the number of FIBs compiled in (active)
  b) the default FIB of the calling process.

  Early testing experience:
  -------------------------

  Basically our (IronPort's) appliance does this functionality already
  using ipfw fwd but that method has some drawbacks.

  For example,
  It can't fully simulate a routing table because it can't influence the
  socket's choice of local address when a connect() is done.

  Testing during the generating of these changes has been
  remarkably smooth so far. Multiple tables have co-existed
  with no notable side effects, and packets have been routes
  accordingly.

  ipfw has grown 2 new keywords:

  setfib N ip from anay to any
  count ip from any to any fib N

  In pf there seems to be a requirement to be able to give symbolic names to the
  fibs but I do not have that capacity. I am not sure if it is required.

  SCTP has interestingly enough built in support for this, called VRFs
  in Cisco parlance. it will be interesting to see how that handles it
  when it suddenly actually does something.

  Where to next:
  --------------------

  After committing the ABI compatible version and MFCing it, I'd
  like to proceed in a forward direction in -current. this will
  result in some roto-tilling in the routing code.

  Firstly: the current code's idea of having a separate tree per
  protocol family, all of the same format, and pointed to by the
  1 dimensional array is a bit silly. Especially when one considers that
  there is code that makes assumptions about every protocol having the
  same internal structures there. Some protocols don't WANT that
  sort of structure. (for example the whole idea of a netmask is foreign
  to appletalk). This needs to be made opaque to the external code.

  My suggested first change is to add routing method pointers to the
  'domain' structure, along with information pointing the data.
  instead of having an array of pointers to uniform structures,
  there would be an array pointing to the 'domain' structures
  for each protocol address domain (protocol family),
  and the methods this reached would be called. The methods would have
  an argument that gives FIB number, but the protocol would be free
  to ignore it.

  When the ABI can be changed it raises the possibilty of the
  addition of a fib entry into the "struct route". Currently,
  the structure contains the sockaddr of the desination, and the resulting
  fib entry. To make this work fully, one could add a fib number
  so that given an address and a fib, one can find the third element, the
  fib entry.

  Interaction with the ARP layer/ LL layer would need to be
  revisited as well. Qing Li has been working on this already.

  This work was sponsored by Ironport Systems/Cisco

Reviewed by:    several including rwatson, bz and mlair (parts each)
Obtained from:  Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
Konstantin Belousov
7104518b07 Add the openat(), fexecve() and other *at() syscalls to the table.
Based on the submission by rdivacky,
	sponsored by Google Summer of Code 2007
Reviewed by:	rwatson, rdivacky
Tested by:	pho
2008-03-31 12:06:55 +00:00
Doug Rabson
dfdcada31e Add the new kernel-mode NFS Lock Manager. To use it instead of the
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.

Highlights include:

* Thread-safe kernel RPC client - many threads can use the same RPC
  client handle safely with replies being de-multiplexed at the socket
  upcall (typically driven directly by the NIC interrupt) and handed
  off to whichever thread matches the reply. For UDP sockets, many RPC
  clients can share the same socket. This allows the use of a single
  privileged UDP port number to talk to an arbitrary number of remote
  hosts.

* Single-threaded kernel RPC server. Adding support for multi-threaded
  server would be relatively straightforward and would follow
  approximately the Solaris KPI. A single thread should be sufficient
  for the NLM since it should rarely block in normal operation.

* Kernel mode NLM server supporting cancel requests and granted
  callbacks. I've tested the NLM server reasonably extensively - it
  passes both my own tests and the NFS Connectathon locking tests
  running on Solaris, Mac OS X and Ubuntu Linux.

* Userland NLM client supported. While the NLM server doesn't have
  support for the local NFS client's locking needs, it does have to
  field async replies and granted callbacks from remote NLMs that the
  local client has contacted. We relay these replies to the userland
  rpc.lockd over a local domain RPC socket.

* Robust deadlock detection for the local lock manager. In particular
  it will detect deadlocks caused by a lock request that covers more
  than one blocking request. As required by the NLM protocol, all
  deadlock detection happens synchronously - a user is guaranteed that
  if a lock request isn't rejected immediately, the lock will
  eventually be granted. The old system allowed for a 'deferred
  deadlock' condition where a blocked lock request could wake up and
  find that some other deadlock-causing lock owner had beaten them to
  the lock.

* Since both local and remote locks are managed by the same kernel
  locking code, local and remote processes can safely use file locks
  for mutual exclusion. Local processes have no fairness advantage
  compared to remote processes when contending to lock a region that
  has just been unlocked - the local lock manager enforces a strict
  first-come first-served model for both local and remote lockers.

Sponsored by:	Isilon Systems
PR:		95247 107555 115524 116679
MFC after:	2 weeks
2008-03-26 15:23:12 +00:00
Ruslan Ermilov
7f64829a5e Fixed type of the fourth argument of cpuset_{get,set}affinity(2) to be size_t.
Prodded by:	davidxu
2008-03-25 09:11:53 +00:00
Jeff Roberson
6617724c5f Remove kernel support for M:N threading.
While the KSE project was quite successful in bringing threading to
FreeBSD, the M:N approach taken by the kse library was never developed
to its full potential.  Backwards compatibility will be provided via
libmap.conf for dynamically linked binaries and static binaries will
be broken.
2008-03-12 10:12:01 +00:00
Jeff Roberson
d7f687fc9b Add cpuset, an api for thread to cpu binding and cpu resource grouping
and assignment.
 - Add a reference to a struct cpuset in each thread that is inherited from
   the thread that created it.
 - Release the reference when the thread is destroyed.
 - Add prototypes for syscalls and macros for manipulating cpusets in
   sys/cpuset.h
 - Add syscalls to create, get, and set new numbered cpusets:
   cpuset(), cpuset_{get,set}id()
 - Add syscalls for getting and setting affinity masks for cpusets or
   individual threads: cpuid_{get,set}affinity()
 - Add types for the 'level' and 'which' parameters for the cpuset.  This
   will permit expansion of the api to cover cpu masks for other objects
   identifiable with an id_t integer.  For example, IRQs and Jails may be
   coming soon.
 - The root set 0 contains all valid cpus.  All thread initially belong to
   cpuset 1.  This permits migrating all threads off of certain cpus to
   reserve them for special applications.

Sponsored by:	Nokia
Discussed with:	arch, rwatson, brooks, davidxu, deischen
Reviewed by:	antoine
2008-03-02 07:39:22 +00:00
Ruslan Ermilov
5f56182b6f Change readlink(2)'s return type and type of the last argument
to match POSIX.

Prodded by:	Alexey Lyashkov
2008-02-12 20:09:04 +00:00
Robert Watson
6c902059f2 Use audit events AUE_SHMOPEN and AUE_SHMUNLINK with new system calls
shm_open() and shm_unlink().  More auditing will need to be done for
these calls to capture arguments properly.
2008-01-20 23:43:06 +00:00
John Baldwin
8e38aeff17 Add a new file descriptor type for IPC shared memory objects and use it to
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
  object which provides the backing store.  Each descriptor starts off with
  a size of zero, but the size can be altered via ftruncate(2).  The shared
  memory file descriptors also support fstat(2).  read(2), write(2),
  ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
  memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
  manage shared memory file descriptors.  The virtual namespace that maps
  pathnames to shared memory file descriptors is implemented as a hash
  table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
  of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
  path argument to shm_open(2).  In this case, an unnamed shared memory
  file descriptor will be created similar to the IPC_PRIVATE key for
  shmget(2).  Note that the shared memory object can still be shared among
  processes by sharing the file descriptor via fork(2) or sendmsg(2), but
  it is unnamed.  This effectively serves to implement the getmemfd() idea
  bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
  collected when they are not referenced by any open file descriptors or
  the shm_open(2) virtual namespace.

Submitted by:	dillon, peter (previous versions)
Submitted by:	rwatson (I based this on his version)
Reviewed by:	alc (suggested converting getmemfd() to shm_open())
2008-01-08 21:58:16 +00:00
Ed Maste
7188e3c834 Put comments about syscalls by the correct ones, and use the correct syscall
number in the comment.
2007-10-19 19:17:53 +00:00
David Xu
0b1f0611b4 Add thr_kill2 syscall which sends a signal to a thread in another process.
Submitted by: Tijl Coosemans tijl at ulyssis dot org
Approved by: re (kensmith)
2007-08-16 05:26:42 +00:00
Peter Wemm
51504d9ac4 Create new syscalls for mmap(), lseek(), pread(), pwrite(), truncate() and
ftruncate(), but without the pad arg.

There are several reasons for this.  Consider 'mmap()'.  On AMD64, the
function call (and syscall) ABI allow for 6 register arguments.  Additional
arguments go on the stack.  mmap(2) has 6 arguments.  However, the syscall
definition has an extra 'int pad' argument.  This pushes it to 7 arguments,
which means one must spill into the memory stack.  Since the kernel API
doesn't match userland API, we have a hack in libc - libc/sys/mmap.c.
This implements the userland API by calling __syscall() with an extra
argument and the pad argument, for a total of 8 args.  This is all
unnecessary and inconvenient for several things, including the kernel's
syscall handler code which now has to handle merging stack arguments with
register arguments.  It is a big deal for certain 3rd party code.

I'm adding libc glue to make the transition totally painless.  I had
intended to mark the old syscalls as COMPAT6, but the potential to shoot
your feet by building a new kernel without COMPAT_FREEBSD6 but with a
slighly older userland was too great.  For now, they have manual
"freebsd6_" prefixes rather than being COMPAT6.  They will go back to
being marked 'COMPAT6' after 7-stable starts.

Approved by: re (kensmith)
2007-07-04 22:47:37 +00:00
Randall Stewart
f8829a4a40 Ok, here it is, we finally add SCTP to current. Note that this
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.com
tuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0

So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.

I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)

There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..

If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)

Reviewed by:	gnn
Approved by:	gnn
2006-11-03 15:23:16 +00:00
David Xu
5f641fc0fb o Add keyword volatile for user mutex owner field.
o Fix type consistent problem by using type long for old
  umtx and wait channel.
o Rename casuptr to casuword.
2006-10-17 02:24:47 +00:00
Robert Watson
888db9e177 Audit creat() system call (compat code), and change type for getpagesize(),
which isn't actually being audited anyway.

MFC after:	3 days
Obtained from:	TrustedBSD Project
2006-10-03 20:46:52 +00:00
David Xu
73fa3e5b88 Replace system call thr_getscheduler, thr_setscheduler, thr_setschedparam
with rtprio_thread, while rtprio system call is for process only, the new
system call rtprio_thread is responsible for LWP.
2006-09-21 04:18:46 +00:00
Robert Watson
6c2d307a0e AUE_SIGALTSTACK instead of AUE_SIGPENDING for sigaltstack().
Obtained from:	TrustedBSD Project
MFC after:	3 days
2006-09-17 13:28:11 +00:00
Robert Watson
7f26ddda62 Assign proper audit event identifiers to a number of system calls not
covered in previous passes:

- sysarch, rtprio
- clock_settime
- preadv/pwritev
- __getcwd
- kqueue
- fhstatfs
- kldunloadf

Obtained from:	TrustedBSD Project
2006-09-03 15:10:40 +00:00
Robert Watson
d1967c5d2c Use AUE_NTP_ADJTIME for ntp_adjtime() instead of AUE_ADJTIME.
Obtained from:	TrustedBSD Project
2006-09-03 13:44:21 +00:00
David Xu
d10183d94d This is initial version of POSIX priority mutex support, a new userland
mutex structure is added as following:
struct umutex {
        __lwpid_t       m_owner;
        uint32_t        m_flags;
        uint32_t        m_ceilings[2];
        uint32_t        m_spare[4];
};
The m_owner represents owner thread, it is a thread id, in non-contested
case, userland can simply use atomic_cmpset_int to lock the mutex, if the
mutex is contested, high order bit will be set, and userland should do locking
and unlocking via kernel syscall. Flag UMUTEX_PRIO_INHERIT represents
pthread's PTHREAD_PRIO_INHERIT mutex, which when contention happens, kernel
should do priority propagating. Flag UMUTEX_PRIO_PROTECT indicates it is
pthread's PTHREAD_PRIO_PROTECT mutex, userland should initialize m_owner
to contested state UMUTEX_CONTESTED, then atomic_cmpset_int will be failure
and kernel syscall should be invoked to do locking, this becauses
for such a mutex, kernel should always boost the thread's priority before
it can lock the mutex, m_ceilings is used by PTHREAD_PRIO_PROTECT mutex,
the first element is used to boost thread's priority when it locked the mutex,
second element is used when the mutex is unlocked, the PTHREAD_PRIO_PROTECT
mutex's link list is kept in userland, the m_ceiling[1] is managed by thread
library so kernel needn't allocate memory to keep the link list, when such
a mutex is unlocked, kernel reset m_owner to UMUTEX_CONTESTED.
Flag USYNC_PROCESS_SHARED indicate if the synchronization object is process
shared, if the flag is not set, it saves a vm_map_lookup() call.

The umtx chain is still used as a sleep queue, when a thread is blocked on
PTHREAD_PRIO_INHERIT mutex, a umtx_pi is allocated to support priority
propagating, it is dynamically allocated and reference count is used,
it is not optimized but works well in my tests, while the umtx chain has
its own locking protocol, the priority propagating protocol are all protected
by sched_lock because priority propagating function is called with sched_lock
held from scheduler.

No visible performance degradation is found which these changes. Some parameter
names in _umtx_op syscall are renamed.
2006-08-28 04:24:51 +00:00
Peter Wemm
bad9a7a5f9 Grab two syscall numbers. One is used to emulate functionality that linux
has in its procfs (do a readlink of /proc/self/fd/<nn> to find the pathname
that corresponds to a given file descriptor).  Valgrind-3.x needs this
functionality.  This is a placeholder only at this time.
2006-08-16 22:32:50 +00:00
John Baldwin
589201fd4e - Use NOSTD rather than NOIMPL for nfssvc() to match other syscalls
provided via klds.
- Correct audit identifier for nfssvc().
2006-08-15 16:45:41 +00:00
John Baldwin
af5bf12239 Now that all system calls are MPSAFE, retire the SYF_MPSAFE flag used to
mark system calls as being MPSAFE:
- Stop conditionally acquiring Giant around system call invocations.
- Remove all of the 'M' prefixes from the master system call files.
- Remove support for the 'M' prefix from the script that generates the
  syscall-related files from the master system call files.
- Don't explicitly set SYF_MPSAFE when registering nfssvc.
2006-07-28 19:05:28 +00:00
John Baldwin
e0b4add8d8 Various fixes to comments in the syscall master files including removing
cruft from the audit import and adding mention of COMPAT4 to freebsd32.
2006-07-28 18:55:18 +00:00
David Xu
60088160c9 Add syscalls thr_setscheduler, thr_getscheduler, and thr_setschedparam,
these syscalls are designed to set thread's scheduling parameters and
policy, because each syscall contains a size parameter, it is possible
to support future scheduling option, e.g SCHED_SPORADIC, this option
needs other fields in structure sched_param, current they are not
avaiblable.
2006-07-13 06:26:43 +00:00
John Baldwin
be5747d5b5 - Add conditional VFS Giant locking to getdents_common() (linux ABIs),
ibcs2_getdents(), ibcs2_read(), ogetdirentries(), svr4_sys_getdents(),
  and svr4_sys_getdents64() similar to that in getdirentries().
- Mark ibcs2_getdents(), ibcs2_read(), linux_getdents(), linux_getdents64(),
  linux_readdir(), ogetdirentries(), svr4_sys_getdents(), and
  svr4_sys_getdents64() MPSAFE.
2006-07-11 20:52:08 +00:00
Wayne Salamon
bbe5d0318d Add audit events for the extended attribute system calls.
Obtained from: TrustedBSD Project
Approved by: rwatson (mentor)
2006-07-05 15:46:02 +00:00
John Baldwin
597d608f86 - Expand the scope of Giant some in mount(2) to protect the vfsp structure
from going away.  mount(2) is now MPSAFE.
- Expand the scope of Giant some in unmount(2) to protect the mp structure
  (or rather, to handle concurrent unmount races) from going away.
  umount(2) is now MPSAFE, as well as linux_umount() and linux_oldumount().
- nmount(2) and linux_mount() were already MPSAFE.
2006-06-27 14:46:31 +00:00
Dag-Erling Smørgrav
867c089bc7 Revert previous commit at davidxu's insistance. Instead, use __DECONST
(argh!) and rearrange the prototypes to make it clear that _umtx_op()
is not deprecated.
2006-03-28 14:32:38 +00:00
Dag-Erling Smørgrav
b3efbabe87 The undocumented and deprecated system call _umtx_op() takes two pointer
arguments.  The first one is never used (all callers pass in 0); the
second is sometimes used to pass in a struct timespec * which is used as
a timeout and never modified.  Constify that argument so callers can pass
a const struct timespec * without jumping through hoops.
2006-03-28 09:18:34 +00:00