generate_fat.sh does the following:
- create an 800kb zero-filled file
- create an md device backed by this file
- format the device fat12
- mount the filesystem
- create the EFI ESP directory structure
- create the EFI boot file (BOOTx64 for amd64, BOOTaa64 for aarch64, etc)
- Adds a marker to the beginning of the file, and pad it to 384kb
- 384kb was chosen as it is less than half of 800kb, thus allowing
users to keep a backup of their older boot file in the small partition
- Unmount the filesystem
- Scan the image and find the offset where the marker was inserted
- The process requires root, to make image generation easier, images for
each architecture are pregenerated, compressed with xz, and checked
into svn.
The Makefile that generates boot1.efifat does the following:
- Ensure the compiled boot1.efi file is no larger than the generated image
- Decompress the template created by generate-fat.sh
- dd the contents of boot1.efi into boot1.efifat starting at the offset
where the marker is found. This allows any file less than the maximum
size to be written into the fat filesystem without having to mount it,
so no root privileges are required.
Later work by imp and myself makes bsdinstall create a 200mb fat16 instead
of using this process, but it is retained to make image generation easier.
Submitted by: Eric McCorkle (original version)
Reviewed by: emaste, tsoome, Eric McCorkle
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9680
The zfsonlinux feature large_dnode is not yet supported by the loader.
Reviewed by: avg, allanjude
Differential Revision: https://reviews.freebsd.org/D12288
This Makefile relies on Makefile.fat providing the correct value for
BOOT1_MAXSIZE and BOOT1_OFFSET. Since BOOT1_OFFSET had no default value
here the build would already fail if Makefile.fat did not provide
correct values.
Sponsored by: The FreeBSD Foundation
In advance of other changes to the fat template generation process, have
generate-fat.sh create all template files at the same time so that they
cannot get out of sync.
Also correct a longstanding but where BOOT1_OFFSET was overwritten on
each invocation. A previous version of this patch stored a per-arch
offset (e.g. BOOT1_arm64_OFFSET) but that was deemed unnecessary.
Instead just hardcode the known offset that applies to all archs (0x2d)
and fail if the offset happens to be different.
Ongiong work (using newfs_msdos in bsdinstall and adding msdosfs support
to makefs) will eventually allow us to do away with this fat template
hack altogether, but in the near term we have a few improvements that
will build on this.
Reviewed by: allanjude, imp, Eric McCorkle
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10931
Since the efipart rewrite, the chain command was looking for device
handle using interface applicable only for net devices. Disk
partitions and zfs pools need their own approach to find the proper handle.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D12287
We need to extend the -Wno-format hack to yet another Makefile to cope
with %S meaning (CHAR16 *) not (wchar_t *) in the context of the EFI
boot loaders.
Sponsored by: Netflix
Rename boot1's wcslen to ucs2len, which we can't use in userland
because wchar in userland is unsigned, not short. Move it into
efichar.c. Also spell '* 2' as '* sizeof(efi_char)' and add 1 for the
trailing NUL to transition the FreeBSD boot env vars to being NUL
terminated on the same line...
Sponsored by: Netflix
AMD Family 17h CPUs have an internal network used to communicate between
the host CPU and the PSP and SMU coprocessors. It exposes a simple
32-bit register space.
Reviewed by: avg (no +1), mjoras, truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12217
FreeBSD loader expects to have mmsz variable set by bootloader.
U-Boot behaviour is that if buffer size is not big enough to keep
whole memory map, assign the smallest correct buffer size to sz
and return error.
In other words U-Boot assumes that nobody will need mmsz value when buffer
is not filled with memory map, which is not true, so calculated pages value
was too big to allocate.
Solution: Simply assign default value to mmsz.
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12194
Record the file path for boot1.efi as the UEFI environemnt variable
FreeBSDBootVarGUID:Boot1Path. Record the device this came from as
FreeBSDBootVarGUID:Boot1Dev. While later stages of the boot may be
able to guess these values by retrieving UEFIGlobal:BootCurrent and
groveling through the correct UEFIGlobal:BootXXXX, this provides
certanty in the face of behavior from any part of the boot loader
chain that might "guess" what to do next. These env variables are
volatile and will disappear on reboot.
Sponsored by: Netflix
In the FreeBSD UEFI boot protocol, boot1.efi exits back to UEFI if it
can't boot the image for most reasons (so that further items in the
EFI boot manger list can be tried). Rename panic to efi_panic, make it
static and give it an extra status argument. Exit back to UEFI with
that status argument so the next loader can be tried.
Use malloc/free exclusively instead of mixing malloc/free and
AllocatePool/FreePool. The code is smaller.
Sponsored by: Netflix
Print the device that boot1.efi was loaded from. Print the path as
well (since it isn't included in DeviceHandle). Move block where we do
this earlier so all the block handle code is now together.
Sponsored by: Netflix
Make efichar.c routines available to libefi as well as
libefivar. Define LIBEFI when building so we can conditionally include
stand.h vs the normal userland stuff.
Use efi_devpath_match instead of device_paths_match. They are
functionally the same. Remove device_paths_match from boot1.c and call
efi_devpath_match instead.
Sponsored by: Netflix
Kill our own hand-rolled (and somewhat flawed) devpath_str in favor of
the recently added efi_devpath_str in libefi. This gives us much
better names at the expense of not being able to debug on EFI 1.2
machines (since the UEFI protocol efi_devpath_str depends on was added
in UEFI 2.0). However, this isn't the first thing that requires newer
than EFI 1.2, so it's quite possible that this doesn't change the
universe of machines we can EFI boot from. This will now give us the
full UEFI path, even for devices we don't yet know about. More
importantly, it gives us the full HD(...) part of the path, which is
sufficient by itself to locate disks that follow the rules (dd one
disk (but not partition) to another still needs the rest of the path
to disambiguate, but that isn't following the rules that require every
GPT table to have globally unique GUIDs for every partion).
This also has the side effect of shrinking boot1.efi by ~3k.
Sponsored by: Netflix
Add libefi to the list of libraries we'll link in. Move EFI table
definitions back to libefi so we don't have drift between the two
efi_main routines.
Sponsored by: Netflix
Cast ctxp to caddr_t to pass data as expected. While void * is a
universal type, char * isn't (and that's what caddr_t is defined as).
One could argue these prototypes should take void * rather than
caddr_t, but changing that is much more invasive.
Sponsored by: Netflix
Make the return type of efi_main uniform. Declare the Exit() function
as not returning. Move efi_main's declaration to the proper header.
Sponsored by: Netflix
Move the efi_main routine out of libefi into sys/boot/efi/loader.
Since boot1 has its own efi_main routine, this effectively prevents
boot1 from linking with libefi. By moving it out, we can share code
better (though though some refactoring with boot1's efi_main and
loader.efi's efi_main is definitely in order).
Sponsored by: Netflix
Using latest U-Boot for RPI 1 or 2 the DTB loaded by the firmware is discarded.
The DTB was previously patched by the firmware to contain the DMA channel mask.
DTB provided by the rpi firmware or DTS in the Linux tree contain the raw value
directly. Do the same for our DTS as we cannot switch to the upstream ones yet.
Not having the DMA channel mask setup properly cause mmc not to be detected
(and probably other problems on driver using DMA).
Also, add links for rpi dtb to the name used by u-boot. This way the dtb can be
loaded by ubldr using the U-Boot env variable fdtfile.
Tested On: RPI B Rev2, RPI Zero, RPI 2 v1.1 RPI 2 v1.2
Thanks to Sylvain Garrigues <sylvain@sylvaingarrigues.com> for the help.
PR: 218344
New version is not compatible on supervisor mode with v1.9.1
(previous version).
Highlights:
o BBL (Berkeley Boot Loader) provides no initial page tables
anymore allowing us to choose VM, to build page tables manually
and enable MMU in S-mode.
o SBI interface changed.
o GENERIC kernel.
FDT is now chosen standard for RISC-V hardware description.
DTB is now provided by Spike (golden model simulator). This
allows us to introduce GENERIC kernel. However, description
for console and timer devices is not provided in DTB, so move
these devices temporary to nexus bus.
o Supervisor can't access userspace by default. Solution is to
set SUM (permit Supervisor User Memory access) bit in sstatus
register.
o Compressed extension is now turned on by default.
o External GCC 7.1 compiler used.
o _gp renamed to __global_pointer$
o Compiler -march= string is now in use allowing us to choose
required extensions (compressed, FPU, atomic, etc).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11800
The amd64 build of boot2 was failing with gcc 6.3.0 due to being more
than 1 kB too large. It was apparently generating a .eh_frame section
which was not being removed by objcopy -S. The .eh_frame section seems
to be mandatory per the amd64 ABI, but boot2 is compiled for i386 (uses
-m32), and therefore should be optional in this context. Suppress
generation of .eh_frame with the -fno-asynchronous-unwind-tables flag to
gcc. This saves 1348 bytes (the limit is 7680 bytes).
Reviewed by: dim, imp
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11928
Since the cache controller nodes fixup is added to the platform code,
this patch aligns it to the Linux device tree representation.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11884
Since the timers' base frequency setting is added to the platform code,
this patch removes clock-frequency properties from global
and twd timers, aligning both to the Linux device tree.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11882
Because fdt_get_ranges can process now multiple 'ranges' entries,
restoring the ranges from original Linux device trees is possible.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11877
libefi/time.c is mix of different styles, this update does cleanup.
Also fix 0 versus NULL, and zero the tv structure for case we get error
from UEFI firmware.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D11861
This patch moves code necessary for the fmtdev functionality from
loader to libefi, allowing other applications to make use of it
Submitted by: Eric McCorkle
Differential Revision: https://reviews.freebsd.org/D11862
