Commit Graph

36 Commits

Author SHA1 Message Date
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
John Dyson
8b612c4b4a This commit is the embodiment of some VFS read clustering improvements.
Firstly, now our read-ahead clustering is on a file descriptor basis and not
on a per-vnode basis.  This will allow multiple processes reading the
same file to take advantage of read-ahead clustering.  Secondly, there
previously was a problem with large reads still using the ramp-up
algorithm.  Of course, that was bogus, and now we read the entire
"chunk" off of the disk in one operation.   The read-ahead clustering
algorithm should use less CPU than the previous also (I hope :-)).

NOTE:  THAT LKMS MUST BE REBUILT!!!
1996-12-29 02:45:28 +00:00
Bruce Evans
b8b6f5017f Fixed nonexistent checking of lock types for F_GETLK.
Found by:	NIST-PCTS
1996-12-19 19:59:51 +00:00
Bruce Evans
bb65f5a1cc Fixed lseek() on named pipes. It always succeeded but should always fail.
Broke locking on named pipes in the same way as locking on non-vnodes
(wrong errno).  This will be fixed later.

The fix involves negative logic.  Named pipes are now distinguished from
other types of files with vnodes, and there is additional code to handle
vnodes and named pipes in the same way only where that makes sense (not
for lseek, locking or TIOCSCTTY).
1996-12-19 19:42:37 +00:00
Bruce Evans
efebc4ab84 Fixed bitrot in the read-only attribute:
- kern.maxfilesperproc was read-only (and thus essentially useless).

Removed unused #includes.  Strength-reduced used #includes.
1996-09-28 16:33:21 +00:00
Sujal Patel
de71b88098 Fix fdavail() so that correctly pays attention to the rlimit.
Fixes unp_externalize panic which occurs when a process is at it's
ulimit for file descriptors and tries to receive a file descriptor from
another process.

Reviewed by:	wollman
1996-08-15 16:33:32 +00:00
Bill Paul
8a095c52ed Add a couple of #ifdef DEVFS/#endif clauses to slence the following
compiler warnings which occur if you don't have 'options DEVFS' in
your kernel config file:

../../kern/kern_descrip.c: In function `fildesc_drvinit':
../../kern/kern_descrip.c:1103: warning: unused variable `fd'
../../kern/kern_descrip.c: At top level:
../../kern/kern_descrip.c:1095: warning: `devfs_token_stdin' defined but not use
d
../../kern/kern_descrip.c:1096: warning: `devfs_token_stdout' defined but not us
ed
../../kern/kern_descrip.c:1097: warning: `devfs_token_stderr' defined but not us
ed
../../kern/kern_descrip.c:1098: warning: `devfs_token_fildesc' defined but not u
sed
1996-06-17 16:54:03 +00:00
Gary Palmer
c23670e294 Clean up -Wunused warnings.
Reviewed by:		bde
1996-06-12 05:11:41 +00:00
Bruce Evans
8fb3332429 Fixed the unit numbers of the devfs `fd' devices.
Made the devfs `fd' devices bug for bug compatible with the ones created
by MAKEDEV:
- ownership is bin.bin, not root.wheel, except for std*.  The devfsext
  interface doesn't seem to allow specifying the ownership of /devfs/fd,
  so it's still incompatible.
- std* aren't links to fd/[0-2].
1996-03-27 19:19:58 +00:00
Jeffrey Hsu
4b50ceef3b Merge in Lite2: LIST replacement for f_filef, f_fileb, and filehead.
Did not accept change of second argument to ioctl from int to u_long.
Reviewed by:	davidg & bde
1996-03-11 02:17:30 +00:00
Peter Wemm
dabee6fecc kern_descrip.c: add fdshare()/fdcopy()
kern_fork.c: add the tiny bit of code for rfork operation.
kern/sysv_*: shmfork() takes one less arg, it was never used.
sys/shm.h: drop "isvfork" arg from shmfork() prototype
sys/param.h: declare rfork args.. (this is where OpenBSD put it..)
sys/filedesc.h: protos for fdshare/fdcopy.
vm/vm_mmap.c: add minherit code, add rounding to mmap() type args where
it makes sense.
vm/*: drop unused isvfork arg.

Note: this rfork() implementation copies the address space mappings,
it does not connect the mappings together.  ie: once the two processes
have split, the pages may be shared, but the address space is not. If one
does a mmap() etc, it does not appear in the other.  This makes it not
useful for pthreads, but it is useful in it's own right for having
light-weight threads in a static shared address space.

Obtained from: Original by Ron Minnich, extended by OpenBSD
1996-02-23 18:49:25 +00:00
John Dyson
2834ceec7c Improve the performance for pipe(2) again. Also include some
fixes for previous version of new pipes from Bruce Evans.  This
new version:

Supports more properly the semantics of select (BDE).
Supports "OLD_PIPE" correctly (kern_descrip.c, BDE).
Eliminates incorrect EPIPE returns (bash 'pipe broken' messages.)
Much faster yet, currently tuned relatively conservatively -- but now
	gives approx 50% more perf than the new pipes code did originally.
	(That was about 50% more perf than the original BSD pipe code.)

Known bugs outstanding:
	No support for async io (SIGIO).  Will be included soon.

Next to do:
	Merge support for FIFOs.

Submitted by: bde
1996-02-04 19:56:35 +00:00
John Dyson
f982721359 Enable the new fast pipe code. The old pipes can be used with the
"OLD_PIPE" config option.
1996-01-28 23:41:40 +00:00
Poul-Henning Kamp
87b6de2b76 A Major staticize sweep. Generates a couple of warnings that I'll deal
with later.
A number of unused vars removed.
A number of unused procs removed or #ifdefed.
1995-12-14 08:32:45 +00:00
Poul-Henning Kamp
d2f265fab8 Julian forgot to make the *devsw structures static. 1995-12-08 23:23:00 +00:00
Julian Elischer
87f6c6625d Pass 3 of the great devsw changes
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)

If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)

pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
David Greenman
efeaf95a41 Untangled the vm.h include file spaghetti. 1995-12-07 12:48:31 +00:00
Bruce Evans
4cb03b1b55 Include <vm/vm.h> or <vm/vm_page.h> explicitly to avoid breaking when
vnode_if.h doesn't include vm stuff.
1995-12-05 21:51:45 +00:00
Poul-Henning Kamp
946bb7a268 A major sweep over the sysctl stuff.
Move a lot of variables home to their own code (In good time before xmas :-)

Introduce the string descrition of format.

Add a couple more functions to poke into these marvels, while I try to
decide what the correct interface should look like.

Next is adding vars on the fly, and sysctl looking at them too.

Removed a tine bit of defunct and #ifdefed notused code in swapgeneric.
1995-12-04 16:48:58 +00:00
Bruce Evans
98d938220c Completed function declarations and/or added prototypes. 1995-12-02 18:58:56 +00:00
Julian Elischer
7198bf4725 If you're going to mechanically replicate something in 50 files
it's best to not have a (compiles cleanly) typo in it! (sigh)
1995-11-29 14:41:20 +00:00
Julian Elischer
53ac6efbd8 OK, that's it..
That's EVERY SINGLE driver that has an entry in conf.c..
my next trick will be to define cdevsw[] and bdevsw[]
as empty arrays and remove all those DAMNED defines as well..

Each of these drivers has a SYSINIT linker set entry
that comes in very early.. and asks teh driver to add it's own
entry to the two devsw[] tables.

some slight reworking of the commits from yesterday (added the SYSINIT
stuff and some usually wrong but token DEVFS entries to all these
devices.

BTW does anyone know where the 'ata' entries in conf.c actually reside?
seems we don't actually have a 'ataopen() etc...

If you want to add a new device in conf.c
please  make sure I know
so I can keep it up to date too..

as before, this is all dependent on #if defined(JREMOD)
(and #ifdef DEVFS in parts)
1995-11-29 10:49:16 +00:00
Poul-Henning Kamp
18e6fe0250 Add new-style sysctl for KERN_FILE here. 1995-11-14 08:58:35 +00:00
Bruce Evans
d2d3e8751c Included <sys/sysproto.h> to get central declarations for syscall args
structs and prototypes for syscalls.

Ifdefed duplicated decentralized declarations of args structs.  It's
convenient to have this visible but they are hard to maintain.  Some
are already different from the central declarations.  4.4lite2 puts
them in comments in the function headers but I wanted to avoid the
large changes for that.
1995-11-12 06:43:28 +00:00
David Greenman
079cc25b11 Killed a few gratuitous #include's. 1995-10-21 08:38:13 +00:00
Steven Wallace
ad7507e248 Remove prototype definitions from <sys/systm.h>.
Prototypes are located in <sys/sysproto.h>.

Add appropriate #include <sys/sysproto.h> to files that needed
protos from systm.h.

Add structure definitions to appropriate files that relied on sys/systm.h,
right before system call definition, as in the rest of the kernel source.

In kern_prot.c, instead of using the dummy structure "args", create
individual dummy structures named <syscall>_args.  This makes
life easier for prototype generation.
1995-10-08 00:06:22 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Bruce Evans
3aa12267a5 Add and move declarations to fix all of the warnings from `gcc -Wimplicit'
(except in netccitt, netiso and netns) that I didn't notice when I fixed
"all" such warnings before.
1995-03-28 07:58:53 +00:00
Guido van Rooij
e6373c9ec0 Implement maxprocperuid and maxfilesperproc. They are tunable
via sysctl(8). The initial value of maxprocperuid is maxproc-1,
that of maxfilesperproc is maxfiles (untill maxfile will disappear)

Now it is at least possible to prohibit one user opening maxfiles

-Guido

Submitted by:
Obtained from:
1995-02-20 19:42:42 +00:00
Bruce Evans
20989d2d64 Obtained from: my fix for 1.1.5
Remove compatibility hack so that dup(fd) isn't interpreted as
dup2(fd & 0x3f, random_junk_on_stack_fd) when (fd & 0x3f) != 0.
1994-12-12 12:27:39 +00:00
Poul-Henning Kamp
797f2d22f0 All of this is cosmetic. prototypes, #includes, printfs and so on. Makes
GCC a lot more silent.
1994-10-02 17:35:40 +00:00
Poul-Henning Kamp
bb56ec4a05 While in the real world, I had a bad case of being swapped out for a lot of
cycles.  While waiting there I added a lot of the extra ()'s I have, (I have
never used LISP to any extent).  So I compiled the kernel with -Wall and
shut up a lot of "suggest you add ()'s", removed a bunch of unused var's
and added a couple of declarations here and there.  Having a lap-top is
highly recommended.  My kernel still runs, yell at me if you kernel breaks.
1994-09-25 19:34:02 +00:00
David Greenman
b36a2ba1ce munmapfd() was being called with one too few params - bug introduced
during my initial kernel port.
1994-09-02 10:17:30 +00:00
David Greenman
3c4dd3568f Added $Id$ 1994-08-02 07:55:43 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Rodney W. Grimes
df8bae1de4 BSD 4.4 Lite Kernel Sources 1994-05-24 10:09:53 +00:00